Home > HOUSEWARES > CLEANING SUPPLIES > CLEANING IMPLEMENTS > COMMERCIAL FLOOR
Choose a sub category:
KEROSENE HEATERS-CONVECT/RADIA KEROSENE HEATER ACCESSORIES KEROSENE FUEL
OIL HEATER ACCESSORIES PORTABLE ELECTRIC HEATERS ELECTRIC WALL & CEILING HEATER
GAS HEATERS - NAT GAS HEATERS - LP GAS HEATERS - DUAL FUEL
GAS HEATER ACCESSORIES PROPANE HEATERS TORPEDO HEATERS
OUTDOOR & PATIO HEATERS UTILITY HEATER PARTS & ACC RADIATOR VALVES
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape Harvey's 017117B Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Plumb Pak 04151 Pipe Thread Seal Tape Plumb Pak PP20855100 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe For use on plumbing threads to prevent leaking. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Harvey's 043010 Plumbers Putty Harvey's 017252-144 Pipe Thread Seal Tape Oatey 31166 Plumbers Putty
Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.
Sta Put 25101 Non-Mastic Plumbers Putty Unger 960210 Squeegee Rubber TAPE SEAL PTFE 1X520
Molds easily, and will not harden, crumble, crack or shrink. A flexible, stretchable compound for professional use in setting bowls, fixtures, faucets, basin cocks, strainers, plugs, sink frames and all other sealing and caulking applications. Provides a watertight seal. Will not stick to hands. Excellent low temperature properties. Meets Fed. Spec. A-A-3110 (formerly TT-P-1536A). Not for use on porous surfaces. Natural molded double-sided rubber for streak-free results. Cut to size. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Harvey's 017165-144 Pipe Thread Seal Tape Oatey 31403 Gas Line Thread Tape Oatey 31402D Water Line Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton.
Harvey's 017065 Pipe Thread Seal Tape Quickie 313-3/72 Homepro Shower Squeegees Oatey 31177 Stain-Free Plumbers Putty
Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed. Angled for max performance cleaning shower doors, mirrors and windows. Comfort grip handle with convenient hang-up feature. 9-1/2" long. Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.
BAND CHIMNEY UNIVERSAL DSP    WINDOW SQUEEGEE PLASTIC       Harvey's 043050 Plumbers Putty
Used to conceal the crimped end on the last length in the system. White plastic with blue rubber ergonomic handle. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands.
Unger 961820 Total Reach Window Squeegees 12" SUCTION SUPER SQUEEGEE CLR Unger 961830 Total Reach Window Squeegees
For windows, mirrors and auto glass. Cleans fast with less streaking. Comfort grip handle. Must be used with Unger pole and adapter. Squeegee with suction storage hook. Keeps glass dry and removes spots or streaks. Great for shower doors, windows, mirrors and more. Made of durable plastic. 12" length. For windows, mirrors and auto glass. Cleans fast with less streaking. Comfort grip handle. Must be used with Unger pole and adapter.
PAD INDOOR REPLACEMENT        8IN SS WINDOW SQUEEGEE        Ameri-Vent 8RSC Double Wall Round Storm Collar
Machine washable microfiber pads attract and hold dust, dirt, and allergens. Use with less cleaning solution, only 2-3 sprays are needed to clean multiple windows. Scrub bands remove stubborn dirt and grime. Works with all leading glass cleaners and natural cleaning solutions. Works with Orgill Sku# 7295892 SpeedClean Indoor Window Cleaner. Stainless steel squeegee with natural molded double-sided rubber. Provides streak-free results. Attaches to Tele-Pole (Orgill SKU# 7027121 and 0249045). Use with HS chimney roof flashing to insure water tight installation.
Harvey's 043105 Plumbers Putty Unger 92150 Shower Squeegees Imperial BM0047 Stove Pipe Starter Joint
Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands. For shower stalls, bathtubs, doors, tile, and grout. Easily removes water and soap scum. Width 10". Used to connect two non-crimped ends of pipe together. Crimped on both ends.
Imperial BM0095 Trim Stove Pipe Collar Imperial BM0093 Trim Stove Pipe Collar Imperial BM0094 Trim Stove Pipe Collar
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Imperial BM0096 Trim Stove Pipe Collar Imperial BM0026 Adjustable Flue Stopper 12" SS WINDOW SQUEEGEE
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Used to cover existing flue hole. Adjustable anchors keep stopper securely in place. Stainless steel squeegee with natural molded double-sided rubber. Provides streak-free results. Attaches to Tele-Pole (Orgill SKU# 7027121 and 0249045).
16IN UNGER SS WINDOW SQUEEGEE SQUEEGEE RUBBER GRIP 12IN PRO WINDOW WASHER SQUEEGEE
Stainless steel squeegee with natural molded double-sided rubber. Provides streak-free results. Attaches to Tele-Pole (Orgill SKU# 7027121 and 0249045). Constructed of durable stainless steel and ergonomic rubber grip designed for comfort. Includes an extra rubber replacement blade. Attaches to a telescopic pole (not included) to reach high windows. Both a window washer and squeegee. The scrubber is extra sturdy and coarse; also with a cellulene sponge and rubber squeegee blade. 8" painted wood handle.
Imperial BM0151 Clean Out Crimped Stove Pipe Plug Imperial BM0049 Stove Pipe Starter Joint SQUEEGEE 12IN CLEAR/STAINSTEEL
Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection. Used to connect two non-crimped ends of pipe together. Crimped on both ends. Use it to clean the mirrors, shower enclosures, window panes and even glass tabletops of streaks, stains, and dry water spots. 12" chrome blade.
Ultra Temp 208450 Type A Locking Band Unger 964810 Window Soft Wash Brush Unger 964500 Water Flow Pole
Ultra Temp Locking Band, Type A, Stainless Steel, 8 in Width, For use with Chimney Pipe HydroPower soft brush with squeegee. Split tip brush is soft enough to clean vehicles, boats, windows or any surface without scratching, but removes built up dirt or grime. The built in squeegee allows you to remove water from the windows after cleaning so the water doesn't leave stains collected by the water during use. Attaches to Unger No. 964500, (SKU 322.9424) Water Flow Pole. Pole attaches to standard water hose and has on/off switch at the end. Cushion grip allows secure handling if hands get wet. Can attach pole to Unger warehouse stocked specialty brushes; No.960010 Glass Brush, (SKU) 136.1930, No. 964810 Soft Wash Brush with Squeegee, (SKU) 595.7378 and No. 964820, Bi-Level Brush, (SKU) 036.9439.
SQUEEGEE RUBBER GRIP 16IN PRO Oatey 34055 Plumbing Access Panel Selkirk 206810 Storm Collar
Constructed of durable stainless steel and ergonomic rubber grip designed for comfort. Includes an extra rubber replacement blade. Attaches to a telescopic pole (not included) to reach high windows. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with plastic sealer to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning.
Imperial BM0039 Stove Pipe Reducer Oatey 34045 Plumbing Access Panel Plumb Pak PP855-1 Pipe Thread Seal Tape
Connect oval stove opening with round pipe. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. For use on plumbing threads to prevent leaking.
Selkirk 208810 Storm Collar Imperial BM0153 Clean Out Crimped Stove Pipe Plug Imperial BM0013 Adjustable Stove Pipe Elbow
Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with plastic sealer to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning. Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection. Adjustable from 0 to 90 degrees.
Imperial BM0030 Clean Out Stove Pipe Cap 10" COMBO SQUEEGEE/SCRUBBER   Fluidmaster AP0808 Access Panels
Closes off one crimped end of an assembled tee or flue pipe. Aids in cleaning and inspection. Use to clean windows. For commercial or residential use. 2-in-1 tool with squeegee on one side and scrubber on the other. Attaches to a telescopic pole (not included) for extended reach. Easy to install, no framing required, works in walls and ceilings up to 3/4" thick, pops in and out of position, no visible clamps or screws. Great for spa pumps, security systems, computer-audio-tv cables.
CLEANER WINDOW INDOOR         Chickasaw /Little Rock Broom Works 628 Wet Floor Signs Unger 963920 Window Scrubbers
Designed to clean windows. A replaceable microfiber pad attracts and holds dust, dirt, and pollen. Use with less cleaning solution, only 2-3 sprays are needed to clean multiple windows. Machine washable microfiber pad attracts and holds dust and dirt. Works with all leading glass cleaners and natural cleaning solutions. Attaches to telescopic pole (not included) for hard to reach windows. Use with Orgill Sku# 7295801 replacement pad. Lightweight. Message printed on both sides, "CAUTION WET FLOOR" and "PISO MOJADO". 8" by 2" on top of sign and 24" long. Plush, machine-washable synthetic fabric with reinforced zigzag stitched ends ensures long life. Machine washable fabric. For cleaning screens, dusting, and wood polishing.
Oatey 34056 Plumbing Access Panel Plumb Pak PP855-100 Pipe Thread Seal Tape Rubbermaid 6112 00 YEL Floor Signs
Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. For use on plumbing threads to prevent leaking. Lightweight and versatile, injection-molded. Makes a heavy statement about safety. Warning message printed in English, French, German, and Spanish for effective communication to broad audiences. Folding design for convenient storage or transport on janitors cart. 26-1/2"H x 11"W x 1-1/2"D when closed, 25"H x 11"W x 12"D open. Yellow.
Selkirk 206480 Finishing Collar GLOVES FIREPLACE COWHIDE LTHR Imperial BM0074 Stove Pipe Reducer
Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee. Made of genuine cowhide leather. Cuff extends above the wrist for superior protection, for safety and comfort. Universal size. Imperial Stove Pipe Reducer, Series: 611, 6 X 4 in Nominal, Small End Crimped End, 24 ga Thickness, Black
AmeriVent 6SWA Single Wall Adapter FLOOR SIGN CAUTION YELLOW     Imperial BM0075 Stove Pipe Reducer
Included in ceiling support assembly, roof support assembly and tee assembly. Folding design for convenient storage or transport on Janitor Cart. Caution and closed warning messages imprinted in English, French, and Spanish for effective communication to broad audiences. Narrow body and unique plastic arm allow non-obstructive placement in a variety of locations. Durable plastic construction will not rust, corrode or fade. Meets OSHA requirements. ANSI compliant multi-lingual graphics warn of nearby hazardous area. Flexible locking-style hanger makes sign stationary and visible from all directions. 25" (63.5 cm) model for use in narrow areas. Imperial Stove Pipe Reducer, Series: 611, 6 X 5 in Nominal, Small End Crimped End, 24 ga Thickness, Black
SCRUBBER 18 INCH PRO          SQUEEGEE SWIVEL PRO 18 INCH   Imperial BM0077 Stove Pipe Reducer
Cleans windows gently, but effectively. Features an integrated scrub zone, a non-abrasive pad that provides extra cleaning power. The ergonomic grip allows for comfort and control. Professional quality scrubbing power for windows. Microfiber sleeve holds water for effective cleaning. Ergonomic handle attaches to telescopic pole (not included) for extended reach. Features a handle that pivots 180-degrees or locks in place at the touch of a button. Designed to clean arched and bay window. Constructed of durable stainless steel, includes a professional quality rubber blade for streak-free results. The ergonomic grip allows for comfort and control. Attaches to a telescopic pole (not included) for hard-to-reach window cleaning without a ladder. Imperial Stove Pipe Reducer, Series: 611, 7 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black
Sure-Temp 206791 Spark Arrestor Imperial BM0079 Stove Pipe Reducer Unger 961870 Window Squeegee/Scrubber
Diamond shaped 1/2" x 1" mesh, 18-8 stainless steel. Fits same size round chimney top. Keeps foreign objects out of chimney. Imperial Stove Pipe Reducer, Series: 611, 8 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black Use to clean windows. For commercial or residential use. 2-in-1 tool with squeegee on one side and scrubber on the other. Attaches to a telescopic pole (not included) for extended reach.
Homebasix CPA03110MM3L Adult Hearth Fireplace Gloves Imperial BM0080 Stove Pipe Reducer Selkirk 208480 Finishing Collar
16" Pigskin gloves. Imperial Stove Pipe Reducer, Series: 611, 8 X 7 in Nominal, Small End Crimped End, 24 ga Thickness, Black Round collar fits lower end of suspended insulated chimney pipe to provide finished appearance. Used to attach T-DSA Smoke Pipe Adapter to lower end of chimney or to insulated Tee.
Fluidmaster AP1414 Access Panels Imperial BM0062 Stove Pipe Increaser Unger PR300 Window Squeegees
Easy to install, no framing required, works in walls and ceilings up to 3/4" thick, pops in and out of position, no visible clamps or screws. Great for spa pumps, security systems, computer-audio-tv cables. Ecco Flue Pipe Increaser, 6 x 8 in Nominal, Crimped End, 24 ga Thickness, Matte, Black Stainless steel squeegee with ergonomic rubber grip. Complete with "S" channel and ErgoTec soft rubber. Non-slip rubber grip ideal for all weather conditions. Features a fast lock for quick channel changes. Fits onto all Unger poles.
AmeriVent 8SWA Single Wall Adapter Imperial BM0061 Stove Pipe Increaser STRIPPING PAD FLR MACHINE 13IN
Included in ceiling support assembly, roof support assembly and tee assembly. Ecco Flue Pipe Increaser, 7 x 6 in Nominal, Crimped End, 24 ga Thickness, Matte, Black, For Solid Fuel Appliances Such As Wood Stoves Designed for heavy duty wet stripping. Removes wax, dirt, and finish. Black.
POLISHING PAD FLR MACHINE 13IN Imperial BM0063 Stove Pipe Increaser FLUE PIPE INCREASER 5X6IN BLK
For polishing clean dry floors. Use dry or with a fine water mist to produce a high gloss wet look. White. Ecco Flue Pipe Increaser, 8 x 7 in Nominal, Crimped End, 24 ga Thickness, Matte, Black, For Solid Fuel Appliances Such As Wood Stoves Imperial Flue Pipe Increaser, 1-Piece, 5 x 6 in Nominal, 24 ga Thickness, Black
Homebasix A801-C3L Wood Fireplace Bellow Quickie 004 Homepro Window Squeegee/Scrubber Sure-Temp 206465 Fire Stop/Joist Shield
Oak finish with brass trim. A telescopic window washer and squeegee. The powder-coated steel handle extends to 90". The sponge is 12" and cellulene. The squeegee blade is rubber. There is a 10 year limited warranty on this item. However, a replacement head is not available. Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another.
Sure-Temp 208790 Spark Arrestor Unger PR450 Pro Squeegee Sure-Temp 206520 Wall Band
Diamond shaped 1/2" x 1" mesh, 18-8 stainless steel. Fits same size round chimney top. Keeps foreign objects out of chimney. Made of stainless steel, the 'PRO' is lighter and stronger than brass. Features a 'Fast-Lock' handle for quick blade and channel changes. Non-slip rubber grip handle is comfortable in all weather conditions. Coin adjustable screws hold the channel at desired tension. Cleans any flat, smooth surface. Handle can be used with TRIM10SCRAPER. Includes 'S' Channel and complete with Unger soft rubber blade. Attaches to all Unger poles with a press fit. Used along the wall to provide for 2" clearance and assure stability. Useful for suspending offsets. Required at 8' or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall.
Imperial BM0040 Oval to Round Stove Pipe Boot Imperial BM0082 Assembled Tee Imperial BM0083 Pipe Tee
Connect oval stove opening with round pipe. Used to direct exhaust upward. Used to direct exhaust upward.
FMI AK4 Combustion Outside Air Kit Imperial BM0084 Pipe Tee American Metal 6HS-SBA 3-Wall Wall Bracket
Complete kit with collar, hood, & 3' flex pipe. Fits all models. Used to direct exhaust upward. Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall.
Imperial BM0085 Pipe Tee ADAPTOR STOVE 6 IN            Behrens 617S Coal Hod
Used to direct exhaust upward. May be required to adapt some stove flue outlets to double wall stove pipe. Made of highest quality steel. Heavy-duty wire handle. Ideal for storing firewood or removing hot ashes.
North American Paper 420414 Floor Machine Pads STRIPPING PAD FLR MACHINE 17IN North American Paper 420514 Floor Machine Pads
Removes light scuff marks and dirt while producing a smooth, shining finish. Red. Designed for heavy duty wet stripping. Removes wax, dirt, and finish. Black. For polishing clean dry floors. Use dry or with a fine water mist to produce a high gloss wet look. White.
North American Paper 420314 Floor Machine Pads Selkirk 206488 Trim Plate Spacer PLUMBERS TAPE 1/2X.004X260IN
Designed for wet scrubbing or heavy duty spray cleaning. Removes heavy dirt and scuff marks. Blue. Used to trim the ceiling when a chimney is supported from above and extended down into room. Also used in conjunction with firestop/joist shield.
FMI 12S-8DM 2-Wall Chimney Support Sure-Temp 208520 Wall Band Behrens 617P Coal Hod
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. UL127 Listed. Up to 1700 Degree Pipe. Used along the wall to provide for 2" clearance and assure stability. Useful for suspending offsets. Required at 8' or closer intervals to stabilize the chimney, wherever it is supported along a vertical wall. Made of highest quality steel. Heavy-duty wire handle. Ideal for storing firewood or removing hot ashes.
American Metal 8HS-SBA 3-Wall Chimney Support Bracket Assembly Behrens B906P Ash Pail ADAPTOR CHIMNEY 6IN
Bracket for supporting the chimney pipe offsets, securing outdoor chimney to exterior wall. Multiple dry storage applications: Fireplace ashes, yard waste, trash, holds up to 25 pounds of pet food or bird seed. Lid moluded, locking bail keeps lid secure and deters rodents and other pests. Offset bottom keeps can off ground. Weather and chemical resistant. Used to complete the connection between DSP double wall stove pipe and any insulated chimney system.
FMI 30FS-8DM Fire Stop Spacer Ultra Temp 206450 Type A Locking Band Selkirk 206512 Adjustable Pitch Ceiling Plate
For Comfort Flame systems only. Ultra Temp Locking Band, Type A, Stainless Steel, 6 in Width, For use with Chimney Pipe Provides a finished appearance where the chimney passes through a sloped ceiling. Matte black finish. Adjusts to multiple roof pitches. Covers 4" space around chimney pipe (or 2" further than the required clearance).
North American Paper 422114 Floor Machine Pads North American Paper 421814 Floor Machine Pads BUFF PAD FLOOR MACHINE 20IN
Removes light scuff marks and dirt while producing a smooth, shining finish. Red. Designed for wet scrubbing or heavy duty spray cleaning. Removes heavy dirt and scuff marks. Blue. For thermal buffing and burnishing. Natural oils combined with burnishing action produce a wet look shine. Natural Fiber.
STRIPPING PAD FLR MACHINE 20IN BUFF PAD FLOOR MACHINE 20IN   North American Paper 422214 Floor Machine Pads
Designed for heavy duty wet stripping. Removes wax, dirt, and finish. Black. For thermal buffing and burnishing. Use dry or with spray buff solution. Will not break under pressure of ultra high speed burnishing while producing a wet look finish. Beige. For polishing clean dry floors. Use dry or with a fine water mist to produce a high gloss wet look. White.
Selkirk 266215 Fixed Stove Pipe Elbow Imperial KK0151 Circulating Fan BUFF PAD FLOOR MACHINE 17IN
Used to offset double wall stove pipe toward insulated chimney. Non-positional connection system allows 360 degree rotation. General purpose fan, eliminates hot spots near stoves and ceilings. Extra quiet. Plug-in connection and in-line switch. (2.14 lb). 4-3/4" x 4-3/4" x 2-1/8" For thermal buffing and burnishing. Use dry or with spray buff solution. Will not break under pressure of ultra high speed burnishing while producing a wet look finish. Beige.
American Metal 6FFU 3-Wall Round Roof Vent Flashing Sure-Temp 206400 Anchor Plate Sure-Temp 206435 Interior Resupport
Standard flashings fit various pitch roofs. Its double seamed construction protects from water leakage. Provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Stainless steel and heavy gauge steel construction for long life. Retains chimney with a twist-lock connection. Allows for two different methods of chimney resupport. First method is used at the immediate section of chimney above the upper elbow of an offset. Second method is used primarily when the immediate sections of the upper offset do not pass through a joist area and resupport is necessary. Support band is clamped around the chimney immediately below a locking band.  Straps are nailed to suitable framing at two inch clearance.
Selkirk 206242 Drip less Smoke Stove Pipe Adapter Selkirk 206240 Drip less Smoke Stove Pipe Adapter Sure-Temp 206463 Insulated Wall Thimble
For use in retrofit installations, this part can be installed from below with a finish support package and secured with screws. Note: Not for use with coal burning stoves. For use in new installations, this part can be installed by twist-locking the coupler on the DSAC into the first section of Sure-Temp-Type HT chimney pipe. Installs quickly and eliminates need for using individual firestops. Round shielding acts as a radiation shield and provides the required 2" air space clearance to combustibles. The 2 sections telescope to accommodate 6" to 11" wall thickness. The hole opening in the faceplate for No. 206463 is 8.25"; for No. 207463 - 9.25"; and No. 208463 - 10.25".
Imperial BM0014 Adjustable Stove Pipe Elbow Ameri-Vent 10RSC Double Wall Round Storm Collar Vogelzang TK-02 Tea Kettle
Adjustable from 0 to 90 degrees. Use with HS chimney roof flashing to insure water tight installation. Cast iron kettle-steamer. Steaming hot water adds humidity in the room. "Cool Touch" chrome spring handle. NOTE - Not for cooking for human consumption.
CAP AND TEE 6 INCH            Sure-Temp 200420 Roof Support Sure-Temp 200250 Roof Support
Used in conjunction with a vertical insulated chimney to provide easy access for inspection and cleaning. Fits all roof pitches and requires only simple framing. Brackets and mounting hardware only. Flexible roof support designed to fit 5, 6, 7, and 8" diameter chimney. The heavy duty band allows you to slide the length vertically to properly position this section in the system. The URSA can hold up to 30 feet of pipe, only 20 feet can be below.
Selkirk A 206825 Adjustable Roof Flashing Imperial BM0015 Adjustable Stove Pipe Elbow Selkirk 208240 Drip less Smoke Stove Pipe Adapter
Used to seal the opening where the chimney penetrates the roof and to direct rain and snow down from the roof and away from the chimney system. A series of adjustable flashings are available depending on your roof pitch. A flat and low pitch flashing is used to seal flat and low pitch roof (up to 2/12 pitch) openings. Adjustable from 0 to 90 degrees. For use in new installations, this part can be installed by twist-locking the coupler on the DSAC into the first section of Sure-Temp-Type HT chimney pipe.
Imperial BM0023 1-Piece Corrugated Stove Pipe Elbow American Metal 8FFU 3-Wall Round Roof Vent Flashing Sure-Temp 208463 Insulated Wall Thimble
Used to connect two lengths of flue pipe together. Standard flashings fit various pitch roofs. Its double seamed construction protects from water leakage. Installs quickly and eliminates need for using individual firestops. Round shielding acts as a radiation shield and provides the required 2" air space clearance to combustibles. The 2 sections telescope to accommodate 6" to 11" wall thickness. The hole opening in the faceplate for No. 206463 is 8.25"; for No. 207463 - 9.25"; and No. 208463 - 10.25".
Selkirk 266230 Fixed Stove Pipe Elbow Sure-Temp 206800 Round Type HT Chimney Topper Imperial BM0016 Adjustable Stove Pipe Elbow
Used to offset double wall stove pipe toward insulated chimney in a through-the-wall installation. Non-positional connection system allows 360 degree rotation. Designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. Adjustable from 0 to 90 degrees.
Sure-Temp 208400 Anchor Plate Sure-Temp 206490 Attic Insulation Shield Imperial BM0025 1-Piece Corrugated Stove Pipe Elbow
Provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Stainless steel and heavy gauge steel construction for long life. Retains chimney with a twist-lock connection. Used wherever a ceiling support, finish support, firestop or joist shield is installed below an open attic. Required to guard against the hazard of blown-in or blanket insulation filling any framed opening or contacting the chimney and possible storage of combustibles against the chimney. Used to connect two lengths of flue pipe together.
Sure-Temp 206430 Type HT Wall Support Kit Selkirk A 208825 Adjustable Roof Flashing AmeriVent 6HS-WTP 3-Wall Chimney Wall Thimble
Tested for use fully enclosed and has been designed in 5, 6, 7 and 8 inch sizes to carry up to 60' of height. Intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. Also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may only be fastened to the wall above or below the plate for chimneys which penetrate through the wall. Used to seal the opening where the chimney penetrates the roof and to direct rain and snow down from the roof and away from the chimney system. A series of adjustable flashings are available depending on your roof pitch. A flat and low pitch flashing is used to seal flat and low pitch roof (up to 2/12 pitch) openings. Used with tee branch and chimney section to provide proper clearance to combustible materials. Matte black painted surface for interior wall eliminates need for trim plate.
Selkirk A 206830 Adjustable Roof Flashing Sure-Temp 206440 Roof Brace Kit American Metal 6HS-CSA 3-Wall Ceiling Support Assembly
Used to seal the opening where the chimney penetrates the roof and to direct rain and snow down from the roof and away from the chimney system. A series of adjustable flashings are available depending on your roof pitch. A flat and low pitch flashing is used to seal flat and low pitch roof (up to 2/12 pitch) openings. Chimney support, use whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load, and to prevent damage from static and sliding snow. It should be used, at a midpoint on the chimney. Bracket adjusts from 4' to 6'. Use when chimney is installed in standard ceiling. 6" and 8" sizes fit between regular 16" O.C. ceiling joists. For exposed beam ceiling installations, use Roof Support. Cartoned to contain stainless steel matte black single wall adaptor.
Sure-Temp 208430 Type HT Wall Support Kit Sure-Temp 208440 Roof Brace Kit AmeriVent 8HS-WTP 3-Wall Chimney Wall Thimble
Tested for use fully enclosed and has been designed in 5, 6, 7 and 8 inch sizes to carry up to 60' of height. Intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. Also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may only be fastened to the wall above or below the plate for chimneys which penetrate through the wall. Chimney support, use whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load, and to prevent damage from static and sliding snow. It should be used, at a midpoint on the chimney. Bracket adjusts from 4' to 6'. Used with tee branch and chimney section to provide proper clearance to combustible materials. Matte black painted surface for interior wall eliminates need for trim plate.
Pro-Flex PFCT-1225 Pro-Flex American Metal 6HS-RCS Insulated Chimney Cap Sure-Temp 208490 Attic Insulation Shield
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Round termination features its own built-in spark arrestor. Protects against rain, debris and birds entering chimney. Used wherever a ceiling support, finish support, firestop or joist shield is installed below an open attic. Required to guard against the hazard of blown-in or blanket insulation filling any framed opening or contacting the chimney and possible storage of combustibles against the chimney.
Sure-Temp 208800 Round Type HT Chimney Topper Selkirk A 208830 Adjustable Roof Flashing Sure-Temp Ultra-Temp 206410 Square Ceiling Support
Designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. Used to seal the opening where the chimney penetrates the roof and to direct rain and snow down from the roof and away from the chimney system. A series of adjustable flashings are available depending on your roof pitch. A flat and low pitch flashing is used to seal flat and low pitch roof (up to 2/12 pitch) openings. With proper framing, all ceiling supports provide at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height.
American Metal 8HS-CSA 3-Wall Ceiling Support Assembly Sure-Temp Ultra-Temp 206411 Round Ceiling Support FMI V6F-8DM Roof Flashing
Use when chimney is installed in standard ceiling. 6" and 8" sizes fit between regular 16" O.C. ceiling joists. For exposed beam ceiling installations, use Roof Support. Cartoned to contain stainless steel matte black single wall adaptor. With proper framing, ceiling supports provide at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height. For 12" standard and high temperature pipe.
FMI 30E-8DM Offset and Return Elbow American Metal 6HS-WS 3-Wall Wall Support American Metal 6HS-RSA12 3-Wall Chimney Roof Support
FMI Offset and Return Elbow, 8 in Nominal, 30 deg Offset, For Wood Burning at 1700 deg Standard Pipes With clean out, heavy gauge base support the chimney tee and chimney. Includes removable outer wall tee cap for clean-out. For exposed-beam ceiling installations. Available in flat to 6/12 pitch (Standard) and for steeper pitches of 7/12 to 14/12. Can be used up to 22/12 with double wall connector. Use ceiling support when chimney is to be installed in standard ceiling. Contains stainless steel matte black single wall adaptor.
Pro-Flex PFCT-3425 Pro-Flex Harvey's 017031-144 Pipe Thread Seal Tape Sure-Temp Ultra-Temp 208410 Square Ceiling Support
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. With proper framing, all ceiling supports provide at least 2" minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height.
FAN SPEED KIT STANDARD SINGLE Sure-Temp 206420 Type HT Roof Support Kit BUCKET ASH W/LID BLK 4PC 13IN
Contains one 18" length of pipe, roof brackets and necessary hardware. Note: Not for use with coal burning stoves. Ash Bucket ,black powder coated finish, Overall size (Top dia. x Bottom dia. x H): 13" x 10" x 14" H, Includes lid.
Sure-Temp 206600 Type HT Roof Termination Kit American Metal 8HS-RSA12 3-Wall Roof Support FMI V12F-8DM Roof Flashing
Includes the basic components for a standard installation; CT - Round Top,  AF-6 - Adjustable Flashing, and SC - Storm Collar. 2/12 - 6-12 pitch. For exposed-beam ceiling installations. Available in flat to 6/12 pitch (Standard) and for steeper pitches of 7/12 to 14/12. Can be used up to 22/12 with double wall connector. Use ceiling support when chimney is to be installed in standard ceiling. Contains stainless steel matte black single wall adaptor. For 12" standard and high temperature pipe.
AmeriVent 8HS-RCS 3-Wall Round Vent Cap Sure-Temp 208420 Type HT Roof Support Kit Selkirk 206100 Insulated Chimney Tee with Tee Cap
Round termination features its own built-in spark arrestor. Protects against rain, debris and birds entering chimney. Contains one 18" length of pipe, roof brackets and necessary hardware. Note: Not for use with coal burning stoves. Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a Locking Band, to pass safely through combustible walls. An Insulated Tee Cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated Tee is 50'.
American Metal 6HS-RKS 3 Wall Round Fuel Kit FMI BK Variable Speed Manual Control Blower Fan FMI CP-8DM Chimney Pack
Built to last with a system combining corrosion resistant stainless steel and sturdy galvanized steel. It features a space-age ceramic fiber refractory blanket to withstand intermittent temperatures up to 2100 degrees F, is  noncombustible, thin and lightweight. It features the same small outer dimensions and is compatible with the AmeriVent Model FB. It is light enough to be easily installed by one man. Kit contains stainless steel cap, standard flashing, storm collar, ceiling support and single wall adaptor. Manual control, variable speed blower, Squirrel cage design with magnetic attachment. Fits all models: Circulating Wood Burning, B-Vent, Direct Vent Model Fireplaces and Vent Free, Circulating Fireboxes. Comfort Glow, Comfort Flame, Desa, Design Dynamics, FMI, Vanguard, Vantage Hearth. Roof flashing with 24" base, firestop spacer, round termination cap, storm collar and flue extension. Fits standard 8" inner diameter, 12-3/8" outer diameter, 1700 degree pipe.
Sure-Temp 206206 Type HT Insulated Elbow Kit Sure-Temp 208600 Type HT Roof Termination Kit Selkirk 208100 Insulated Chimney Tee with Tee Cap
Can be used for fixed offsets of 15 degrees slope or in pairs for offsets adjustable from zero degrees to 30 degrees slope. Greater angles are prohibited by UL standard 103 and by the terms of the product listing. Required: Locking bands (2 packaged with each elbow kit) allow 360 degree rotation and lock the components together in place at the exact offset required. Insulated elbows can be used at the same two-inch air space clearance as chimney sections. Includes 2 elbows, 2 locking bands and interior resupport. Includes the basic components for a standard installation; CT - Round Top,  AF-6 - Adjustable Flashing, and SC - Storm Collar. 2/12 - 6-12 pitch. Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a Locking Band, to pass safely through combustible walls. An Insulated Tee Cap is included which can be removed from bottom opening for inspection and cleanout. Maximum height of chimney which can be supported by an insulated Tee is 50'.
Pro-Flex PFCT-1275 Pro-Flex American Metal 8HS-RKS 3 Wall Round Fuel Kit Sure-Temp 206621 Pitched Ceiling Support Kit
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Built to last with a system combining corrosion resistant stainless steel and sturdy galvanized steel. It features a space-age ceramic fiber refractory blanket to withstand intermittent temperatures up to 2100 degrees F, is  noncombustible, thin and lightweight. It features the same small outer dimensions and is compatible with the AmeriVent Model FB. It is light enough to be easily installed by one man. Kit contains stainless steel cap, standard flashing, storm collar, ceiling support and single wall adaptor. For installation of a chimney in a cathedral or pitched ceiling such as standard A-Frame construction. Provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and an adjustable flashing. Selection of the adjustable flashing is determined by the pitch of your roof and ceiling. Contents: Round top, Smoke pipe adapter, Storm collar, Finishing collar, Adjustable pitch ceiling plate and Roof support package.
Harvey's 017209-144 Pipe Thread Seal Tape Sure-Temp 206211 Type HT Insulated Elbow Kit FAN VAR SPEED KT W/WALL SWITCH
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Can be used for fixed offsets of 30 degrees slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required: Locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 degrees to provide the exact orientation required. Insulated elbows can be used at the same 2'' air space clearance as chimney sections. Kit Includes: 2 elbows, 2 locking bands, and one interior resupport.
Ameri-Vent 6HS-030 3-Wall Chimney Pipe Offset Sure-Temp 206620 Flat Ceiling Support Kit Pro-Flex PFCT-3475 Pro-Flex
For use in pairs to permit chimney to "go around" joists, rafters, or other projections. Add chimney section between offsets to produce additional offset. Provides the support package and termination parts for a chimney that is supported by a flat ceiling and that passes through an attic area and penetrates the roof. Just add pipe lengths and the kit has all necessary parts for complete installation. Contents: Round top, Attic insulation shield, Storm collar, Finish support package, Adjustable flashing and Smoke pipe adapter. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
AmeriVent 6HS-TA 3-Wall Chimney Tee Assembly Sure-Temp 208621 Pitched Ceiling Support Kit Ameri-Vent 8HS-030 3-Wall Chimney Pipe Offset
Chimney tee, tee branch (made up of one 12" section of chimney), single wall adaptor, pipe end plate and tee cap. Use this combination where connection to chimney is made in branch of tee in Through-the-Wall installation. For installation of a chimney in a cathedral or pitched ceiling such as standard A-Frame construction. Provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and an adjustable flashing. Selection of the adjustable flashing is determined by the pitch of your roof and ceiling. Contents: Round top, Smoke pipe adapter, Storm collar, Finishing collar, Adjustable pitch ceiling plate and Roof support package. For use in pairs to permit chimney to "go around" joists, rafters, or other projections. Add chimney section between offsets to produce additional offset.
Sure-Temp 208620 Flat Ceiling Support Kit AmeriVent 8HS-TA 3-Wall Chimney Tee Assembly Sure-Temp 206622 Thru-the-Wall Support Kit
Provides the support package and termination parts for a chimney that is supported by a flat ceiling and that passes through an attic area and penetrates the roof. Just add pipe lengths and the kit has all necessary parts for complete installation. Contents: Round top, Attic insulation shield, Storm collar, Finish support package, Adjustable flashing and Smoke pipe adapter. Chimney tee, tee branch (made up of one 12" section of chimney), single wall adaptor, pipe end plate and tee cap. Use this combination where connection to chimney is made in branch of tee in Through-the-Wall installation. For a wall-supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running vertically up the exterior wall to termination above the roof line. Provides all necessary parts for a complete installation with the exception of required insulated pipe lengths to reach your desired chimney height. Contents: Round top, 12'' Insulated pipe length, Wall band, Insulated tee/plug, Finishing collar, Wall support kit, Smoke pipe adapter and Insulated wall thimble.
American Metal 6HS-TWK 3-Wall Chimney Installation Kit Sure-Temp 208622 Thru-the-Wall Support Kit Pro-Flex PFCT-12225 Pro-Flex
Designed for venting appliances through a side wall. Complete wall support components. Provides all-weather protection. For a wall-supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running vertically up the exterior wall to termination above the roof line. Provides all necessary parts for a complete installation with the exception of required insulated pipe lengths to reach your desired chimney height. Contents: Round top, 12'' Insulated pipe length, Wall band, Insulated tee/plug, Finishing collar, Wall support kit, Smoke pipe adapter and Insulated wall thimble. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
Pro-Flex PFCT-34225 Pro-Flex
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
   
 
1