Home > HOUSEWARES > CLEANING SUPPLIES
Choose a sub category:
CHEMICALS & CLEANERS CLEANING IMPLEMENTS WINDOW CLEANING SUPPLIES
BROOMS AND MOPS VACUUMS & FLOOR EQUIPMENT TRASH BAGS
TRASH & RECYCLE CANS BUCKETS & PAILS SERVICE CARTS
PAPER AND PLASTIC PRODUCTS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps B&K G85-300HC Stud Guard B&K G85-500HC Stud Guard
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Protects pipes and wiring installation. Protects pipes and wiring installation.
WASHER WATER HEATER SUPPLY    B&K G85-900HC Stud Guard B&K G86-800HC Stud Plate
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Protects pipes and wiring installation. Protects pipes and wiring installation.
Danco 88493 Water Heater Washer American Valve P600U 1/2 PVC Fitting Worldwide Sourcing TC-15 Flexible Test Caps
Water heater supply line washer. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Camco 11523 Drain Valves Fernco PQC-101 Qwik Caps American Valve P600U 3/4 PVC Fitting
Permanent installation, fits directly into water heater for easy draining. 2-1/2" length. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
Worldwide Sourcing TC-2 Flexible Test Caps Flo Control QUIK-FIX Expansion Pipe Repair Coupling Camco Mfg 11061 Dip Tube
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket.
Fernco PQC-102 Qwik Caps Camco 07133 Element Gasket Kit Oatey 33400 Mechanical Test Plug
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Worldwide Sourcing TC-3 Flexible TestCaps Flo Control QUIK-FIX Expansion Pipe Repair Coupling B and K 168-003NL Dielectric Unions
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Bissell Inc 9351 Upholstery Shampoo Flo Control QUIK-FIX Expansion Pipe Repair Coupling Flo Control CCC-0500 Tube Coupling
Loosens and removes tough stains, embedded dirt, and odors from fibers. Formulated to safely deep clean fabric, upholstery and carpet fibers. Non-toxic. Dries quickly. Aerosol. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Flo Control Tube Coupling, 1/2 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries
American Valve P600U 1 PVC Fitting Fernco PQC-103 Qwik Caps Oatey 33401 Mechanical Test Plug
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
American Valve P600U 1 1/4 PVC Fitting B K Industries 168-004NL Dielectric Unions Trewax 887045027 Instant Floor Wax Stripper
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Quickly and easily penetrates and lifts all brands of floor finish for easy pick up with a mop or wet vacuum.
Flo Control CCC-0750 Tube Coupling Worldwide Sourcing TC-4 Flexible Test Caps Camco 10623 Dielectric Nipple
Flo Control Tube Coupling, 3/4 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
Fernco PQC-104 Qwik Caps Oatey 33402 Mechanical Test Plug Camco 2143 High Watt Density Water Heater Element
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG UL Listed, gasket included.
B and K 167-004NL Dielectric Unions Oatey 33403 Mechanical Test Plug B and K 102-816 Water Heater Drain Valves
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
WaterFlex 0437012 Corrugated Flexible Water Heater Connector Scotchgard 4101D Fabric Protector American Valve P600U 1 1/2 PVC Fitting
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Helps to block stains, so they release with a gentle wash. Won?t change the look, feel or breathability of most fabrics when applied as directed. Ideal for upholstery, clothing, table linens, throw pillows and slip covers. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
American Valve P600U 2 PVC Fitting Camco 07223 Adapter Kit Trewax Gold Label 887135027 Sealer Floor Wax
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. For vinyl, rubber, and linoleum floors. Seals floors, providing a brilliant gloss, durable protection and wear.
B and K Industries 168-005NL Dielectric Unions Trewax 887142027 Stone and Tile Sealer Finish Professional Mop & Glo 1920075057 Triple Action Floor Shine Cleaner
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. One-step beauty treatment for interior/exterior stone and masonry surfaces. Provides excellent protection and durability. Detergent, scuff, and stain resistant. Leaves a high gloss, durable shine on both regular and no-wax floors. Cleans and shines as you damp mop.
Camco 2343 High Watt Density Water Heater Element CopperFlex WB034-24N Corrugated Water Heater Connector Flo Control QUIK-FIX Expansion Pipe Repair Coupling
UL Listed, gasket included. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Future Shine Pledge 11182 Floor Finish B and K 160-303NL Compression Couplings
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Makes wood floors look new again. Removes scuffs from busy floors, leaving only a radiant shine. Protects your floors and helps prevent dirt from collecting in grooves. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF.
Camco 7723 Dual Element Lower Water Heater Thermostat Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat Camco 2203 High Watt Density Water Heater Element
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed, gasket included.
Camco Mfg 10473 Pressure Relief Valve 3/4 In CONNECTOR SS 3/4F1960X3/4X18IN Camco 4363 High Watt Density Water Heater Element
3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever. UL Listed, gasket included.
Camco 2243 High Watt Density Water Heater Element CopperFlex WB00-12N Water Heater Connector Camco 2293 High Watt Density Water Heater Element
UL Listed, gasket included. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. UL Listed, gasket included.
Camco 2283 High Watt Density Water Heater Element Flo Control QUIK-FIX Expansion Pipe Repair Coupling Camco 2263 High Watt Density Water Heater Element
UL Listed, gasket included. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. UL Listed, gasket included.
Scotchgard 1023H Triple Action Carpet and Rug Protector Camco 4383 High Watt Density Water Heater Element Camco 4603 High Watt Density Water Heater Element
Resists soil and stains to keep rugs and carpets clean and new-looking longer. 1 can protects approximately a 9' x 12' area. Aerosol. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 3943 High Watt Density Water Heater Element Camco 2223 High Watt Density Water Heater Element Camco 01023 Flapper Style Dielectric Heat Trap
UL Listed, gasket included. UL Listed, gasket included. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP.
WaterFlex 0437024 Corrugated Flexible Water Heater Connector CopperFlex WB00-15N Water Heater Connector Camco 4503 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 10063 Water Heater Connector Camco 4483 High Watt Density Water Heater Element Camco 2583 Low Watt Density Water Heater Element
Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL & CSA listed, gasket included.
Scotts 30019 Floor Restore Camco 2163 High Watt Density Water Heater Element Camco 4523 High Watt Density Water Heater Element
A quick and easy way to enhance and renew dull, worn natural hardwood floors. Minimizes scratches and leaves a clean, bright finish that will protect floors for months. Average coverage is approximately 300 square feet. Do not use on unsealed, unfinished, waxed or oiled floor. Not for use on synthetic or laminate floors. UL Listed, gasket included. UL Listed, gasket included.
CopperFlex WB00-18N Water Heater Connector Watts 100XL Temperature and Pressure Relief Valve Watts LL100XL-150/210 Temperature/Pressure Relief Valve
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Watts 100XL Temperature and Pressure Relief Valve Camco 4703 Low Watt Density Water Heater Element Camco 2363 High Watt Density Water Heater Element
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UL Listed, gasket included. UL Listed, gasket included.
Fluidmaster B1H12 Water Heater Connector B and K 160-304NL Compression Couplings Beaumont 887071969 Instant Wax Remover
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. Quickly and easily penetrates and lifts all brands of floor finish for easy pick up with a mop or wet vacuum.
Camco 4803 High Watt Density Water Heater Element American Valve P600U 2 1/2 PVC Fitting Oatey 38707 Pipe Guards
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed.
Oatey 38708 Pipe Guards Plumb Pak PP888-10LF Water Heater Connector CopperFlex WB00-24N Water Heater Connector
Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Camco 23503 Dielectric Union Watts 100XL-8-150 Temperature and Pressure Relief Valve Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
Fluidmaster B4H18 Water Heater Connector Fluidmaster B3H18 Water Heater Connector Fluidmaster B1H18 Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Fluidmaster B2H18 Water Heater Connector Camco 4643 High Watt Density Water Heater Element Plumb Pak PP888-1LF Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel
Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector Camco 08143 Replacement Single Element Water Heater Thermostat Fluidmaster B1H24 Water Heater Connector
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Camco 11572 Anode Rod Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector
Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Plumb Pak PP888-3LF Water Heater Connector Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 08163 Adjustable Water Heater Upper Thermostat
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 7843 Single Element Water Heater Thermostat With HLC Camco 09423 Replacement Gasket Kit Camco 10493 Temperature and Pressure Relief Valves
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts. Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
Watts 100XL-8-125 Temperature and Pressure Relief Valve American Valve P600U 3 PVC Fitting Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
B and K Industries 160-305NL Compression Coupling Plumb Pak PP888-11LF Water Heater Connector WaterFlex 0437118 Corrugated Flexible Water Heater Connector
Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Trewax Gold Label 887171968 Floor Sealer Trewax Gold Label 887171967 High Gloss Sealer Floor Wax Cash Acme 22441LF Sharkbite
Recommended for vinyl, linoleum, rubber and tile floors. Seals floors, providing durable protection and wear. Carnauba based. For vinyl, rubber, and linoleum floors. Seals floors, providing a brilliant gloss, durable protection and wear. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip.
Plumb Pak PP888-4LF Water Heater Connector Cash Acme 22604LF Sharkbite Water Heater Installation Kit Trewax Gold Label 887171970 Stone and Tile Floor Sealer
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. One-step beauty treatment for interior/exterior stone and masonry surfaces. Provides excellent protection and durability. Detergent, scuff, and stain resistant.
VALVE T/P 3/4IN 3-5/16LS150PSI Camco 2923 Ultra Low Watt Density Water Heater Element Camco 2853 Ultra Low Watt Density Water Heater Element
Temperature and pressure relief valve. Relieves pressure up to 150 psi/210F. 3/4 inlet/outlet, copper alloy body, 3-5/16" shank. UL & CSA listed. Gasket included. Best when water has high mineral content, withstands dry firing, heats in lime and sand buildup that would burn out ordinary elements, highest grade nickel and chromium incoloy, UL Listed, gasket included.
Camco 2903 Ultra Low Watt Density Water Heater Element Cash Acme U3088FLEX24LF Braided Flexible Water Heater Connector B and K Industries 160-306NL Compression Coupling
UL Listed, gasket included. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF.
Bona WP511059001 Hard Surface Floor Polish Bona WP510059001 Floor Polish Bona WP500359001 Floor Polish
Restores the shine while offering protection against wear. The durable, urethane acrylic blend has an exceptionally fast dry time and no waxy build-up. Adds a high gloss protective layer and fills in micro scratches, evening out the appearance of your floor for a refreshed new look. Use every 1-4 months to keep floors revitalized and looking their best. Formulated for linoleum, stone, terrazzo, vinyl, sealed porous marble, laminate and no-wax sealed tile (ceramic, Mexican Saltillo, quarry). GREENGUARD certified. Covers 550 sq. feet. Restores the shine while offering protection against wear. The durable, urethane acrylic blend has an exceptionally fast dry time and no waxy build-up. Adds a protective layer and fills in micro scratches, evening out the appearance of your floor for a refreshed new look. Use every 1-4 months to keep floors revitalized and looking their best. Specially designed for wood floors, including factory-prefinished floors. Covers 550 sq. feet. GREENGUARD certified. Restores the shine while offering protection against wear. The durable, urethane acrylic blend has an exceptionally fast dry time and no waxy build-up. Adds a protective layer and fills in micro scratches, evening out the appearance of your floor for a refreshed new look. Use every 1-4 months to keep floors revitalized and looking their best. Specially designed for wood floors, including factory-prefinished floors. Covers 550 sq. feet. GREENGUARD certified.
Camco 10193 Water Heater Connector Kit Plumb Pak PP888-12LF Water Heater Connector American Valve P600U 4 PVC Fitting
Contains: (2) 3/4" x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll teflon tape. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
WaterFlex 0437124 Corrugated Flexible Water Heater Connector Camco 4943 Ultra Low Watt Density Water Heater Element Camco 2723 Low Watt Density Water Heater Element
Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Best when water has high mineral content. Withstands dry firing. Heats in lime and sand buildup that would burn out ordinary elements. Highest grade nickel and chromium incoloy alloy. Ultra low-watt density (50 watts per square inch). UL & CSA listed. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Watts 374A Boiler Pressure Relief Valve Plumer's Pack 07013 Thermodisc Contractor Pack Camco 10183 Water Heater Connector Kit
Used in hot water boiler applications to protect against excessive pressure on all type of hot water heating boiler equipment. Iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Standard pressure setting: 30 psi, pressure range: rated up to 550,000 BTU/hr at 30 psi (2 bar) setting only. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) TOD lower thermostat #08122  (1) TOD upper thermostat #08162. Contains (2) 3/4" NPT  x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll Teflon tape, (2 )3/4" NPT compression adapters, (1) 1/2" x 24" stainless steel gas connector.
Plumer's Pack 07023 Thermostat Contractor Cash Acme U3068FLEX18BVLF Braided Flexible Water Heater Connector Camco 2953 Ultra Low Watt Density Water Heater Element
Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) Apcom style lower thermostat w/protector #07722  (1) Apcom style upper thermostat w/protector #07862. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Cash Acme U3088FLEX18BVLF Braided Flexible Water Heater Connector Nyco NL90380-903206 Low Foam Upholstery Cleaner PUMP CONDENSATE 115V
PUMP CONDENSATE 115V
Our Price: $45.71
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. Cleans and brightens furniture, drapes, upholstery and other water safe fabrics. Low foaming, use with hot water extraction type machines. Powerful, yet gentle and safe deep cleaning action removes embedded dirt and soil from water safe fabrics and fibers. Leaves behind a fresh and clean deodorizing scent. Concentrated formulation
Nyco NL90401-903206 Floor Polish Flo Control QUIK-FIX Expansion Pipe Repair Coupling POLISH FLOOR VINYL NO-WAX 32OZ
Repairs and restores, leaving a brilliant self-polishing shine on resilient tile, vinyl and hard flooring surfaces. Hard, durable finish. Resists scuffs and marks. Easy to apply, fast drying. Repairs and restores the look and appearance of all floors. Use as a seal on freshly stripped floors or as a top coat to keep floors looking their best. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Restores the shine on no-wax vinyl floor surfaces that have become dull and worn over time. Easily applied, fast drying formulation. Brilliant clear gloss, will not yellow or discolor floors. The durable shine is maintained even after repeated washings. Resists marking. Prolongs the life of the floor. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction.
FINISH FLOOR GLOSS 32OZ       Watts 1156F Feed Water Pressure Regulator SEALER/FNSH FLR DUAL ACRY 32OZ
Super high gloss seal and finish for all resilient tile, vinyl and hard flooring surfaces. Easy to apply, fast drying. Brilliant, clear, long lasting shine. Repairs and restores the look and appearance of floors. Resists marking in high traffic areas. Use as a seal on freshly stripped floors or as a top coat to keep floors looking their best. Maintains high shine, gloss and appearance of all hard floors. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction. For use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Maximum Pressure: 100psi (6.9 bar). Seals and finishes resilient tile, vinyl, terrazzo and other hard surfaces. Provides a hard high gloss shine on any floor. Use as a top coat to restore the shine to worn floors, or use as a sealer and finish on stripped floors. Clear protective finish will not yellow or discolor floors. Durable and resistant to scuffs and black marks. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction.
Nyco NL90401-900104 Floor Polish Nyco NL90433-900104 Floor Sealer/Finish Nyco NL90422-900104 Reflections Floor Finishes
Repairs and restores, leaving a brilliant self-polishing shine on resilient tile, vinyl and hard flooring surfaces. Hard, durable finish. Resists scuffs and marks. Easy to apply, fast drying. Repairs and restores the look and appearance of all floors. Use as a seal on freshly stripped floors or as a top coat to keep floors looking their best. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction. Seals and finishes resilient tile, vinyl, terrazzo and other hard surfaces. Provides a hard high gloss shine on any floor. Use as a top coat to restore the shine to worn floors, or use as a sealer and finish on stripped floors. Clear protective finish will not yellow or discolor floors. Durable and resistant to scuffs and black marks. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction. Super high gloss seal and finish for all resilient tile, vinyl and hard flooring surfaces. Easy to apply, fast drying. Brilliant, clear, long lasting shine. Repairs and restores the look and appearance of floors. Resists marking in high traffic areas. Use as a seal on freshly stripped floors or as a top coat to keep floors looking their best. Maintains high shine, gloss and appearance of all hard floors. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction.
Flo Control QUIK-FIX Expansion Pipe Repair Coupling Camco 08421 Water Heater Valves Nyco NL90427-903206 Marble/Stone Restorer
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. 4" water column, 1-1/4" shank length, 1/2" NPT gas inlet by 1/2" inverted flare outlet, adjustable 70-160 degrees. Designed for use on interior marble, stone, granite, terrazzo and other hard surface floors. Seals, polishes and protects in a single step. Restores the natural beauty of marble, granite and stones that have become dull and worn. Protects surfaces from staining. Floors and surfaces are easier to clean. Meets or exceeds ASTM D-2047 for slip resistance greater than 0.5 coefficient of friction.
Nyco NL90429-903206 Wood Floor Polish Camco 08401 Natural Gas Valve POLISH FLOOR WOOD 128OZ
Water based formula for use on sealed interior wood floors. Beautifies and restores appearance, adds a layer of protection to wood floors. Mark, scuff and scratch resistant. Use on sealed wood floors that have become dull and worn over time. No solvent odors, lower VOC?s than oil based sealers. Durable, long lasting gloss and shine. Adjustable 70 to 160 degrees F.  42,000 BTU. 4" water column. 1-1/4" shank length. 1/2" NPT gas inlet by 1/2" inverted flare outlet. Water based formula for use on sealed interior wood floors. Beautifies and restores appearance, adds a layer of protection to wood floors. Mark, scuff and scratch resistant. Use on sealed wood floors that have become dull and worn over time. No solvent odors, lower VOC?s than oil based sealers. Durable, long lasting gloss and shine.
PUMP LAWN PORT 1HP STAINLESS  Simer 2825SS Non-Submersible Utility Pump Sta-Rite Industries FP5172-08 Flotec
PUMP SPRINKLER 1.5HP
Our Price: $289.14
Powerful 1 HP fan cooled, 115 volt motor. Corrosion resistant stainless steel housing. Integral carry handle for portability. Convenient on/off switch. 1? NPT Suction and discharge. 165? total dynamic head. Pressure up to 72 psi. Garden hose adapters included.B 115v, 5.2 AMP, 72 psi maximum pressure, 830 gph max flow rate, 1 year warranty from Superior Pump. Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats, and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gallons per minute. Pressures to 80 PSI, suction lifts to 20'. Continuous duty rated, 1 HP, 115V motor. Stainless steel pump housing with excellent self-priming capability. 1" threaded suction and discharge, garden hose fitting and 6' power cord included. Fiberglass reinforced thermoplastic pump housing for the highest corrosion resistance. Superior performance at depths to water of 20' or less. Ready to install 230 volt, heavy-duty motor. Self-priming after pump housing is initially filled, protects against overheating. 1-1/2 HP pumps up to 67 gallons per minute. 2 HP pumps up to 69 gallons per minute. CSA certified.
Franklin Electric RLSP-200 Red Lion Sta-Rite 3075SS Simer - Ace In The Hole WATER HEATER NATGAS TALL 40GAL
Ideal for use in underground or above ground lawn sprinkling systems, garden irrigation, boosting household water pressure, and recirculation of large volumes of water. Heavy-duty cast iron pump housing engineered for high-efficiency. 115/230 volt heavy duty motor with voltage selector allows for simple connection to existing power source. Self-priming design - after initial fill, no additional priming required during operation. 89 GPM. Total home water pressure booster system. 3/4 HP - maximum pumping capacity to 24 GPM. Maximum additional pressure - 40 PSI. Fully automatic system increases and maintains household water pressure - enjoy better showers, cleaning, sprinkling and more. Assemble, ready to install. Includes 6' 115V power cord. 1" female NPT intake and 1" male NPT discharge pipes. CSA certified. Meets or exceeds NAECA requirements.
WATER HEATER NAT GAS 29GALLON WATER HEATER N-GAS SHORT 40GAL WATER HEATER N-GAS SHORT 30GAL
Meets or exceeds NAECA requirements. Meets or exceeds NAECA requirements. Meets or exceeds NAECA requirements.
WATER HEATER 50 GALLON TALL NG WATER HEATER 50 GALLON TALL LP WATER HEATER TALL LP 30GALLON
Meets or exceeds NAECA requirements. Meets or exceeds NAECA and ASHRAE requirements. Meets or exceeds NAECA and ASHRAE requirements.
WATER HEATER LP TALL 40GALLON WATER HEATER LP SHORT 40GALLON WATER HEATER MHM TL NG/LP 29G
Meets or exceeds NAECA and ASHRAE requirements. Meets or exceeds NAECA and ASHRAE requirements. Dual-Fuel mobile home water heater features a low-input pilot to help conserve energy. Suitable for use in manufactured housing with a convertible control that enables the water heater to be used with either natural or LP gas and is easy to install thanks to the side-mounted temperature and pressure-relief valve and cold-water inlet and includes a piezo ignition system for no-match lighting.  Meets or exceed NAECA and ASHRAE requirements
WATER HEATER MHM TL NG/LP 40G WATER HEATER 75 GALLON TALL NG Richmond 6GR40PVE2-40 Round and Tall Gas Water Heater
Dual-Fuel mobile home water heater features a low-input pilot to help conserve energy. Suitable for use in manufactured housing with a convertible control that enables the water heater to be used with either natural or LP gas and is easy to install thanks to the side-mounted temperature and pressure-relief valve and cold-water inlet and includes a piezo ignition system for no-match lighting.  Meets or exceed NAECA and ASHRAE requirements Provides ample hot water for households with 5 people.  Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor.  The water heater has a 6-Year tank warranty and meets or exceeds NAECA and ASHRAE requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements.
Richmond 6GR40PVE2-36P Tall Gas Water Heater HEATER WTR MHDV TL NG/LP 30GAL Richmond 6GR50PVE2-42 Round and Tall Gas Water Heater
Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements. 30,000 BTU Natural Gas/Liquid Propane Water Heater has a direct vent design that offers installation versatility. UL approved for manufactured housing, the heater has a low-input pilot that conserves energy and a factory installed temperature-and-pressure relief valve. Hot/cold water connections are side mounted on the heater for fast, easy installation.  Meets or exceeds NAECA and ASHRAE requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements.
WATER HEAT MHDV TL NG/LP 40GAL Richmond 6GR50PVE2-42P Tall Gas Water Heater Rheem / Richmond RMTGH-95DVLN Water Heater
30,000 BTU Natural Gas/Liquid Propane Water Heater has a direct vent design that offers installation versatility. UL approved for manufactured housing, the heater has a low-input pilot that conserves energy and a factory installed temperature-and-pressure relief valve. Hot/cold water connections are side mounted on the heater for fast, easy installation.  Meets or exceeds NAECA and ASHRAE requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D.
Rheem / Richmond RMTGH-95DVLP Water Heater Rheem / Richmond RMTGH-95XLN Water Heater Rheem / Richmond RMTGH-95XLP Water Heater
For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D.
   
 
1