Home > HAND TOOLS > SAFETY & ORGANIZATION > TOOL APRONS/BELTS/POUCHES > TOOL SUSPENDERS
Sort By:
1
CLC Tool Works C6 Economy Standard Work Apron CLC 439 Steel Loop Hammer Holder CLC Tool Works C12 Waist Apron
Two large pockets for nails, screws and tools. Canvas waist ties, double stitched for  extra strength. One size fits all. Heavy-duty leather with cradle design eliminates hammer pivoting. Fits belts up to 2-3/4" wide. Heavy-duty cotton canvas. Pockets for tools, pencils and parts. Machine washable, 2 polypropylene hammer loops. One size fits most.
Mag-Torch MT 300 WB Flux Coated Bronze Brazing Welding Rod 12 in L Mag-Torch MT 300 NS Flux Coated Brazing Rod 12 in L Mag-Torch MT 300 PC Soldering Rod 12 in L
General uses: repairs, steels, cast iron, copper base metals, galvanized and malleable irons. General uses: join carbon and alloy steels; join most different metals; stainless steel; cast iron; nickel; brass. General uses: joins copper to copper; refrigeration; electrical; plumbing.
CLC 417 Plier/Tool Holder ROD WELDING 1LB 1/8IN MILD STL ROD WELDING AC/DC 3/32INCH 1LB
Molded, open-bottom design holds variety of tools. Fits belts up to 2-3/4" wide. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
CLC 739 Steel Swinging Hammer Holder ROD STEEL 10CT 3/32X18IN      CLC 768 Plier Holder
Heavy-duty leather with cradle design keeps hammer secure, swing feature keeps hammer vertical. Fits belts up to 2-3/4" wide. General purpose, high quality rod for repair of low carbon steels. 6 rods. Copper coated rod has .06% max carbon and .17% max manganese. For projects around the house or commercial use. Red color coded. Tensile Strength: 45,000 PSI Melting Point: 2,700 degrees F (1,482 degrees C). 6 Rods. Fits narrow-type hand tools up to 10" long. Molded leather retains shape, safety snap.
ROD WELDING 1LB 3/32IN MILDSTL ROD WELDING LOW H 3/32IN 1LB  ROD WELDING LOW H 1/8INCH 1LB
E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ROD WELDING AC/DC 1/8 INCH 1LB ROD/ELECTRD WELDING 3/32IN 1LB ROD/ELECTRD WELDING 1/8IN 1LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
CLC 839 Snap-In Hammer Holder FLUX BRAZING BORAX TYPE 1/2LB HOLDER PLIER TOP GRAIN LEATHER
Cradle design keeps hammer secure, swing feature keeps hammer vertical. Heavy-duty leather. Fits belts up to 2-3/4" wide. Excellent cleaning flux for use with all flame torches. Comes in easy to use, re-sealable tube. The deluxe quality tool holder for pliers, snips or pruning shears is made of heavy-duty leather with heavy-duty stitching and easily holds tools up to 10" long; fits narrow-type hand tools; molded leather retains shape; fit belts up to 2-1/4" wide.
ROD STEEL 10CT 1/8X18IN       CLC 464 Tape Rule Holder SHEATH UTILITY KNIFE
ROD STEEL 10CT 1/8X18IN
Our Price: $7.36
SHEATH UTILITY KNIFE
Our Price: $8.18
General purpose, high quality rod for repair of low carbon steels. 6 rods. Copper coated rod has .06% max carbon and .17% max manganese. For projects around the house or commercial use. Red color coded. Tensile Strength: 45,000 PSI Melting Point: 2,700 degrees F (1,482 degrees C). 6 Rods. Molded heavy-duty leather retains shape and holds a 16' -  30' tape. Fits belts up to 2-3/4" wide, safety snap included. Made of Poly Rip Stop/600D poly material and has a reinforced plastic backing. Perfect for holding utility knives, small flashlights or markers. Elastic channel holds screwdriver. Spring steel clip to attach to belt. Pouch measures 8.75 in x 3.25 in.
LANYARD SYSTEM INTGRD W/CLIP  DeWalt DG5139 Hammer Holder CLC Tool Works 110RED Work Suspender
Patented integrated fastening system designed exclusively for use with specially-equipped IRWIN "VISE-GRIP" pliers; work safer by attaching clip to pliers handle to help prevent accidental drops when working in elevated conditions; lanyard allows the user to find the right tool faster when stored in a crowded toolbox. Ballistic poly material provides strength and durability while steel loop cradle helps stabilize hammer and added padding helps keeps handle away from body. Fits belts to 2-3/4" wide. Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps.
CLC Tool Works 110BLU Work Suspender CLC Tool Works BS60 Bib Loop Neck Shop Apron ROD WELD GEN PURP 1LB 5/64IN
Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps. Two bib pad and pencil pockets, 1 waist pocket, overall length 36". Machine washable . One size fits most. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
CLC Tool Works 110BLK Work Suspender Custom Leathercraft 5024  Cordless Drill Hooks HOLDER TAPE HVY DUTY POLY BLK
Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps. Conveniently holds most cordless drills; ball-capped hook safely holds your drill; hook storable in a closed position when not in use; features 2 bit pockets and an elastic sleeve to help organize bit and accessories; fits belts to 2-3/4" wide. Heavy-duty poly fabric construction provides strength and durability. Slotted keel design allows for easy tape removal and "quick measure" capability. Securing strap with hook and loop backing helps keep strap out of the way when not in use. Fits belts to 2-3/4 inch wide.
ROD BRASS FINSH 10CT 3/32X18IN CLC Tool Works 110USA Elastic Work Suspender CLC Tool Works 110RUL Elastic Tape Rule Work Suspender
Balanced zinc and copper alloy. Features excellent ductility and is smooth flowing. Excellent for brazing sheet metal, pipes, fenders, water tanks and many cast iron applications. Requires flux. Yellow color coded. Tensile Strength: 63,000 PSI Melting Point: 1,620 degrees F (882degrees C). 6 rods. Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps. Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps.
ELECTRODE STEEL 1LB 1/16IN    APRON SUPRWAST 13PCKT 23X9.5IN TOOL BAG JR CTRCTR 21PKT 12IN
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. 18 oz. Duckwear canvas; quick release belt fits up to 52" waists; 13 pockets to hold tools and pens; bar tacked seams. Size: 23" W x 9.5" H; 27" to 54" waist size. Tough ballistic nylon with wide mouth for easy access, padded sides and bottom. 6 outside pockets and 15 inside pockets; zipper closure. 8" wide x 13" long x 8-1/2" tall. Tools not included.
TOOL BAG CAMO 10 POCKET 12X7  ROD BRAZING BRZ FLUX 3/32X18IN DeWalt DG5173 Tool Holder
4 pockets on front, 3 pockets on back and 3 inner pockets. Size: 12" x 7". Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux coated for best cleaning action. Yellow color coded. Tensile Strength: 65,000 PSI. Melting Point: 1,598? F (870? C). Heavy-duty poly fabric contruction provides strength and durability with steel measuring tape clip and webbing loop. Fits belts to 2-3/4-inch wide, tool holder has multiple pockets designed for pliers, snips, cutters, pencils or markers.
ROD AC LOW HYDROGEN 5/32IN 5LB CLC 1027 Carabineer Lanyard CLC 1030 Lanyard
Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190 High visibility 3/4" webbing with internal shock cord; heavy-duty, extra length lanyard; 2 carabiners for secure belt and tool attachment; convenient webbing loop for belt attachment; rated for tools up to 6 lbs. High visibility 3/4" webbing with internal shock cord; 10" webbing loop with dual channel lock for secure tool attachment; cinch or carabiner belt attachment; convenient webbing loop for belt attachment; rated for tools up to 6 lbs.
DeWalt DG5121 Impact Driver Holster ROD WELD MILD STL 5/32IN 5LBS ROD WELDING 5LB 1/8IN MILD STL
Adjustable Strap and Quick-Release Buckle holds drill securely in place; heavy-duty poly material provides strength and durability; hook & loop back keeps strap back when not in use; angled holster provides better drill balance; added pockets and elastic loops hold bits, chuck key, drivers, etc; fits belts to 2-3/4" wide. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ROD/ELECTRD WELDING 1/8IN 5LB HOLSTER TOOL W/BELT 5PKT      CLC IPK489X Nail/Tool Bag
HOLSTER TOOL W/BELT 5PKT
Our Price: $15.95
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Made of Poly Ripstop/600D poly material. This holster has 5 pockets to hold small hand tools. The adjustable belt can fit up to a 52 in. waist and has a quick release buckle and a tape clip built into it. There is also a heavy web hammer loop. Two main nail/tool pockets, smaller pockets fits pliers, nail sets and pencils. 2" polyweb belt with quick release buckle.
CLC Tool Works 1245 Single Side Tool Apron ROD WELD 7018 MILD 5/32IN 5LB ROD/ELECTRD WELDING 5LB 3/32IN
Made of polyester fabric and ballistic nylon binding. 2 main nail and tool pockets,  3 small pockets for pliers, pencils, etc. 2" wide web belt. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160.
CLC 5023 Cordless Drill Holster WRENCH ROLL HD 11-POCKET      ROD WELDING AC/DC 1/8 INCH 5LB
WRENCH ROLL HD 11-POCKET
Our Price: $16.61
Made of polyester fabric. Holds most brands of T-handle drills. Multiple outer pockets and sleeves for complete bit organization. Safety strap with quick release buckle. Made of heavy-duty Duckwear canvas to absorb tool oil. 11 assorted pockets. Fits 6 mm to 32 mm wrench sets. Opened: 18 in. W x 17.5 in. H. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ELECTRODE CAST IRON 1LB 1/8IN ROD/ELECTRD WELDING 5/32IN 5LB ROD WELDING MILDSTL 5LB 3/32IN
Nomacast hard cast iron features a non-conductive coating; great for welding dirty, heat affected and oxidized cast iron; ideally suited to cladding contaminated casting prior to joining with high nickel alloys; non-machinable; RC 39 hardness. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50.
ELCTRD F/AC WLDR 5LB          ELCTRODE 3/32IN 5LB F/SM WLDRS ROD BRASS FINISH 10CT 1/8X18IN
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. Balanced zinc and copper alloy. Features excellent ductility and is smooth flowing. Excellent for brazing sheet metal, pipes, fenders, water tanks and many cast iron applications. Requires flux. Yellow color coded. Tensile Strength: 63,000 PSI Melting Point: 1,620 degrees F (882degrees C). 6 rods.
ROD WELDING LOW H 1/8INCH 5LB CLC Tool Works 1370 Deluxe Tool Apron BigMouth Tool Works 1161 Standard Traditional Tool Bag
E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz). Made of polyester fabric and ballistic nylon binging. 4 main nail and tool pockets, 3 small pockets and 1 center pocket holds a tape or other tools.  2" wide web belt with steel buckle. 12" standard Big Mouth? opens wide for easy access to bags contents. 8 multi-use pockets inside and 6 outside organize tools and accessories. Padded reinforced web carrying handles. 12"L x 8-1/2"W x 8"H.
ROD BRZ FNSH LFM 10CT 1/8X18IN BAG TOOL SGL WALL 6-POCKET    CLC Tool Works I370X3 Work Apron
Formulated for high tensile strength and ductility. Smooth flowing. Excellent for most brazing uses. Flux coated for best cleaning action. Yellow color coded. Tensile Strength: 65,000 PSI. Melting Point: 1,598? F (870? C). Made of single wall 600 poly ripstop fabric. Super-wide "Dr.'s Bag" opening. Belt is heavy duty suede leather with quick release buckle and steel hammer loop on a 2" polyweb belt. 5 main nail/tool pockets, 3 smaller pockets fit pliers, nail sets and pencils.
CLC 1025 Interchangeable End Lanyard APRON SUPRBIB 16PCKT 23X23.5IN TOOL BAG CONTRACTOR 22PKT 17IN
Comes with 3 interchangeable tool ends for quick tool changes; high visibility 3/4" webbing with internal shock cord; 10" webbing loop with dual-channel lock for secure tool attachment; cinch or carabiner belt attachment; convenient webbing loop for belt attachment; rated for tools up to 6 lbs. 18 oz. Duckwear canvas; full coverage apron for home or shop; quick release belt that fits up to 52" waists; 16 pockets: 13 on waist, 3 on bib; padded shoulder straps, dual hammer loops. Size: 23" W x 23.5" H. Professional contractor bag with 10 outer pockets, 12 inner pockets.  Durable water resistant fabric with hard bottom. Cushioned web handles and shoulder strap. Stable gatemouth design with heavy duty zipper and wire reinforced rim. Excellent storage for a variety of tools. Dimensions: 17" L x 9-1/2" W x 12" H. Tools not included.
APRON SHOP 2-POCKET           DeWalt DG5120 Cordless Drill Holster TOOL ROLL 25-POCKET
APRON SHOP 2-POCKET
Our Price: $20.76
TOOL ROLL 25-POCKET
Our Price: $21.49
Made of heavy-duty Duckwear canvas. Padded adjustable shoulder straps. Full coverage apron for home or shop. Quick release belt fits waists up to 52 in. Heavy-duty poly material provides strength and durability with adjustable strap and quick release buckle holds drill securely in place. Hook and loop backing keeps strap back when not in use, angled holster provides better drill balance, added pockets and elastic loops hold bits, chuck key, drivers. Pouch will fit belts to 2-3/4 inches wide. Heavy-duty Duckwear canvas to absorb tool oil. 25 pockets; 17 loops. Carry handle. Quick release buckle to secure when rolled. Size when rolled: 4 in. D x 14.5 in L. Size when opened: 26 in. W x 14.5 in. H.
ROD WELDING DC ALUM 1/8IN .5LB CLC Tool Works 1429 Deluxe Tool Apron BAG TOOL 16-POCKET
BAG TOOL 16-POCKET
Our Price: $25.03
E4043 DC aluminum "AluminArc" specialty welding electrodes are the highest strength alloy for arc and torch welding of low alloy aluminum. Excellent for cast, wrought and extruded aluminum in all positions. Can also be used as a torch brazing alloy. Typical applications include truck beds, loading ramps and docks, banisters, stairs, diamond plate, irrigation piping, engine blocks, transmission housings and railroad frogs. Recommended Polarity: DC Reverse. Weight Lbs. (Kg): .5 (.22). Amperage: 70-120. Made of polyester fabric and ballistic nylon binging. 4 main nail and tool pockets, 6 small pockets and center pocket holds tape or other tools. 2" wide web belt with steel buckle. Poly ripstop/600D poly material. Super-wide in. Dr's bag opening. 16 pockets: 6 exterior, 10 interior. Padded ripstop bottom. Side pull handles.
ROD/ELCTRD WELDING 5/32IN 10LB LANYARD STRUCTURE 58IN - 78IN ROD WELD MILD STL 5/32IN 10LBS
E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. Our premium quality structure lanyard is made of 1 inch webbing with internal shock cords. Includes two heavy-duty locking carabiners and is rated for tools up to 15 pounds. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
WELDING ROD 1/8IN 7014 10LB   ROD WELDING MILDSTL 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB
"High Deposition" is an iron powder-type electrode with medium to shallow penetration. It is known for smooth arc characteristics, good arc stability and low spatter. Excellent for sheet metal and ornmental iron work on poorly fitted joints. Use anywhere ease of operation and good appearance are required. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000; Amperage: 110-140. E6013 an all-position, general purpose rod with medium to shallow penetration; medium to heavy slag is easily removed; excellent for poorly fitted joints; smaller sizes of rod are well suited to low heat on thin metals; use on all types of mild steel where ease of operation and good appearance is required; great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000. Amperage: 50-70 on sku # (890.9806) the Amperage is 30-50. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
ELCTRODE F/SM WLDRS 10LB 1/8IN RD WLDG 1/8IN MILD STL 10LB   ROD WELD 7018 MILD 5/32IN 10LB
E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190. E6011 an all-position rod with strong arc force for deep penetration; fast metal solidification facilitates welding in vertical and overhead positions; light slag allows for easy clean-up; excellent for rusty steel because of the strong arc force; useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 88,000. Amperage: 25-75 on sku #s (890.9665, 890.9673, 890.9681) Amperage: 35-125 on sku #s (890.9707, 890.9715, 890.9723) Amperage: 50-160. E7018 mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on harden steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Reverse). Tensile Strength (PSI): 84,000. Amperage: 100-140 on sku #s (890.9624, 890.9632) Amperage: 140-190.
ELECTRODE STNLSS STL 1LB 1/8IN CLC Tool Works I427X Tool Apron ROD WELDING LOW H 5/32IN 10LB
Stainless steel Easy-All 312-16. Weld construction and pre-hardened tool steels and specialized iron-base castings w/high-carbon content. Mineral coated high-alloy steel that can be used by anyone - regardless of experience. Four main nail/tool pockets, 6 smaller pockets fits pliers, nail sets and pencils. Leather holder fits up to 30' measuring tape, steel hammer loops. Leather combination square holder. 2" polyweb belt. E7018 AC mild steel welding rod easily produce quality results on smaller amperage AC/DC welders; suitable for all positions on hardened steels where no preheat is used and on cold rolled steels normally exhibiting excessive porosity when welded with conventional rod; the low hydrogen content reduces cracking and peeling of the weld material; features excellent restart capability; designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel; for frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Tensile Strength (PSI): 84,000. Amperage: 65-100 on the 10 LB rods 140-190. Individual electrode (rod) weighs .50 lbs (.75 oz).
TOTE HARD GATEMTH 23PCKT POLY CLC Tool Works PK1836 Framers Nail/Tool Bag BigMouth Tool Works 1165 Traditional Large Tool Bag
Poly ripstop / 600d poly material; 5 pockets: 4 exterior (1 with zipper), 12 tool loops interior; steel handle w/foam rubber grip. Size: 12" W x 10" D x 11" H. Framer's nail  and tool bag made of polyester fabric and ballistic nylon binding. 4 pockets for nails, tools, etc., 2" polyweb belt with quick release buckle, speed square holder, metal clip holds all measuring tape sizes, steel hammer loop. 16" large Big Mouth? opens wide for easy access to bags contents. 12 multi-use pockets inside and 10 outside organize tools and accessories. Padded reinforced web carrying handles, adjustable shoulder straps.  16"L x 8-1/2"W x 10"H.
ROD WELDING STEEL 1/8INCH 10LB SUSPENDERS TOOL               DeWalt Tradesman Tool Bag
SUSPENDERS TOOL
Our Price: $31.47
E6010 an all-purpose electrode used in all positions; a deep penetrating rod for carbon and galvanized steel; E6010 is for use with a DC welder and runs on DCEP; ideal for welding through light to medium amounts of dirt, rust or paint. Recommended Polarity: DCEP (Reverse Polarity). Tensile Strength (PSI): 80,000. Amperage: 35-125. LoadBear? stretch suspension for comfort. Cell phone pocket fits up to an iPhone? 6. Breathable foam construction to stay cool. Clips to any D ring on most belts. Custom Leathercraft Tool Bag, Heavy Duty, Series: Tradesman, 16 in Length, Hook and Loop Closure, Poly Fabric, Black, 33 Pockets, Padded Web Handle
CLC Tool Works 1529 Contractor Grade Tool Bag RIG SUSPENSION 11-POCKET      BAG TOOL 16-POCKET
RIG SUSPENSION 11-POCKET
Our Price: $37.85
BAG TOOL 16-POCKET
Our Price: $38.18
9 pockets outside and 8 inside to organize a wide range of tools and accessories. Main pocket with web loops to  accommodate large handle tools. 13-1/2" x 9" Multi-compartment plastic tray included, stores into middle compartment for easy access to the rest of bag contents.  Padded carrying handles and adjustable shoulder strap. Metal tool snap and electrical tape strap. 16"L x 9"W x 9"H. Made of Poly rig Stop/600D Poly material. 2 large capacity pouches for holding medium and small hand tools. Has 11 pockets for holding tools, nails and other small parts. There is a small pouch that can hold a tape measure or use it to hold nails and other small parts. Heavy web hammer loop and steel buckle belt with monster grommets. Fits waists up to 52 in. Size: 21 in. W x 4.5 in. D x 10 in. H. Double wall 600 poly ripstop fabric. Super-wide "Dr.'s Bag" opening. Removable padded shoulder strap.
CLC Tool Works 1534 Tool Bag RIG SUSPENSION 12-POCKET      WIRE WELD MILD MIG .024IN 10LB
RIG SUSPENSION 12-POCKET
Our Price: $45.04
10 Pockets inside and 13 pockets outside to organize tools and accessories. 10" x 3" Multi-compartment plastic tray to organize small parts, recessed on top for easy access. Reinforced web carrying handles and adjustable shoulder strap. Overall dimensions: 16"L x 8"W x 11"H. 20% Poly; 10% Ferric; 15% PP; 45% PVC and 10% EPE Foam. Poly rip stop/600d poly material. Large capacity pouches are adjustable. Steel buckle belt with monster grommets fits waists up to 51 in. Heavy web hammer loop. Ideal for auto body repair and fabrication on most ferrous metals. Contains a high level of manganese and silicon for a superior weld, even on rusty, dirty steel. Produces a smooth bead which requires less grinding. Not recommended for aluminum engines. Yellow color coding on label. Required Shielding Gas: Argon/CO2. Recommended Polarity: DCEP Reverse Polarity. Tensile Strength (PSI): 70,000.
DeWalt DG5372 Tool Apron Megamouth Tool Works 1163 Superior Quality Tool Bag CLC Tool Works 175274 Deluxe Tool Apron
Apron is made of heavy duty suede leather with a 2" wide web belt that has a double-tongue roller buckle which helps keep belt stable, double-gusset front pocket provides extra capacity and easy access, 5 main pockets, 7 smaller pockets and sleeves, center pocket for tape measure or extra nails, web loop for pry bar, and pouch handle allows for simple belt adjustments and easy one handed carrying. Reinforced interior bottom panel and heavy duty stitching and bar tacking at stress points. 18" 'MegaMouth' opens wide for easy access. 12 multi-use pockets inside and 13 outside organize tools and accessories. Internal metal frame holds bag open, large interior to carry power tools, circular saws and hard hats. Padded handles and adjustable shoulder strap. 18"L x 11"W x 12"H. Reversed heavy duty leather; 4 main nail and tool pockets; 6 smaller pockets fit pliers, nail sets, pencils, etc.; double gussets keep front pockets wide open for easy access; center pocket for tape, nails or other tools; molded leather holder fits combination square; metal swinging hammer loop; 2" poly web belt with roller buckle.
CLC Tool Works 1604 4-Piece Deluxe Tool Apron COOLER INSULATED 8-POCKET     DeWalt DG5640 Tool Apron
COOLER INSULATED 8-POCKET
Our Price: $52.14
Made of polyester fabric and ballistic nylon binging. 6 main nail and tool pockets and 10 small pockets. Padded comfort belt with double adjustment. Specifically designed to be durable enough to withstand tough jobsite conditions. The cooler utilizes double insulation and a food-grade leak proof liner to keep ice cold for 24 hours without leaking. Additionally, Milwaukee constructed the cooler with 1680D ballistic material base and heavy duty metal zippers for a longer life. A tape measure clip with a bottle opener provides ultimate versatility. Lastly, Milwaukee implemented a tech pocket and dry storage compartment to make this cooler a versatile jobsite storage solution. Pouch handle allows for simple belt adjustments and easy 1 hand carrying. Large, gusset style pockets provide extra capacity and easy access, 3" padded, air mesh fabric belt helps reduce heat and moisture accumulation. Built in utility knife pocket helps prevent accidental pouch punctures, 7 main pockets with 9 smaller pockets and sleeves for nails, parts, tools, nail sets and pencils.
CLC 2602 4-Piece Framers Tool Bag CLC Tool Works 1614 5-Piece Comfort Fit Deluxe Tool Apron CLC Tool Works 1578 Open Top Softsided Tool Bag
Double layer of rugged, lightweight ballistic poly fabric; easy carry handle design provides simple adjustments, easy carrying and storage of apron without spilling contents; gussets keep front pockets wide open for greater access; bottoms of main pockets are reinforced for better resistance to abrasion; exclusive metal hook to carry cordless drill, nail gun or other power tools; built-in utility knife pocket helps prevent accidental pouch punctures; 3" wide padded comfort belt with double tongue steel roller buckle. Made of polyester fabric and ballistic nylon binging. Completely adjustable, padded suspenders engineered to hold and distribute weight comfortably. 3" wide padded comfort belt with steel roller buckle. Carry handle design provides for adjustments and storage without spilling contents. Fits waist sizes 29"-46". 21 Multi-use pockets to organize a wide range of tools and accessories. Adjustable, padded shoulder strap with metal hardware. Sturdy metal handle bar with foam grip for easy carrying. Wide open space below handle for easy access to tool carrier's main compartment. 14"L x 11"W x 11"H .
CLC Tech Gear BIGMOUTH Tool Bag With LED Dead On DO-FR Professional Framers Rig Tool Belt TOTE TOOL 13-POCKET
TOTE TOOL 13-POCKET
Our Price: $59.16
Built-in LED light can be easily directed at work area or into tool bag to help identify tools and parts; 3 levels of light output allow adjustment for wide area illumination or close-up work; 11 multi-use pockets inside and 18 outside to help you better organize your tools; padded web carrying handles and adjustable shoulder strap; base pad feet to help reduce wear and abrasion; powered by (2) AAA batteries, included. Integrated back support and work suspenders. 24 total pockets for nail and tool storage. Heavy duty fabric for maximum durability. Moisture-wicking mesh liner; 3 boxed front nail pouches and rafter square pocket. Work Suspenders feature Custom molded,'Dead On' heavy duty logo clip; clips to tool belt or pants; 2" webbing and elastic straps and cell phone holster. 1680 heavy-duty poly fabric. Molded, waterproof bottom. Removable padded shoulder strap. StayPut? handle grips.
SUPERVEST DUCKWEAR SMALL/MED  TOTE TOOL 14-POCKET           37 POCKET -18IN TOTE BAG
TOTE TOOL 14-POCKET
Our Price: $60.03
37 POCKET -18IN TOTE BAG
Our Price: $61.43
18 oz. Duckwear canvas; mesh shoulder and full mesh back to keep you cool; 14 pockets to hold tools, pencils and pens; 2 quick release removable, adjustable pockets; web hammer loop. 1680 heavy-duty poly fabric. Open tote with diamond PVC reinforced bottom. Includes plastic small parts tray. Removable padded shoulder strap. 14 pockets inside and 23 pockets outside to organize tools and accessories; 13-1/2" x 3" multi-compartment plastic tray to organize small parts on top for easy access; padded web carrying handles and adjustable shoulder strap; abrasion resistant rubber feet; large zippered outside pocket and heavy-duty tape clip. 18"L x 11"W x 11"H.
CLC Tool Works 19427 N Tool Apron SUPERVEST DUCKWEAR LARGE/XLRG APRON CARPENTER 12 POCKET BLK
Made of heavy-duty leather. 4 main reversed nail/tool pockets, 6 smaller pockets fit pliers, nail sets, and pencils. (1) center pocket fits up to 30' measuring tape, and (1) combination square pocket. Metal snap-in hammer loop, 2" heavy-duty leather belt. Rivets, buckle and loops with antique brass finish. Does not include tools. 18 oz. Duckwear canvas; mesh shoulder and full mesh back to keep you cool; 14 pockets to hold tools, pencils and pens; 2 quick release removable, adjustable pockets; web hammer loop. 2 inch wide web belt with double-tongue roller buckle helps keep belt stable. 5 main pockets with 7 smaller pockets and sleeves for nails, parts, tools, nail sets, pencils, etc. Patented pouch handle allows for simple belt adjustments and easy one-hand carrying. Swinging "Snap-In" hammer holder makes it easy to secure your hammer. Double-gusset front pockets provide extra capacity and easy access. Heavy-duty leather.
CLC Tool Works 1579 Open Top Softsided Tool Bag Lenox 1787426 Contractor Large Open Mouth Tool Bag CLC H110BU Adjustable Extra Wide Work Suspender
Removable metal frame partition slides into place to customize tool box to your  storage needs. Wide open space below handle for easy access to tool carrier's main compartment. Sturdy metal handle bar with molded foam grip for easy carrying. Multi-use pockets to organize a wide range of tools and accessories. Adjustable, padded shoulder strap with metal hardware. 20"L x 11"H x 11"D. The 16" large open-mouth bag has 14 interior pockets, small parts bin, padded shoulder strap and reflective material; has reinforced water-resistant bottom. Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps.
TOOL BACKPACK CHARGING USB    CLC 2605 4-Piece Framers Tool Bag RIG CONTRACTORS 29-POCKET
RIG CONTRACTORS 29-POCKET
Our Price: $70.59
Use your DeWalt 20V MAX Lithium ion battery and our internal custom design battery dock as a USB charging source. Battery not included. USB charging battery dock simultaneously charge 2 devices via USB ports; 3 internal charging wall pockets fit tablet, phone and/or camera; low battery cut-off protection monitors battery voltage to avoid battery charge over-depletion; 20 multi-use pockets and 3 outside help organize a wide variety of hand tools. Rrugged, lightweight ballistic poly fabric; easy carry handle design provides simple adjustments, easy carrying and storage of apron without spilling contents; gussets keep front pockets wide open for greater access; bottoms of main pockets are reinforced with PVC material for better resistance to abrasion; built-in utility knife pocket helps prevent accidental pouch punctures; prybar or combination square holders; 5" wide padded comfort belt with double tongue steel roller buckle. Made of 1680 heavy-duty poly fabric. HV retro-reflective meets EN1150 worldwide standard. Infinity belt fits up to a 52 in. waist. Barrel-bottom, super capacity pouches. Reinforced pouch bottoms. Padded back support belt. Adjustable pouch system. Speed square pocket. Dual hammer loops. Steel buckle and monster grommets.
CLC 6714 5-Piece Rig Tool Belt Lift System CLC H110RU Extra Wide Tape Rule Work Suspender DeWalt DG5553 Closed Top Tool Bag
Unique, padded suspenders engineered to carry loads comfortably and distribute weight evenly without strain on lower back and hips. Easy carry handle design provides for simple adjustments and easy storage without spilling contents. New and improved pockets with more capacity and easy access to contents. Metal hook to carry cordless drill, nail guns or other power tools. 5" Wide padded comfort belt with double tongue  steel roller buckle.  Bottoms of main pockets are reinforced with PVC material for better resistance to abrasion. Heavy-duty, extra strength 2" wide work suspenders. Adjustable to fit most sizes. Heavy-duty front and rear clips, comfortable elastic rear straps. The 18" pop-open design allows for easy access to tools and parts and is made of heavy duty poly fabric, includes base pads to protect bottom and an adjustable shoulder strap. There are 26 exterior pockets including 2 flap-covered pockets, 14 interior pockets including one zippered pocket to secure valuables, utility knife pocket, measuring tape clip, easy double pull and heavy duty zipper.
BAG TOOL 12-POCKET            CLC Tool Works 1539 Multi-Compartment Tool Carrier CLC Tool Works 5608 4-Piece Tool Belt
BAG TOOL 12-POCKET
Our Price: $74.52
1680 heavy-duty poly fabric. Molded, waterproof bottom. Removable padded shoulder strap. StayPut? handle grips. Side pull handles. Waterproof zipper. ID window. 43 Pockets inside and 7 pockets outside to organize tools and accessories. Large center compartment to carry multiple power tools and accessories  and separate outside two compartments. Zippered side panels prevent spillage of tools when carrying or storing carrier. Vertical tool pockets keep them in sight for quick access. 18"L x 7"W x 14"H. Double layer or rugged, lightweight ballistic poly fabric with easy carry handle design provides for simple adjustments, easy carrying and storage of apron with spilling contents. Gussets keep front pockets wide open for greater access and bottoms of main pockets are reinforced with PVC material for better resistance to abrasion. Built-in utility knife pocket helps prevent accidental pouch punctures. 5" wide padded comfort belt with double tongue steel roller buckle. Fits waist sizes 29"-46".
BAG TOOL 28-POCKET            TOOLBELT CARPNTR CMB 6PC 28PKT BACKPACK LOW-PROFILE 22-POCKET
BAG TOOL 28-POCKET
Our Price: $78.08
1680 heavy-duty poly fabric. Gatemouth "Dr.'s bag" opening. Diamond PVC reinforced bottom. Removable padded shoulder strap. Double layer or rugged, lightweight ballistic poly fabric; adjustable and padded suspenders to hold and distribute weight comfortably; main pockets reinforced on bottom with PVC material for better resistance; 5" wide padded comfort belt with steel roller bucket. The Low-Profile backpack is durable with a low profile design. The backpack is constructed of 1680D ballistic material and rugged metal zippers providing unmatched durability for a longer life. With 22 pockets including a padded electronic sleeve, the backpack provides ultimate organization. The padded and breathable load-bearing harness evenly distributes the weight for unsurpassed comfort and jobsite performance with 2x more padding than competitive units.
RIG SUSPENSION MULLET BUSTER  RIG SUSPENSION HD 3PC         RIG SUSPENSION CARPENTER PRO
RIG SUSPENSION HD 3PC
Our Price: $87.51
Heavy-duty 1680d poly material; LoadBear stretch suspension for comfort; speed square pocket; adjustable velcro pouches; steel buckle belt with monster grommets; fits waists up to 52". Made of 1680 denier heavy-weight poly fabric. LoadBear? stretch suspension. Infinity belt fits up to 52 in. waist. Single body construction (no joints to fail). Barrel bottom pouches for extra capacity. Made of 1680 Denier heavy-weight poly fabric; "LoadBear" stretch suspension; infinity belt fits up to 52"; single body construction (no joints to fail); barrel bottom pouches for extra capacity.
DeWalt DG5617 Tool Apron With Yoke Suspenders BAG TOOL ALL TERRAIN BTM 18IN RIG SUSPENSION FRAMERS POLY
Apron has large, gusset style pockets, 7 main pockets with 13 smaller pockets and sleeves. Pouch handle allows for simple belt adjustments and easy one hand carrying. Fully adjustable, padded yoke style suspenders with Dri-Lex for added comfort, includes extra pocket and neoprene padded cell phone holder, 5" padded belt with Dri-Lex and double tongue roller buckle for added comfort and better belt stability. Heavy-duty 1680d poly material; molded waterproof rubber bottom; water resistant zipper; 17 pockets: 10 exterior, 7 interior; StayPut handle grips; removable padded shoulder strap; side pull handles; ID window. Size: 18" W x 11" D x 12" H. Made of 1680 Denier heavy-weight poly fabric; "LoadBear" stretch suspension; infinity belt fits up to 52"; single body construction (no joints to fail); barrel bottom pouches for extra capacity.
Tool Works 1134 Deluxe Tool Back Pack BACKPACK JOBSITE 35 POCKET    ELECTRODE STEEL 40LB 1/8IN
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
Tool Works Tool Back Pack, Deluxe, 13-1/2 in Length, 16 in Width, 8-1/2 in Depth, Zippered Closure, Polyester, Black, 48 Pockets, Padded Web Handle Features 35 pockets for organizing tools; impact resistant molded base protects and allows backpack to stand up; 1680 ballistic material; load-bearing harness - padded and breathable for all day comfort; laptop sleeve holds laptops up to 15.6"; bulk pocket - quick access to bulks items such as fish tapes and power tools; attachment strap - allows bag to be easily and securely attached to vertical handles. General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110.
ELECTRODE STEEL 40LB 5/32IN   ELECTRODE STEEL 40LB 1/8IN    ELECTRODE STEEL 40LB 5/32IN
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
General purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet metal, duct work, etc. Recommended Polarity: AC, DCEP, DCEN (Either Polarity). Tensile Strength (PSI): 83,000 Amperage: 70-110. Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190 Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches and chassis. Recommended Polarity: AC, DCEN, DCEP (Either Polarity). Diameter (Inches): 5/32" Weight Lbs. (Kg): 5 (2.26) Tensile Strength (PSI): 84,000 Amperage: 140-190
ELECTRODE STEEL 40LB 1/8IN    RIG SUSPENSION MULLT CAMO 52IN APRON TOOL BLU 29-POCKET
ELECTRODE STEEL 40LB 1/8IN
Our Price: $103.07
APRON TOOL BLU 29-POCKET
Our Price: $113.01
E6011 an all-position rod with strong arc force for deep penetration. Fast metal solidification facilities welding in vertical and overhead positions. Light slag allows for easy clean-up. Excellent for rusty steel because of the strong arc force. Useful for galvanized tanks, steel casting and pressure pipe. Recommended polarity: AC, DCEP, DCEN (Either Polarity). 1/8" Diameter,  22.7 Kg, 88,000 PSI tensile strength, 35-125 amperage. Heavy-duty 1680d poly material; LoadBear stretch suspension for comfort; speed square pocket; adjustable velcro pouches; steel buckle belt with monster grommets; fits waists up to 52". Made of 1680 heavy-duty poly fabric. LoadBear? stretch suspension for comfort. Infinity belt fits up to a 52 in. waist. Barrel-bottom, super capacity pouches. Reinforced pouch bottoms. Adjustable pouch and rigging system. Speed square pocket. Dual hammer loops. Steel buckle and monster grommets. Cell phone pocket fits up to an iPhone? 6. Adjustable chest strap buckle.
APRON TOOL TAN 29-POCKET      PACK TOOL 24-POCKET           BACKPACK HEAVY DUTY 48-POCKET
APRON TOOL TAN 29-POCKET
Our Price: $113.01
PACK TOOL 24-POCKET
Our Price: $118.13
Made of 1680 heavy-duty poly fabric. LoadBear? stretch suspension for comfort. Infinity belt fits up to a 52 in. waist. Barrel-bottom, super capacity pouches. Reinforced pouch bottoms. Adjustable pouch and rigging system. Speed square pocket. Dual hammer loops. Steel buckle and monster grommets. Cell phone pocket fits up to an iPhone? 6. Adjustable chest strap buckle. 1680 heavy-duty poly fabric. Tech compartment in back fits up to 13 in. laptop. Tablet compartment in front. Dual handles allow handling as a work station. Adjustable sling strap works on either shoulder. Designed for ultimate durability, protection and storage. The backpack has the most durable hard molded base on the market with up to 5x better durability than the competition. Constructed of 1680D Ballistic Material and with rugged metal zippers, the backpack provides unmatched durability. With 48 total pockets including 2 hard-shell pockets that are designed to protect electronics and equipment from impact, the backpack provides exceptional organization. The padded and breathable load-bearing harness evenly distributes the weight for unsurpassed comfort and jobsite performance with up to 2x more padding than competitive units.
RIG FRAMERS 3BAG HI-VIS HD PLY CLC 51452 4-Piece Pro Framers Tool Belt Pro Framer 21448 Tool Bag
Heavy-duty 1680d 2-Ply poly material; LoadBear stretch suspension for comfort; large capacity pouches; speed square pocket; adjustable velcro pouches; steel buckle belt with monster grommets; fits waists up to 52". Crafted from super tough, ballistic poly and top grain leather. Easy carry handle design provides simple adjustments, easy carrying and storage of combo without spilling contents. 8 main reversed nail/tool pockets, 17 smaller pockets fit pliers, nail sets, pencils, knife, etc, Leather combination square and pry bar holders.  5" wide padded comfort belt with double tongue steel roller buckle. Easy carry handle design provides simple adjustments, carrying and storage of combo without spilling contents. 5 main reversed nail/tool pockets. 10 smaller pockets fit pliers, nail sets, pencils, knife, etc. Leather holder fits up to 30' measuring tape. Leather combination square and pry bar holders. 2-3/4" wide heavy leather belt with double tongue steel roller buckle. Extra-strength rivets with washers at key stress points. Fits waist sizes 29"-46"
TOOL BACKPACK CHRG USB W/LIGHT RIG SUSPENSION FRAMERS HD NYLN BACKPACK TOOL 34-POCKET
BACKPACK TOOL 34-POCKET
Our Price: $151.49
USB charging battery dock simultaneously charges 2 devices via USB ports. Maximum 2 amps shared output. 3 internal charging wall pockets can hold a tablet, phone and/or camera and can charge 2 devices through a USB connection to a 20V MAX Lithium battery pack. Low battery cut-off protection monitors battery voltage to avoid battery over-depletion. Integrated 2-level LED light system allows adjustment for wide area illumination or close-up work. Multiple interior panels hold a multitude of tools and accessories like drills, extension cords, pliers, screwdrivers, wrench sets, drill bits, testers and much more. 31 multi-use pockets inside and 2 outside help organize a wide variety of hand tools. Padded web carrying handles and adjustable shoulder straps make carrying more comfortable and convenient. Large pads on back for extra comfort makes carrying heavier loads more comfortable on stress areas of the back. Easy double-pull, heavy-duty zipper. Base pad feet helps reduce wear and abrasion. Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Made of super heavy-duty ballistic nylon; "LoadBear" stretch suspension; infinity belt fits up to 52"; single body construction (no joints to fail); barrel bottom pouches for extra capacity. Made of 1680 denier poly material. Signature "Dead On" skull molded front pocket. Durable molded handle. Multiple front anchors for clip on carabiners. Main tool compartment: 19 pockets / holds drill / drill bit organizer. Front tool compartment: 7 pockets holds up to 8 in. screwdrivers. Rear tech compartment: 3 pockets / holds 17 in. laptop / tablet / files. Breathable straps with moisture-wicking lining on back to manage perspiration. Small front pocket & side cargo pockets. Cell phone holder fits up to iPhone? 6 Plus. Holds up to 50 lbs. Overall size: 20 in. x 17 in. x 10 in.
BAG ROLLING JOBSITE 18IN      BAG ROLLING HARDTOP 24IN      WELDING CABLE 1/0GA 50FT REEL
BAG ROLLING JOBSITE 18IN
Our Price: $177.62
BAG ROLLING HARDTOP 24IN
Our Price: $208.57
Features 6" All-Terrain metal rim wheels; industry's strongest extendable handle; all metal skid plates; full length metal axle; 200 lbs weight capacity; wide grip handle; fold down front panel; 1680D ballistic material construction; integrated tablet sleeve; 66 total pockets. Features hardtop construction, designed for stacking; 6" All-Terrain metal rim wheels; industry's strongest extendable handle; all metal skid plates; full length metal axle; 250 lbs of weight capacity; wide grip handle; fold down front panel and 1680D ballistic material construction. Highly flexible cable manufactured with 1,007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 volts. Conductor temperature range of -58? F (-50? C) to 221? F (105? C). Meets or exceeds ASTMB-172. 50' (15.24m) reel.
WELDING CABLE 4GA 125FT REEL  WELDING CABLE 2GA 125FT REEL
#4 gauge highly flexible welding cable manufactured with 378 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 volts.Conductor temperature range of -58? F (-50? C) to 221? F (105? C). Meets or exceeds ASTMB-172. #2 gauge highly flexible welding cable manufactured with 636 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600 volts. Conductor temperature range of -58? F (-50? C) to 221? F (105? C). Meets or exceeds ASTMB-172.
   
 
1