Home > HEATING & COOLING > VENTING & FANS > BATH FANS & VENTILATION > BATH FAN ACCESSORIES
Sort By:
1
Simmons 1358 Solid Cable Guard With Split Wire Hole American Valve P600CTS 1/2 CPVC Fitting TVM IK00011 Foil Tape
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4" to 6" casing. Easy to use, snap-in wire guide; with split circle wire hole. For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained Made of a special UV metallized polypropylene film, with a high tack acrylic adhesive.
B and K Industries 160-203HC CPVC Fitting Harvey's 044010 Epoxy Putty Worldwide Sourcing NHC-150 No Hub Couplings
CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Worldwide Sourcing FC56-1515 Flexible Couplings American Valve P230 1/2 PVC Fitting Worldwide Sourcing NHC-22 No Hub Couplings
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
KBI Flo Control ProGuard Tube To Pipe Adapter M-D 04929 Pipe Wrap Fernco PNH-150 Flexible Pipe Coupling
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
Worldwide Sourcing TC-150 Drain Pipe Connectors Worldwide Sourcing FC56-22 Flexible Couplings B and K Industries 160-204HC CPVC Fitting
Used to extend, alter or repair any combination of 1-1/4" or 1-1/2"  brass or plastic drain pipes. For above ground use only. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
Worldwide Sourcing NHC-33 No Hub Couplings Fernco PNH-215 Pipe Reducing Coupling American Valve P600CTS 3/4 CPVC Fitting
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained
American Valve P230 3/4 PVC Fitting KBI Flo Control ProGuard Tube To Pipe Adapter B and K Industries 160-602 Pipe Repair Clamp
AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Simmons 1371 Heat Shrink Kits Thermwell SP41X Frost King Fernco PTC-150 Flexible Tube Coupling
Individually packaged splicing kit. Certified lead-free. Heavy duty wall. Includes crimp connectors. Wire sizes: 3-wire 10-12-14.  Sleeve size 3/8" x 3". Stops sweating and dripping on cold pipes. Cuts wasteful heat loos on hot water pipes. The kits consist of a roll of 1/2" thick fiberglass plus a length of plastic vapor barrier overwrap. Quick, easy way to extend, alter or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is is formulated to provide a reliable connection that can be installedin minutes. Carded.
Worldwide Sourcing FC56-215 Flexible Coupling Worldwide Sourcing KJ-020 No Hub Coupling Worldwide Sourcing FC56-15125 Flexible Couplings
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
B and K 160-603 Pipe Repair Clamps Fernco PNH-33 Flexible Pipe Coupling Fernco PDTC150 Drain and Trap Connectors
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Worldwide Sourcing NHC-44 No Hub Couplings Harvey's 044150-12 Epoxy Putty Fernco PNH-22 Flexible Pipe Coupling
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
NDS CPT-0500-S PVC Compression Run Tees Thermwell FV15H Frost King KBI Flo Control ProGuard Tube To Pipe Adapter
Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. 1/8" thick, self adhesive vinyl foam and aluminum foil insulation tape for hot and cold pipes. 2"W  x 15'L. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Fernco 1056 Flexible Pipe Stock Coupling NDS CPT-0500-T PVC Compression Run Tees Worldwide Sourcing 22U-205 Flexible Donut
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Simmons 1235 3-Wire Submersible Splice Kit B and K 160-604 Pipe Repair Clamps B and K 160-605 Pipe Repair Clamps
Compression sleeve for 3 wire.  Wire sizes for 3 wire 10-12-14 submersible cable. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Worldwide Sourcing 22U-139 Flexible Donut Fernco PDTC215 Drain and Trap Connectors Fernco P22U-139 Compression Reducing Donut
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Worldwide Sourcing KJ-005 No Hub Couplings Worldwide Sourcing KJ-009 No Hub Couplings Fernco PNH-44 Flexible Pipe Coupling
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
Fernco 1056 Flexible Pipe Stock Coupling Worldwide Sourcing DTC-150 Drain Pipe Connectors Worldwide Sourcing FT-150 Flexible Trap
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. For above ground use only.
Worldwide Sourcing FC56-33 Flexible Couplings Fernco 1059 Flexible Pipe Coupling Thermwell SP42X/18 Frost King
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. 1" x 3" x 25' Foil-backed fiberglass pipe wrap with vapor barrier. Package covers 17' of 1/2" pipe, 12' of 3/4" pipe or 10' of 1" pipe. Stops sweating and dripping of cold pipes. Cuts wasteful heat loss on hot water pipes.
Fernco 1056 Flexible Pipe Stock Coupling M-D Building Products 02378 Pipe Wrap Tape PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects. NSF rating, signifying it safe for contact with potable water. Works wet or dry.
KBI SNX Snap-Fix Pipe Repair Coupling Worldwide Sourcing 33U-305 Flexible Donut Worldwide Sourcing FC56-44 Flexible Couplings
NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Oatey Fix-It Epoxy Putty Worldwide Sourcing FC56-32 Flexible Couplings NDS CPT-0750-S PVC Compression Run Tees
For sealing, patching and mending compound. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Perfect for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
NDS CPT-0750-T PVC Compression Run Tees Worldwide Sourcing KJ-021 Flexible Coupling Worldwide Sourcing FC56-315 Flexible Couplings
NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco P33U-305 Compression Red Donuts KBI SNX Snap-Fix Pipe Repair Coupling Worldwide Sourcing KJ-018 Flexible Couplings
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
B and K 160-606 Pipe Repair Clamps Worldwide Sourcing DTC-215 Drain Pipe Connectors Fernco 1056 Flexible Pipe Reducing Stock Coupling
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Worldwide Sourcing 44U-405 Flexible Donuts Fernco P22U-205 Compression RedDonuts Fernco P33U-205 Compression Reducing Donut
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Plumb Pak PP840-1 Pipe Repair Clamps Fernco PFT150 Flexible PVC Traps Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling
Adjustable to 3/8"-3/4" I.P.S., 1/2" - 1" copper. Includes nuts, bolts, and gasket. Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. The flexible PVC material adjusts to the pipe's misalignment and installs securely creating a a leak-free connection. Resists freeze damage.  Squeezes to clean; no drain tools or cleaners needed. carded Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems.
Worldwide Sourcing 33U-205 Flexible Donut Worldwide Sourcing 44U-305 Flexible Donut Fernco 1056 Flexible Pipe Reducing Stock Coupling
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Worldwide Sourcing KJ-015 Flexible Couplings Worldwide Sourcing KJ-016 Flexible Couplings B and K 160-608 Pipe Repair Clamps
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
American Valve P230 1 PVC Fitting Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing KJ-014 Flexible Couplings
AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
B and K 160-607 Pipe Repair Clamps Worldwide Sourcing KJ-019 Flexible Couplings Worldwide Sourcing QL-150 Flexible Elbows
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1056 Flexible Pipe Stock Coupling NDS CPT-1000-S PVC Compression Run Tees NDS CPT-1000-T PVC Compression Run Tees
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Worldwide Sourcing 33U-139 Flexible Donut Fernco 1002 Flexible Pipe Reducing Stock Coupling M-D Building Products 04937 Fiberglass Pipe Insulation
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1002 designed for clay to cast iron or plastic. Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier.
Worldwide Sourcing QL-200 Flexible Elbows KBI SNX Snap-Fix Pipe Repair Coupling Worldwide Sourcing FC56-43 Flexible Coupling
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco PQL-150 Flexible Dwv Pipe Elbow Worldwide Sourcing KJ-002 Drain Pipe Connectors
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications.
Worldwide Sourcing KJ-004 Drain Pipe Connectors Fernco 1001 Flexible Pipe Stock Coupling Fernco 1056 Flexible Dwv Pipe Reducing Coupling
Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications. Series 1001 designed for clay to clay. Specially formulated PVC compound positively seals any sewer and drain connection. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco P33U-139 Compression Reducing Donut B and K 160-703 Pipe Repair Clamps Worldwide Sourcing KJ-001 Flexible Couplings
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
B and K 160-704 Pipe Repair Clamps Fernco P44U-405 Compression Red Donuts Fernco PQL-200 Flexible Dwv Pipe Elbow
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Fernco 1060 Flexible Pipe Coupling Fernco 1059 Flexible Pipe Coupling KBI Flo Control ProGuard Tube To Pipe Adapter
Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Worldwide Sourcing 44U-205 Flexible Donut Worldwide Sourcing QT-150 Flexible Tees Worldwide Sourcing KJ-010 No Hub Couplings
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Worldwide Sourcing KJ-008 Flexible Coupling Fernco PQT-150 Flexible Pipe Tee Worldwide Sourcing KJ-006 No Hub Couplings
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco 1056 Flexible Pipe Stock Coupling Worldwide Sourcing 44U-139 Flexible Donut Worldwide Sourcing QT-200 Flexible Tees
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
M-D Building Products 02394 Pipe Wrap Tape Fernco P1056-100 Drain Pipe Connectors Fernco P1056-075 Drain Pipe Connectors
Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
American Valve P600CTS 1 CPVC Fitting Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing KJ-013 Flexible Couplings
For use in general piping applications,using copper tube sized pipe. Easy to operate for instant emergency piping. Piping must be restrained Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1060 Flexible Pipe Coupling Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco PQT-200 Flexible Pipe Tee
Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Worldwide Sourcing KJ-017 Flexible Coupling Worldwide Sourcing KJ-011 Flexible Couplings Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems.
Worldwide Sourcing QL-300 Flexible Elbows KBI Flo Control ProGuard Tube To Pipe Adapter Fernco 1002 Flexible Pipe Stock Coupling
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-3/4 in Length X 2 in Width X 2-1/4 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Series 1002 designed for clay to cast iron or plastic.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco P44U-205 Compression Reducing Donut Simmons 1350 Torque Arrestor
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Fits 1" or 1-1/4" Drop Pipe, Fits 4" to 8" well casing. Supplied with 2 stainless steel clamps.
Fernco P44U-305 Compression Red Donuts B and K 160-705 Pipe Repair Clamps Fernco 1060 Flexible Pipe Coupling
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco PQL-300 Flexible Dwv Pipe Elbow Fernco P44U-139 Compression Reducing Donut Fernco 1056 Flexible Pipe Reducing Stock Coupling
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco 1059 Flexible Pipe Coupling B and K 160-706 Pipe Repair Clamps NDS CPT-1250-T PVC Compression Run Tees
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. NDS Pipe Tee, 1-1/4 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 2.67 in Outside Dia, 6-1/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Worldwide Sourcing KJ-012 Flexible Coupling Fernco 1070 Flexible Pipe Stock Coupling Worldwide Sourcing KJ-007 Flexible Coupling
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1070 designed for polyethylene to plastic pipe. Available in 3", 4", 6", and 8" sizes. Connects corrugated polyethylene drainage and irrigation systems to sewere, drain or DWV plastic pipe. Conforms to ASTM D5926. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
NDS CPT-1500-T PVC Compression Run Tees FAN MINI W/USB4IN RED/BLU/SLVR B and K 160-707 Pipe Repair Clamps
NDS Pipe Tee, 1-1/2 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 3.01 in Outside Dia, 6-3/4 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified 4" High velocity dual powered fan. Assorted Colors: Red/ Blue/ Silver.  AC 120V 60Hz. 360 degree vertical adjustable fan head. Powder coated safety grill for superior durability. Simple on/off rocker switch. Rubber tipped base helps prevent vibration. Single speed setting. Silent wind. Safety grill. Sturdy base. Includes 48 inch USB cord and AC adaptor for powering from your computer or other USB source, or use adaptor for direct AC outlet. ETL + cETLus. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Fernco PBR-64 O-Ring Fernco 1060 Flexible Pipe Coupling NDS CPT-2000-T PVC Compression Run Tees
Provide a quick, simple means of making secure connections between most 4" house pipe and 6" sewer pipe. Meets ASTM C443 and C425. Accepted for use in connecting 4" Cl or plastic house pipe to 6" clay, plastic, concrete or A/C sewer pipe. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. NDS Pipe Tee, 2 in Nominal Size, Compression x Threaded, 2.41 in Inside Dia, 3.72 in Outside Dia, 7-1/2 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Fernco 1059 Flexible Pipe Coupling FAN MINI BLACK 4 INCH 1 SPEED Fernco PQT-300 Flexible Pipe Tee
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. 360 degree vertically adjustable fan head. Precision built, energy efficient motor has a single speed setting. The rubber tipped base helps preserve a vibration free experience and is controlled with a  single on/off rocker switch. Metal blade. Metal powder coated front and rear grille. Size: 6"W x 3-7/8 D"x 6" H. 120V AC 60HZ, 13W. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
B and K 160-708 Pipe Repair Clamps Worldwide Sourcing QT-300 Flexible Tees Abbott Rubber SRHS-200 Round Hole Hose Strainer
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Strainer for pump suction hose, plated steel. Protects pump from unwanted debris. Female NPT Inlet.
Worldwide Sourcing KJ-003 Corrugated Flex Coupling Fernco XJ-150 Flexible Pipe Expansion Joint Coupling Worldwide Sourcing QT-400 Flexible Tees
For specific use underground. Designed with ring stopper on the inside of the coupling to connect corrugated polyethylene drainage pipe and irrigation systems to plastic DWV pipe. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMOPS 109, PS90, & CSA B602. Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Simmons MAB-4 Male Insert Adapter Worldwide Sourcing FC56-64 Flexible Couplings Worldwide Sourcing QL-400 Flexible Elbows
Simmons Male Insert Adapter, 1 in Drop Pipe, 0.3 lb Load Capacity, Red Brass Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1003 Flexible Pipe Coupling Simmons 9486 Insert Fitting Fernco 1056 Flexible Pipe Coupling
Series 1003 designed for clay to asbestos cement fibre or ductile iron. Specially formulated PVC compound positively seals any sewer and drain connection. 1" insert rope adapter. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco PQL-400 Flexible Dwv Pipe Elbow Abbott Rubber UWB1 Whipcheck Cables Simmons AV45 Air Volume Controls
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Secures two hoses together in the event of a hose connection failure. Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45:  80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: 100 Maximum Tank Gallons, 3/8'' FIP. 42 Maximum Tank Gallons, 1/4'' FIP.
Simmons AV100 Jet Pump Air Volume Controls Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco 1056 Flexible Pipe Stock Coupling
Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45:  80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: 100 Maximum Tank Gallons, 3/8'' FIP. 42 Maximum Tank Gallons, 1/4'' FIP. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco XJ-3 Flexible Pipe Expansion Joint Coupling FAN HIGH VELOCITY 9 INCH      Worldwide Sourcing FC56-66 Flexible Couplings
FAN HIGH VELOCITY 9 INCH
Our Price: $20.68
Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak. High Velocity Fan 9" , 180 degree, vertical adjustable fan head, With four rubber foot pads, 3 aluminum blades, 6 feet, 2 prong plug,  black, powder-coated. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Simmons XSS-4 Long Insert Adapter Fernco PQT-400 Flexible Pipe Tee Fernco 1002 Flexible Pipe Reducing Stock Coupling
A53 galvanized grade B hot roll electric weld. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Series 1001 designed for clay to clay. Specially formulated PVC compound positively seals any sewer and drain connection.
Simmons MAB-5 Male Insert Adapter Fernco 1056 Flexible Pipe Reducing Stock Coupling Lasko 505 Breeze Machine Fan
Simmons Male Insert Adapter, 1-1/4 in Drop Pipe, 0.5 lb Load Capacity, Red Brass Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Fan head pivots a full 360 degrees and locks in place for total comfort control. Durable, impact resistant plastic construction. Aerodynamic blade delivers powerful air circulation ideal for smaller places. Fully assembled. ETL Listed.
Air King AKS2 Dual Function Toggle Switch Abbott Rubber JAHN-150 Hose Fog Nozzle SWITCH PRESSURE 20/40PSI
SWITCH PRESSURE 20/40PSI
Our Price: $24.24
Double switch for independent on/off control of two functions. Includes white switch and wall plate. Nozzle, thermoplastic, adjustable pattern, with shut off. Adjusts from straight stream to fog.
Square D FSG2J20CP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J20BP Pumptrol Type FSG Water Pump Pressure Switch Square D Pumptrol Type FSG Water Pump Pressure Switch
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
Square D FSG2J21CP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J21BP Pumptrol Type FSG Water Pump Pressure Switch Square D Pumptrol Type FSG Water Pump Pressure Switch
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
Square D Pumptrol Type FHG Air Compressor Pressure Switch Abbott Rubber JAHN-150-NST Hose Fog Nozzle Square D FSG2J21M4BP Pumptrol Type FSG Water Pump Pressure Switch
Air compressor pressure switch suitable for small electrically driven air compressors, set for Off at 100 PSI. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 20 PSIG. Adjustable Cut out range 40-100 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Nozzle, thermoplastic, adjustable pattern, with shut off. Adjusts from straight stream to fog. Water pump pressure switch factory set to 30-50 PSI.  Suitable for use on all types of pumps including jet, submersible, and reciprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individially boxed.
Square D FSG2J21M1BP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J20M4BP Pumptrol Type FSG Water Pump Pressure Switch Abbott Rubber JBHA-150 Hydrant Adapter
Water pump pressure switch factory set to 30-50 PSI.  Suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes a maintained manual cut-out lever allowing the pump to run on auto or to be turned off. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individially boxed. Water pump pressure switch factory set to 20-40 PSI.  Suitable for use on all types of pumps including jet, submersible, and reciprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Individially boxed. Brass fire hydrant adapter, converts thread type and size.
Abbott Rubber JBHA-075 Hydrant Adapter Air King AKS3 Triple Function Toggle Switch Square D Pumptrol 2-Way Type FHG Air Compressor Pressure Switch
Brass fire hydrant adapter, converts thread type and size. Triple switch for independent on/off control of three functions. Includes white switch and wall plate. Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed.
Square D FHG12J52XBP Pumptrol 2-Way Type FHG Air Compressor Pressure Switch FAN TOWER 28 INCH             Capital Rubber DXVAHW Standard Duty Adjustable Hydrant Wrench
FAN TOWER 28 INCH
Our Price: $27.82
Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Rotary dial control, Compact space saving design, 90 deg oscillation120V- 60Hz 0.45A, ETL & cETL. Fits hydrant nuts up to 1-3/4" pentagon. Built-in spanner for pin and rocker lug couplings.
Abbott Rubber JBHA-200 Hydrant Adapter Fernco 1056 Flexible Pipe Coupling Wayne 66033-WYN1 Jet Pump Pressure Switch
Brass fire hydrant adapter, converts thread type and size. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded.