Home > HOUSEWARES > CLEANING SUPPLIES > CLEANING IMPLEMENTS > SCRUBBERS
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape Harvey's 017117B Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Plumb Pak 04151 Pipe Thread Seal Tape Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide World Wide Sourcing PMB-042 Sillcock Handle
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia
Plumb Pak PP20855100 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape Danco 80416 Square Broach Valve Wheel Handle
For use on plumbing threads to prevent leaking. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel
Danco 80417 Round Broach Valve Wheel Handle FAUCET HANDLE WHEEL ROUND 12PT Mintcraft PMB-5053L Sillcock Keys
Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel Metal construction. 12pt. round broach. Metallic finish. Designed to fit hose bibb faucets, stopcocks and valves. Sillcock key for 1/4" stem. For use on outside water faucets.
Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle Pro-Flex PFSP-0302 Pro-Flex Striker Plate SCOTCH MINI LINT ROLLER
Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width Protective devices required where tubing passes through structural members. Made with Scotch Brand adhesive. Grabs tough to remove pet hair. Effectively picks up lint and pet hair from clothing, furniture, auto interiors and more. Mini-size is great for travel and convenience.
Harvey's 017252-144 Pipe Thread Seal Tape BRUSH LINT LARGE 2-SIDED      Quickie 409 Dust Pan
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Use to remove dust, lint, and pet hair to revitalize garments and restores fabric to look like new. Reusable, reverse direction cleaning. Works left and right handed. Dimensions: 9.75? L x 2.4? W x 1? H. Snap on dust pan, holds large debris. All plastic construction won't rust or crack, convenient hang up feature for easy storage.
World Wide Sourcing PMB-441 Hose Bibb Handle Pro-Flex Floppy-Flex Protective Conduit Plumb Pak PP806-1 Sillcock Faucet Wheel Handle
WORLDWIDE SOURCING Hose Bibb Handle, For T-Handle Lawn Faucet 12" long floppy-flex galvanized protective conduits for CSST tubing. Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems
SILLCOCK KEY 5/16IN           LINT ROLLER 60 SHEET W/REFILL Plumb Pak PP806-11 Sillcock Faucet Handle
SILLCOCK KEY 5/16IN
Our Price: $3.15
Used to open and close sillcocks or spigots. This key will fit 5/16 inch valves. Constructed of metal to provide strength and durability. Use to keep fabrics clean and fuzz-free. Eliminates lint, hair, and dust from nearly any cloth surface. High tack adhesive, effective without damaging clothes. Green plastic handle. 30 ft x 4 in. 12 point
TAPE SEAL PTFE 1X520          3M 836RF-56 Lint/Household Roller Refill Harvey's 017165-144 Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Refill for No. 836R-56, (SKU) 693.5456. 56 sheets. Hang Tag. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Oatey 31403 Gas Line Thread Tape Oatey 31402D Water Line Thread Seal Tape Harvey's 017065 Pipe Thread Seal Tape
Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed.
Plumb Pak PP806-10 Sillcock Faucet Handle Oatey 30999 ABS Cement Oatey 31012 PVC Cement
16 point Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
3M 836R-56 Scotch Lint/Household Roller Pro-Flex PFSP-0307 Pro-Flex Striker Plate BROOM BUDDY DUSTPAN
Keep clothes lint, fuzz and hair free. Use on pants, coats, sweaters, dresses, suits, formal wear and more. 56 sheets. Use (SKU) 3272739 for refill. Protective devices required where tubing passes through structural members. Wide angled dust pan snaps to broom handle. Comes in assorted colors.
Harvey's 018100-24 P-4 Oatey 30890 Rain-R-Shine Quickie 205-3/72 Scrubbing Pads
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Non-abrasive handle protects fingers and hands and makes cleaning easier. Hang-up feature for convenience.
Pro-Flex Floppy-Flex Protective Conduit Quickie 207-3/72 Scrubbing Pads Oatey 30883 PVC Cement
12" long floppy-flex galvanized protective conduits for CSST tubing. Curved grip provides secure hold while scrubbing grills, broilers, and garage surfaces. Solid surface backer prevents splattering on fingers. Heavy-duty, dark blue abrasive scrub pad fused to backer ensures lasting performance. Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40-110 degrees.
Harvey's 018400-24 PVC Cement HOUSEHOLD NO SCRATCH SCRUB    Oatey 31128 CPVC Pipe and Fitting Cement
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Conforms to the curves of your tub. Handle is comfortable, lightweight and water resistant. Long lasting. Hang Tag. Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
SCRUBBER FOAM SCRATCH FREE    Scotch-Brite 7721 Grill Scrub 3M 7722 Scotch-Brite Scrubbing Pads
Scrub Daddy?s FlexTexture changes texture based on your water temperature. Firm in cold water for tough scrubbing, soft in warm water for light cleaning. He is scratch free on over a dozen surfaces from non-stick to stainless steel and even car exterior paint. Scrub Daddy rinses free of debris, resists odors, and cleans well with water alone. His eyes hold onto your fingers and mouth cleans both sides of utensils. Top rack dishwasher safe. Large, mineral-coated scrubbing head to remove burnt-on food and grease. For grills with steel racks and oven grates. Strong handle for good leverage. No scratch, removes heel marks and wax build-up. Handle provides good cleaning leverage while protecting hands. Use for porcelain grill racks, lawn furniture, whitewall tires, deck and aluminum boats, rust and corrosion, ceramic tiles, canvas and old wallpaper paste.
Scotch-Brite 7723 Delicate Duty Bath Scrub Harvey's 018450-24 P-6E Quickie 441 Dust Pan
Removes soap scum and water spots without scratching delicate surfaces. Handle provides good cleaning leverage while protecting hands. For swimming pools, fiberglass, marine topside and brightwork, ceramic tile, wood floors and trim, vinyl and upholstery. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set; designed for use on all duct and conduit applications through 6" in diameter. Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified for use in potable water, sewer, drain, and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can. Extra wide 11? beveled opening.  Snaps onto standard broom handle ? also features hole in handle for hang-up. Plastic.
Plumb Pak PP806-15 Tee Valve Faucet Handle Quickie 258 Refrigerator Brush Oatey 30818 All-Purpose Cement
Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point Reaches into heating vents, grates, dryer vents and lint traps, between radiators, under and around refrigerators and ovens. Removes dust, cobwebs, lint, hair.  20" fiber length bends to reach awkward surfaces where other cleaning tools cannot reach. 56 rows of fiber, 27? overall length. 1 5/8? wire wound nylon tapered fibers fit within narrow grates and other openings. Ergonomic comfort grip. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Harvey's 018500-24 A-6 Rectorseal 55902 PVC Cement Oatey 30850 PVC Cement
Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers, and drain, waste and vent (DWV). For use on PVC pipe through 2" Schedule 40 pressure piping and up to and including 4" Schedule 40 non-pressure (DWV) piping; it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
DUSTPAN/BRUSH SET             Plumb Pak PP874-00PC Shut Off Key Harvey's 018110-24 P-4
Flagged fibers on brush gather small particles. All plastic construction will not rust or crack. Brush locks in full-size dust pan to keep set together. Convenient hang-up feature. Key for loose key stops. Tamper proof. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 018700-24 C-4 Harvey's 018200-24 P-2 PVC Cement Oatey 31129 CPVC Pipe and Fitting Cement
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
Harvey's 018000-24 Mp-6 DUSTPAN CHARCOAL DISPLAY      Oatey 30917 ABS Cement
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Ideal for quick clean-ups. Pan has a tooth-edged broom cleaner and flexible edge for a more efficient dirt pick-up. Charcoal Gray. Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings up to 6" in diameter. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. SALES AREA - ONLY IN THE WESTERN REGION.
Oatey 31013 PVC Cement Oatey 31910 Flow-Guard Gold Arrowhead PK1250 Sillcock Wheel Handle
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. Green wheel handle and stainless steel screw. Fits all models.
Rubbermaid FG200500 CHAR Dust Pan Rectorseal 55970 Abs/PVC/CPVC Cement Mintcraft Pro DL-5004 Dustpans
Heavy-duty injection-molded plastic construction in extra-large size to accommodate large jobs for quick clean-up. Medium body multipurpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2" Schedule 40 and non-pressure piping systems through 6" Schedule 40 (excluding Schedule 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. Black powder coated finish, steel material. Thickness: 0.6mm - body, 1mm - handle. 12" wide mouth.
Danco 10006 Faucet Handle with Adapter Oatey 30900 ABS/PVC Transition Cement FABRIC SHAVER ELEC W/BRUSH
Fits all outdoor faucets. Larger, ergonomic handle is easier to turn on/off. Durable construction (heavier gauge zinc). Includes universal adapter and screws. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. Use to remove pilling and fuzz from fabrics and upholstery. The cleaning brush keeps the unit operating to its fullest potential to beautifully restore fabric to a smooth, even finish. Rust resistant steel, durable shaver head. Requires 2 AA batteries, not included. Travel size.
Harvey's 018510-24 A-6 Harvey's 018410-24 PVC Cement Harvey's 018210-24 P-12
Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Arrowhead PK1290 Oval Sillcock Wheel Handle Oatey 30821 All-Purpose Cement Oatey 31911 Flow-Guard Gold
Green wheel handle and stainless steel screw. Fits all models. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Arrowhead Brass PK1300 Loose Key Handle Oatey 30891 Rain-R-Shine Harvey's 018710-24 C-4 CPVC Cement
Loose key handle. Fits all models. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can.
Oatey 32161 Hot Blue Lava PVC Cement Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Harvey's 018010-24 Mp-6
Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can.
Quickie 407-3/6 Dust Pan Quickie 446-3/48 Homepro-Mini Sweep Utility Dusters Fulton 182B-20PK Open Dust Pan 12-3/4 in W x 7-1/2 in H
Epoxy-coated steel ribbed construction for extra strength. Convenient hang-up feature. Interlocking dust pan and brush in easy to remove design. Ergonomic soft-grip handle and flagged, angled poly fibers for easy sweeping. Convenient hang-up feature. Fulton Open Dust Pan, Heavy Duty, 12-3/4 in Width, 7-1/2 in Height, Steel, Black, Enamel Finish, For Industrial, Institutional and Janitorial Use
Harvey's 018120-12 P-4 Harvey's 018220-12 P-2 PVC Cement Oatey 30863 PVC Cement
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
Oatey 31094 PVC Cement Pro-Flex PFBC-AB Pro-Flex Bonding Clamps DUSTER AND DUSTPAN
Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. 10-1/2" brush attached. Assorted colors
Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Oatey 30925 ABS/PVC Transition Cement Oatey 31014 PVC Cement
Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
Oatey 30812 Bonding Adhesive 3M 549 Scotch Brite Shower and Bath Scrubbers Mintcraft T1543L Sillcock Key
X-15 PVC bonding adhesive is formulated for use to join two sheets of PVC shower pan liner membrane together. Provides permanent, watertight seal to form larger membrane for use in tile shower or other concealed water-proofing applications. Removes soap scum without scratching. Replaceable cleaning head. Heavy-duty handle extends up to 2 feet. Hang Tag. Use refill number 560 (SKU 018.8292). Hardened steel. Designed to fit 1/4", 9/32", 5/16", and 11/32" square stem.
Oatey 32166 Hot Orange Lava SCRUBBER FOAM COLOR 3 PACK    Pro-Flex PFMF-1212 Tube To Pipe Adapter
Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846. Multiple colors allow you to color code your cleaning jobs. Scrub Daddy?s FlexTexture changes texture based on your water temperature. Firm in cold water for tough scrubbing, soft in warm water for light cleaning. He is scratch free on over a dozen surfaces from non-stick to stainless steel and even car exterior paint. Scrub Daddy rinses free of debris, resists odors, and cleans well with water alone. His eyes hold onto your fingers and mouth cleans both sides of utensils. Top rack dishwasher safe. 4? diameter. Pack of 3. Multi color. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
CLEANER COOK TOP KIT          Rubbermaid FG9B5900 BLA Dust Pan Mintcraft Pro DL-5006 Dustpans
CLEANER COOK TOP KIT
Our Price: $10.24
Offers all the essential tools for keeping glass/ceramic smooth top range clean, shiny and protected. Removes burned on foods. Protective formula keeps foods from sticking. Non-abrasive. Includes: 2oz Weiman glass cooktop cleaner & polish, cleaning tool, scraper tool and Weiman cooktop scrubbing pad. Heavy duty plastic construction. For quick clean-ups. Holds ample amounts of dirt and debris. Black matte grip. Black powder coated finish, steel material. Thickness: 0.6mm - body, 1mm - handle.
Harvey's 018720-12 C-4 CPVC Cement Harvey's 018420-12 PVC Cement 20GAUGE METAL DUST PAN
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. 20-guage metal.
Harvey's 018020-12 Mp-6 Oatey 30834 All-Purpose Cement Plumb Pak PP855-1 Pipe Thread Seal Tape
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. For use on plumbing threads to prevent leaking.
Pro-Flex PFFN-1212 Tube To Pipe Adapter Oatey 30902 ABS Cement Harvey's 018320-12 PVC Cement
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Fast setting, all-weather, medium bodied PVC solvent cement specifically recommended for cold weather and fast setting pressure applications. Recommended for pressure pipe: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Formulated for fast initial set up at temperatures down to 10 degrees fahrenheit. Effective temperature range -15 degrees to 110 degrees fahrenheit. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 30876 PVC Cement Oatey 31121 PVC Cement Oatey 31132 PVC Cement
Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Medium-bodied clear cement for use on PVC pipe and fittings. Up to 6" diameter. Formulated for fast initial set-up at temperatures down to -15 degrees F to 100 degrees F. schedule 40 and schedule 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit, and DWV. Non-pressure, DWV, up through 4" diameter: no primer needed where local codes permit. Meets ASTM D-2564.
Oatey 30893 Rain-R-Shine Oatey 31095 PVC Cement Quickie 428 Dust Pan
Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Ribbed construction for extra strength. Large handle for easier lifting of heavy-duty loads.
DUST PAN JUMBO 22 INCH        Oatey 31015 PVC Cement Pro-Flex PFMF-3406 Tube To Pipe Adapter
For quick clean-ups. Heavy-duty plastic construction. Ideal for environmental services. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Plumb Pak PP855-100 Pipe Thread Seal Tape Harvey's 018130-12 P-4 DUST PAN 17IN ALUMINUM FINSH
For use on plumbing threads to prevent leaking. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Thickness: 1.2mm - body, 1mm - handle.
Pro-Flex PFFN-3406 Tube To Pipe Adapter Harvey's 018230-12 P-12 Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
Harvey's 018030-12 Mp-6 DEBRIS COLLECTOR JOBSITE      Oatey 32162 Hot Blue Lava PVC Cement
DEBRIS COLLECTOR JOBSITE
Our Price: $15.64
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Pan width is 24". Holds up to 40 pounds. Hang hole for easy storage. Sturdy ribbed construction for strength. High polished finish for easy clean-up. Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564.
DUST PAN UPRIGHT LOBBY BLACK  Oatey 31105 PVC Cement Oatey 30894 Rain-R-Shine
Durable rear wheels improve wear resistance. Ideal for use in malls, restaurants and lobbies. Will not stain, discolor or absorb odors. 24" handle. 11.3"W x 5"H x 12.8"L. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit.
Oatey 31008 PVC Cement Mueller 104-511 ProLine Anti-Siphon Frost Free Sillcock Valve Harvey's 018430-12 PVC Cement
Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 31122 PVC Cement LOBBY DUST PAN WITH WHEELS    Oatey 32167 Hot Orange Lava
Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Lobby dustpan with wheels, 30 inch handle, flip-lock mechanism secures dustpan while in use. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846.
Quickie 495 Dust Pan Mueller 104-403 ProLine Frost Free Sillcock Valve Oatey 30847 All-Purpose Cement
Minimizes back strain. Snap locks for easy use and release.  Perfect for large clean-ups at the jobsite, home, garden or warehouse. Reinforced steel handle with ergonomically angled grip.  Pan swivels 90 degrees to hold debris in place while transporting. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Lobby Pro FG253100 BLA Long Handle Dust Pan Brass Craft CSSC22-36P Procoat BROOM LOBBY/DUST PAN FLIP LOCK
Durable rear wheels improve wear resistance. For use in malls, restaurants and lobbies. Will not stain, discolor or absorb odors. 5-3/4" x 12" x 36-5/8". Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings. Flip-lock dust pan & lobby broom. 30" contoured powder coated steel handle. 140 cubic inch dust pan with lip. Lobby broom with 100% split tip poly fiber, 30? steel handle with comfort grip & hang-up feature. Lobby broom and flip-lock dust pan snap together for easy and convenient storage.
Mueller 104-513 ProLine Anti-Siphon Frost Free Sillcock Valve Mueller 104-404 ProLine Frost Free Sillcock Valve JUMBO LOBBY DUST PAN
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton. High impact, lightweight, polypropylene plastic. Swivel pan and T-bar can be locked upright for mobility. 12" wide mouth. 22" metal handle with plastic grip.
Pro-Flex PFST-12 Pro-Flex Termination Plates Mueller 104-519 ProLine Anti-Siphon Frost Free Sillcock Valve Mueller 104-405 ProLine Frost Free Sillcock Valve
Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton.
Pro-Flex PFTE-BBB6 Tube Tee Pro-Flex PFMN-CCB 4-Port Pipe Manifold Pro-Flex PFMN-BBB 4-Port Pipe Manifold
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Each manifold has 4 1/2" female (FIP) branches. Each manifold has 4 1/2" female (FIP) branches.
Brass Craft CSSC22-48P Procoat Mueller 104-515 ProLine Anti-Siphon Frost Free Sillcock Valve Mueller 104-521 ProLine Anti-Siphon Frost Free Sillcock Valve
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off.
Continental 912BK Dust Pan Mueller 104-517 ProLine Anti-Siphon Frost Free Sillcock Valve Brass Craft CSSL115E-36P Gas Appliance Connector
Plastic hopper with strong vinyl coated steel handle. Pan snap-locks in use and releases to dump or carry. Space saving hanger for storage. The true-edge of pan conforms to floor - no need for repeated sweeping. 10 3/4" x 12" x 36 3/4" CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Plumb Pak PP806-20 Sill Cock Key Brass Craft CSSD105E-36P Gas Appliance Connector Brass Craft CSSC91E-48P Gas Appliance Connectors
For 1/4" square stem. Zinc finish, carded. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Brass Craft CSSD54-60P Procoat Mueller 104-823HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-841HC ProLine Quarter Master Anti-Siphon Sillcock Valve
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Pro-Flex PFST-34 Pro-Flex Termination Plates Mueller 104-825HC ProLine Quarter Master Anti-Siphon Sillcock Valve Brass Craft CSSD105E-48P Gas Appliance Connectors
Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Pro-Flex PFTE-CCB6 Tube Tee Mueller 104-827HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-845HC ProLine Quarter Master Anti-Siphon Sillcock Valve
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Brass Craft CSSC91E-48P Gas Appliance Connectors Mueller 104-829HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-847HC ProLine Quarter Master Anti-Siphon Sillcock Valve
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
PLUMBERS TAPE 1/2X.004X260IN  Mueller 104-849HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-851HC ProLine Quarter Master Anti-Siphon Sillcock Valve
1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Mueller 104-795HC Frost Free Quarter Turn Sillcock Valve Mueller 104 Anti-Siphon Frost Free Quarter Turn Sillcock Valve Mintcraft Pro 2033 Dustpans
Mueller Sillcock Valve, Frost Free Quarter Turn, Series: 104, Push-Fit Inlet, 1/2 in Inlet, GHT Outlet, 1/2 in Outlet, 8 in Length Through Valve, 125 psi, Brass Body, Chrome Plated 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. Rubber edge allows easy collection of dirt and debris. Large mouth opening for quick and easy cleanup. Dustpan snaps on to broom handle for easy storage. 14" wide mouth. Ridged edges for cleaning. Made of recycled materials.
Mueller 104-797HC Frost Free Quarter Turn Sillcock Valve Arrowhead 456-04LF Standard Frost Free Hydrant Arrowhead 455-04LF Frost Free Hydrant
Mueller Sillcock Valve, Frost Free Quarter Turn, Series: 104, Push-Fit Inlet, 1/2 in Inlet, GHT Outlet, 1/2 in Outlet, 10 in Length Through Valve, 125 psi, Brass Body, Chrome Plated 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw.
Arrowhead 456-06LF Standard Frost Free Hydrant Arrowhead 455-06LF Frost Free Hydrant Arrowhead 456-10LF Standard Frost Free Hydrant
1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle.
Arrowhead 455-10LF Frost Free Hydrant Arrowhead 455-08LF Frost Free Hydrant Arrowhead 456-08LF Standard Frost Free Hydrant
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle.
Arrowhead 455-12LF Frost Free Hydrant Arrowhead 456-12LF Standard Frost Free Hydrant Homebasix 2149 Household Brooms
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Back-saver design allows for easy clean up of dirt and dust with no bending over. Dustpan locks into place while in use and unlocks to fold for easy storage. 9" sweeping range. 7/8" x 36" metal broom handle. Poly dust pan with 10" mouth.
Arrowhead 425-08LF Anti-Siphon Frost Free Hydrant Arrowhead 425-10LF Anti-Siphon Frost Free Hydrant DUST PAN & BRUSH SET PLASTIC
Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. Hooded pan collects dirt, eliminating overspill and full "split-tip" brush picks up every speck of dirt. The soft lip is perfect for picking up the finest dirt particles. Designed with an exclusive patented "no slip" comfort grip and convenient hang up feature. Snaps together for easy storage.
Arrowhead 425-12LF Anti-Siphon Frost Free Hydrant Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit Harvey's 017031-144 Pipe Thread Seal Tape
Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. Includes: 25 ft. 1/2"  CSST flexible gas piping, one 1/2"  brass male fitting, one 1/2" special termination plate with male fittings, 1/2" MIP x 1/2" FIP ball valve connector - 24" long, 1/2" flare x 3/8" MIP union fitting, spool of yellow teflon tape, bottle leak detector, bonding clamp, installation/training guide and fitting assembly sheet. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
INSERT FIREPLACE ELE W/HEATER HEATER WALL MNT 26IN FIREPLACE Harvey's 017209-144 Pipe Thread Seal Tape
Real dancing yellow flame look. Heater with circulating blower. LED technology efficient. Operates with or without heat. Real cast iron front. Projects flame onto included back screen. Comes fully assembled. Heats up to 700 square feet, 1500 watts.  Remote control. Size: 23?W x 21.5?H x 12.62"D. Realistic logwood flame effect (Resin logwood). Black flat tempered glass front panel, with remote control. Alternative manual control panel on fire. Flame effect can be used independently, 8 adjustable flame functions. Safety thermal cut-off device, 120V/60Hz. CSA certified. Size: 26" x 3-3/4" x 20-1/2". 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.