Home > HOUSEWARES > CLEANING SUPPLIES > BROOMS AND MOPS > WAREHOUSE BROOMS
Sort By:
1
Danco 80787 Round Hose Washer Danco 80070 Hose Washer With Screen Worldwide Sourcing PMB-455-3L Lint Traps
5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick. 5/8" hose size: 9/16"ID x 1"OD. 2--piece.
Plumb Pak PP850-15 Filter Hose Washer With Screen Plumb Pak PP820-46 Lint Trap With Twist Tie Danco 36333B Round Hose Washer
Plumb Pak Filter Hose Washer, 3-3/4 in Height X 1-7/8 in Width Plumb Pak Lint Trap, 10 in Height X 7 in Width, Nylon, Plastic Mesh 5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick.
Simmons 1305 Pressure Gauge Simmons 1306 Pressure Gauge Plumb Pak PP2082044 Lint Trap With Twist Tie
Suitable for air, steam or water. Easy to read dial face. Steel case with glass face, accurate reading guaranteed. Brass socket connection. Suitable for air, steam or water. Easy to read dial face. Steel case with glass face, accurate reading guaranteed. Brass socket connection. With twist tie.
Swivel Snap C702024 Rust Resistant Dust Mop Frame Plumb Pak PP820-44 Lint Trap With Twist Tie Simmons 1307 Pressure Gauge
Heavy-duty, industry standard frame constructed of rust resistant black powder coated metal wire for long life. Features welded one-piece construction.  Use with Swivel Snap and Tie Free Dust Mop Frames. With twist tie. Lead free, steel case, brass mount, 1/8" C.B.M connection.
Simmons 1243 Air Valve Quickie HomePro Mop Refill PUMP DRILL 3/4IN GHT
For all charging applications. For use with conventional tanks. Washable, soft terry cloth mitt will not scratch or damage floors, can be used either wet or dry, and on all smooth floor surfaces. Refills No.076 (SKU 849.8099) dust mop. Dimensions: 5"W x 6"D x 9"H. Works with most drills. Easy to install, thermoplastic construction, corrosion resistant steel shaft. Connects to garden hose, 3/4" suction and discharge, maximum drill* speed 1200 rpm, recommended drill chuck size: 3/8" or larger. Drill and garden hose sold separately.
E-Line Tie-Free Wilen C414024 Back Treated Dust Mop Head Danco 36335B Hose Washer Swivel Snap C702036 Rust Resistant Dust Mop Frame
4-ply cotton/synthetic yarn. Polyester backing. Slot pocket sewn backing. 5" back. Available pre-treated with Dust N' Shine or untreated. Use with Swivel Snap Dust Mop Frames. 5/8" hose size: 9/16"ID x 1"OD. Heavy-duty, industry standard frame constructed of rust resistant black powder coated metal wire for long life. Features welded one-piece construction.  Use with Swivel Snap and Tie Free Dust Mop Frames.
Simmons 1244 Air Valve VALVE GARDHOSE 1/2PEX X 3/4MH Imperial BM0042 Large End Stove Pipe Slip Joint with 2 in Collar
For all charging applications. For use with conventional tanks. Allows custom connection between tow pipe joints without cutting pipe.
Chickasaw 206 Wedge Shape Dust Mop Head E-Line Tie-Free Wilen C404036 Back Untreated Dust Mop Head Quickie 0774RMCAN-15 Mop Refill
Fits model No.00205 dust mop. 4-ply cotton/synthetic yarn. Polyester backing. Slot pocket sewn backing. 5" back. Available pre-treated with Dust N' Shine or untreated. Use with Swivel Snap Dust Mop Frames. Washable soft cloth terry mitt will not scratch or damage floors, can be used either wet or dry, and on all smooth floor surfaces. Refills No.077 (SKU 242.6591) dust mop. 15 x 8".
Rubbermaid M253000000 Dust Mop Frame Danco 36334B Oval Hose Washer Watt P-683 Push Fit Angle Stop Valve
Corrosion resistant, powder coated, heavy-duty metal frame for durable performance. Handles that will fit dust mop frame are (SKU 838.4232), No. M116000000 and (SKU 841.1456), No. M136000000. 5/8" hose size: 13/16"ID x 1-3/16"OD x 1/8" thick. Bagged. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged.
Sta-Rite FPDMP21SA Parts2O Swivel Snap C702048 Rust Resistant Dust Mop Frame Quickie HomePro Soft Swivel Dust Mop Refill
Works with any drill (1200 RPM or higher). Perfect for emptying overflowing dishwashers, washing machines, aquariums and clogged sinks. Pumps up to 225 GPH. Self-priming. Heavy-duty, industry standard frame constructed of rust resistant black powder coated metal wire for long life. Features welded one-piece construction.  Use with Swivel Snap and Tie Free Dust Mop Frames. Use as a dust mop or use with your favorite disposable dusting sheets. Attracts dirt and dust like a magnet and is machine washable. Refills No. 060 (SKU 165.1959) dust mop.
Quarter Master 102-209 Replacement Washing Machine Valve Quarter Master 102-210 Replacement Washing Machine Valve Quickie 654 Swivel-Flex Dust Mop Refill
125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged. 125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged. 360 degree swivel connector. Flexible plastic frame to get into corners and base boards. 100 percent virgin nylon yarn gathers and collects dust. 48" powder coated steel handle with hang-up feature.
Imperial BM0044 Large End Stove Pipe Slip Joint with 2 in Collar Simmons 946 Extra Heavy Recessed Drive Coupling Watt P-681 Push Fit Supply Line Valve
Allows custom connection between tow pipe joints without cutting pipe. Reduces O.D. to allow for greater waterway. Entire coupling galvanized. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved.
Rubbermaid M255000000 Dust Mop Frame DUSTER CEILING FAN MICROFIBER Chickasaw #25 Dust Mop
MOP FLOOR MICROFIBER
Our Price: $11.63
Corrosion resistant, powder coated, heavy-duty metal frame for durable performance. Handles that will fit dust mop frame are (SKU 838.4232), No. M116000000 and (SKU 841.1456), No. M136000000. For cleaning ceiling fan blades. The microfiber helps grab and trap dust and. The microfiber head contours around the blade to effectively remove surface and caked on dust and debris with ease. The 60? extension handle provides long reach capabilities, or you can simply unthread the dusting head and use as a short reach fan blade cleaner. Blended yarn sewn onto mitt. Metal frame with color coordinated handle.
Flair-It 16887 Flair-It Washing Machine Valves PEX VALVE WASH 1/2X3/4INMGH   PEX VALVE WASH 1/2X3/4INMGH
For hot or cold water. Used for connecting washing machine hose to PEX or Polybutylene tubing. Bar coded. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
Quickie 65 Swivel-Flex Dust Mop Simmons 1695 Malleable Point Well Drive Cap Swivel Snap C057024 Dust Mop Head
360 degree swivel connector. Flexible plastic frame to get into corners and base boards. 100 percent virgin nylon yarn gathers and collects dust. 48" powder coated steel handle with hang-up feature. Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation. Industry standard dust mop is constructed of 4-ply cotton blended yarn tufted or sewn to a durable synthetic backing. Absorbent yarn provides excellent dust retention. Use with Swivel Snap Dust Mop Frames.
Quickie 077RMCAN-18 Professional Mighty Mop JANITOR BROOM                 Chickasaw 224 Dust Mop Head
Soft, washable terry cloth mitt will not scratch or damage floor, can be used either wet or dry, and on all smooth surfaces including wood, vinyl, and smooth tile. Larger head than HomePro with 360-degree swivel connector for hard-to-reach places. 48" steel handle with swivel hang-up for easy storage. Uses No.0774RM (SKU 474.4603) refill dust mop head. Broom corn and sotol fiber, velvet cloth and bright wire finish. 1-1/8" black handle. Removable, replaceable and washable. Made of cotton. 3-1/2" x 24".
BROOM WHSE CRN/SOTL FIBER     Quickie HomePro Soft Swivel Dust Mop BROOM WHSE CRN/SOTL FIBER HVYD
1 wire band and 4 sewn, 1-1/8" clear handle, broom corn and sotol fiber. Flexible, easy to use dust mop features ultra-soft, ultra-dense microfiber/chenille head which attracts dirt and dust like a magnet. Use as a dust mop or use with your favorite disposable dusting sheets. Does everything a conventional floor duster does and more. Removable and replaceable mitt is machine washable. Flexible plastic frame gets into corners &  base boards. 360? swivel connector. 48? powder coated, steel handle with hang-up feature. Uses No. 0604 (SKU 385.5095) dust mop refill. For indoor or outdoor use. 3 rows of stitching and wire band for extra strength. Heavy-duty 1-1/8" x 42" lacquered hardwood handle. 100-percent natural broom corn. 12" sweeping range.
Quickie HomePro Mighty Mop Kut-A-Way FGK25328BL00 Cut End Dust Mop Refill SHOCK ABSORBER WATER SUPPLY
Soft, washable terry cloth mitt will not scratch or damage floor, can be used either wet or dry, and on all smooth surfaces including wood, vinyl, and smooth tile. 360-degree swivel connector for hard-to-reach places. 48" steel handle with swivel hang-up for easy storage. Uses No.0764 (SKU 091.2691) refill dust mop head. Cut-end mop excellent for general purpose dust mopping. Pre-laundered and pre-shrunk. Launderable for long product life. Envelope backing style. Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe.
BROOM HEAVY DUTY NATURAL FIBER Camco 20752 Washing Machine Pans Swivel Snap C057036 Dust Mop Head
100-percent highest quality natural fibers. Four rows of nylon stitching. Wire wound. 1 1/8" x 40" metal handle. High impact white polypropylene. Includes PVC drain fitting. Bottom or side fitting (not pre-cut). Industry standard dust mop is constructed of 4-ply cotton blended yarn tufted or sewn to a durable synthetic backing. Absorbent yarn provides excellent dust retention. Use with Swivel Snap Dust Mop Frames.
Mueller 102-207 Dual Washing Machine Shut-Off Valve Chickasaw 205 Wedge Dust Mop Plumb Pak PP855-50 Drill Powered Pump
Single lever control. Ball valve construction. 3/4" hose thread outlet.Hose threads comply with B1.20.7. Solder ends comply with ANSI B16.18. Threaded ends complhy with ANSI B1.20.1. Cotton yarn double stitched to heavy sanforized canvas backing. Replaceable, removable and washable head. Attaches to electric drill. Standard hose threads.
DRAIN PAN WASHMACH WHITE W/PVC BROOM WHSE CRN/SOTL FIBER     Imperial BM0024 Crimped Elbow
For front-loading machines. High impact white polypropylene. 31" x 35" OD and 29" x 33"ID. 1-1/2" PVC drain. Black lacquered wood handle. Used to connect two lengths of flue pipe together.
Kut-A-Way K15300WH00 Cut End Dust Mop Head Rubbermaid J25300BL00 Blend Twisted Loop Dust Mop Head BROOM WAREHOUSE BLUE 12IN
Pre-laundered and pre-shrunk mop for general purpose dust mopping. Envelope backing style. Pre-laundered dust mop designed for maximum durability and optimal cleaning performance. No snagging, fraying or unraveling. Slip on/slip through backing for easy set up. Ideal for one-handed cleaning under tables, fixtures and hard to reach areas. Sweeps fine or coarse material.12 in sweep face. 58.25" overall length.
Selkirk DoubleWall Fixed Length Stove Pipe 6 in ID Swivel Snap C057048 Conventional Dust Mop Head Simmons 152 Double Drop Double Hole Well Seal
Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. Industry standard dust mop is constructed of 4-ply cotton blended yarn tufted or sewn to a durable synthetic backing. Absorbent yarn provides excellent dust retention. Use with Swivel Snap Dust Mop Frames. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
Simmons 111 Single Drop Single Hole Well Seal Rubbermaid K75500WH00 Twisted Loop Dust Mop Head Kut-A-Way K15500WH00 Cut End Dust Mop Head
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. Pre-laundered dust mop designed for maximum durability and optimal cleaning performance. No snagging, fraying or unraveling. Slip on/slip through backing for easy set up. Pre-laundered and pre-shrunk mop for general purpose dust mopping. Envelope backing style.
Rubbermaid J25500BL00 Blend Twisted Loop Dust Mop Head STEAM DRYER INSTALLATION KIT  Kut-A-Way FGU83228BL00 Dust Mop
Pre-laundered dust mop designed for maximum durability and optimal cleaning performance. No snagging, fraying or unraveling. Slip on/slip through backing for easy set up. 24" mop.
Simmons 136 Single Drop Single Hole Well Seal PUMP HAND MANUAL MULTI PURPOSE Simmons 177 Double Drop Double Hole Well Seal
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. Pumps up to 1 gallon per 4 full strokes. Includes 6' drain hose. Works great for draining water from boats, toilets, sinks, rain barrels, pools, fountains, ponds, lakes & general water transfer. Two size options: 36" water pump or 18" water pump. Includes garden, suction and drain hose adapters. Easy to assemble and requires no electricity to operate. Garden hose adapter included. Made from high quality thermoplastic. Disassembles quickly for easy storage.High quality aluminum push rod with ergonomic handle. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
Quickie 069-4 Long Head Dust Mop Sure-Temp 266086 Double Wall Adjustable Length Smoke Pipe Sure-Temp 266024 Double Wall Fixed Length Smoke Pipe
100% cotton dust mop. 24? long mop head. Steel frame. Steel handle. Used to adjust pipe to desired length. Adjustable from 12" to 18", eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8" per joint. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Sta-Rite Industries FP217-810 Well Pump Control Box Sta-Rite Industries FP217-811 Well Pump Control Box Lysol 57067CAN Dust Mop
For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. Non-slip grip handle. Attracts and traps dust like a magnet. Flexes to clean baseboards. Swivels to clean under furniture. This "Lysol" cleaning tool contains an antimicrobial agent that prohibits the growth of odor causing germs, bacteria, mold and mildew (on the mop fibers) for the life of the tool. Use No. 570674, (SKU 473.4117) refill.
Selkirk 268086 Double Wall Adjustable Length Smoke Pipe Simmons 758 Waterlight Well Cap Sta-Rite Industries FP217-812 Well Pump Control Box
Used to adjust pipe to desired length. Adjustable from 12" to 18", eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8" per joint. Heavy duty cast iron, 5 bolt construction, 1/4" grounding lug, 9/16" screened vent, non toxic lead free paint, 1" NPT conduit connection. Casing ID.: 6" & 6-1/4" For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed.
Sure-Temp 266036 Double Wall Fixed Length Smoke Pipe DAMPER JOINT 6X24IN BLACK     Selkirk 267036 Double Wall Smoke Pipe
Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. With damper hole. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Imperial BM0102 Half Joint Stove Pipe Imperial BM0101 Stove Pipe Imperial BM0103 Half Joint Stove Pipe
Used to connect woodstove to entrance of chimney. Crimped on one end. Used to connect woodstove to entrance of chimney. Crimped on one end. Used to connect woodstove to entrance of chimney. Crimped on one end.
Simmons 0 Well Point Simer 5020B Pedestal Sump Pump Flotec FPPSS3000 Pedestal Sump Pump
Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Durable thermoplastic body resists corrosion. Efficient motor with 115V thermal overload protection. Vertical float switch designed for minimum 12" diameter sump basin. Pumps up to 3480 GPH. CSA certified. Durable thermoplastic body resists corrosion. Efficient motor with 115V thermal overload protection. Vertical float switch designed for minimum 12" diameter sump basin. Pumps up to 3480 GPH. CSA certified.
Selkirk 268036 Double Wall Fixed Length Smoke Pipe Superior Pump 92330 Sump Pumps Superior Pump 92333 Pedestal Sump Pumps
Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. 1/3HP split capacitor motor - high efficiency - low Amp draw, 10' grounded waterproof cord, pumps up to 40 gallons per minute, 2400 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4" male iron pipe discharge thread, 1-1/4" female pipe adapter and 1-1/2" male iron pipe adapter included. One year warranty from Superior Pump Co. For use in sump basins 12" or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 1-1/4" discharge. 2.76 amps, 10' cord. Pumps up to 50gpm/3000gph. One year warranty from Superior Pump.
Simmons 0 Well Point Superior Pump 92370 Submersible Sump Pumps Simmons 0 Well Point
Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. 1/3HP split capacitor motor - high efficiency- low Amp draw, corrosion resistant plastic, 10' grounded water proof power cord, pumps up to 48 gallons per minute, 2880 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. One year warranty from Superior Pump Co. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed.
Simmons 0 Well Point Imperial BM0104 Half Joint Stove Pipe Superior Pump 92331 Sump Pumps
Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Used to connect woodstove to entrance of chimney. Crimped on one end. 1/3HP split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded water proof power cord, pumps up to 46 gallons per minute, 2760 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. Stainless steel impeller. Three year warranty from Superior Pump Co.
Imperial BM0220 Stove Pipe 6 in ID Superior Pump 92372 Submersible Sump Pumps Superior Pump 92301 Pedestal Sump Pumps
Used to connect woodstove to entrance of chimney. 24 gauge. 1/3HP split capacitor motor - high efficiency - low Amp draw, corrosion resistant plastic, 10' grounded waterproof power cord, pumps up to 48 gallons per minute, 2880 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy  back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. One year warranty from Superior Pump Co. For use with sump basins 12" or larger. Cast iron base, metal switch arm, 1-1/2" discharge, stainless steel drive shaft, impeller and float ball. Will handle liquids up to 180 degrees F. 2.76 amps, 10' cord. Pumps up to 50gpm/3000gph.Three year warranty from Superior Pump.
Flotec FPZS25T Submersible Sump Pump With Tethered Float Switch Simer 2905 Submersible Sump Pump With Tethered Switch Little Giant RL-SP25T Submersible Sump Pump With Tethered Float Switch
Durable thermoplastic construction for corrosion resistance.  Efficient motor with automatic thermal overload protection.  Automatic tethered switch designed for minimum 14" diameter sump basin.  Pumps up to 3200 GPH. 1-1/2" discharge and 8' grounded power cord.   CSA certified. Durable thermoplastic resists corrosion.  Automatic operation, designed for minimum 14" sump basins.  Pumps up to  3200 GPH.  Dependable motor and float switch for automatic or manual operation.  1-1/2" discharge, and 8' power cord.  Self-cleaning screen - reduces maintenance.  CSA certified. Automatic submersible sump pump. Ideal for use in basins 14" diameter or greater with light water removal needs. Reinforced thermoplastic pump housing and base are corrosion and rust resistant. Tethered float switch provides reliable automatic operation. 2900 GPH.
Imperial BM0110 Stove Pipe Superior Pump 92341 Sump Pumps Sta-Rite SR4800-01 Jet Pump Packages
Used to connect woodstove to entrance of chimney. 1/3HP split capacitor motor - high efficiency - low draw, rugged cast iron construction, 10' grounded water proof power cord, pumps up to 46 gallons per minute, 2760 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female pipe discharge thread. Stainless steel impeller. Three year warranty from Superior Pump Co. 4" single pipe deep well jet kit. Use with convertible jet pumps for 4" deep well applications. For applications up to 110 feet depth to water.
Simmons 0 Well Point Imperial BM0111 Stove Pipe Superior Pump 92572 Submersible Sump Pumps
Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Used to connect woodstove to entrance of chimney. 1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, corrosion resistant plastic, 10' grounded waterproof power cord, pumps up to 55 gallons per minute, 3300 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2 female iron pipe discharge thread. Stainless steel impeller. Three year warranty from Superior Pump Co.
PUMP PLASTIC PEDESTAL 1/2HP   Flotec FPZS33T Submersible Sump Pump With Tethered Float Switch Simer 2957 Submersible Sump Pump With Vertical Side Switch
Thermoplastic base, fully adjustable automatic switch, non-corrosive steel drive shaft. Metal switch arm for strength and durability. 1-1/2" discharge for high capacity pumping. For use in sump basins 12" or larger.10' cord, stainless steel impeller. 3.06 amp. Pumps up to 60gpm/3600gph. 1year warranty from Superior Pump. Durable thermoplastic construction for corrosion resistance.  Heavy-duty motor with automatic thermal overload protection.  Automatic tethered switch designed for minimum 14" diameter sump basin. 1/3 HP Pumps up to 3600 GPH. 1/2 HP pumps up to 4200 GPH. 1-1/2" discharge and 8' grounded power cord.  Piggy-back style switch for automatic or manual operation.  CSA certified. Durable thermoplastic resists corrosion.  Automatic operation, designed for minimum 10" sump basins.  Pumps up to3600 GPH.  Powerful motor with automatic thermal overload protection.  1-1/2" discharge, and 8' power cord.  Self-cleaning screen - reduces maintenance.  CSA certified.
Superior Pump 92501 Sump Pumps PED PUMP 1/2 HP SS/CAST IRON  Simer 2955 Submersible Sump Pump With Tethered Switch
1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded waterproof power cord, pumps up to 70 gallons per minute, 4200 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 1/2" solids, 1-1/2" female iron pipe discharge thread. Three year warranty from Superior Pump Co. Cast iron base, fully adjustable automatic switch, metal switch arm, for use with sump basins 12" or larger, 1-1/2" discharge, non-corrosive stainless steel drive shaft, impeller and float ball. Will handle liquids up to 180 deg F. 10' cord. 3.06 amps. Durable thermoplastic resists corrosion.  Automatic operation, designed for minimum 14" sump basins. Pumps up to  3600 GPH.  Powerful motor with automatic thermal overload protection.  1-1/2" discharge, and 8' power cord.  Self-cleaning screen - reduces maintenance.  CSA certified.
PUMP SUMP 1/2HP CAST IRON     Simer 2975PC Submersible Sump Pump With Tethered Float Switch Wayne SPF33 Submersible Sump Pumps
Continuous duty, thermally protected - split capacitor motor. Pumps will lift water up to 25' of vertical height. Large 1-1/2" discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 4.9 AMP, 10' cord, stainless steel impeller. Pumps up to 55 gpm/3300 gph. 3 year warranty from Superior Pump. Automatic submersible sump pump.  Maximum pumping capacity to 4200 GPH.  Rugged thermoplastic body resists corrosion, impact, stress, and heat.  Tethered float switch designed for minimum 14" diameter sump basin. 1-1/2" NPT discharge, coupling included.  Easy installation, replaced pedestal or submersible sump pumps.  CSA certified. 1/3 HP coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion resistant, thermoplastic pump base. Fully submersible. 1/3 HP; max flow rate is 3600 GPH at 0 ft. 1 1/2 NPT discharge. For use in 11 in. diameter or larger sump basins.
HEATER 10K BTU LP GAS 2PLAQUE HEATER 10K BTU LP BLUE FLAME  Imperial BM0112 Stove Pipe
Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. Unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), Legs and wall mounting hardware included. *NOT APPROVED for CANADA* Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. It can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide years of comfortable and safe heat. *NOT APPROVED for CANADA* Used to connect woodstove to entrance of chimney.
Superior Pump 92372RTG-P Ready To Go PUMP SUMP 1/3HP HI-FLOW CAST  Selkirk DoubleWall Telescopic Length Stove Pipe 6 in ID
Thermoplastic construction, continuous duty, thermally protected, split capacitor motor, will lift water up to 25' of vertical height,1-1/2 discharge, 4.1 amps, 10' cord. 3/8" solids handling, pump is mounted to base to prevent clogging and switch malfunction. Vertical float switch, pre-plumbed with check valve and discharge pipe. 1 year warranty from Superior Pump. Continuous duty, thermally protected - split capacitor motor. Pumps will lift water up to 25' of vertical height. Rugged cast iron construction. Large 1-1/2" discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 10 ft cord, handles up to 1/2" solids, 7.6 amp, Pumps up to 60 gpm/3600 gph.3 year warranty from Superior Pump. Includes finishing band. Easily removable for inspection and cleaning. Eliminates the need to cut pipe. For installed length, subtract 1-3/8" per joint. Adjustable 38" to 68" length.
Imperial BM0113 Stove Pipe Flotec FPSC3350A Submersible Sump Pump Sta-Rite VIP4D02 Submersible Pump Control Box
Used to connect woodstove to entrance of chimney. Handles up to 1/2" solids, clog resistant discharge, heavy-duty integrated vertical switch, 3360 gph maximum capacity, 1-1/2" NPT discharge pipe, 10' cord. U.L. Listed (Pump Accessory 344X).  Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring.
SUMP P PUMP 1/2 HP SS/CAST    Wayne CDU Submersible Sump Pump PUMP LAWN PORT 1HP STAINLESS
SUMP P PUMP 1/2 HP SS/CAST
Our Price: $155.31
Continuous duty, thermally protected - split capacitor motor. Will lift water up to 25' of vertical height,. Cast iron construction. Large 1-1/2" discharge. Can be used as a utility pump by removing float switch. 4.9 amps, 10' cord, side discharge, handles 3/8" solids, stainless steel impeller. 1/3 HP cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron pump base. Fully submersible. 1/3 HP; max flow rate is 3800 GPH at 0 ft. 1 1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins; 9 in. ON level and 4 in. OFF level. Powerful 1 HP fan cooled, 115 volt motor. Corrosion resistant stainless steel housing. Integral carry handle for portability. Convenient on/off switch. 1? NPT Suction and discharge. 165? total dynamic head. Pressure up to 72 psi. Garden hose adapters included.B 115v, 5.2 AMP, 72 psi maximum pressure, 830 gph max flow rate, 1 year warranty from Superior Pump.
Wayne SPF50 Submersible Sump Pumps Sta-Rite Industries VIP4F02 Submersible Pump Control Boxes Little Giant 5.5 ASP Submersible Sump Pump
1/2 HP coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion resistant, thermoplastic pump base. Fully submersible. 1/2 HP; max flow rate is 3900 at 0 ft. 1 1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins. U.L. Listed (Pump Accessory 344X).  Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring. 5.5-ASP automatic sump pump is for residential and light commercial use. 1-1/4" FNPT outlet with a garden hose adapter. 25' shutoff and corrosion-resistant zinc alloy housing. Integral snap-action float switch. Automatic operation has 7"-10" "ON" level range and 2"-5" "OFF" level range. Thermally protected. 3/8" solid handling capacity. Corrosion resistant polycarbonate switch housing/cover. Double seal on switch lever arm. Dynamically designed float to assure proper switch operation. Nylon impeller with no-clog design. Glass-filled polypropylene volute and base. Oil-filled motor housing. Screened inlet. CSA listed.
Wayne CDU800 Submersible Sump Pumps Flotec FPZT7350 High Output Submersible Sump Pump Superior Pump 92511 Submersible Sump Pumps
1/2 HP cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron base. Fully submersible. 1/2 HP; max flow rate is 4200 GPH at 0 ft. 1 1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins. 9 in. ON level and 4 in. OFF level. Rugged stainless steel and zinc construction.  Heavy-duty high efficiency motor.  Piggy-back style switch for automatic or manual operation, for minimum 10" sump diameter.  Pumps up to 6000 GPH.  8' grounded power cord.  1-1/2" NPT discharge. CSA Certified. Continuous duty thermally protected split capacitor motor, lifts water up to 25' of vertical height, cast iron construction, 1-1/2" discharge, 7.6 amp, 10' cord. Vertical float switch, side discharge, three year warranty, pumps up to 70 gallons per minute, 4200 gallons per hour.
Flotec FPZS50T Submersible Sump Pump With Tethered Float Switch Flotec FPZT7450 High Output Submersible Sump Pump PUMP SHALLOW WELL CAST 1/2HP
Durable thermoplastic construction for corrosion resistance.  Heavy-duty motor with automatic thermal overload protection.  Automatic tethered switch designed for minimum 14" diameter sump basin. 1/3 HP Pumps up to 3600 GPH. 1/2 HP pumps up to 4200 GPH. 1-1/2" discharge and 8' grounded power cord.  Piggy-back style switch for automatic or manual operation.  CSA certified. Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10" sump diameter. Pumps up to 6360 GPH. 8' grounded power cord. 1-1/2" NPT discharge. CSA Certified. Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. 1-1/4 NPT suction, 1" discharge/ drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump.
Flotec FPZT7550 High Output Submersible Sump Pump HEATER 18K BTU LP GAS 3PLAQUE HEATER 20K BTU LP BLUE FLAME
Corrosion resistant zinc construction, dissipates heat quickly and extends motor life, unibody motor housing eliminates leak points, stainless steel fasteners, quadra seal technology provides superior motor protection, smooth flow hydraulics delivers superior performance, vertical float switch operates in a 10? or larger sump basin, pumps up to 6660 gph  maximum lift of 29?. Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. Unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), Legs and wall mounting hardware included. *NOT APPROVED for CANADA* Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. It can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide years of comfortable and safe heat. *NOT APPROVED for CANADA*
Superior Pump 92751 Sump Pump Wayne ESP15 Pump System Wayne CDU980E Submersible Sump Pumps
Continuous duty, thermally protected - split capacitor motor, lifts water up to 25' vertical height, rugged stainless steel and cast iron construction, 2" discharge for high capacity pumping, 1-1/2" NPT adapter included, clog resistant thermoplastic vortex impeller. Can be used as a utility pump by removing the float switch. Pumps up to 80 gpm - 4800 gph, handles 1/2" solids, 3 year warranty from Superior Pump. 12-volt reinforced thermoplastic battery back-up system. Assembled in the US with foreign and domestic parts. Audible alarm and LED indicator light informs the homeowner when the back-up system has been activated. Back-up sump pump has corrosion resistant, sealed thermoplastic construction. Back-up pumps max flow is 1750 GPH at 0 ft. 3/4 HP cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Stainless steel motor housing and rugged, cast iron pump base. Fully submersible. 3/4 HP; max flow rate is 4600 GPH at 0 ft. 1 1/12 in. NPT discharge. For use in 11 in. diameter or larger sump basins. 9 in. ON level and 4 in. OFF level.
Flotec E50VLT Professional Submersible Sump Pump Superior Pump 92900 Battery Back Up Kit PUMP CONVERTIBL WELL CAST1/2HP
Vertical switch, 115V, 10' cord, CSA and CUS listed, energy-efficient PSC motor, rust-proof impeller, 1-1/2" FNPT discharge pipe, 3/8" maximum solid handling. 12V DC pump with tethered float switch and mounting hardware, alarm/control unit with fuse and mute feature, thermoplastic battery box, 2 amp AC charger with 10? power cord. 1-1/4" or 1-1/2" discharge size. Battery sold separately. 1 year warranty from Superior Pump. Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications.  1-1/4" NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1" discharge/ drive port.Deep well conversion assembly included. 6.4/3.2 amps. 1 year warranty from Superior Pump.
Flotec E75VLT Professional Submersible Sump Pump HEATER 30K BTU LP GAS 5PLAQUE HEATER 30K BTU LP BLUE FLAME
Vertical switch, 115V, 10' cord, CSA and CUS listed, energy-efficient PSC motor, rust-proof impeller, 1-1/2" FNPT discharge pipe, 3/8" maximum solid handling. Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. Unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), Legs and wall mounting hardware included. *NOT APPROVED for CANADA* Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. It can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide years of comfortable and safe heat. *NOT APPROVED for CANADA*
PUMP JET SHALLOW WELL 3/4HP   Sta-Rite Industries FP4012-10 Flotec Simer 2825SS Non-Submersible Utility Pump
3/4 HP dual voltage motor (115/230v).  Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate.  Pre-mounted, fully adjustable pressure switch.For shallow well applications up to 25' depth. 7.8/3.9 amps, 1-1/4 NPT suction, 1" discharge/dirive port, 20/40 pressure switch, 74 psi max pressure, 13.75 gpm max flow rate. 1 year warranty from superior Pump. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats, and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gallons per minute. Pressures to 80 PSI, suction lifts to 20'. Continuous duty rated, 1 HP, 115V motor. Stainless steel pump housing with excellent self-priming capability. 1" threaded suction and discharge, garden hose fitting and 6' power cord included.
Sta-Rite Industries FP4212-08 Flotec Sta-Rite Industries FP4022-08 Flotec PUMP JET CONV W/EJECT KIT 1HP
Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. 1 HP dual voltage motor (115/230v). Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications. 10/5 amps, 115/230 volt, 1-1/4" NPT suction, 71 psi max pressure, 13.2 gpm max flow rate. 1 year warranty from Superior Pump.
Wayne Pumps CWS50 Deep Well Jet Pumps Franklin Electric RJC-50 Red Lion Sta-Rite FSNCH-L Sta-Rite
1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately). Ideal for use in shallow well (less than 25') and deep well (25' to 90') applications. Cast iron pump housing for heavy duty applications. 115/230 volt heavy-duty motor with voltage selector for simple connection to existing power source. Includes factory pre-wired 30/50 pressure switch that produces up to 76 PSI with automatic shut-off. 11 GPM. Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dust-proof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4" NPT suction and 3/4" NPT discharge. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. CSA certified.
Sta-Rite Industries FP4222-08 Flotec Sta-Rite Industries FP4032 Flotec Wayne Pumps CWS75 Deep Well Jet Pumps
Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. 1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
Wayne ESP25 Sump Pump System Franklin Electric RJC-75 Red Lion Sta-Rite Industries FP5172-08 Flotec
PUMP SPRINKLER 1.5HP
Our Price: $302.24
12-volt reinforced thermoplastic battery back-up system. Assembled in the US with foreign and domestic parts. Audible alarm and LED indicator lights informs the homeowner when the back-up system is running. Back-up sump pump has corrosion resistant, sealed thermoplastic construction. Back-up pumps max flow is 3300 GPH at 0 ft. Designed for easy installation. Ideal for use in shallow well (less than 25') and deep well (25' to 90') applications.  For heavy duty applications.  115/230 volt heavy-duty motor with voltage selector for simple connection to existing power source.  Produces up to 71 PSI with automatic shut-off.  Cast iron pump housing.  Includes factor pre-wire 30/50 pressure switch.  18 GPM. Fiberglass reinforced thermoplastic pump housing for the highest corrosion resistance. Superior performance at depths to water of 20' or less. Ready to install 230 volt, heavy-duty motor. Self-priming after pump housing is initially filled, protects against overheating. 1-1/2 HP pumps up to 67 gallons per minute. 2 HP pumps up to 69 gallons per minute. CSA certified.
Franklin Electric RL12G05-3W2V Red Lion Sta-Rite FSNDH Sta-Rite Wayne WSS20V Sump Pumps
4" submersible deep well pump. Powered by a 3-wire, 230 volt industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box. Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winterizing. Pump primes faster and handles more air with a multi-port, precision-molded, reinforced polypropylene diffuser. Motor windings feature insulation materials that protect against excessive moisture and contaminants. Heavy-duty ball bearings are sealed, permanently lubricated, and tested to ensure extended life and smooth quiet operation. Built-in jet features a high strength poly-carbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl impeller is precision molded for perfect balance, and is ultra smooth for highest performance and efficiency. Mechanical shaft seal is precision lapped and made of highly polished carbon-ceramic, stainless steel construction, with an internal design for continuous water lubrication. Balanced rotor is die cast under high pressures for uniform performance and greater efficiency. Pump and motor shaft are stainless steel for maximum corrosion resistance, with a one-piece threaded shaft for positive drive and alignment. Includes a dustproof cover to protect all electrical components from dirt, dusts, and insects. Pressure switch with adjustable cut-in and fixed differential (20 PSI). 115/230V 1/3 HP cast iron and 12-volt reinforced thermoplastic primary and secondary battery back-up system. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles (primary only). High flow, corrosion resistant, battery back-up pump with reliable reed float switch with battery box and charger. Pre-assembled and preset for quick installation. Primary pump has a max flow rate of 3800 GPH at 0 ft. Back-up pump has a max flow rate of 1750 GPH at 0 ft.
Franklin Electric RL12G05-2W1V Red Lion Franklin Electric RL12G05-2W2V Red Lion Franklin Electric RLSP-200 Red Lion
4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. Ideal for use in underground or above ground lawn sprinkling systems, garden irrigation, boosting household water pressure, and recirculation of large volumes of water. Heavy-duty cast iron pump housing engineered for high-efficiency. 115/230 volt heavy duty motor with voltage selector allows for simple connection to existing power source. Self-priming design - after initial fill, no additional priming required during operation. 89 GPM.
Sta-Rite Industries SLC-L Sta-Rite Pro Jet Superior Pump 92941 Pre-Assembled Battery Back Up Kit Sta-Rite Industries FP2211 Flotec
The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models. The ProJet SL convertible jets utilize easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages. Close-grained cast iron construction. Reinforced polypropylene diffuser with brass wear ring. One-piece threaded stainless steel shaft. High quality pressure switch with adjustable cut-in pressure settings. CSA certified. Primary pump 92341 features: 1/3 HP 120 volt 4.1 amp AC motor, tough cast iron construction, 1-1/2" NPT discharge, vertical float switch, 10' power cord, clog resistant stainless steel impeller. Battery pump features: 12 volt DC pump, tough thermoplastic construction, 1-1/4" or 1-1/2" NPT discharge, vertical float switch, clog resistant impeller. Battery backup kit features:  87 decibel alarm with mute, electronic control panel with indicator lights and fuse, thermoplastic battery box, 2 amp AC charger with power cord, battery terminals and two universal check valves included. 12 Volt deep cycle battery sold separately. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified.
Sta-Rite Industries FP2212 Flotec Sta-Rite 3075SS Simer - Ace In The Hole Wayne SWS50-8.5FX Pump And Precharged Tank System
For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. Total home water pressure booster system. 3/4 HP - maximum pumping capacity to 24 GPM. Maximum additional pressure - 40 PSI. Fully automatic system increases and maintains household water pressure - enjoy better showers, cleaning, sprinkling and more. Assemble, ready to install. Includes 6' 115V power cord. 1" female NPT intake and 1" male NPT discharge pipes. CSA certified. 1/2 HP cast iron shallow well jet pump precharged tank system (includes SWS50). Assembled in the US with foreign and domestic parts. 3/4 in NPT discharge with 1 1/4 in. suction. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Max flow rate is 420 GPH at 0 ft. (50 PSI). Durable cast iron volute with dedicated priming port.
Franklin Electric RL12G07-2W2V Red Lion Franklin Electric RL12G07-3W2V Red Lion Franklin Electric RL12G10-2W2V Red Lion
4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 4" submersible deep well pump. Powered by a 3-wire, 230 volt industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Sta-Rite SLE-1 Sta-Rite Pro Jet Sta-Rite Industries FP2232 Flotec Sta-Rite Industries FP2222 Flotec
The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models. The ProJet SL convertible jets utilize easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages. Close-grained cast iron construction. Reinforced polypropylene diffuser with brass wear ring. One-piece threaded stainless steel shaft. High quality pressure switch with adjustable cut-in pressure settings. CSA certified. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified.
Sta-Rite Industries MSE Sta-Rite
The MS series vertical jet pumps are the industry standard deep well jet pumps for over-the-well "bolt-on" installations. The MS series jet pumps include the pre-plumbed external automatic regulator, pressure gauge, pressure switch, and a complete line of casing adapters to drive the 4" double pipe or 2" and 3" single pipe jet packages. Rugged cast iron body, stainless steel pump and motor shaft, and close-grained cast iron diffuser.
   
 
1