Home > HAND TOOLS > SAFETY & ORGANIZATION > TOOL STORAGE > WORK SUPPORT
Sort By:
1
GLASSES SAFETY VISITORS CLEAR Tool Works 1152 Full Round Bucket Tray GLASSES SAFETY CLEAR/PINK
Features high impact scratch resistant polycarbonate lenses and non-slip temples. Provides 99.9% UV protection. Meets ANSI Z87.1+safety standards. Unique ``Pop-Up" carrying handle, stack or nest trays inside standard. 2-1/2"H. Stack or nest trays inside a standard 3-1/2 to 5 gallon bucket. Specifically designed to fit smaller, narrower faces. These include a deep temple design that provides good side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
SHIELD FACE CLEAR REPL15.5X8IN GLASSES SAFETY BLUE MIRROR    FACE SHIELD GREEN UNIV8X15-1/2
Replacement clear grinding shield for "Forney" 58600 (sku # 891.0275) and 58605 grinding shield assemblies. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. Sleek and compact; weighs less than one ounce; offers serious all-day comfort with a stylish look and extreme durability; independently certified; provides 99.9% UV protection; meets ANSI Z87.1+ safety standards. 15-1/2" (393.7mm) x 8" (203.2mm) replacement green grinding shield for Forney 58604 and 58606 grinding shield assemblies. Meets ANSI Z87.1 Safety Standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
Black & Decker AS6NG Cordless Screwdriver GOGGLES OXY/ACET NUM 5SHD 50MM GLASSES SAFETY CLR/BLK FLEX
Spindle lock for manual use if desired and for greater control when starting and finishing screws. Forward/reverse slide switch for easy screwdriving and screw removal. Rubber grips provide comfort and control. Narrow nose piece for extended reach in tight places. Specs: 130 RPM, 20 in/lbs of torque Features two separate 50mm round #5 shaded hardened eye-pieces. Equipped with cover lenses. Folds up to pocket size for storage and carrying. Meets ANSI Z87.1 safety standards. "Forney" 56900 (shaded) and 56901 (clear) replacement 50mm eye-pieces are available separately. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. Includes patented flex temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. The clear lens is best used indoors or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
GLASSES SAFETY CLR/PINK FLEX  GLASSES SAFETY CLR/BLK FLEX   GLASSES SAFETY BLUEMIRROR/BLUE
Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Include patented temple technology designed to relieve pressure on the ear while providing excellent stability and comfort. Additional features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. These clear lenses are best used for indoor/outdoor use or at night. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Features include an integrated brow guard that provides protection from falling debris and a one-piece wrap around lens that provides additional side impact protection. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
GLASSES SAFETY CLR/GRAY FRAME WLDG GOGGLES CYCLOPS UNIV     GLASSES SAFETY GRAY/BLK FRAME
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards.
GLASSES SAFETY BLUE MIRROR/BLK GLASSES SAFETY CLR/CAMO FRAME GLASSES SAFETY AMBER/CAMO FRM
Wing design temples that alleviate pressure across the temple and pinching on the ear. Floating lens design helps to prevent fogging and the rubber nose piece provides additional comfort. Meets ANSI Z87+, CSA Z94.3, and MIL-PRF-31013 ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards.
GLASSES SAFETY BRNZ/CAMO FRAME GLASSES/GOGGLE SAFETY CLEAR   CLC 1119 Bucket Tool Organizer
Anti-fog coating, contour design temple tips that softly hug the head and alleviate pinching, as well as an adjustable length eyewear retainer. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Clear lens and anti-fog coating. Includes temple and head straps which allow an individual to swap between safety glasses and goggles. Soft foam lining around the frame which block out debris. Meets ANSI Z87+, CSA Z94.3, and MILSPEC standards for impact and ballistic standards. Organize a wide range of tools and accessories, 14 double row pockets inside, 34 triple row outside. Security pocket with hook, loop closure. Drill pocket.
GOGGLES WELDING FLIP 2X4-1/4IN BAG PARACHUTE 19POCKT 10X6.5IN SHIELD FACE CLEAR LIGHTWEIGHT
Featuring 2" (50.8mm) x 4-1/4" (107.95mm) #5 shade hardened lens with clear glass cover lens. Meets ANSI Z87.1 safety standards. Conforms comfortably to the head and allows ample room to fit over regular eye glasses. Provides 99.9% UV protection. DESIGNED FOR GAS WELDING ONLY. 12 oz. Duckwear canvas dividers for easy compression of pockets; reinforced poly ripstop pockets and bottom; 19 pockets: 13 exterior, 6 interior; you can stack 3-4 of the parachute bags into a 5 gallon bucket; rip cord closure. Size: 10" D, 6.5" H. Complete assembly with pin-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) clear grinding shield. Lightweight design for maximum comfort. Tough non-warping red polyethylene visor. Meets ANSI Z87.1 safety standards. NOT TO BE USED FOR OXY-ACETYLENE WELDING. "Forney" 58602 (sku # 891.0283) is replacement clear shield.
ORGANIZER BUCKET TOOL         Black & Decker LI2000 Cordless Screwdriver FACE SHIELD CLEAR GRINDING
ORGANIZER BUCKET TOOL
Our Price: $19.70
Made of 600 poly ripstop fabric. Fits most 5 gallon buckets. 3 interior loops for hammers, drills, pry bars and other long tools. Inside is left open for remaining tools. An inline grip and compact design makes this 4 volt Max cordless rechargeable screwdriver ideal for tackling a variety of household tasks. Comfortable to use and fits in tight spaces. 180 rpms and 35 in-lbs of torque provide plenty of power for a variety of applications. Complete assembly with ratcheting-type headgear and 15-1/2" (393.7mm) x 8" (203.2mm) grinding shield. Lightweight design for maximum comfort. Tough non-warping polyethylene visor. Meets ANSI Z87.1 Safety Standards. Forney 58608 is replacement ratcheting-type headgear. Forney 58602 is replacement clear shield. NOT TO BE USED FOR OXY-ACETYLENE WELDING.
SCREWDRIVER 3.6V LITHIUM W/LED CLC 4122 Bucket Tool Organizer SCREWDRIVER 7.2V LITHIUM-ION
3.6 volt Lithium screwdriver, 180 rpm provides good speed with 35.6 in. lbs of torque. Built-in LED light for visibility inside cabinets, closets or outside after dark. Compact size and very light weight at 1.06 lbs. Includes USB charger and screwdriver bit. Made of durable rugged, polyester fabric. 36 triple row outside pockets, 25 double row inside pockets. Drill holder with side release buckle security strap. Designed to fit most standard 3-1/2 to 5 gallon buckets. Lithium-Ion battery for more power and run time. Holds a charge up to 18 months. 1/4" Hex quick-change chuck. Two speeds (200/400 rpm) for versatility. 16 torque/clutch settings. Built-in LED work light. Battery charge level indicator. Torque: 46 in-lbs. Battery capacity: 1300 mAh. Recharging time: 3-5 hours. Adaptor: UL listed. Includes: charger, (4) quick-change hex-shank drill bits and (4) screwdriver bits.
SCREWDRIVER 4V STORAGE W/8BITS SmartSelect LI4000 Cordless Screwdriver Rockwell WX252L  Cordless Screwdrivers
On-board eight-bit storage plus long lasting Lithium power keeps it all ready at your fingertips making screw driving tasks quicker and easier. From assembling furniture and toys to hanging photos on your walls, on-board bit storage plus cordless convenience helps you finish in a flash. This 4 volt Max rechargeable cordless screwdriver is powerful and convenient. Compatible with most micro USB chargers. Features magnetic bit storage and an LED light to illuminate work surfaces. 180 rpm motor; 40 in-lbs torque. Pistol grip for access into tight areas. Extended reach screwdriver allows for reaching in tight spots. 4 volt lithium 1.5 Ahr battery. 36 in lbs of torque. LED light. Forward and reverse switch. Includes 6 bit tips and a 5 hour charger. Weighs only 1.1 lbs.
Pack-N-Roll 85-010 Portable Tool Carrier CART 150LB W/STEEL TOE PLATE  CART MESH WHEELED PACK-N-ROLL
Lightweight, durable, rust proof, plastic construction; telescopic aluminum handle; convenient and compact; folds down flat for storage; 80 lb loading capacity. 150 pound capacity hand truck folds down to 2" thick for easy storage; sturdy steel frame with an extra load support plate; integrated single hand lock and release handle with strong composite supports for a wobble free performance; bungee cord included, hand truck is equipped bungee knobs and pre-drilled bungee support holes. Dimensions: 40" H x 15.25" W, 5" wheels. Great for laundry, groceries, sport, school and much more; folds flat to 3" thick; push button telescopic handle; 4 wheel operation; stores any where; smooth rolling; 55 lb capacity; handle extends to 39.5".
Lenox 1787473 Bucket Tool Organizer SCREWDRIVER 4VLITH W/SCREWHOLD Olympia 85-601 Telescoping Hand Truck
22 exterior pockets, 12 interior pockets, hammer loop, tape holder loop, padded shoulder strap, side clips secure the organizer and reflective material. Screw holder attachment holds screws firmly in place for one-handed operation and easy access to hard to reach spaces. Rapid reloadable cartridge allows you to store 6 bits in the tool; eliminating lost bits and time spent looking for them. Advance the correct bit with a simple slide action; no more fumbling around with small bits. Front mounted LED light means no more working in the dark. Powerful 4 volt MaxLithium battery holds a charge for up to 18 months. Side-mounted switch allows you to operate in reverse and the rubber handle provides a comfortable grip. No load speed of 230/min. Charging time only 5 hours. 1/4" hex chuck size. Weighs only 1.1 lbs. Includes Worx Screwdriver with screw holder, 1 reloadable cartridge with 6 bits (PH1, PH2, SL4, SL6, SQ1 and SQ2) and a 4 volt MaxLithium charger. Push button telescopic and lightweight aluminum design; smooth rolling 2 wheel design; stores anywhere - even cramped spaces for the ultimate storage convenience; ergonomic grip and fold away handle; 155 lb load capacity.
TABLE WORK PORTABLE CAP 300LB Workmate WM225 Work Bench With Clamp HXP DB3DL2 Adjustable Inline Dual Speed Cordless Screwdriver Kit
Lightweight yet sturdy, the collapsible tabletop design offers maximum versatility and portability. Folds in half for easy storage and out-of-the-way storage. Metal leg stand won't slip on hard surfaces or sink in soft ground. Sets up in seconds and securely supports up to 300 lbs. Perfect for any project or event, indoors or out. Advanced One-Handed Clamp system with exclusive clutch design for easy clamping. Advanced clutch design allows for fine-tuning. Folds for easy storage. Steel construction holds up to 450 pounds. Dual height for use as a workbench, bench tool stand, vise or sawhorse. Standard Equipment - Four Swivel Pegs. Specialized One-Handed Clamp handle. Rubber feet. SPECIFICATIONS: Bench Height 30-1/8". Parallel Clamping 0 - 9-1/4", Parallel Peg Clamping 0 - 16", Diagonal Peg Clamping 0 - 24". Work Surface 9-11/16" x 24". Reversing trigger switch, compact and lightweight fits easily into tight spaces, 21-Stage clutch, integrated LED lights work areas, Bit Lock  for fast and easy bit changes, adjustable 2-position handle, non-slip elastomer grip. Specs: 44 in/lbs torque, no load speed 200/600 RPM, 1/4" hex chuck,1.5Ah Lithium Ion batteries, 30 min. charging time, weighs 0.9lbs. Includes: 3.6V HXP 1.5Ah Lithium Ion batteries, charger, and case.
Milwaukee 2401-22 Compact Cordless Screwdriver Kit Workmate WM425 Work Bench CART SERVICE COLLAPSES TO 8IN
Features variable speed trigger for output power control, quick bit-loading, battery fuel gauge displays remaining run-time, metal gear housing, built in led for illumination of dark work spots and over mold side and grip. Specs: 0-500 rpm no load speed, 175 in-lbs. torque, spindle lock, 14+1 clutch settings, capacity in: steel 1/4", wood 1/2" and weighs 2.0 lbs. Includes: (2) 12V Red Lithium battery packs, 12V charger, and compact driver storage bag. Advanced One-Handed Clamp system with exclusive clutch design for easy clamping. Front jaw swings up for vertical clamping. Folds for easy storage. Steel construction holds up to 550 pounds. Dual height for use as a workbench. Standard Equipment - Four Swivel Pegs. Specialized One-Handed clamp handle. Rubber feet. SPECIFICATIONS: Bench Height 31-1/8". Parallel Clamping 0 - 8-5/16", Parallel Peg Clamping 0 - 18-3/4", Diagonal Peg Clamping 0 - 29-3/8". Work Surface 20-3/4" x 29-1/8". Collapses to 8" wide for easy storage; securely locks open and closed; 3 levels for holding items; handles feature dual comfort material and 3" swivel wheels with a sleek modern design; constructed of durable, lightweight aluminum with 3" rubber swivel wheels; max load 50 lbs per level; open dimensions: 34" x 15" x 26-1/8"; closed dimensions: 42" x 15" x 8". Do not stand on or ride on; keep hands clear when folding shut; follow maximum weight instructions and do not overload.
Max DCF610S2 Single Speed Standard Cordless Screwdriver Kit Black and Decker DCF680N1 Cordless Screwdriver Kit Bosch PS21-2A Compact Cordless Pocket Driver
Compact, lightweight tool at only 2.2 lbs is designed to fit into tight areas. One-handed loading 1/4" hex chuck accepts 1" bit tips. 3 LEDs provide light and increased visibility without shadows. 15.0 clutch settings. 160 UWO max power. No load speed: 0-1,050 rpm. The kit includes: (1) 1/4" Screwdriver, (2) 12V Max Lithium Ion battery packs, (1) fast charger, (1) belt hook and (1) contractor bag for convenient storage. Motion activation variable speed and reversing control for precise fastening control. Variable speed 0-430 rpm for fastening into wood, plastic and light gauge metal. Adjustable two-position handle allows for operation in either in-line or pistol grip. Allows control when completing light fastening applications. Allows illumination in confined areas without shadowing. Battery state of charge on tools allows end users to know when to charge packs. Allows for quick screwdriver bit change and holds 1" bit tips. 8 volt max battery pack allows for longer run time and charges in one hour. Tool weighs only 1.1 lbs. Includes: 1 charger, (1) 8 volt max compact battery and kit bag. Features a bright LED light. Includes 30 minute charger, (2) lithium-ion 12V max batteries and carrying case. Specs: 5.6" length, 0-350/0-1,300, 12V max rating, 265 in lbs torque and weighs 1.8 lbs.
TABLE WORK/SAWHORSE 31X25IN   Milwaukee 2101-21 Cordless Screwdriver Kit CART BASIC UTILITY
CART BASIC UTILITY
Our Price: $143.20
Instant set up; portable all-in-one work table, clamping system and sawhorse; integrated clamping system holds materials straight, angled, combined, up, down and around; it holds materials so your hands are free to work; compact design for effortless transport and storage; built with organization and layout tools that make you more productive. Features 21 position clutch setting with auto shut-off and 44" pounds of torque. 2-speed gearbox 200/600 rpm. 45 minute charge time. 1/4" hex drive size. Kit includes: (1) M4 1/4" hex screwdriver, (1) M4 2.0 battery and (1) M4 charger. Designed for your on-the-go storage needs. Built with 16 and 18 steel gauge. Features ergonomic, formed steel handle to make it easy to move around sites; rugged and durable cart that holds up to 500 lbs. of evenly distributed weight on the two, 3 in. deep trays. Size: 38 in. H x 32 in. W x 15.20 in. D.
Jawhorse RK9003 Foldable Work Station With Improved Latches PROJECT CENTER BENCH MOBILE   CART FOLDING 150LB. CAPACITY
Clamping portable workstation; 37" clamping capacity with 2,200 lbs. of clamping force; foot operated clamping allows for both hands to control and position the work piece; 600 lbs. load capacity; all steel construction; tripod base for all-terrain stability; front roller for easy transport; folds quickly for compact transport and storage; stirrup feet allow for added stability. Make any place your workspace. Work on projects wherever, whenever and however you need to. Tables provide large 27-3/4" x 31-1/2" (70 x 80cm) work surface and 360? access. Locking table supports with easy-release tabs. Hole pattern on tables accept Kreg Bench Dogs and other accessories. Included Kreg Bench Clamp with "Automaxx" (sku # 888.2052) clamps vertically and horizontally. Built-in storage trays hold hardware and other parts. Heavy-gauge steel legs provide a solid foundation. Folds down in seconds for work on the go and easy storage. Expandable by pairing with a second Mobile Project Center. Perfect for use with Kreg Joinery. Folding, all-purpose hand truck. Light-weight, smooth rolling grip.
SCREWGUN DRYWALL 20V MAX XR   DRYWALL SCREW GUN KIT COMPACT Duraspin 7W0001N Auto-Feed Cordless Screwdriver
Up to 4,400 rpm provides greater speed. Brushless motor delivers maximum run time. Balanced and ergonomic. Nosecone locks on securely and is easily removed while maintaining consistent screw depth. 1/4" hex drive; 8.75" tool length. Weighs only 3.3 lbs. Kit includes: (1) Max XR Li-Ion brushless drywall screw gun, (1) Multi-voltage charger, (2) 20 volt Max XR compact Li-Ion batteries (2.0 Ah) and a handy bag to carry it all. The M18 FUEL Drywall Screw Gun is faster than corded models and features AUTO START functionality and delivers up to 3X longer run time than other cordless competitors. The POWERSTATE Brushless motor spins at 4,500 RPM resulting in faster productivity. AUTO START feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. Includes: M18 Drywall Screw Gun, M18 Red Lithium battery pack, contractor bag, M18 & M12 multi-voltage charger, PR2 bit, and belt clip. Li-Ion auto feed screwdriver. 5000 rpm high speed motor. Corner-fit feed system. Tool-free screw length adjustment. Precise depth of drive adjustment with depth lock. Quick slide button bit change. Variable speed trigger with lock and reverse. Belt hook right or left handed adjustable. Drives #6 - #8, Screw lengths: 1" - 2". Includes (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag and (2) drive bits.
DuraSpin 2P0001N Cordless Collated Screwdriver CART UTILITY SLIDING TOP
CART UTILITY SLIDING TOP
Our Price: $303.07
High torque motor for heavy-duty applications, jobsite portability, fully integrated (no attachments) design for better balance, smoother operation, and less user fatigue, no more stripped out heads and improved bit life, adjustable depth-of-drive. Specs: 2500RPM, weighs 6.0lbs. Includes: (2) 18 volt Li-Ion batteries, (1) charger, (1) drywall nosepiece, (1) wood nosepiece, (1) storage bag, (1) square bit and (1) Phillips bit. Provides a range of storage options, including a lockable sliding top, 2 drawers and a 3 in. bottom tray to manage all your daily task. Equipped with power and USB. Size: 41 in. H x 32 in. W x 16.20 in. D. Weight capacity: 500 lbs.
   
 
1