Home > HOUSEWARES > CLEANING SUPPLIES > CLEANING IMPLEMENTS > FLOOR SQUEEGES
Sort By:
1
Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Pro-Flex PFSP-0302 Pro-Flex Striker Plate Harvey's 023015-48 Pipe Joint Compound
All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. Protective devices required where tubing passes through structural members. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Harvey 030005-144 Pipe Thread Compound Pro-Flex Floppy-Flex Protective Conduit Oatey 31229 Great White
Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. 12" long floppy-flex galvanized protective conduits for CSST tubing. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Oatey 30999 ABS Cement Harvey's 029035 Pipe Thread Compound Rectorseal 23710 T-Plus 2 Pipe Thread Sealant
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Oatey 31012 PVC Cement Pro-Flex PFSP-0307 Pro-Flex Striker Plate Harvey's 018100-24 P-4
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Protective devices required where tubing passes through structural members. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
KBI DF-0750-T Chemical Resistant Drum Faucet Oatey 30890 Rain-R-Shine Plumb Pak PP854-2 Pipe Joint Compound
3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing
Pro-Flex Floppy-Flex Protective Conduit Oatey 30883 PVC Cement BREAKER VACUUM BRASS 3/4INCH
12" long floppy-flex galvanized protective conduits for CSST tubing. Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40-110 degrees. SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building
Rectorseal 25790 Pipe Thread Sealant Harvey's 018400-24 PVC Cement B&K 108-904RP Backflow Preventer Vacuum Breaker
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Oatey 31128 CPVC Pipe and Fitting Cement Harvey's 018450-24 P-6E Oatey 30818 All-Purpose Cement
Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set; designed for use on all duct and conduit applications through 6" in diameter. Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified for use in potable water, sewer, drain, and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Harvey's 018500-24 A-6 Rectorseal 55902 PVC Cement Oatey 30850 PVC Cement
Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers, and drain, waste and vent (DWV). For use on PVC pipe through 2" Schedule 40 pressure piping and up to and including 4" Schedule 40 non-pressure (DWV) piping; it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
Oatey 31230 Great White Harvey's 018110-24 P-4 Harvey's 018700-24 C-4
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can.
Harvey's 018200-24 P-2 PVC Cement Oatey 31129 CPVC Pipe and Fitting Cement Harvey's 018000-24 Mp-6
Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can.
Oatey 30917 ABS Cement Oatey 31013 PVC Cement Brass Craft PS1087 Seal 'N Check Kit
Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings up to 6" in diameter. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. SALES AREA - ONLY IN THE WESTERN REGION. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
Plumb Pak PP854-1 Pipe Thread Sealant Oatey 31910 Flow-Guard Gold Harvey's 023030 Pipe Joint Compound
Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Harvey's 025020 Pipe Thread Compound Rectorseal 55970 Abs/PVC/CPVC Cement B&K 108-904 Silcock Vacuum Breaker
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Medium body multipurpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2" Schedule 40 and non-pressure piping systems through 6" Schedule 40 (excluding Schedule 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Unger 92123 Straight Floor Squeegee Oatey 30900 ABS/PVC Transition Cement Harvey's 018510-24 A-6
Soft, double moss rubber conforms to uneven surfaces leaving floors dry. Adjustable socket accepts most handles. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
Harvey's 018410-24 PVC Cement Harvey's 018210-24 P-12 Oatey 30821 All-Purpose Cement
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Oatey 31911 Flow-Guard Gold Oatey 30891 Rain-R-Shine Rectorseal 31631 Tru-Blu
Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732.
Harvey's 018710-24 C-4 CPVC Cement Oatey 32161 Hot Blue Lava PVC Cement Harvey's 029048 Pipe Thread Compound
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle.
Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Harvey's 018010-24 Mp-6 Oatey 15420 Pro Dope
Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Oatey 15804 Hercules Pipe Thread Sealant Harvey's 018120-12 P-4 B&K 109-204 Self-Closing Drum and Barrel Faucet
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01.
Harvey's 018220-12 P-2 PVC Cement Oatey 30863 PVC Cement REPLACEMENT PIN PLUG
Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Replacement Pin Plug for People's Paper Picker Pin (612.9639).
Rectorseal 25631 Pipe Thread Sealant Rectorseal 23631 T-Plus 2 Oatey 31094 PVC Cement
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
Arrowhead Brass PK1430 Air Vent Assembly Kit Pro-Flex PFBC-AB Pro-Flex Bonding Clamps Harvey's 023045 Pipe Joint Compound
Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Oatey 30925 ABS/PVC Transition Cement Harvey's 025050 Pipe Thread Compound
Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle.
Oatey 31014 PVC Cement Oatey 30812 Bonding Adhesive Oatey 32166 Hot Orange Lava
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. X-15 PVC bonding adhesive is formulated for use to join two sheets of PVC shower pan liner membrane together. Provides permanent, watertight seal to form larger membrane for use in tile shower or other concealed water-proofing applications. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846.
Unger 961350 Floor Squeegee Pro-Flex PFMF-1212 Tube To Pipe Adapter Harvey's 018720-12 C-4 CPVC Cement
22" Foam Rubber floor squeegee features a lightweight plastic base. The squeegee is for use with threaded poles and cleans water, oil and snow without scratching from uneven floor surfaces: grouted tiles or non-slip and broadcast grid floors. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can.
Harvey's 018420-12 PVC Cement Harvey's 018020-12 Mp-6 Oatey 15427 Pro Dope
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Oatey 30834 All-Purpose Cement Unger 960490 Total Reach Grabber Pro-Flex PFFN-1212 Tube To Pipe Adapter
Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Extend your reach safely without bending, straining or climbing a ladder. Easily reach and hold securely out of reach objects, up high or down low. Rubber coated wide jaws easily pick up small, delicate objects without crushing up to 5 lbs. Made of aluminum and features rubber over molded steel fingers Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Oatey 30902 ABS Cement Oatey 15806 Hercules Pipe Thread Sealant Rectorseal 23551 T-Plus 2 Pipe Thread Sealant
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Harvey's 018320-12 PVC Cement Rectorseal 25551 Pipe Thread Sealant Oatey 30876 PVC Cement
Fast setting, all-weather, medium bodied PVC solvent cement specifically recommended for cold weather and fast setting pressure applications. Recommended for pressure pipe: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Formulated for fast initial set up at temperatures down to 10 degrees fahrenheit. Effective temperature range -15 degrees to 110 degrees fahrenheit. Meets performance requirements of ASTM D-2564. Dauber can. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
Oatey 31121 PVC Cement Oatey 31132 PVC Cement Oatey 30893 Rain-R-Shine
Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Medium-bodied clear cement for use on PVC pipe and fittings. Up to 6" diameter. Formulated for fast initial set-up at temperatures down to -15 degrees F to 100 degrees F. schedule 40 and schedule 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit, and DWV. Non-pressure, DWV, up through 4" diameter: no primer needed where local codes permit. Meets ASTM D-2564. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit.
Oatey 31095 PVC Cement Oatey 31015 PVC Cement Pro-Flex PFMF-3406 Tube To Pipe Adapter
Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Harvey's 018130-12 P-4 Pro-Flex PFFN-3406 Tube To Pipe Adapter Harvey's 018230-12 P-12
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps Unger 960140 Straight Pro Squeegee Harvey's 018030-12 Mp-6
UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. Soft double moss rubber conforms to uneven surfaces leaving floors dry. Adjustable socket accepts most handles. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can.
Oatey 32162 Hot Blue Lava PVC Cement Oatey 31105 PVC Cement Oatey 30894 Rain-R-Shine
Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit.
Oatey 31008 PVC Cement Harvey's 025080 Pipe Thread Compound Oatey 15808 Hercules Pipe Thread Sealant
Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732.
Rectorseal 25431 Pipe Thread Sealant SHOCK ABSORBR SUPPLY MIP 1/2IN Harvey's 018430-12 PVC Cement
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 31122 PVC Cement Oatey 32167 Hot Orange Lava Rectorseal 23431 T-Plus 2 Pipe Thread Sealant
Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Harvey's 028005-144 Pipe Thread Compound Display Nifty Nabber Plus 960470 Rotatable Head Grabbing Tool Oatey 30847 All-Purpose Cement
For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air, and natural gas. Does not contain lead. Wipes clean from hands. Hang tab tube. Use to pick up items without bending or touching and to reach high shelves without strain. Built in magnet. Head rotates 90, 180, and 270 degrees. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Brass Craft CSSC22-36P Procoat Oatey 31226 Pipe Joint Compound Pro-Flex PFST-12 Pro-Flex Termination Plates
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings. Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Not for use on plastic threads. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Nifty Nabber 92134 Grabbing Tool Pro-Flex PFTE-BBB6 Tube Tee Pro-Flex PFMN-CCB 4-Port Pipe Manifold
Excellent for grabbing items high and low. Made of aluminum and features rubber over molded steel. Ideal for indoor and outdoor use. The powerful gear-driven claws grip small and odd-shaped objects. Built-in 1/4" round magnet located on the tip of one side of the grabber. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Each manifold has 4 1/2" female (FIP) branches.
Pro-Flex PFMN-BBB 4-Port Pipe Manifold Brass Craft CSSC22-48P Procoat Anderson Metals 59540-0612 Oil Drum and Tank Valve
Each manifold has 4 1/2" female (FIP) branches. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings. 3/4" mip x 3/8" flare.
Total-Reach 960570 Curved Squeegee Arrowhead PK1390 Replacement Self-Draining Vacuum Breaker Unger 91013 Straight Floor Squeegee
Features a pivoting aluminum channel with black rubber that is exchangeable and can be used from 2 sides. Handle socket provides optimum channel pivoting push-pull action and is designed for use with Total Reach extension poles. Replacement self-draining vacuum breaker for Arrowhead frost free hydrant. Fits all models with BFPSD after part number (backflow preventer, self draining) and 485BFP and 486BFP models. Nickel plated. 14-gauge galvanized steel construction with black EPDM rubber. Use with taper handle.
Brass Craft CSSL115E-36P Gas Appliance Connector Unger PPPP0 Paper Picker Pin Brass Craft CSSD105E-36P Gas Appliance Connector
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Ideal for picking up paper, debris and cans. Made of lightweight steel. Replacement pin plugs (997.4619) are available. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Unger 91015 Curved Floor Squeegee Brass Craft CSSC91E-48P Gas Appliance Connectors Unger AL140 Lightweight Taper Squeegee Handle
14-gauge galvanized steel construction with black EPDM rubber. Use with taper handle. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. The 'Pro Aluminum' 1.5 features a fluted aluminum handle with an ergonomic grip. For use with Push Pull, Water Wand squeegees and other products with a 1.5 taper socket.
Brass Craft CSSD54-60P Procoat Water Wand HM750 Floor Squeegee Pro-Flex PFST-34 Pro-Flex Termination Plates
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Twin foam rubber blades. Removes standard volumes of water from uneven floor surfaces; grouted tiles or non-slip and broadcast grid floors. It's reinforced handle socket is secured to the galvanized steel frame with 6 spot-welds for heavy-duty applications. Available with socket clamp or installed Acme Insert. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Lundmark Wax SOL9105W.7 Bees Wax Lubricant Unger AL14T Lightweight Taper Squeegee Handle Brass Craft CSSD105E-48P Gas Appliance Connectors
For wood screws, sliding drawers, candle making, etc. Dual-tipped handle with a combination Acme thread and a 3-degree cone tip. The 3-degree cone fits all the new Aquadozer models without any inserts, and it also fits all products with a 3.0 taper or universal threaded socket. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Pro-Flex PFTE-CCB6 Tube Tee Nifty Nabber 960430 Grabbing Tool Brass Craft CSSC91E-48P Gas Appliance Connectors
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Excellent for grabbing items high and low. Made of aluminum and features rubber over molded steel. Ideal for indoor and outdoor use. The powerful gear-driven claws grip small and odd-shaped objects. Built-in 1/4" round magnet located on the tip of one side of the grabber. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
REACHER/GRABBER TOOL 42.5IN   Unger 960630 Straight Floor Squeegee Total-Reach 960640 Curved Squeegee
Designed for heavy duty tasks. Ideal for outdoor use. Stainless steel teeth with reinforced rubber give the jaws extra strength to hold items securely. The ergonomic grip provides smooth, trigger-pull action to grab items low or high. A comfort-grip neoprene sleeve gives extra support for two-handed lifting of heavy objects. Head rotates to pick up items at any angle. Features a pivoting aluminum channel with black rubber that is exchangeable and can be used from 2 sides. Handle socket provides optimum channel pivoting push-pull action and is designed for use with Total Reach extension poles. Features a pivoting aluminum channel with black rubber that is exchangeable and can be used from 2 sides. Handle socket provides optimum channel pivoting push-pull action and is designed for use with Total Reach extension poles.
B&K 109-224 Drum and Barrel Faucet FLOOR SQUEEGEE 24IN BRACED    Quickie 016SUTRI Floor Squeegee
Heavy bronze construction. Quarter turn operation. Lockable handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. 24" heavy duty curved rubber floor squeegee.?Super durable rubber head with metal frame designed to hug the floor for efficient clean-up of water and other liquids. 60" hardwood handle. Steel connector and brace. Color brace. Designed for indoor/outdoor usage. For use on sealed concrete, tile and linoleum. Moves water, liquids and debris. Durable steel brace for heavy-duty use. 1-1/8 x 60" handle.
BEDLINERS FOR BABY CHNGE STATN Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit DIAPER CHANGING STATION
Plastic lined bed liners create a barrier between your child and the changer. 4-3/4" x 6-1/2" (Unfolded-13" x 18"). White. 500 count. Use with diaper changing station SKU # 516.6558. Includes: 25 ft. 1/2"  CSST flexible gas piping, one 1/2"  brass male fitting, one 1/2" special termination plate with male fittings, 1/2" MIP x 1/2" FIP ball valve connector - 24" long, 1/2" flare x 3/8" MIP union fitting, spool of yellow teflon tape, bottle leak detector, bonding clamp, installation/training guide and fitting assembly sheet. Designed to support a static load of 250 Lbs. Comes with a self-adhesive aluminum place card for the restroom door to indicate a changer is located inside. ADA Compliant when properly installed. Units only protrude 4" from the wall, which allows for installation in the smallest of rooms. All units feature easy to read ANSI compliant labels (ANSI Z535.3 ANSI Z535.4) and comply with ASTM F2285-04 "Standard Consumer Safety Specifications for Diaper Changing Tables in Commercial Facilities". Dimensions: 34-1/4" x 4" x 18".
   
 
1