Home > HOUSEWARES > CLEANING SUPPLIES > CLEANING IMPLEMENTS > LUBRICANTS
Sort By:
1
Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Pro-Flex PFSP-0302 Pro-Flex Striker Plate Pro-Flex Floppy-Flex Protective Conduit
All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. Protective devices required where tubing passes through structural members. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Unger 960210 Squeegee Rubber Harvey's 044010 Epoxy Putty Harvey's 039300 Gas Leak Detectors
Natural molded double-sided rubber for streak-free results. Cut to size. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to +160 degrees Fahrenheit. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin.
Oatey 30999 ABS Cement Oatey 31012 PVC Cement Pro-Flex PFSP-0307 Pro-Flex Striker Plate
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Protective devices required where tubing passes through structural members.
Harvey's 018100-24 P-4 Oatey 30890 Rain-R-Shine Pro-Flex Floppy-Flex Protective Conduit
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Quickie 313-3/72 Homepro Shower Squeegees Oatey 30883 PVC Cement Harvey's 018400-24 PVC Cement
Angled for max performance cleaning shower doors, mirrors and windows. Comfort grip handle with convenient hang-up feature. 9-1/2" long. Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40-110 degrees. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty Oatey 31128 CPVC Pipe and Fitting Cement Harvey's 018450-24 P-6E
NSF rating, signifying it safe for contact with potable water. Works wet or dry. Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set; designed for use on all duct and conduit applications through 6" in diameter. Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified for use in potable water, sewer, drain, and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can.
Oatey 30818 All-Purpose Cement Harvey's 018500-24 A-6 Harvey's 044150-12 Epoxy Putty
Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Rectorseal 55902 PVC Cement Oatey 30850 PVC Cement WINDOW SQUEEGEE PLASTIC
Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers, and drain, waste and vent (DWV). For use on PVC pipe through 2" Schedule 40 pressure piping and up to and including 4" Schedule 40 non-pressure (DWV) piping; it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. White plastic with blue rubber ergonomic handle.
Harvey's 018110-24 P-4 Harvey's 018700-24 C-4 Harvey's 018200-24 P-2 PVC Cement
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Oatey 31129 CPVC Pipe and Fitting Cement Harvey's 018000-24 Mp-6 Oatey 30917 ABS Cement
Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings up to 6" in diameter. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. SALES AREA - ONLY IN THE WESTERN REGION.
Oatey 31013 PVC Cement Unger 961820 Total Reach Window Squeegees 12" SUCTION SUPER SQUEEGEE CLR
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. For windows, mirrors and auto glass. Cleans fast with less streaking. Comfort grip handle. Must be used with Unger pole and adapter. Squeegee with suction storage hook. Keeps glass dry and removes spots or streaks. Great for shower doors, windows, mirrors and more. Made of durable plastic. 12" length.
Oatey 31910 Flow-Guard Gold SCRAPER ERGO 4IN W/OVERMOLD   BLADE CARBON SCRAPER REFIL 5PK
Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. Use to remove leftover residue from windows, glass and more. Features coated carbon steel blades with a reversible razor edge. An integrated safety guard provides blade protection while a rubber grip helps prevent the scraper from slipping out of your hand for safer, more efficient work. Opens with the push of a button for quick blade replacement and cleaning. Replacement carbon coated blades for the Orgill SKU# 934.8574. Includes a carrying case to store and protect blades. Includes 5 replacement blades.
Rectorseal 55970 Abs/PVC/CPVC Cement Oatey Fix-It Epoxy Putty Oatey 30900 ABS/PVC Transition Cement
Medium body multipurpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2" Schedule 40 and non-pressure piping systems through 6" Schedule 40 (excluding Schedule 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. For sealing, patching and mending compound. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Perfect for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138.
Harvey's 018510-24 A-6 Brass Craft PSC1094L Gas Leak Detectors Unger 961830 Total Reach Window Squeegees
Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Used for natural, LP gas, mixed, manufactured, and LP gas-air mixtures. For windows, mirrors and auto glass. Cleans fast with less streaking. Comfort grip handle. Must be used with Unger pole and adapter.
Harvey's 018410-24 PVC Cement Harvey's 018210-24 P-12 PAD INDOOR REPLACEMENT
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Machine washable microfiber pads attract and hold dust, dirt, and allergens. Use with less cleaning solution, only 2-3 sprays are needed to clean multiple windows. Scrub bands remove stubborn dirt and grime. Works with all leading glass cleaners and natural cleaning solutions. Works with Orgill Sku# 7295892 SpeedClean Indoor Window Cleaner.
8IN SS WINDOW SQUEEGEE        Oatey 30821 All-Purpose Cement Unger 92150 Shower Squeegees
Stainless steel squeegee with natural molded double-sided rubber. Provides streak-free results. Attaches to Tele-Pole (Orgill SKU# 7027121 and 0249045). Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. For shower stalls, bathtubs, doors, tile, and grout. Easily removes water and soap scum. Width 10".
Oatey 31911 Flow-Guard Gold Oatey 30891 Rain-R-Shine Harvey's 018710-24 C-4 CPVC Cement
Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can.
Oatey 32161 Hot Blue Lava PVC Cement Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Harvey's 018010-24 Mp-6
Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can.
Harvey's 018120-12 P-4 Harvey's 018220-12 P-2 PVC Cement Oatey 30863 PVC Cement
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
Oatey 31094 PVC Cement 12" SS WINDOW SQUEEGEE        Pro-Flex PFBC-AB Pro-Flex Bonding Clamps
Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Stainless steel squeegee with natural molded double-sided rubber. Provides streak-free results. Attaches to Tele-Pole (Orgill SKU# 7027121 and 0249045). UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
WINDOW WASHER SQUEEGEE        16IN UNGER SS WINDOW SQUEEGEE Pro-Flex PFAP-3410 Pro-Flex Accessory Pack
Both a window washer and squeegee. The scrubber is extra sturdy and coarse; also with a cellulene sponge and rubber squeegee blade. 8" painted wood handle. Stainless steel squeegee with natural molded double-sided rubber. Provides streak-free results. Attaches to Tele-Pole (Orgill SKU# 7027121 and 0249045). Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components.
Oatey 30925 ABS/PVC Transition Cement SQUEEGEE RUBBER GRIP 12IN PRO Oatey 31014 PVC Cement
Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. Constructed of durable stainless steel and ergonomic rubber grip designed for comfort. Includes an extra rubber replacement blade. Attaches to a telescopic pole (not included) to reach high windows. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
Oatey 30812 Bonding Adhesive SQUEEGEE 12IN CLEAR/STAINSTEEL Oatey 32166 Hot Orange Lava
X-15 PVC bonding adhesive is formulated for use to join two sheets of PVC shower pan liner membrane together. Provides permanent, watertight seal to form larger membrane for use in tile shower or other concealed water-proofing applications. Use it to clean the mirrors, shower enclosures, window panes and even glass tabletops of streaks, stains, and dry water spots. 12" chrome blade. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846.
Pro-Flex PFMF-1212 Tube To Pipe Adapter Unger  RB10C Scraper Blades Unger 964810 Window Soft Wash Brush
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. 10 carbon steel blades per dispenser. Reversible: 1/2 sharp, 1/2 blunt blades. For 'ErgoTec, Brute' and Light Duty Scrapers. Replacement blade for Orgill SKU# 1678838. HydroPower soft brush with squeegee. Split tip brush is soft enough to clean vehicles, boats, windows or any surface without scratching, but removes built up dirt or grime. The built in squeegee allows you to remove water from the windows after cleaning so the water doesn't leave stains collected by the water during use. Attaches to Unger No. 964500, (SKU 322.9424) Water Flow Pole.
Harvey's 018720-12 C-4 CPVC Cement Unger 964500 Water Flow Pole Harvey's 018420-12 PVC Cement
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Pole attaches to standard water hose and has on/off switch at the end. Cushion grip allows secure handling if hands get wet. Can attach pole to Unger warehouse stocked specialty brushes; No.960010 Glass Brush, (SKU) 136.1930, No. 964810 Soft Wash Brush with Squeegee, (SKU) 595.7378 and No. 964820, Bi-Level Brush, (SKU) 036.9439. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
SQUEEGEE RUBBER GRIP 16IN PRO Harvey's 018020-12 Mp-6 Oatey 30834 All-Purpose Cement
Constructed of durable stainless steel and ergonomic rubber grip designed for comfort. Includes an extra rubber replacement blade. Attaches to a telescopic pole (not included) to reach high windows. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Pro-Flex PFFN-1212 Tube To Pipe Adapter Oatey 30902 ABS Cement Harvey's 018320-12 PVC Cement
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Fast setting, all-weather, medium bodied PVC solvent cement specifically recommended for cold weather and fast setting pressure applications. Recommended for pressure pipe: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Formulated for fast initial set up at temperatures down to 10 degrees fahrenheit. Effective temperature range -15 degrees to 110 degrees fahrenheit. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 30876 PVC Cement Oatey 31121 PVC Cement Oatey 31132 PVC Cement
Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Medium-bodied clear cement for use on PVC pipe and fittings. Up to 6" diameter. Formulated for fast initial set-up at temperatures down to -15 degrees F to 100 degrees F. schedule 40 and schedule 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit, and DWV. Non-pressure, DWV, up through 4" diameter: no primer needed where local codes permit. Meets ASTM D-2564.
Oatey 30893 Rain-R-Shine Oatey 31095 PVC Cement 10" COMBO SQUEEGEE/SCRUBBER
Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Use to clean windows. For commercial or residential use. 2-in-1 tool with squeegee on one side and scrubber on the other. Attaches to a telescopic pole (not included) for extended reach.
CLEANER WINDOW INDOOR         Oatey 31015 PVC Cement Pro-Flex PFMF-3406 Tube To Pipe Adapter
Designed to clean windows. A replaceable microfiber pad attracts and holds dust, dirt, and pollen. Use with less cleaning solution, only 2-3 sprays are needed to clean multiple windows. Machine washable microfiber pad attracts and holds dust and dirt. Works with all leading glass cleaners and natural cleaning solutions. Attaches to telescopic pole (not included) for hard to reach windows. Use with Orgill Sku# 7295801 replacement pad. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Harvey's 018130-12 P-4 Pro-Flex PFFN-3406 Tube To Pipe Adapter Harvey's 018230-12 P-12
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps Harvey's 018030-12 Mp-6 Oatey 32162 Hot Blue Lava PVC Cement
UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564.
SQUEEGEE SWIVEL PRO 18 INCH   Oatey 31105 PVC Cement Oatey 30894 Rain-R-Shine
Features a handle that pivots 180-degrees or locks in place at the touch of a button. Designed to clean arched and bay window. Constructed of durable stainless steel, includes a professional quality rubber blade for streak-free results. The ergonomic grip allows for comfort and control. Attaches to a telescopic pole (not included) for hard-to-reach window cleaning without a ladder. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit.
Oatey 31008 PVC Cement Unger 961870 Window Squeegee/Scrubber Unger PR300 Window Squeegees
Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Use to clean windows. For commercial or residential use. 2-in-1 tool with squeegee on one side and scrubber on the other. Attaches to a telescopic pole (not included) for extended reach. Stainless steel squeegee with ergonomic rubber grip. Complete with "S" channel and ErgoTec soft rubber. Non-slip rubber grip ideal for all weather conditions. Features a fast lock for quick channel changes. Fits onto all Unger poles.
Harvey's 018430-12 PVC Cement Oatey 31122 PVC Cement Oatey 32167 Hot Orange Lava
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846.
Unger  SH00C Ergo Tech Scraper Scrapers Quickie 004 Homepro Window Squeegee/Scrubber Oatey 30847 All-Purpose Cement
Tempered carbon steel blade has blunt edge for cement or stucco work. A razor edge for scraping paint and tape. Handle easily attaches to all Unger poles. Ergonomic grip. A telescopic window washer and squeegee. The powder-coated steel handle extends to 90". The sponge is 12" and cellulene. The squeegee blade is rubber. There is a 10 year limited warranty on this item. However, a replacement head is not available. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Unger PR450 Pro Squeegee Pro-Flex PFST-12 Pro-Flex Termination Plates Pro-Flex PFTE-BBB6 Tube Tee
Made of stainless steel, the 'PRO' is lighter and stronger than brass. Features a 'Fast-Lock' handle for quick blade and channel changes. Non-slip rubber grip handle is comfortable in all weather conditions. Coin adjustable screws hold the channel at desired tension. Cleans any flat, smooth surface. Handle can be used with TRIM10SCRAPER. Includes 'S' Channel and complete with Unger soft rubber blade. Attaches to all Unger poles with a press fit. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing.
Pro-Flex PFMN-CCB 4-Port Pipe Manifold Pro-Flex PFMN-BBB 4-Port Pipe Manifold Pro-Flex PFST-34 Pro-Flex Termination Plates
Each manifold has 4 1/2" female (FIP) branches. Each manifold has 4 1/2" female (FIP) branches. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Lundmark Wax SOL9105W.7 Bees Wax Lubricant Pro-Flex PFTE-CCB6 Tube Tee Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit
For wood screws, sliding drawers, candle making, etc. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Includes: 25 ft. 1/2"  CSST flexible gas piping, one 1/2"  brass male fitting, one 1/2" special termination plate with male fittings, 1/2" MIP x 1/2" FIP ball valve connector - 24" long, 1/2" flare x 3/8" MIP union fitting, spool of yellow teflon tape, bottle leak detector, bonding clamp, installation/training guide and fitting assembly sheet.
   
 
1