Home > HEATING & COOLING > VENTING & FANS > RANGE HOODS > RANGE HOODS
Sort By:
1
Frost King FC1 Faucet Cover Harvey's 023015-48 Pipe Joint Compound Harvey 030005-144 Pipe Thread Compound
Insulates outside faucets to help prevent freezing. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS.
American Valve P600U 1/2 PVC Fitting Frost King FC2 Faucet Cover TVM IK00011 Foil Tape
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Insulates outside faucets to help prevent freezing. Made of a special UV metallized polypropylene film, with a high tack acrylic adhesive.
M-D 03939 Cold Weather Faucet Cover Oatey 31229 Great White Lambro 1317 Flexible Dryer Vent Hose
Protects faucets from frigid weather, helps prevent frozen pipes, made from weather resistant rigid foam, easy to install. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Lambro Dryer Vent Hose, Flexible, 3 in Nominal, 8 ft Length, Vinyl, White, Polybag
Worldwide Sourcing NHC-150 No Hub Couplings American Valve P600U 3/4 PVC Fitting Worldwide Sourcing FC56-1515 Flexible Couplings
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Flo Control QUIK-FIX Expansion Pipe Repair Coupling Worldwide Sourcing NHC-22 No Hub Couplings Frost King FC3 Slip-On Faucet Protector
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Insulates outside faucets to help prevent freezing.
Fernco PNH-150 Flexible Pipe Coupling Worldwide Sourcing TC-150 Drain Pipe Connectors Worldwide Sourcing FC56-22 Flexible Couplings
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Used to extend, alter or repair any combination of 1-1/4" or 1-1/2"  brass or plastic drain pipes. For above ground use only. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Harvey's 029035 Pipe Thread Compound Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Worldwide Sourcing NHC-33 No Hub Couplings
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco PNH-215 Pipe Reducing Coupling Plumb Pak PP854-2 Pipe Joint Compound B and K 160-603 Pipe Repair Clamps
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
B and K Industries 160-602 Pipe Repair Clamp Fernco PTC-150 Flexible Tube Coupling Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Quick, easy way to extend, alter or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is is formulated to provide a reliable connection that can be installedin minutes. Carded. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
Lambro 1309 Flexible Dryer Vent Hose Worldwide Sourcing FC56-215 Flexible Coupling Lambro 1303 Industries Vent Hose with Clamp
Lambro Dryer Vent Hose, Flexible, 4 in Nominal, 8 ft Length, Vinyl, White Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Includes hose and 2 plastic clamps. Not recommended for dryer venting or high temperature venting. Polybagged.
Worldwide Sourcing KJ-020 No Hub Coupling Rectorseal 25790 Pipe Thread Sealant Worldwide Sourcing FC56-15125 Flexible Couplings
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco PNH-33 Flexible Pipe Coupling B and K 160-604 Pipe Repair Clamps Flo Control QUIK-FIX Expansion Pipe Repair Coupling
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
Fernco PDTC150 Drain and Trap Connectors Flo Control CCC-0500 Tube Coupling Worldwide Sourcing NHC-44 No Hub Couplings
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Flo Control Tube Coupling, 1/2 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
American Valve P600U 1 PVC Fitting Fernco PNH-22 Flexible Pipe Coupling Thermwell FV15H Frost King
For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. 1/8" thick, self adhesive vinyl foam and aluminum foil insulation tape for hot and cold pipes. 2"W  x 15'L.
Fernco 1056 Flexible Pipe Stock Coupling American Valve P600U 1 1/4 PVC Fitting Worldwide Sourcing 22U-205 Flexible Donut
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Oatey 31230 Great White B and K 160-605 Pipe Repair Clamps Worldwide Sourcing 22U-139 Flexible Donut
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco PDTC215 Drain and Trap Connectors Fernco P22U-139 Compression Reducing Donut Worldwide Sourcing KJ-005 No Hub Couplings
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Flo Control CCC-0750 Tube Coupling Worldwide Sourcing KJ-009 No Hub Couplings Fernco PNH-44 Flexible Pipe Coupling
Flo Control Tube Coupling, 3/4 in Nominal, Compression End, 4 in Length, 150 psi Working, PVC, ASTM D2846, White, 72 deg F, ANSI/NSF 61+372, IAPMO Certified, UPC Compliant, For Irrigation, Pool and Spa Industries Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
Fernco 1056 Flexible Pipe Stock Coupling Worldwide Sourcing DTC-150 Drain Pipe Connectors Brass Craft PS1087 Seal 'N Check Kit
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
Worldwide Sourcing FT-150 Flexible Trap Plumb Pak PP854-1 Pipe Thread Sealant Harvey's 023030 Pipe Joint Compound
Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. For above ground use only. Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Harvey's 025020 Pipe Thread Compound Worldwide Sourcing FC56-33 Flexible Couplings Fernco 1059 Flexible Pipe Coupling
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco 1056 Flexible Pipe Stock Coupling Simmons 31/2OD Standard Water Well Pump Valve M-D Building Products 02378 Pipe Wrap Tape
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Waterproof impregnated lower valve for regular service. Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.
Worldwide Sourcing 33U-305 Flexible Donut Worldwide Sourcing FC56-44 Flexible Couplings Worldwide Sourcing FC56-32 Flexible Couplings
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-021 Flexible Coupling Worldwide Sourcing FC56-315 Flexible Couplings Fernco P33U-305 Compression Red Donuts
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Worldwide Sourcing KJ-018 Flexible Couplings B and K 160-606 Pipe Repair Clamps Worldwide Sourcing DTC-215 Drain Pipe Connectors
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Simmons 1-11/16X5/8 Pump Cup Worldwide Sourcing 44U-405 Flexible Donuts
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco P22U-205 Compression RedDonuts Fernco P33U-205 Compression Reducing Donut Plumb Pak PP840-1 Pipe Repair Clamps
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Adjustable to 3/8"-3/4" I.P.S., 1/2" - 1" copper. Includes nuts, bolts, and gasket.
Fernco PFT150 Flexible PVC Traps Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing 33U-205 Flexible Donut
Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. The flexible PVC material adjusts to the pipe's misalignment and installs securely creating a a leak-free connection. Resists freeze damage.  Squeezes to clean; no drain tools or cleaners needed. carded Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing 44U-305 Flexible Donut Fernco 1056 Flexible Pipe Reducing Stock Coupling Worldwide Sourcing KJ-015 Flexible Couplings
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-016 Flexible Couplings B and K 160-608 Pipe Repair Clamps Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems.
Worldwide Sourcing KJ-014 Flexible Couplings B and K 160-607 Pipe Repair Clamps Worldwide Sourcing KJ-019 Flexible Couplings
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing QL-150 Flexible Elbows Genova Products 80011F ABS-DWV Foam Core Pipe Fernco 1056 Flexible Pipe Stock Coupling
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Simmons 11/4X1/2 Pump Cup American Valve P600U 1 1/2 PVC Fitting American Valve P600U 2 PVC Fitting
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
Worldwide Sourcing 33U-139 Flexible Donut Fernco 1002 Flexible Pipe Reducing Stock Coupling Worldwide Sourcing QL-200 Flexible Elbows
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1002 designed for clay to cast iron or plastic. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Rectorseal 31631 Tru-Blu Rectorseal 23631 T-Plus 2 Worldwide Sourcing FC56-43 Flexible Coupling
Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Harvey's 029048 Pipe Thread Compound Fernco 1056 Flexible Pipe Reducing Stock Coupling Oatey 15420 Pro Dope
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Fernco PQL-150 Flexible Dwv Pipe Elbow Worldwide Sourcing KJ-002 Drain Pipe Connectors Worldwide Sourcing KJ-004 Drain Pipe Connectors
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications. Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications.
Fernco 1001 Flexible Pipe Stock Coupling Fernco 1056 Flexible Dwv Pipe Reducing Coupling Rectorseal 25631 Pipe Thread Sealant
Series 1001 designed for clay to clay. Specially formulated PVC compound positively seals any sewer and drain connection. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Fernco P33U-139 Compression Reducing Donut B and K 160-703 Pipe Repair Clamps Worldwide Sourcing KJ-001 Flexible Couplings
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Oatey 15804 Hercules Pipe Thread Sealant B and K 160-704 Pipe Repair Clamps Lambro 218 Flexible Dryer Vent Hose
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Lambro Dryer Vent Hose, Flexible, 4 in Nominal, 20 ft Length, Vinyl, White
Fernco P44U-405 Compression Red Donuts Fernco PQL-200 Flexible Dwv Pipe Elbow Fernco 1060 Flexible Pipe Coupling
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco 1059 Flexible Pipe Coupling Worldwide Sourcing 44U-205 Flexible Donut Worldwide Sourcing QT-150 Flexible Tees
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-010 No Hub Couplings Worldwide Sourcing KJ-008 Flexible Coupling Fernco PQT-150 Flexible Pipe Tee
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Flo Control QUIK-FIX Expansion Pipe Repair Coupling UL 110224 Flexible Foil Duct Worldwide Sourcing KJ-006 No Hub Couplings
Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. UL 181, Class 1 air connector label for general venting. Multiply design of metalized polyester with 1" pitch steel wire support. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco 1056 Flexible Pipe Stock Coupling Worldwide Sourcing 44U-139 Flexible Donut Harvey's 023045 Pipe Joint Compound
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Worldwide Sourcing QT-200 Flexible Tees M-D Building Products 02394 Pipe Wrap Tape Fernco P1056-100 Drain Pipe Connectors
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
Fernco P1056-075 Drain Pipe Connectors Harvey's 025050 Pipe Thread Compound Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems.
Worldwide Sourcing KJ-013 Flexible Couplings Fernco 1060 Flexible Pipe Coupling Genova Products 80021F ABS-DWV Foam Core Pipe
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco PQT-200 Flexible Pipe Tee Worldwide Sourcing KJ-017 Flexible Coupling
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-011 Flexible Couplings Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing QL-300 Flexible Elbows
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Simmons 2X11/4 Pump Cup Simmons 2X5/8 Pump Cup Fernco 1002 Flexible Pipe Stock Coupling
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Series 1002 designed for clay to cast iron or plastic.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco P44U-205 Compression Reducing Donut Fernco P44U-305 Compression Red Donuts
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
B and K 160-705 Pipe Repair Clamps Oatey 15427 Pro Dope Fernco 1060 Flexible Pipe Coupling
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco PQL-300 Flexible Dwv Pipe Elbow HOSE KIT SUMP PUMP UNIVERSAL  Fernco P44U-139 Compression Reducing Donut
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Work with all pumps with a discharge size of 1-1/4" or 1-1/2". For permanent or temporary use. 24' poly drainage tubing.  Includes 1-1/4" and 1-1/2" adapters with rust resistant hose clamps. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Sta-Rite FP0012-6U-P2 Pump Discharge Hose Kit Fernco 1059 Flexible Pipe Coupling
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead For use with pedestal and submersible sump pumps. 24' x 1-1/4" flexible drain tubing, 1-1/4" and 1-1/2" high-impact NPT barbed adapters,  hose clamp included. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Oatey 15806 Hercules Pipe Thread Sealant B and K 160-706 Pipe Repair Clamps Rectorseal 25551 Pipe Thread Sealant
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Worldwide Sourcing KJ-012 Flexible Coupling Fernco 1070 Flexible Pipe Stock Coupling
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1070 designed for polyethylene to plastic pipe. Available in 3", 4", 6", and 8" sizes. Connects corrugated polyethylene drainage and irrigation systems to sewere, drain or DWV plastic pipe. Conforms to ASTM D5926.
Worldwide Sourcing KJ-007 Flexible Coupling Simmons 8385L Standard Water Well Pump Valve Simmons 3X2 Pump Cup
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Waterproof impregnated lower valve for regular service. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Wayne 56171 Sump Discharge Hose Kit B and K 160-707 Pipe Repair Clamps Flo Control QUIK-FIX Expansion Pipe Repair Coupling
Sump pump discharge hose kit. 24' length. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved.
Fernco PBR-64 O-Ring Fernco 1060 Flexible Pipe Coupling American Valve P600U 2 1/2 PVC Fitting
Provide a quick, simple means of making secure connections between most 4" house pipe and 6" sewer pipe. Meets ASTM C443 and C425. Accepted for use in connecting 4" Cl or plastic house pipe to 6" clay, plastic, concrete or A/C sewer pipe. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained.
Fernco 1059 Flexible Pipe Coupling Fernco PQT-300 Flexible Pipe Tee Simmons 3X1/2 Pump Cup
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
American Granby SPDK15OMHD Discharge Hose Kit Flo Control QUIK-FIX Expansion Pipe Repair Coupling B and K 160-708 Pipe Repair Clamps
Heavy-duty flexible hose for suction or discharge. For permanent or temporary use. Includes 1-1/2" corrugated hose, 1-1/2" male adapter and stainless steel hose clamp. 24' length. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature  - 167 degrees F. Rated up to 150 PSI.
Worldwide Sourcing QT-300 Flexible Tees Worldwide Sourcing KJ-003 Corrugated Flex Coupling Fernco XJ-150 Flexible Pipe Expansion Joint Coupling
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For specific use underground. Designed with ring stopper on the inside of the coupling to connect corrugated polyethylene drainage pipe and irrigation systems to plastic DWV pipe. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMOPS 109, PS90, & CSA B602. Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak.
Worldwide Sourcing QT-400 Flexible Tees Lambro 219L Flexible Dryer Vent Hose Worldwide Sourcing FC56-64 Flexible Couplings
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Lambro Dryer Vent Hose, Flexible, 4 in Nominal, 50 ft Length, Vinyl, White Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing QL-400 Flexible Elbows Fernco 1003 Flexible Pipe Coupling Harvey's 025080 Pipe Thread Compound
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1003 designed for clay to asbestos cement fibre or ductile iron. Specially formulated PVC compound positively seals any sewer and drain connection. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle.
Oatey 15808 Hercules Pipe Thread Sealant Fernco 1056 Flexible Pipe Coupling Lambro 215L Flexible Dryer Vent Hose
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Lambro Dryer Vent Hose, Flexible, 3 in Nominal, 50 ft Length, Vinyl, White
Fernco PQL-400 Flexible Dwv Pipe Elbow American Valve P600U 3 PVC Fitting Harvey's 028005-144 Pipe Thread Compound Display
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. For use in general piping applications,for Sch 40 metal and plastic pipe. Easy to operate for instant emergency piping. Piping must be restrained. For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air, and natural gas. Does not contain lead. Wipes clean from hands. Hang tab tube.
HomeBasix F-1230 Oscillating Table Fan Genova Products 80031F ABS-DWV Foam Core Pipe Rectorseal 25431 Pipe Thread Sealant
3 speed energy saving motor. 90 (degree) full room oscillation. 45 (degree) vertical tilt. Powder-coated safety grill. Push button controls. UL listed for safety. White. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Simmons 31/2X21/4 Pump Cup Flo Control QUIK-FIX Expansion Pipe Repair Coupling Rectorseal 23431 T-Plus 2 Pipe Thread Sealant
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Made of high-impact PVC Type II material in 1-piece cylinder to avoid leaks - no solvent weld necessary. Internal, high-quality, self-lubricating EDPM o-ring for long life and smooth movement. 150-psi pressure rated in all positions. Complies with all applicable ASTM and ANSI standards, NSF Approved. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Oatey 31226 Pipe Joint Compound Fernco 1056 Flexible Pipe Reducing Stock Coupling Wayne 66000-WYN1 Sump Discharge Hose Kit
Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Not for use on plastic threads. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Sump pump discharge hose kit. 24' length.
Fernco 1056 Flexible Pipe Stock Coupling Fernco XJ-3 Flexible Pipe Expansion Joint Coupling Worldwide Sourcing FC56-66 Flexible Couplings
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to mal