|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quilted nylon shell with fastener straps. Three layers of thick foam. Meets 16 CFR 1610, Class.
|
Lightweight hard hat offer superior balance on the head, allowing comfortable, all-day wearing. The unique 1-Touch suspension ensures that the hard hat can stay in place, even when bending over. Used in applications such as construction work, tree trimming or road work. Safety Works Hard Hats meet all applicable requirements of the American National Standards Institute ANSI Z89.1-2009.
|
Lightweight hard hat offer superior balance on the head, allowing comfortable, all-day wearing. The unique 1-Touch suspension ensures that the hard hat can stay in place, even when bending over. Used in applications such as construction work, tree trimming or road work. Safety Works Hard Hats meet all applicable requirements of the American National Standards Institute ANSI Z89.1-2009.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pinlock allows easy size adjustment; four-point, fully adjustable nylon suspension; large, pillow-padded sweatband for extra comfort.
|
TEKK Protection Hard Hat, Type 1, 4-Point Pinlock Suspension, Yellow, Class: Class G and E, ANSI Z89.1-2003, CSA Z94.1-2005
|
Universal size allows it to fit inside any hard hat. Soft two-ply liner for extra warmth. Flame-resistant shell material. Adjustable hook and loop chinstrap. Hook and loop straps secure liner to hard hat suspension.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contoured dome for sleek, trim profile. Short cap bill for greater upward vision. Antiglare 'Griptech' bill limits glare and improves bill grip. Lightweight design. Meets ANSI Z89.1+ for impact protection. Class C, G and E.
|
Contoured dome for sleek, trim profile. Short cap bill for greater upward vision. Antiglare 'Griptech' bill limits glare and improves bill grip. Lightweight design. Meets ANSI Z89.1+ for impact protection. Class C, G and E.
|
Provides sun protection for neck and ears; provides 360? reflective material; knit polyester mesh sun shade with contrasting trim; one size fits most hard hats; contains (1) sun shade/pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enables attachment of a variety of Huntsman visors to your safety cap, (Cap Coil Spring Attachment). Huntsman locking device holds visor securely in the down position or up out of the way. Turn button visor attachment holds 12" or 15 1/2" visors securely, allowing for fast, easy visor attachment and replacement. Meets CSA Standards.
|
Pinlock allows easy size adjustment; four-point, fully adjustable nylon suspension; large, pillow-padded sweatband for extra comfort.
|
Consists of a polyethylene shell and suspension working together as a protection system. Meets ANSI Z89.1 2009 for Type I helmets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Consists of a polyethylene shell and suspension working together as a protection system. Meets ANSI Z89.1 2009 for Type I helmets
|
Consists of a polyethylene shell and suspension working together as a protection system. Meets ANSI Z89.1 2009 for Type I helmets
|
Brim extends wide over the neck and ears, helping to reduce the amount of harmful UV radiation from the sun. Additionally, the brim is slightly shorter in the front, allowing the wearer to be able to look upward. This hard hat also features a ratchet suspension for quick and easy adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Six large cooling vents along the crown improve air circulation and comfort by reducing heat buildup. Patented easy-to-adjust ratchet design for added comfort and convenience. Special rain gutter along bottom edge helps reduce water dripping on neck. Low-profile and lightweight design for comfort over long periods. Lateral contours above the ear for easy integration of hearing protection. Patented "Glaregard" under brim reduces reflective glare from the sun. Super-soft absorbent sweatband for added comfort.
|
Heavy duty 8" wide elastic back panel and 5" side band for custom fit. 1-1/4" wide adjustable suspenders, 4 iinternal stays provide extra support. Tapered front panels for comfort while bending.
|
Heavy duty 8" wide elastic back panel and 5" side band for custom fit. 1-1/4" wide adjustable suspenders, 4 iinternal stays provide extra support. Tapered front panels for comfort while bending.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy duty 8" wide elastic back panel and 5" side band for custom fit. 1-1/4" wide adjustable suspenders, 4 iinternal stays provide extra support. Tapered front panels for comfort while bending.
|
Heavy duty 8" wide elastic back panel and 5" side band for custom fit. 1-1/4" wide adjustable suspenders, 4 iinternal stays provide extra support. Tapered front panels for comfort while bending.
|
Universal slots accommodate hearing, welding and faceshield accessories. Comfortable six-point nylon suspension with cloth sweatband. Meets ANSI Z89.1, 2003 Type I, Class G, E and C Standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The hard hat has a lightweight, rugged polyethylene hard hat shell, that is balanced on the head by the continuous loop nylon fabric suspension straps. Standards: ANSI Z89.1, Class e, CSA Z94.1-05 and Type 1.
|
Consist of a polyethylene shell and suspension working together as a protection system. Polyethylene shell. Meets ANSI Z89.1 2009 for Type I helmets.
|
Features a 4-point ratchet adjustment suspension for one hand adjustment; provides extra protection against the sun to help prevent ear and neck sunburn; meets ANSI Z89.1, Class C, E and G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brim extends wide over the neck and ears, helping to reduce the amount of harmful UV radiation from the sun. Additionally, the brim is slightly shorter in the front, allowing the wearer to be able to look upward. This hard hat also features a ratchet suspension for quick and easy adjustment.
|
Consist of a polyethylene shell and suspension working together as a protection system. Meets ANSI Z89.1 2009 for Type I helmets.
|
Consist of a polyethylene shell and suspension working together as a protection system. Meets ANSI Z89.1 2009 for Type I helmets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sun Shield extends the brim all the way around to help protect ears and neck from sun rays. Made of polyurethane (front portion is Lexan,smoke tint). Hats not included with shields.
|
For permanent use on wood rooftops; meets standards for fall arrest; easy installation; stainless steel; comes with a D-Ring on one end.
|
Ratchet style suspension for use with "Skullgard" protective caps/hats and "Comfo" Cap protective headwear. Hat not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Meets all standards for fall arrest; the product has a durable zinc chromate finish and can be installed with screws or duplex nails (depending on roof pitch); fasteners provided; for temporary use on wood rooftops.
|
Wide brim for protection against harmful UV rays. Excellent protection from rain, sun, heat and glare. 4 point nylon ratchet suspension. Meets ANSI Z89.1 standards. Class C, G and E.
|
Wide brim for protection against harmful UV rays. Excellent protection from rain, sun, heat and glare. 4 point nylon ratchet suspension. Meets ANSI Z89.1 standards. Class C, G and E.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High impact resistant ABS helmet; ventilation holes; rain gutter; durable stainless steel mesh visor; strong flip up and down function; detachable sun peak; articulated cap-mounted ear cups; height-adjustable ear muffs; NRR value 23dB; "Air Flow Control" technology for optimum and consistent noise attenuation and enhanced communication; snap-in comfortable ear cushions; ratcheting adjustment harness; head size 20-24.5" (50-62 cm); snug-fit harness and highly absorbent sweatband.
|
Composed of 1" thick nylon webbing and a clear shock absorber pack for easy inspection; easy to use attached self double locking snap hooks.
|
Designed for permanent use on wood rooftops and it is easy to install; this anchor has a D-Ring located on both ends; meets all standards for fall arrest; easy installation; composed of stainless steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Comes with weather proof cap, flashing and fasteners; installs in less than a minute; attach Truss Boss anchor to truss while on the ground; waterproof flashing for both composite and tile roof; non-corrosive anchor.
|
Stainless steel; connects to various anchor points; opens by squeezing spring loaded hook.
|
Features dual lanyard keepers that reduce the risk of dragging and snagging lanyards; a special identification label allows for your employees to personalize their harness without jeopardizing the integrity of the webbing; comes equipped with finished webbing ends to prevent them from fraying or getting damaged as well as providing a clean and professional look; the unique red webbing core of the harness provides a visual warning to the user in the case that the webbing has been damaged and should be taken out of service; size: small - large.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features dual lanyard keepers that reduce the risk of dragging and snagging lanyards; an identification label allows for employees to personalize their harness without jeopardizing the integrity of the webbing and comes equipped with finished webbing ends; pass thru - chest, pass thru - legs. Sizes: XL-XXL.
|
Full body harness with tongue buckle legs and pass thru chest; 1 back D-Ring for connection; 5 point harness allows user to adjust the size for a perfect fit; finished webbing ends: keeps the webbing ends from getting damaged as well as providing a clean and professional look; webbing wear indicator: provides a visual warning to the user and safety director that the webbing has been damaged and should be taken out of service; a special identification label allows for your employees to personalize their harness without jeopardizing the integrity of the webbing; meets OSHA and ANSI standards.
|
Easy to use and designed for one hand operation; primarily used to securely attach lanyards or lifelines to anchorages; offers a maximum strength up to 5,000 lbs and has a 3/4" gate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro forest helmet system. Includes: UV protected hardhat, adjustable 6 point suspension, hearing protectors, face screen, rain and neck protector, new high visibility orange color for improved safety, meets ANSI Z89,1-2003 class G-E-C standards. AVAILABLE TO REGISTERED HUSQVARNA DEALERS ONLY.
|
Made with heavy duty outer polyester webbing and a polyester core specifically sewn in to reduce impact forces; does not stretch and has no shock pack; lightweight.
|
Specially designed with five points of adjustment and stretch ability in the shoulders/back; includes: quick adjust torso buckles, (2) lanyard keepers and an impact indicator; model's size is built specifically for individuals whose height ranges from 5' to 6'3" and whose weight ranges from 140 to 250 pounds. Sizes: M-L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardhat wearers can express their patriotism and protect their heads by wearing one of MSA's new special series of Freedom caps. The bright designs on the cap's .030-inch thick vacuum-formed glossy cover are very attractive and have a superior finish. Hard Hats meet all applicable requirements of the American National Standards Institute ANSI Z89.1-2009.
|
Complies with OSHA regulation 1926.1053(b)(1); lightweight aluminum; allows for secure attachment, without penetration of the fascia board or to rafters; ideal for workers needing to access rooftops of existing or new homes; no special tools are required and it only takes seconds to attach.
|
Impact resistant and offers protection against falling objects and overhead hazards; equipped with MSA's comfortable "Fas-Trac" suspension; meets all applicable requirements for a type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (class E) and CSA Z94.1-2005 (class E); meets the voluntary standard for reverse donning and low temperature (LT) as prescribed by ANSI/ISEA Z89.1-2009; third-party certified by the Safety Equipment Institute (SEI).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Impact resistant and offers protection against falling objects and overhead hazards; equipped with MSA's comfortable "Fas-Trac" suspension; meets all applicable requirements for a type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009 (class E) and CSA Z94.1-2005 (class E); meets the voluntary standard for reverse donning and low temperature (LT) as prescribed by ANSI/ISEA Z89.1-2009; third-party certified by the Safety Equipment Institute (SEI).
|
Comfort-fit, nylon crown suspension straps; stylish painted look finish is permanently molded-on graphics; ratchet suspension for quick and easy adjustments; conforms to the American National Standards Institute's safety standards.
|
Features dual lanyard keepers that reduce the risk of dragging and snagging lanyards; an identification label allows for employees to personalize their harness without jeopardizing the integrity of the webbing; finished webbing ends; webbing wear indication; pass thru - chest, tongue buckle - legs. Sizes: XL-XXL.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifically designed with five points of adjustment and stretch ability in the shoulders/back; product includes: (1) quick adjust torso buckles, (2) lanyard keepers and an impact indicator; model's size is built specifically for individuals whose height ranges from 5'2" to 6'8" and whose weight ranges from 220 to 360 pounds. Sizes: XL-XXL.
|
Composed of 1" thick nylon webbing and a clear shock absorber pack for easy inspection; easy to use attached self double locking snap hooks.
|
Ideal for work in tight spaces or around machinery, since its stretching capability helps reduce hazards of tripping or catching on moving parts; the lanyard stretches from between 4-1/2' to 6' and is available in a variety of connector options; lightweight and its unique design eliminates the need for an external shock absorber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits any roof pitch; convenient and disposable; easy to install by nailing into the truss and easy to remove by hammering over the attachment point when the job is done; fasteners provided; meets all OSHA and ANSI standards.
|
Allow workers to lean away from walls while keeping their hands free; must be accompanied by a harness with side positioning rings, such as the "Guardian" HUV-3; positioning device systems are combinations of equipment which are intended to permit the user to use both hands freely while being supported on an elevated vertical surface as in rebar and concrete form work; designed to comply the latest, most stringent requirement of ANSI A10.32-2004; web assembly model.
|
Ideal for positioning and restraint situations; can be quickly adjusted from 4 to 6 feet in length; comes with a shock absorber.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifically designed with five points of adjustment and stretch ability in the shoulders/back; product includes: (1) quick adjust torso buckles, (2) lanyard keepers and an impact indicator; model's size is built specifically for individuals whose height ranges from 5'2" to 6'8" and whose weight ranges from 220 to 360 pounds. Sizes: XL-XXL.
|
Specifically designed with five points of adjustment and stretch ability in the shoulders/back; product includes: (1) quick adjust torso buckles, (2) lanyard keepers and an impact indicator; model's size is built specifically for individuals whose height ranges from 5'2" to 6'8" and whose weight ranges from 220 to 360 pounds; this version of the "Seraph Universal Harness" possesses side D-rings. Sizes: XL-XXL.
|
Specially designed with six points of adjustment, dorsal and side D-rings and improved flexibility in the shoulder and back for added comfort; includes an integrated impact indicator that clearly identifies if it has been exposed to forces of a fall, lanyard keepers with the dual function of securing excess webbing and serving as retrieval hoists and "Quick-Adjust" friction torso buckles for fast and easy resizing; ideal for the standard construction worker and is lightweight and incredibly durable.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy to install and designed to lock automatically when a fall occurs; designed to fit 5/8" to 5/16" thick safety ropes; simply squeeze to move positioning device and it will lock automatically.
|
'Sweatbands' custom design fits all MSA helmets. Washable and has plastic snaps.
|
Specially designed with five points of adjustment and stretch ability in the shoulders/back; includes: quick adjust torso buckles, (2) lanyard keepers and an impact indicator; model's size is built specifically for individuals whose height ranges from 5' to 6'3" and whose weight ranges from 140 to 250 pounds. Sizes: M-L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HUV universal harness has 5 points of adjustment for added comfort. The vertical lifeline assembly contains a 50 ft. lifeline, shock pack and positioning device with 18-Inch extension lanyard. This kit also comes with a heavy duty temper reusable anchor point to attach onto the ridge of the roof. Used for residential rooftop safety.
|
Heavy-duty 5/8" poly rope; resists cuts and abrasions; attached self locking carabiner; complete assembly includes: shock absorber, positioning device, 18" extension lanyard and (2) double locking snap hooks; no tangle lifeline available with swivel snap hook.
|
Offers an all in one approach to fall protection; includes a type of anchor (SS72), lanyard and HUV harness; easy carry and storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offers an all in one approach to fall protection; kit includes: (2) Reusable anchors; 25' VLA Shock Pack positioning device with 18" extension lanyard; (1) HUV harness; easy carry and storage.
|
Includes a universal fit harness HUV (01101) with an attached 6' internal shock lanyard (sku 639.7582) and a heavy duty ballistic nylon bag with Velcro closure (00762); the grommets on the bag allow for you to attach the bag to a lift basket.
|
Specially designed with six points of adjustment and stretchable shoulder straps; the product includes: shoulder pads, cradle seat, quick adjust torso buckles, padded waist belt, D-ring lanyard keepers (which double as retrieval hoists), impact indicator, hammer loops and tongue buckle leg straps; the model's size is built specifically for individuals whose height ranges from 5' to 6'3" and whose weight ranges from 140 to 250 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty 5/8" poly rope; resists cuts and abrasions; attached self locking carabiner; complete assembly includes: shock absorber, positioning device, 18" extension lanyard and (2) double locking snap hooks; no tangle lifeline available with swivel snap hook.
|
Features heavy-duty construction for use as head protection in steel mills and other heavy industries where elevated temperatures are common. Low profile, smooth crown helmet. May be painted. Outstanding thermal properties for areas with elevated temperatures. Meets ANSI Z89.1 2009 for Type I helmets. Applications: Agriculture, Asbestos Abatement, Chemical, Construction. WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.
|
Carabiner included; steel or aluminum snap hooks or rebar hooks; lightweight and durable; fits in the palm of your hand-now with an even smaller housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built by the roofer for the roofer and is the only roofing kit that incorporates an integrated shock absorber into the lifeline; user will never have to worry about adding a shock absorbing lanyard to his fall protection system; by removing the shock pack from the workers back, less dead weight is transferred to the dorsal D-ring; includes: Bucket; (1) Temper Anchor; 25' VLA Shock Pack positioning device with 18" extension lanyard and HUV harness; easy carry and storage; comes with a reusable tempered anchor point model 00455 (sku 829.6410).
|
Features heavy-duty construction for use as head protection in steel mills and other heavy industries where elevated temperatures are common. Low profile, smooth crown helmet. May be painted. Available in standard sizes. Outstanding thermal properties for areas with elevated temperatures. Meets ANSI Z89.1 2003 for Type I helmets. WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.
|
Ideal for work positioning and restraint applications; quickly adjusts from 4' to 6'; available with or without shock absorber. Applicable standards: ANSI Z359.13-13, ANSI A10.32-13, OSHA 1926 Subpart M, OSHA 1910. Worker Capacity Range: 130-310 lbs. Webbing Material(s): Polyester and Nylon.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features heavy-duty construction for use as head protection in steel mills and other heavy industries where elevated temperatures are common. Low profile, smooth crown helmet. May be painted. Available in standard sizes. Outstanding thermal properties for areas with elevated temperatures. Meets ANSI Z89.1 2003 for Type I helmets. WARNING: Do not mix suspension and helmet sizes. Make sure the sizes match (i.e., standard-size suspension with standard-size helmet). Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death.
|
Designed with an ergonomic frame to make handling more comfortable for the user; product is lightweight (weighing under 4 pounds) and composed of a durable aluminum housing; offers dependable performance with its quick-action braking system; meets or exceeds all applicable industry standards including OSHA and ANSI; no recertification is required with this product as it is considered a disposable unit; manufactured in the U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits any roof pitch; convenient and disposable; easy to install by nailing into the truss and easy to remove by hammering over the attachment point when the job is done; fasteners provided; meets all OSHA and ANSI standards.
|
Fits most brands and styles of standing seam roofs and is completely reusable; unique reversible design allows for seams up to 1" to make sure you've got the perfect anchor from job to job; anchors securely without damage to completed roof; designed for one person single tie off and can be used with retractable; meets all applicable anchor durability reusable/temporary standards as set by OSHA.
|
Offers an all in one approach to fall protection; includes (1) a universal fit harness HUV ( model # 01101); (2) Vertical Lifeline Assembly with shock absorber, positioning device with attached 18" extension lanyard and 2 double locking snap hooks; (3) SOS bag with sturdy zipper and (4) 1 Temper Anchor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offers an all in one approach to fall protection; includes (1) a universal fit harness HUV ( model # 01101); (2) Vertical Lifeline Assembly with shock absorber, positioning device with attached 18" extension lanyard and 2 double locking snap hooks; (3) SOS bag with sturdy zipper and (4) 1 Temper Anchor.
|
Compact and lightweight design; numerous lengths available; galvanized cable or web lifeline; carabiner included; meets or exceeds all OSHA & ANSI standards.
|
Offers a compact and lightweight designed fall protection system; the product's durable aluminum housing, high strength composite cable guide, stainless steel and non-corrosive components extend the life of the unit and it also offers a quick-action breaking system; comes with swivel top, carabiner and tag line; meets or exceeds all applicable industry standards including OSHA and ANSI; manufactured in the U.S.A.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on wood, metal deck or concrete substrates; durable galvanized finish; great for use with retractable lifelines, vertical lifelines / rope grab units or horizontal lifeline systems; post extends past roofing substrate to keep attachment point high enough that it is still accessible after the roof is complete; round post works with most off-the-shelf flashing kits.
|
|
|
