Home > HEATING & COOLING > VENTING & FANS > FANS > BOX FANS
Choose a sub category:
DISCHARGE HOSES SUCTION HOSES HOSE COUPLINGS
GASKETS / WASHERS HOSE ACCESSORIES / TOOLS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps Carpet Fresh 275149 Carpet and Room Deodorizer Danco 80787 Round Hose Washer
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Helps eliminate odors trapped in carpets. Honeysuckle fragrance. 14 ounce. 5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick.
Danco 80070 Hose Washer With Screen Arm & Hammer 11448 Carpet and Room Pet Deodorizer American Valve P600U 1/2 PVC Fitting
5/8" hose size: 9/16"ID x 1"OD. The power of baking soda and oxi clean dirt fighters absorbs odors and removes dirt from smoke, mold, and mildew. Easy pet hair pick up. Does not remove carpet stains. Leaves behind a pleasant fragrance for long lasting freshness. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
Worldwide Sourcing TC-15 Flexible Test Caps Worldwide Sourcing PMB-455-3L Lint Traps Fernco PQC-101 Qwik Caps
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. 2--piece. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
American Valve P600U 3/4 PVC Fitting Plumb Pak PP850-15 Filter Hose Washer With Screen Amrep ZUHTC32 Zep Carpet Cleaner
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Plumb Pak Filter Hose Washer, 3-3/4 in Height X 1-7/8 in Width Convenient, general use carpet spotter. Removes deep stains. Enzyme action eliminates odors. Specially formulated for high traffic areas.
Worldwide Sourcing TC-2 Flexible Test Caps Plumb Pak PP820-46 Lint Trap With Twist Tie American Valve P230 1/2 PVC Fitting
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Plumb Pak Lint Trap, 10 in Height X 7 in Width, Nylon, Plastic Mesh AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Flo Control QUIK-FIX Expansion Pipe Repair Coupling KBI Flo Control ProGuard Tube To Pipe Adapter Fernco PQC-102 Qwik Caps
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Super Pet 280020 Carpet Refresher WD-40 280037 Carpet Refresher Oatey 33400 Mechanical Test Plug
Foam breaks up in minutes, leaving carpet dry while trapped-in odors are eliminated. No vacuuming needed. Long-lasting fragrance leaves room smelling fresh and clean. 10.5 oz. can. Foam breaks up in minutes, leaving carpet dry while trapped-in odors are eliminated. No vacuuming needed. Long-lasting fragrance leaves room smelling fresh and clean. 10.5 oz. can. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Danco 36333B Round Hose Washer American Valve P230 3/4 PVC Fitting KBI Flo Control ProGuard Tube To Pipe Adapter
5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick. AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Worldwide Sourcing TC-3 Flexible TestCaps Flo Control QUIK-FIX Expansion Pipe Repair Coupling Flo Control QUIK-FIX Expansion Pipe Repair Coupling
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
Flo Control CCC-0500 Tube Coupling American Valve P600U 1 PVC Fitting Plumb Pak PP2082044 Lint Trap With Twist Tie
Flo Control Tube Coupling, 1/2 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. With twist tie.
Fernco PQC-103 Qwik Caps Oatey 33401 Mechanical Test Plug NDS CPT-0500-S PVC Compression Run Tees
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
KBI Flo Control ProGuard Tube To Pipe Adapter NDS CPT-0500-T PVC Compression Run Tees Plumb Pak PP820-44 Lint Trap With Twist Tie
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified With twist tie.
American Valve P600U 1 1/4 PVC Fitting Flo Control CCC-0750 Tube Coupling Worldwide Sourcing TC-4 Flexible Test Caps
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Flo Control Tube Coupling, 3/4 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Bissell Inc 79B91 Little Green Carpet/Upholstery Cleaner Woolite Heavy Traffic 0820 Carpet Cleaner Fernco PQC-104 Qwik Caps
For all types of carpet fibers, upholstery, auto interiors and more. Cuts through and lifts spots, spills and soils leaving fibers clean. Deodorizes and refreshes fibers with light, scent. Formulated for all Bissell Portable small-area, Deep Cleaning Machines, for the Little Green and SpotLifter. 2 times little green formula. Formulated with acrylic polymers to help repel dirt and stains. Dissolves and lifts out gritty and greasy ground-in dirt with penetrating dual-action foam. FibraPure odor eliminator technology eliminates tough odor by helping to prevent the release of malodor molecules into the air. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Oatey 33402 Mechanical Test Plug Reckitt Benckiser 1920078033 Resolve Carpet Cleaner Resolve 1920000619 Carpet Cleaner
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Specially formulated to solve tough pet stain and odor problems on carpets. Removes tough pet stains like urine, vomit, feces, and pet tracks. The powerful Odor Stop discourages pets from resoiling the same area. It also works great on everyday stains like red wine, grape juice, and greasy food. Safe to use around pets and kids. Effective and safe stain removal for carpets. For tough spots and heavy traffic areas. Aerosol.
Resolve 1920000601 Triple Oxi Advanced Carpet Stain Remover CLAMP HOSE STL ASSORTMENT 40PC NDS CPT-0750-S PVC Compression Run Tees
Penetrates, breaks down and lifts out. Removes stains such as red wine, food grease, pet stains, coffee, mud, ink, tea, dirt, cola, fruit juice, dirty motor oil and more. Trigger Spray. All the popular sizes in one convenient kit for use in securing hoses around pipes and for automotive uses, Worm gear type, Zinc-plated to resist rust and corrosion, Comes in a re-sealable divided PVC storage case. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
NDS CPT-0750-T PVC Compression Run Tees Oatey 33403 Mechanical Test Plug American Valve P230 1 PVC Fitting
NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
Danco 36335B Hose Washer American Valve P600U 1 1/2 PVC Fitting American Valve P600U 2 PVC Fitting
5/8" hose size: 9/16"ID x 1"OD. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
NDS CPT-1000-S PVC Compression Run Tees NDS CPT-1000-T PVC Compression Run Tees VALVE GARDHOSE 1/2PEX X 3/4MH
Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Reckitt Benckiser 1920083262 Resove Carpet Cleaner Mintcraft HCMAN06 Hose Clamps Mintcraft HCMAN04 Hose Clamps
Resolve Pet High Traffic Foam has a unique cleaning and protective formula to help make cleaning large areas of carpet and upholstery easier. Powerful Odor Stop Technology. Eliminates pet odors, freshens with a light, clean scent, discourages pet resoiling, and protects against dirt and pet stains while leaving carpet plush. Makes cleaning easier and helps prevent future soils from setting deep into carpet fibers and upholstery fabrics. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp Danco 36334B Oval Hose Washer KBI Flo Control ProGuard Tube To Pipe Adapter
Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing. 5/8" hose size: 13/16"ID x 1-3/16"OD x 1/8" thick. Bagged. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Watt P-683 Push Fit Angle Stop Valve Amrep ZUCEC128 Zep Carpet Shampoo Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Economical, concentrated extraction detergent. Provides deep cleaning with low foam. Makes up to 25 gallons. Fresh Fragrance. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
Amrep ZUHTC128 Zep Carpet Cleaner Quarter Master 102-209 Replacement Washing Machine Valve Quarter Master 102-210 Replacement Washing Machine Valve
Convenient, general use carpet spotter. Removes deep stains. Enzyme action eliminates odors. Specially formulated for high traffic areas. 125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged. 125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged.
Amrep ZUPXC64 Zep Carpet Shampoo B and K 160-303NL Compression Couplings KBI Flo Control ProGuard Tube To Pipe Adapter
Premium, low foam carpet detergent for extraction machines. Deep cleans carpets. Lifts tough spots and stains. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-3/4 in Length X 2 in Width X 2-1/4 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Flo Control QUIK-FIX Expansion Pipe Repair Coupling Watt P-681 Push Fit Supply Line Valve Mintcraft HCMSS08 Hose Clamps
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCMSS04 Hose Clamps Mintcraft HCRAN06-3L Hose Clamp Mintcraft HCRAN08 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN12 Hose Clamps Mintcraft HCRAN16-3L Hose Clamp Mintcraft HCRAN10 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN24 Hose Clamp Mintcraft HCRAN20 Hose Clamp Mintcraft HCRAN32-3L Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN28 Hose Clamps Mintcraft HCRAN36 Hose Clamps NDS CPT-1250-T PVC Compression Run Tees
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. NDS Pipe Tee, 1-1/4 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 2.67 in Outside Dia, 6-1/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Ideal Tridon 6260450 Worm Gear Hose Clamp Ideal Tridon 6260650 Worm Gear Hose Clamp Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: 6260450, 7/32 - 5/8 in Nominal Opening, NO 4 Trade, 5/16 in Width, 1/4 in Hex Bolt, Grade: 200/300, Stainless Steel Band, 200/300 Stainless Steel Bolt Ideal Tridon Worm Gear Hose Clamp, Series: 6260650, 5/16 - 7/8 in Nominal Opening, NO 6 Trade, 5/16 in Width, 1/4 in Hex Bolt, Grade: 200/300, Stainless Steel Band, 200/300 Stainless Steel Bolt Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing.
Flair-It 16887 Flair-It Washing Machine Valves NDS CPT-1500-T PVC Compression Run Tees B and K 160-304NL Compression Couplings
For hot or cold water. Used for connecting washing machine hose to PEX or Polybutylene tubing. Bar coded. NDS Pipe Tee, 1-1/2 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 3.01 in Outside Dia, 6-3/4 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF.
PEX VALVE WASH 1/2X3/4INMGH   PEX VALVE WASH 1/2X3/4INMGH   Mintcraft HCRAN40 Hose Clamps
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending 1-piece stainless steel housing and band in precision engineered, interlocked construction.
SHAMPOO CARPET PREM 128OZ     Mintcraft HCRAN52 Hose Clamps NDS CPT-2000-T PVC Compression Run Tees
Premium, low foam carpet detergent for extraction machines. Deep cleans carpets. Lifts tough spots and stains. 1-piece stainless steel housing and band in precision engineered, interlocked construction. NDS Pipe Tee, 2 in Nominal Size, Compression x Threaded, 2.41 in Inside Dia, 3.72 in Outside Dia, 7-1/2 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
American Valve P600U 2 1/2 PVC Fitting Flo Control QUIK-FIX Expansion Pipe Repair Coupling Mintcraft HCRAN44 Hose Clamps
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN48 Hose Clamps Mintcraft HCRAN56 Hose Clamps Mintcraft HCRSS10-3L Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS08-3L Hose Clamps Mintcraft HCRSS06-3L Hose Clamps Simmons 450-5 Relief Valve
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Cast brass finish. Pressure only relief valve. Factory preset at 75 psi.
Mintcraft HCRSS12 Hose Clamps Mintcraft HCRSS24 Hose Clamps Mintcraft HCRSS16 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS20 Hose Clamps Mintcraft HCRSS28 Hose Clamps Mintcraft HCRSS32 Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 3/8 - 7/8 in Nominal Opening, NO 6 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 7/16 - 1 in Nominal Opening, NO 8 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1/2 - 1-1/16 in Nominal Opening, NO 10 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1/2 - 1-1/4 in Nominal Opening, NO 12 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 11/16 - 1-1/2 in Nominal Opening, NO 16 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 3/4 - 1-3/4 in Nominal Opening, NO 20 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Mintcraft HCRSS36 Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1 - 2 in Nominal Opening, NO 24 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1-1/4 - 2-1/4 in Nominal Opening, NO 28 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water 1-piece stainless steel housing and band in precision engineered, interlocked construction.
SHOCK ABSORBER WATER SUPPLY   Mintcraft HCRAN64 Hose Clamp Camco 20752 Washing Machine Pans
Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe. 1-piece stainless steel housing and band in precision engineered, interlocked construction. High impact white polypropylene. Includes PVC drain fitting. Bottom or side fitting (not pre-cut).
Homebasix F-1022 Box Fan Mueller 102-207 Dual Washing Machine Shut-Off Valve Mintcraft HCRSS40 Hose Clamp
Homebasix F-1022 Box Fan
Our Price: $17.85
2 speed motor. Simple switch control. Built in carry handle. Compact size, light weight plastic case. Rubber tipped base. Single lever control. Ball valve construction. 3/4" hose thread outlet.Hose threads comply with B1.20.7. Solder ends comply with ANSI B16.18. Threaded ends complhy with ANSI B1.20.1. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN72 Hose Clamps Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRAN80 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS48 Hose Clamp CARPET CLEANER SPRG RENEW 60OZ American Valve P600U 3 PVC Fitting
1-piece stainless steel housing and band in precision engineered, interlocked construction. This carpet cleaning formula removes deep-down dirt and odors from carpets while freshening with a bright spring scent. Dual-action formula deep cleans carpets while adding the scent of Febreze Spring & Renewal. Earth-friendly formula contains no heavy metals, phosphates, or dyes; bottle contains a minimum of 25% postconsumer recycled plastic. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
Camair BX100 Box Fan Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Top mount 3 speed rotary dial. Sleek wave grille design, high performance 5 wing blade. Energy efficient, ergonomic carrying handle, heavy duty steel frame. Durable powder coated paint. Made in USA. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
DRAIN PAN WASHMACH WHITE W/PVC Flo Control QUIK-FIX Expansion Pipe Repair Coupling B and K Industries 160-305NL Compression Coupling
For front-loading machines. High impact white polypropylene. 31" x 35" OD and 29" x 33"ID. 1-1/2" PVC drain. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF.
Mintcraft HCRAN96 Hose Clamps Mintcraft HCRAN88 Hose Clamps Lasko 3733 Portable Box Fan
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Slim-line model for smaller spaces. Steel-body construction. Energy-efficient, high volume air movement. Lightweight. ETL Listed.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRSS56 Hose Clamp Mintcraft HCRSS44 Hose Clamps
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS52 Hose Clamp B and K Industries 160-306NL Compression Coupling Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
American Valve P600U 4 PVC Fitting Mintcraft HCRSS72 Hose Clamps Mintcraft HCRAN104 Hose Clamps
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS64-3L Hose Clamps Mintcraft HCRSS88 Hose Clamps Lasko 3723 Portable Box Fan
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Wide body design, steel box housing with baked enamel finish, 5 paddle blade and plastic grill. 22-1/2"H x 4-3/4"W x 21-1/4"D. ETL Listed.
Mintcraft HCRSS80 Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
1-piece stainless steel housing and band in precision engineered, interlocked construction. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRSS96 Hose Clamps Sunshine Makers 2010000615303 Non-Toxic Pet Stain and Odor Remover
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction. Uses the fast acting natural power of peroxide to destroy pet stains and odors. The formula oxidizes organic soils, permanently removing stains and odors, preventing resoiling and remarking. It is perfect for cleaning accidents and areas where pet odors build up over time. The non-toxic, color-safe formula easily removes urine, feces, dirt and more from floors, carpet, upholstery, crates and bedding, leaving behind only a fresh, pleasant scent.
Sunshine Makers 2010000615311 Non-Toxic Pet Stain and Odor Remover Mintcraft HCRSS104 Hose Clamp STEAM DRYER INSTALLATION KIT
Permanently eliminates new, old and set in stains and odors, preventing re-soiling and remarking. It is perfect for cleaning accidents and areas where pet odors build up over time. The non-toxic formula is safer for use around people and pets. Easily remove urine, feces, scent markings, dirt and more from carpets, floors, upholstery, crates and litter boxes. It can be used in carpet cleaners and as a laundry pre-treat for fabric and bedding. Has a wonderful scent that will leave your home smelling clean and fresh. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Nyco NL90360-903206 Carpet Cleaner/Extractor Bissell Rental 75W5 Carpet Cleaner Pre-Treat
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Deep cleans and deodorizes. Cleans and brightens carpets, rugs and upholstery using hot water extraction type machines.  Powerful deep cleaning action removes embedded dirt and soil from carpet fibers and fabric. Safe to use on stain resistant carpets. Improves deep cleaning effectiveness. Penetrates oily soils and loosens deep carpet stains. Helps remove spot and stains like gravy, coffee and embedded dirt. Great for carpets and upholstery.
Bissell Oxy Deep Pro Carpet Stain Remover CLEANER CARPET/UPHOL CONC 27OZ Nyco NL90320-903206 High Foaming Rotary Shampoo Cleaner
Attacks tough stains below carpet fibers. Permanently removes tough stains like red wine, fruit juice, ink, chocolate and more. Great for carpets and upholstery. Designed to do double duty on your most difficult messes. Formulated to get to the root of the problem, eliminate pet odors, and leave your water-safe surfaces deep-down clean. Safe to use on wool, nylon, and stain-resistant carpet. Requires no rinsing, dries quickly, and is safe for use in all popular carpet cleaning machines. Non-toxic, biodegradable, and Cruelty-Free. Use in rotary and dry foam carpet and upholstery cleaning machines. Highly concentrated formula loosens and lifts soils, encapsulating them in a dry foam oil for easy vacuum removal. Cleans, deodorizes and brightens fibers. Powerful detergents and emulsifiers remove dirt and soil. Neutral pH formulation leaves no harsh chemicals or residue. Safe to use on all fibers.
Sharkbite EB75 Pressure Regulating Valve Bissell Rental 93511 Carpet/Upholstery Cleaner Watts LFN45B Pressure Reducing Valve
Compact iron-body pressure reducing and regulating valve designed for installations where small size and economy are important, and where local codes allow the use of iron body regulators for water service. Intended for use where supply line inlet pressure does not exceed 300 psi. Suitable for either cold or hot water service. Ideal for domestic installations, it automatically reduces and regulates inlet pressure down to the standard factory setting of 45 psi. Features inbuilt back-pass check and fully pressure-balanced piston. Safely cleans upholstery. Removes deep down dirt, stains and odors. Built in fabric-safe brush for easier cleaning. NPT threaded female union inlet x NPT female outlet. Compact, versatile, bronze body construction, with built-in strainer and bypass. For residential and light-duty commercial water pressure regulating. Integral stainless steel strainer, removable when bottom plug is removed. Replaceable seat module, serviceable inline. 33 to 180 degrees Fahrenheit temperature range. 400 psi max working pressure. 50 psi standard reducing pressure, adjustable 25 to 75 psi. Bypass feature controls thermal expansion pressure until inlet pressure is above 150 psi. Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); IAPMO Listed.
Nyco NL90310-903206 Carpet Cleaner Defoamer Flo Control QUIK-FIX Expansion Pipe Repair Coupling Nyco NL90361-903206 Carpet Cleaner
Eliminates excessive foam that can interfere with cleaning and operation of carpet cleaning machines. Add defoamer to the return tanks of carpet cleaning machines to improve performance of machine and cleaners. Highly concentrated formulation. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Cleans, brightens, deodorizes, defoams and protects carpets, rugs and upholstery from re-soiling all in one simple step. Revitalizes the appearance and brightens colors of fabrics. Use with hot water extraction machines. Safe to use on stain resistant carpets.  Highly concentrated formulation.
Sharkbite EB45 Pressure Regulating Valve Sunshine Makers 2010000415302 Non-Toxic Pet Stain and Odor Remover Sharkbite EB45 Pressure Regulating Valve
Half-cartridge based pressure reducing and regulating valve with bronze body. Assembled using the double union nuts with the special sharkbite fittings. Sharkbite fittings can be used on copper, PEX and CPVC. Supplied by factory with a standard delivery setting of 45 psi. Can be adjusted fro 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 200 psi. Suited for either cold or hot water service. Features compact pressure reducing and regulating valves, Certified by ASSE Standard1003, Listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge, Instant push-fit connections. Removes tough stains without tough chemicals. The enzyme based formula envelopes soils, loosening and lifting them away to help permanently remove stains and odors. The product penetrates deep making it ideal for carpets, upholstery, bedding and fabric. Odors are eliminated at the source, rather than just masked, discouraging resoiling and remarking. It quickly and easily removes urine, feces, dirt and more, leaving behind only a fresh, pleasant scent. Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge.
CLEANER CARPET EXTRCTOR 128OZ Sharkbite EB45 Pressure Regulating Valve CLEANER CRPT ALL-IN-ONE 128OZ
Deep cleans and deodorizes. Cleans and brightens carpets, rugs and upholstery using hot water extraction type machines.  Powerful deep cleaning action removes embedded dirt and soil from carpet fibers and fabric. Safe to use on stain resistant carpets. Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge. Cleans, brightens, deodorizes, defoams and protects carpets, rugs and upholstery from re-soiling all in one simple step. Revitalizes the appearance and brightens colors of fabrics. Use with hot water extraction machines. Safe to use on stain resistant carpets.  Highly concentrated formulation.
Sharkbite EB45 Pressure Regulating Valve CLEANER CARPET OXY 2X 32OZ    Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge. Powers out tough ground-in dirt and stains. Color safe oxygen boosters work to remove tough stains. Great for carpets and upholstery. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
CLEANER CARPET PET 32OZ       CLEANER CARPET FEBREZE 32 OZ  Bissell Rental 72U81 Carpet Cleaner
Great for pet stains, tracked-in dirt, and tough pet odors. Odor elimination technology. Great for carpets and upholstery. Removes deep down dirt and odors. Use with BigGreen deep cleaning machine and all other deep cleaning machines. Great for pet stains, tracked-in dirt, and tough pet odors. Odor elimination technology. Great for carpets and upholstery.
CLEANER CARPET OXY 2X 52OZ    Bissell Rental 22763 Febreze Freshness Carpet Cleaner CLEANER CARPET SCOTCHGARD 32OZ
Powers out tough ground-in dirt and stains. Color safe oxygen boosters work to remove tough stains. Great for carpets and upholstery. Removes deep down dirt and odors. Use with BigGreen deep cleaning machine and all other deep cleaning machines. Great for heavily soiled areas, underlying odors and stubborn stains. Triple-action formula deep cleans and protects while removing tough odors. Contains Scotchgard.
Sharkbite EB25 Pressure Regulating Valve
Stainless steel body, orange twist-cap eliminates need for wrench adjustment, numerical indicator show pressure without the need of a gauge, single piece cartridge can be removed with valve body remaining in place, Outlet pressure range: 20-90 psi, Maximum temperature: 180 degrees F., Maximum initial pressure: 300 psi.
   
 
1