Home > HOUSEWARES
Choose a sub category:
CLEANING SUPPLIES KITCHENWARE HOUSEHOLD PRODUCTS
Sort By:
1
Elkhart 32414 2-Hole Tube Strap B and K Industries P01-050HC Baby J-Hook B and K Industries P01-075HC Baby J-Hook
Contractor Pack - Bagged ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
B&K G13-100HC 2-Hole Pipe Strap B and K P28-050HC Pipe Clamps B and K Industries P01-100HC Baby J-Hook
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
B&K G13-038HC 2-Hole Pipe Strap B&K C13-100HC 2-Hole Pipe Strap B and K P28-075HC Pipe Clamps
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation.
B and K Industries G65-050HC Clevis Hanger B&K G13-125HC 2-Hole Pipe Strap B&K C13-125HC 2-Hole Pipe Strap
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use.
B&K G13-050HC 2-Hole Pipe Strap B&K C15-125HC Nail B&K C13-150HC 2-Hole Pipe Strap
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. B&K Nail, 1-1/4 in, Copper, Plated Steel Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use.
B&K P20-100HC Perforated Hanger Tape B and K Industries P25-050HC Pipe Clamp B&K G20-124HC Pipe Strap
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.
B&K C13-050HC 2-Hole Pipe Strap B and K P25-075HC Pipe Clamps Elkhart 32428 2-Hole Tube Strap
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Contractor Pack - Bagged
B&K G80-038HC Plate Connector 3/8 in B and K Industries P24-050HC Pipe Clamps B&K G20-128HC Pipe Strap
Galvanized malleable iron top plate connector used to connect split ring hangers with a 3/8" all thread rod. Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Galvanized steel 28 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Lightweight steel.
B&K C13-075HC 2-Hole Pipe Strap Elkhart 32424 2-Hole Tube Strap B and K P24-075HC Pipe Clamps
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Contractor Pack - Bagged Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
Elkhart 32426 2-Hole Tube Strap B and K G72-050HC Split Ring Hangers B and K G72-075HC Split Ring Hangers
Contractor Pack - Bagged B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Galvanized B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Galvanized
B&K G60-038HC Beam Clamp B & K Industries P27-075HC Pipe Insulator B & K Industries P27-050HC Pipe Insulator
Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist. Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration. Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration.
B&K G13-150HC 2-Hole Pipe Strap B&K G13-075HC 2-Hole Pipe Strap B and K Industries C23-050HC J-Hook
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Provides quick nail support.
B&K C13-200HC 2-Hole Pipe Strap Worldwide Sourcing TWC0534-3L Hanger Iron B and K P24-100HC Pipe Clamps
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Galvanized finish. 3/4" x 10' Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
B and K G72-100HC Split Ring Hangers B&K G13-200HC 2-Hole Pipe Strap B&K G60-050HC Beam Clamp
B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Galvanized Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist.
B and K Industries P28-100HC Pipe Clamp B and K Industries G65-075HC Clevis Hanger B and K V30-150HC Pipe Hangers
Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B and K Industries G65-100HC Clevis Hanger B and K Industries G10-050HC Pipe Hook B&K G18-050HC 1-Hole Pipe Strap
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas.
B and K Industries G65-150HC Clevis Hanger B and K Industries G10-075HC Pipe Hook Elkhart 83003 2-Hole Tube Strap
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Contractor Pack - Bagged
B and K Industries P25-100HC Pipe Clamp B&K C22-075HC J-Nail Pipe Strap B and K V30-200HC Pipe Hangers
Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Provides quick nail support. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B&K P20-250HC Perforated Hanger Tape B&K G18-075HC 1-Hole Pipe Strap B and K Industries G10-100HC Pipe Hook
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated.
B and K Industries G65-200HC Clevis Hanger B and K Industries C10-050HC Pipe Hook B and K Industries V30-300HC Pipe Hanger
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
B&K C13-038HC 2-Hole Pipe Strap B and K C10-075HC Pipe Hooks Elkhart 83005 2-Hole Tube Strap
Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Contractor Pack - Bagged
American Valve P600CTS 1/2 CPVC Fitting B and K Industries C10-100HC Pipe Hook B and K V30-400HC Pipe Hangers
For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths.
HOOK J 10PK 1/2IN             B and K G72-125HC Split Ring Hangers KBI SNX Snap-Fix Pipe Repair Coupling
HOOK J 10PK 1/2IN
Our Price: $2.77
B & K Ring Hanger, Split, 1-1/4 in Opening, Malleable Iron, Galvanized NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded.
B and K G72-150HC Split Ring Hangers HOOK J 10PK 3/4IN             Elkhart 83006 2-Hole Tube Strap
HOOK J 10PK 3/4IN
Our Price: $3.12
B & K Ring Hanger, Split, 1-1/2 in Opening, Malleable Iron, Galvanized Contractor Pack - Bagged
B and K Industries 160-203HC CPVC Fitting KBI SNX Snap-Fix Pipe Repair Coupling B and K G72-200HC Split Ring Hangers
CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved. NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. B & K Ring Hanger, Split, 2 in Opening, Malleable Iron, Galvanized
Plumb Pak PP855-8 Pipe Strap Genova 500 Tubing Strap Genova 500 Tubing Strap
3/4'" x 10'. For hanging pipes, fastening faucets and valves, repair jobs and more. Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included. Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included.
Malco 62338-00750 All Purpose Cleaner B&K P20-500HC Perforated Hanger Tape B and K Industries 160-204HC CPVC Fitting
Removes rust, corrosion, hard water deposits, and other tough stains. Use on porcelain and stainless steel sinks, laminate countertops, toilets, tile and grout. Also effective on BBQ grills, hand tools, fiberglass boats, and aluminum doors and windows. Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
American Valve P600CTS 3/4 CPVC Fitting KBI SNX Snap-Fix Pipe Repair Coupling Genova 52105 Tube Hanger
For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
Genova 52107 Tube Hanger Bissell Inc 9351 Upholstery Shampoo B&K C20-124HC Pipe Strap
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling. Loosens and removes tough stains, embedded dirt, and odors from fibers. Formulated to safely deep clean fabric, upholstery and carpet fibers. Non-toxic. Dries quickly. Aerosol. Copper plated 24 gauge strapping with perforated holes to be used for securing any size pipe.  Corrosion resistant, for indoor & outdoor use. Allows custom straps to be fabricated.
Super Iron Out LIO616PN Rust Stain Remover Genova 79716 Pipe Hanger Worldwide Sourcing PMB-424 Pipe Straps
Formulated to cling as it dissolves the toughest rust stains on contact, eliminating the need for scrubbing. This convenient and versatile liquid spray is ideal and safe for use on vertical and hard to reach surfaces like showers, bathtubs, sinks, toilets above the water line, colorfast carpet, tile and many other surfaces. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included. 3/4" x 10'.
Genova 79721 Pipe Hanger B&K G20-524HC Pipe Strap Genova 79731 Pipe Hanger
Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
Whink 01291 Rust Stain Remover Camco 09943 Water Heater Element Wrenches Genova 79741 Pipe Hanger
Liquid rust remover. Quickly removes rust stains from any washable, colorfast fabric or carpeting and from white sinks and toilet bowls.  Safe on pipes and septic systems. Zinc plated element wrenches fit all screw-in elements and 1-1/2" nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can?t. Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
Scotchgard 4101D Fabric Protector Super Iron Out IO30N Rust Stain Remover Camco 11260 Drain Pan With 1 in PVC Fitting
Helps to block stains, so they release with a gentle wash. Won?t change the look, feel or breathability of most fabrics when applied as directed. Ideal for upholstery, clothing, table linens, throw pillows and slip covers. Formulated to easily rinse away the toughest rust stains, eliminating the need for scrubbing. Use in removing and preventing difficult rust stains in bathrooms, kitchens, appliances, laundry, water softener maintenance and many more. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 9973 Quick Change Element Tool Oatey 43789 Dwv Saddle Tee Kit American Valve P600CTS 1 CPVC Fitting
Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained
Genova 61231 Dwv Saddle Tee Camco 11460 Drain Pan With 1 in PVC Fitting Camco 10023 Water Heater Continuity Tester With Battery
Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1-1/2" pipe into its inside diameter. CAN BE GLUED WITH PVC CEMENT. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Test your elements and thermostats while still in the water heater. 1 piece.
Camco 11360 Drain Pan With 1 in PVC Fitting Scotchgard 1023H Triple Action Carpet and Rug Protector Oatey 43791 Dwv Saddle Tee Kit
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Resists soil and stains to keep rugs and carpets clean and new-looking longer. 1 can protects approximately a 9' x 12' area. Aerosol. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings.
Plumb Pak PP855-30LF Saddle Tee B&K G20-1024HC Pipe Strap Camco 11400 Drain Pan With 1 in PVC Fitting
1/2" F.I.P. outlet for 1/2" I.P.  or 3/4" O.D. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
B and K Industries P02-300HC J-Hook Oatey 43795 Dwv Saddle Tee Kit Oatey 43793 Dwv Saddle Tee Kit
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings.
Camco 9953 Professional Element Socket Camco 20800 Drain Pan With 1 in PVC Fitting Camco 20840 Drain Pan With 1 in PVC Fitting
Fits standard 1/2" socket drive to replace screw-in water heater elements. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
B and K P02-400HC J-Hooks Super Iron Out IO65N Rust Stain Remover Camco 20830 Drain Pan With 1 in PVC Fitting
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Formulated to easily rinse away the toughest rust stains, eliminating the need for scrubbing. Use in removing and preventing difficult rust stains in bathrooms, kitchens, appliances, laundry, water softener maintenance and many more. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Rheem / Richmond RP20063 Water Heater Gasket Kit B and K Industries P01-125HC Baby J-Hook B and K P02-150HC J-Hooks
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
Camco 20810 Drain Pan With 1 in PVC Fitting Rheem / Richmond RP20064 Thermocoupler-Gasket Kits B and K Industries P02-200HC J-Hook
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: 24" thermocouple, burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
Thermwell SP57/11C Insulation Blanket B and K Industries C83-075HC Pipe Hanger M-D 04663 Water Heater Insulation Blanket
3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged.
B and K Industries G65-125HC Clevis Hanger B and K Industries C83-100HC Pipe Hanger Whink 01261 Acid Based Rust Stain Remover
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. Liquid rust remover. Quickly removes rust stains from any washable, colorfast fabric or carpeting and from white sinks and toilet bowls.  Safe on pipes and septic systems.
Quick R B5-69 Water Heater Insulation Jacket Camco 20860 Drain Pan With 1 in PVC Fitting Super Iron Out IO10N Rust Stain Remover
Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gallon tank. 2" x 48" x 75" blanket per bag. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Formulated to easily rinse away the toughest rust stains, eliminating the need for scrubbing. Use in removing and preventing difficult rust stains in bathrooms, kitchens, appliances, laundry, water softener maintenance and many more.
B and K Industries C72-038HC Ring Hanger B and K Industries C83-050HC Pipe Hanger Damp Rid PSX20004 Biodegradable Rust Stain Remover
B & K Ring Hanger, Split, 3/8 in Opening, Malleable Iron, Copper Plated Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. Specially formulated to dissolve rust and iron stains on contact. There's no rubbing or scrubbing needed. Dual action formula begins to dissolve even the toughest rust and hard water stains on contact. No mess spray gel sticks to rust stain for maximum cleaning power. Cleans tile, stainless steel, chrome, porcelain, fiberglass glass, concrete, brick and more. Safe for indoor surfaces when used as directed. No harsh fumes. Biodegradable.
DRAIN PAN W/H 32IN ID ALUMINUM B and K C82-050HC Pipe Hangers B and K C72-050HC Ring Hangers
Aluminum pan for gas or electric water heaters, 32" internal diameter, will not rust or crack, PVC fitting included. Mueller Pipe Hanger, Milford, 1/2 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Copper Plated
Whink 01281 Stain Remover B and K C82-075HC Pipe Hangers Eastman 60022/DET-5 Thermal Expansion Tank
Liquid rust remover. Quickly removes rust stains from any washable, colorfast fabric or carpeting and from white sinks and toilet bowls.  Safe on pipes and septic systems. Mueller Pipe Hanger, Milford, 3/4 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar).
B and K C72-075HC Ring Hangers B and K Industries C82-100HC Pipe Hanger B and K Industries C72-100HC Ring Hanger
B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Copper Plated Mueller Pipe Hanger, Milford, 1 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Copper Plated
DRAIN PAN TANKLESS W/PVC FITNG Nyco NL90380-903206 Low Foam Upholstery Cleaner Camco 11231 Water Heater Stand Kit
Includes 1" and 1-1/2" dual size PVC drain fitting. Injection molded for superior strength. Will not rust or corrode. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2".Protect finished areas from water damage. Cleans and brightens furniture, drapes, upholstery and other water safe fabrics. Low foaming, use with hot water extraction type machines. Powerful, yet gentle and safe deep cleaning action removes embedded dirt and soil from water safe fabrics and fibers. Leaves behind a fresh and clean deodorizing scent. Concentrated formulation Stand for gas water heaters from 30 to 50 gallons, constructed of galvanized steel, minimal assembly required, for use with all residential water heaters.  21" x 21" x 18"
DRAIN PAN TANKLESS ALUM W/PVC Eastman 60023/DET-12 Thermal Expansion Tank Abbott Rubber 1240-3000-20 PVC Suction Hoses
For gas or electric water heaters, aluminum will not rust, corrode, or crack. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2". Protect finished areas from water damage. Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar). PVC suction hose assembly for pump intake and agricultural applications.
Intermatic WH40 Water Heater Timers Z-Flex 2SVEDWCF03 Horizontal Condensation Drain Pipe Abbott Rubber 1240-2000-20-CN PVC Suction Hoses
Enclosure: NEMA 1 rated indoor steel in gray finish. Spring hasp, with hole for lock, holds permanently attached, side hinged door closed. Three mounting holes on back plus box mounting holes. 7-3/4" H x 5" W x 3" D. Switch rating: 10,000 W (40 amp) Max 250 volt, 60 Hz. Allows user to shift electricity use to "off-peak" time periods to save utility costs. 3" horizontal condensate drain measuring 9 3/4" in length. For use with Bosch 2400E, 2400ES and 2700ES tankless water heaters. For horizontal vent runs greater than 6'. PVC suction hose assembly for pump intake and agricultural applications.
Bosch Z-Flex Single Wall Z-Vent Water Heater Elbow Sta-Rite FP2735 Parts2O Utility Pump Hose Bosch Z-Flex Single Wall Z-Vent Water Heater Elbow
For use with Bosch 2400E, 2400ES and 2700ES tankless water heaters. 2" Reinforced suction hose. Includes strainer, 2" male and female couplings. For engine drive pumps. 15', non collapsible. For use with Bosch 2400E, 2400ES and 2700ES tankless water heaters.
Rheem / Richmond RTG20220AB Service Valve Kits Abbott Rubber 1240-3000-20-CN PVC Suction Hoses Abbott Rubber 1240-3000-20 PVC Suction Hoses
Supply and service valve kit for use with a tankless gas water heater installation. Clean brass meets the strictest Low lead code requirements. Provides an easy way to flush and service your new tankless water heater. Hot and cold installation and service valves. Includes relief valve and unions. Clean brass for low lead codes. Makes it easy for future service and flushing of tankless water heaters. PVC suction hose assembly for pump intake and agricultural applications. PVC suction hose assembly for pump intake and agricultural applications.
Bosch AQOK Outdoor Vent Kit Superior Pump 93501 Continuous Duty Sewage Pump Ariston GL Glass Lined Electric Water Heater
For outdoor installation of Bosch tankless water heater model # 2700ES (SKU#'s 573.6194, 760.8359) in approved climates. 1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded waterproof power cord, pumps up to 80 gallons per minute, 4800 gallons per hour, bottom intake provides for clog resistant suction, clog-free metal vortex impeller, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 2" solids, 2" female iron pipe discharge thread. Cast aluminum, non-clogging vortex impeller. One year warranty from Superior Pump Co. Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure.
Wayne RPP50 Sewage Pumps Ariston GL Glass Lined Electric Water Heater Richmond 6EP2-1 Electric Water Heater
1/2 HP cast iron submersible sewage pump. Max flow rate is 5700 GPH at 0 ft. Durable, cast iron submersible sewage pump. 2 in. NPT discharge capable of handling up to 2 in. solids. Ideal for basement or below grade installations. Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements.
Sta-Rite FPOS1800LTS Sink Pump System Wayne CSE50TE Sewage Pumps Tsurumi HS Agitator Trash Pump
Under-sink basin system with 1/3 HP sump pump - pumps up to 2880 GPH. Ideal for pumping washing machine, wet bar and air conditioning drainage without an in-ground basin. Heavy-duty 6 gallon structural foam drainage tank. Easy installation - eliminates need for expensive plumbing renovation. CSA certified. Designed for residential and light commercial sewage applications. Ideal for basement or below grade installations. Maximum pumping capacity of 7680 GPH. Cast Iron motor and pump housing. Automatic operation with replaceable piggyback tether float switch. 2" discharge and capable of handling 2" NPT solids. Designed for 18" diameter or larger basins. Handles up to 20 percent of sand, solids, leaves, and debris without clogging. Semi-vortex urethane rubber impeller with shaft mounted agitator suspends solids and allows for pumping of sand and stringy material. Continuous duty, air filled copper wound motor with class B insulation. Built-in thermal protection prevents motor failure due to overloading, accidental run-dry, and single phasing in three phase units. Double inside mechanical seals with silicon carbide faces (both top and bottom) run in an oil filled chamber. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hours provide for extended operational life. 2 year commercial warranty.
Richmond 6EP6-1 Electric Water Heater Superior Pump 93015 Pre-Plumbed Sewage Pump Kit Richmond 6EP10-1 Electric Water Heater
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Pump: 1/2 hp sewage pump (93501), cast iron, tethered, 2" discharge, cast aluminum vortex impeller, 7.6 amp, 10' cord. Includes: 18" x 30" basin, 18" cover, check valve and snap-in plug. Basin features: Structural foam construction, air tight molded reusable pvc, corrosion resistant, 4" inlet hub, 2" discharge and vent, 30 gal capacity, built in torque stops. Check valve features: heavy duty rubber boots, stainless steel clamps, full flow design, 2" connections. Snap-in hub features: heavy duty stainless steel clamp, water & vapor tight seal, fits 4" DWV schedule 40/80 pipe. . 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements.
Sta-Rite FPSE3601A-04 Flotec Sta-Rite Industries E75STVT Sewage Pumps Richmond 6EP20-1 Electric Water Heater
Automatic submersible sewage pump made from rugged cast-iron to maximize pump life. Heavy-duty motor with overload protection provides safe operation. Maximum pumping capacity to 9000 GPH. 2" NPT discharge and 10' power cord.  Requires 18" minimum diameter sewage basin. CSA certified. 115V, 10' cord, CSA and CUS listed, 13500 gph capacity, energy-efficient PSC motor, rust-proof impeller, 2" NPT discharge pipe, 2" maximum solid handling. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements.
WATER HEATER ELEC MED 40GAL   WATER HEATER ELEC TALL 40GAL  WATER HEATER ELEC TALL 30GAL
0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.92 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC MED 30GAL   WATER HEATER ELEC SHORT 36GAL WATER HEATER ELEC SHORT 28GAL
0.90 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER M-HOME ELEC 30GAL Richmond 6EP15-1 Electric Water Heater WATER HEATER ELEC TALL 50GAL
0.92 UEF. Heater features unique side mounted water connections for easier installation and the dual 4.500-watt heating elements provide fast recovery. Made to meet or exceed NAECA requirements 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC MED 50GAL   WATER HEATER M-HOME ELEC 40GAL WATER HEATER ELEC MED 40GALLON
Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.95 Energy Factor. Heater features unique side mounted water connections for easier installation and the dual 4,500-watt heating elements provide fast recovery.  Made to meet or exceed NAECA requirements, this efficient heater has an automatic thermostat that makes it easy for you to control precisely the temperature of the water.  Meets or exceed NAECA and UL requirements. 0.93 Energy Factor. Meets or exceeds NAECA and UL requirements. Medium profile allow this water heater to fit into spaces a taller model won't while increasing ease of installation.
WATER HEAT 30GAL POU ELEC 240V WATER HEAT 30GAL POU ELEC 120V WATER HEATER ELEC MED 50 GAL
0.95 Energy Factor. Point-of-Use water heater has a compact design that can provide an adequate supply of hot water for a single application. The water heater includes a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation. 0.95 Energy Factor. Point-of-Use water heater has a compact design that can provide an adequate supply of hot water for a single application. The water heater includes a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation. 0.93 Energy Factor. Meets or exceeds NAECA and UL requirements. Medium profile allow this water heater to fit into spaces a taller model won't while increasing ease of installation.
WATER HEATER ELEC SHORT 47GAL Thetford 38700 Toilet ENGINE SEMI TRASH PUMP 4HP
Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. ALL COMPONENTS SOLD SEPARATELY. Rear discharge toilet and macerating pump system allows for an additional bathroom in a location with no under-the-floor plumbing. Macerator Pump Specifications 18.5" (470 mm) W x 11.5" (290 mm) h x 7" (175 mm), GPM: Max 60 (227 liters), .8 HP, 8A at 120V, 600W, 22 lbs (10 kg). Pump:980-4287. Round Bowl: 980-4303. Elongated Bowl: 980-4295. Tank: 980-4311. 4RLAG-2H Aluminum Water Transfer Pump. Powered by Commercial grade Honda GX120 engine. Durable cast iron semi-open style impeller. Lightweight aluminum casing includes HD roll frame. Self-priming to 25' of suction lift. Built-in check valve. EPA certified. 2" MNPT inlet and discharge.Max head 59 ft. Max flow 143 GPM.
Richmond 8TV40-2 Double Element Table Top Electric Water Heater Richmond MR50245 Round and Tall Electric Water Heater Tsurumi EPT3 Portable Trash Pump
6-year limited warranty on tank and parts. Dual 4500 watt heating elements for faster recovery, patented resistor design heating elements prolong anode rod and tank life, porcelain enamel top is durable and provides added work area in kitchen installations, compact design permits water heater to fit snugly against wall, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Dia:25",Ht:36" WtrCnHt:33" Lifetime limited tank warranty, 6-year limited parts warranty. Seamless, blow-molded, polybutene tank ? impervious to rust and corrosion, multiple layers of filament wound fiberglass give the tank unmatched strength, polyurethane insulation helps reduce energy consumption. Pipe wrap energy saving kit included to achieve maximum energy savings, recessed drain valve is out of the way of brooms and scrubbers, tough molded polyethylene outer shell resists dents and scratches, bowl shaped bottom allows complete sediment draining, high temperature polysulfone dip tubes, thermally fused upper element provides protection against "dry-firing", titanium lower element for superior resistance to lime build-up, factory installed conduit between element control boxes, all plastic tank eliminates the need for an anode rod, factory installed temperature and pressure relief valve, factory installed vacuum relief valve. Compact, reliable design. Heavy-duty Honda gas engine with oil sensor. High chrome impeller, cast iron volute casing, and stainless steel wear plate. Silicon carbide mechanical seal. Galvanized steel hose couplings provide increased durability and decreased maintenance. Durable rolled-steel frame provides pump/engine with maximum protection, ease of handling or transport, and safe operation. Pump/engine set mounted to cage frame on rubber vibration cushions to buffer stress and wear. 2 year commercial warranty.
HEAT PUMP 50GAL 10YR HYBRID   Tsurumi EPT3 Portable Trash Trash Pump HEAT PUMP 80GAL 10YR HYBRID
Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included. Compact, reliable design. Heavy-duty Honda gas engine with oil sensor. High chrome impeller, cast iron volute casing, and stainless steel wear plate. Silicon carbide mechanical seal. Galvanized steel hose couplings provide increased durability and decreased maintenance. Durable rolled-steel frame provides pump/engine with maximum protection, ease of handling or transport, and safe operation. Pump/engine set mounted to cage frame on rubber vibration cushions to buffer stress and wear. 2 year commercial warranty. Rental. Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included.
   
 
1