Home > HEATING & COOLING > VENTING & FANS > DRYER VENTILATION > DRYER VENT KITS
Sort By:
1
Genova 700 Cellular Core Solvent Weld Dwv Pipe PIPE DWV SCH40 1-1/2X4FT      Genova 700 Cellular Core Solvent Weld Dwv Pipe
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
PIPE DWV SCH40 2X4FT          Genova 700 Pipe Cardel Industries RC2510 Copper Tubing
PIPE DWV SCH40 2X4FT
Our Price: $4.77
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Mueller Coil Tubing, Short, 1/4 in Nominal Size, 10 ft Length, Copper, For General Purpose
DRAIN PIPE PERF FLEX 4INX8FT  DRAIN PIPE SOLID FLEX 4INX8FT Genova 700 Cellular Core Solvent Weld Dwv Pipe
Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
Hancor 04020010H Drain Pipe Hancor HY-PF1-04-0010 Perforated Single Wall Pipe Hancor 04540010H Solid Single Wall Pipe
Perforated 3-hole. 120 degree. CSA approved. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Cardel Industries RC3810 Copper Tubing Genova 700 Pipe Lambro 138 Round Range Hood Transition
Mueller Coil Tubing, Short, 3/8 in Nominal Size, 10 ft Length, Copper, For General Purpose Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). 3-1/4" x 10" to round transition.
Air King GF-06S Grease Filter Air King RF-35S Grease Filter Lambro 1369B Louvered Dryer Vent Kit
Aluminum grease filter for use with QZ2 Series. Aluminum grease filter for use with DS, AV, AR Series. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Lambro 1369W Louvered Dryer Vent Kit Air King RF-34S Odor Filter Genova 700 Cellular Core Solvent Weld Dwv Pipe
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Charcoal odor filter for use with the DS and AV Series. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
PIPE DWV SCH40 3X4FT          Genova 700 Cellular Core Solvent Weld Dwv Pipe Cardel 12033 Copper Tubing
PIPE DWV SCH40 3X4FT
Our Price: $9.13
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
Lambro 1365W Preferred Hood Dryer Vent Kit Lambro 1365B Preferred Hood Dryer Vent Kit Lambro 1359B Louvered Dryer Vent Kit
Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Lambro 122 Round Range Hood Transition Lambro 120 Round Range Hood Transition Lambro 1377W Louvered Dryer Vent Kit
3-1/4" x 10" to round transition. 3-1/4" x 10" to round transition. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
LamaFlex 406W Louvered Dryer Vent Kit Lambro 1373B Preferred Hood Dryer Vent Kit Lambro 1373W Preferred Hood Dryer Vent Kit
Includes: (1) Louvered vent with tail pipe, (1)  laminated duct, (1)trim plate and 2 adjustable nylon clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps.
Air King RF55 Combination Mesh Grease/Odor Filter Lambro 1359W Louvered Dryer Vent Kit LamaFlex 407W Dryer Vent Kit
Combination grease and charcoal odor filter for use with the AD Series. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Includes: (1) Louvered vent with tail pipe, (1)  laminated duct, (1)trim plate and 2 adjustable nylon clamps.
Lambro 1379B Louvered Dryer Vent Kit Lambro 1379W Louvered Dryer Vent Kit Genova 600 Solvent Weld Dwv Pipe
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Specially made to be used inside a 2" x 4" stud wall construction for drain-waste-vent applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Meets ASTM 2949.
Lambro 1375W Preferred Hood Dryer Vent Kit Lambro 1375B Louvered Dryer Vent Kit Cardel RC2520 Copper Tubing
Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Mueller Coil Tubing, Short, 1/4 in Nominal Size, 20 ft Length, Copper, For General Purpose
Genova 700 Solvent Weld Dwv Pipe PIPE DWV SCH40 4X4FT          Cardel Industries 12035 Copper Tubing
PIPE DWV SCH40 4X4FT
Our Price: $12.31
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
Genova 700 Cellular Core Solvent Weld Dwv Pipe Air King E-22A Round Collar Air King CF-06S Combination Mesh Grease/Odor Filter
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Painted steel round 7" collar with damper, (use with QZ, DS, and AV Series). Charcoal odor filter for use with the QZ2 Series.
Lambro 102 Range Hood Elbow Lambro 316W Dryer Vent Kit Lambro 280 Dryer Vent Kit with Spring
For standard 3-1/4" x 10" duct, 90 degree short way. Includes semi-rigid flexible aluminum duct, 4" ring plate, 2 worm gear clamps and preferred hood. Includes aluminum preferred hood, length of UL transition duct, 4" aluminum ring plate and 2 metal tension clamps.
Air King The Advantage AS50 Exhaust Fan Cardel Industries RC3820 Copper Tubing Genova 700 Dwv Cut Pipe
White polymeric grill. One piece polymeric wheel. Plastic collar for 3" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated for ceilings insulated to R-40. UL Listed for installation over a tub or shower on a GFCI circuit. HVI2100 Certified. Grill Dimension: 10" x 9-1/2". Housing Dimension: 7-1/4" x 7-1/4" x 3-3/4". Mueller Coil Tubing, Short, 3/8 in Nominal Size, 20 ft Length, Copper, For General Purpose Used for drain, waste, and vent applications.
Lambro 354R Roof Cap Genova 700 Pipe Cardel Industries RC5010 Copper Tubing
For use with 3" and 4" installations, round. Includes damper, screen and collars. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
Genova 700 Solvent Weld Dwv Pipe Lambro 351G Wall Cap Lambro 313WUL Louvered Dryer Vent Kit
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). For round duct. Damper spring controlled. Removable screen. 1 - 4" white plastic louvered vent with tail pipe. 1 - 4" x 8' semi-rigid transition duct - UL listed. 2 - galvanized worm gear clamps. 1 - trim plate.
DRAIN PIPE PERF FLEX 4INX25FT DRAIN PIPE SOLID FLEX 4INX25FT Lambro 1170W Wall Cap
Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. For standard 3-1/4" x 10" duct. Damper spring controlled.
Lambro 316WUL Preferred Hood Dryer Vent Kit Lambro 4004 Quick Connect Vent Kit Lambro 106R Wall Cap
1 - 4" white plastic preferred hood with tail pipe. 1 - 4" x 8' semi-rigid transition duct - UL listed. 2 - galvanized worm gear clamps.  1 - removable screen. 1 - trim plate. Includes length of flexible aluminum duct, 2 plastic 90-degree elbow, one marked "A" and "B" both with rubber gasket. Rubber gasket secures elbow to dryer or vent hood. No clamp needed. For standard 3-1/4" x 10" duct. Damper spring controlled.
Cardel 12039 Copper Tubing Genova 700 Cellular Core Solvent Weld Dwv Pipe Ultra Seal 289W Dryer Vent Closure
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Heated dryer exhaust air lifts interior floating vent cover. Air escapes out of bottom vent. Keeps hot or cold air out. Keeps birds and other animals outside.
Lambro 109R Roof Cap Cardel 12045 Copper Tubing Genova 700 Dwv Cut Pipe
1-3/4" collar. Includes damper and screen. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Used for drain, waste, and vent applications.
Lambro 116 Roof Cap Genova 700 Pipe Cardel Industries REF-1/8 Refrigeration Copper Tubing
For ducts up to 7" round. Includes damper and screen. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage.
Cardel Industries RC5810 Copper Tubing Air King SP2430W Back Splash Air King SP2430BI Back Splash
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood.
Air King SP2430A Back Splash Genova 700 Cellular Core Solvent Weld Dwv Pipe Air King SP2436W Back Splash
Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood.
Air King The Advantage AS70 Exhaust Fan Air King RCB810 Roof Cap DRAIN PERF FLEX W/SOCK 4X25FT
White polymeric grill. One piece polymeric wheel. Plastic collar for 3" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated for ceilings insulated to R-40. UL Listed for installation over a tub or shower on a GFCI circuit. HVI2100 Certified. Grill Dimension: 10" x 9-1/2". Housing Dimension: 7-1/4" x 7-1/4" x 3-3/4". Roof cap with spring loaded damper and bird screen for 3" or 4" round ducting. Constructed of black ABS polymeric (plastic). Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
Genova 700 Dual Pressure/Drain Waste Vent Pipe Cardel REF-3/16 Refrigeration Copper Tubing Genova 700 Dwv Cut Pipe
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Used for drain, waste, and vent applications.
Genova 700 Dwv Pipe Cardel Industries RC5020 Copper Tubing Genova 700 Solvent Weld Dwv Pipe
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Air King BFQ110 Exhaust Fan Air King BFQ90 Exhaust Fan Air King Advantage ASLC50 Decorative Exhaust Fan/Light
The high performance exhaust fan series feature a unique Snap-In-Installation System. Installs in ceiling. The durable high impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and romex connector. 4" plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions: 10" x 10". One piece polymeric wheel. Rated for ceilings insulated to R-40. cULus Listed. HVI2100 Certified. The high performance exhaust fan series feature a unique Snap-In-Installation System. Installs in ceiling. The durable high impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and romex connector. 4" plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions: 10" x 10". One piece polymeric wheel. Rated for ceilings insulated to R-40. cULus Listed. HVI2100 Certified. One piece polymeric wheel. White polymeric grill.  Dimensions: 11" x 10-1/2". High impact polycarbonate lens. 100 watt maximum, type A19, medium base bulb, (not included). Rated Type IC for ceilings insulated to R-40. Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified. Fan and light can be wired to operate separately.
WALL CAP STEEL BLACK 3.25X10IN Air King BFQ50 Exhaust Fan Genova 700 Dwv Cut Pipe
Air King Range Hood Wall Cap, Suitable For Use With: 3-1/4 x 10 in Ducting, 22 ga, Steel, Galvanized, Black The high performance exhaust fan series feature a unique Snap-In-Installation System. Installs in ceiling. The durable high impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and romex connector. 4" plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions: 10" x 10". One piece polymeric wheel. Rated for ceilings insulated to R-40. cULus Listed. HVI2100 Certified. Used for drain, waste, and vent applications.
Genova 70042B DWV Pipe Cardel Industries REF-1/4 Refrigeration Copper Tubing Air King AK917 Bulb Heater with Exhaust Fan
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. One piece polymeric blower wheel. White polymeric grill. Dimensions: 10" x 10".  One - 250 watt maximum, type R40 bulb, medium base infrared lamp to deliver silent heat to the room, bulb not included. Rated type IC for ceilings insulated to R-40. Plastic collar for 4" duct connection comes complete with built in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified.
Genova 700 Solvent Weld Dwv Pipe Air King Advantage ASLC70 Decorative Exhaust Fan/Light Genova 70042FB DWV Pipe
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). One piece polymeric wheel. White polymeric grill.  Dimensions: 11" x 10-1/2". High impact polycarbonate lens. 100 watt maximum, type A19, medium base bulb, (not included). Rated Type IC for ceilings insulated to R-40. Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified. Fan and light can be wired to operate separately. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
Lambro 107 Roof Cap Cardel Industries RC5820 Copper Tubing Air King BFQ75 Exhaust Fan
For ducts up to 10" round and 3-1/4" x 10". With damper and screen. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. The high performance exhaust fan series feature a unique Snap-In-Installation System. Installs in ceiling. The durable high impact plastic housing ensures quiet operation and maximum performance. Motors are suitable for continuous operation. Includes wire nuts and romex connector. 4" plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. White, polymeric grill. Dimensions: 10" x 10". One piece polymeric wheel. Rated for ceilings insulated to R-40. cULus Listed. HVI2100 Certified.
Genova 700 Solvent Weld Dwv Pipe Air King SP2430SS Back Splash Cardel Industries REF-5/16 Refrigeration Copper Tubing
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage.
Cardel Industries REF-3/8 Refrigeration Copper Tubing Air King SP2436SS Back Splash Air King DRLC702 Decorative Round Exhaust Fan/Light
Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Grill is 13-1/2" diameter. Ribbed frosted glass light lens. 2 - 60 watt maximum, type A19, medium base bulbs, bulbs not included. One piece polymeric wheel. Plastic duct collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated Type IC for ceilings insulated to R-40. UL Listed. HVI2100 Certified.
Air King DRLC703 Decorative Round Exhaust Fan/Light Hancor 03510100 Regular Solid Single Wall Pipe 100 ft Cardel Industries 1/4X60L Copper Tubing
Grill is 13-1/2" diameter. Ribbed frosted glass light lens. 2 - 60 watt maximum, type A19, medium base bulbs, bulbs not included. One piece polymeric wheel. Plastic duct collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated Type IC for ceilings insulated to R-40. UL Listed. HVI2100 Certified. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Air King AKLC701 Quiet Round Exhaust Fan/Light Air King AK927 Dual Lighting Bulb Heater with Exhaust Fan Lambro 101 Range Hood Duct
Decorative bathroom exhaust fan with light includes grill, 13-1/2" diameter with ribbed frosted glass light lens. Two - 60 watt maximum light capacity, bulbs not included. One piece polymeric wheel.  Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Mounted in ceiling. Rated Type IC. UL Listed. HVI Certified. 70 CFM, 2.5 Sones, Size: 10-7/8" L x 9-3/8" W x 7-7/8" H. Oil Rub Bronze. One piece polymeric blower wheel. White polymeric grill. Dimensions: 16-1/2" x 10". Two - 250 watt maximum, type R40 bulb, medium base infrared lamp to deliver silent heat to the room and is rated type IC for ceilings insulated to R-40, bulb (not included).  Plastic collar for 4" duct connection comes complete with built in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified. For standard 3-1/4" x 10" duct.
Hancor 04010100 Perforated Regular Single Wall DWV Pipe 100 ft Hancor 04020100H 3-Hole Channel Flow Perforated Single Wall Pipe 100 ft Air King EWF180 Through the Wall Exhaust Fan
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Perforated 3-hole. 120 degree. CSA approved. Spring loaded aluminum back draft damper prevents drafts from entering back into the room. Metal 8" round diameter housing, vents directly to outside, includes spring-loaded aluminum back draft damper for maximum air flow. Direct to outdoor exhaust design eliminates the need for ducting. White polymeric grill. Dimensions: 11-1/2" x 11-1/2". One piece polymeric wheel. UL Listed. HVI2100 Certified.
Air King Exhaust Fan/Light Air King Quiet AK80 Exhaust Fan Air King DRLC701 Decorative Round Exhaust Fan/Light
Excellent ASHRAE 62.2 ventilation solution. Includes 6 watt, GU24 LED lamp and provides about the equivalent of 100 watts of incandescent lighting. Includes exhaust fan housing, blower (motor), grill, snap-in bracket, and a 4" round duct collar with a plastic damper which protects against back drafts and ensures quiet operation, and instruction sheets. UL Listed for installation over a tub or shower on a GFCI circuit.. At the highest point the grill projects only 1/2" down from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation at the minimum sound. Easily installed using the adjustable hanging brackets for 16" centers. Motors are suitable for continuous operation. 4" plastic duct collar with back draft damper. UL listed for installation over a tub or shower on a GFCI circuit. HVI2100 Certified. Grill is 13-1/2" diameter. Ribbed frosted glass light lens. 2 - 60 watt maximum, type A19, medium base bulbs, bulbs not included. One piece polymeric wheel. Plastic duct collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. Rated Type IC for ceilings insulated to R-40. UL Listed. HVI2100 Certified.
Hancor 04510100 Regular Solid Single Wall Pipe 100 ft Cardel Industries REF-1/2 Refrigeration Copper Tubing Air King Advantage Decorative Fan/Light
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. One piece polymeric wheel. White polymeric grill.  Dimensions: 11" x 10-1/2". High impact polycarbonate lens. 100 watt maximum, type A19, medium base bulb, (not included). Rated Type IC for ceilings insulated to R-40. Plastic collar for 4" duct connection, comes complete with built in non-metallic back draft damper for quiet operation. UL listed. HVI2100 certified. Fan and light can be wired to operate separately.
Air King Deluxe Round Exhaust Fan/Light Hancor 04730100BS Perforated/Wrap Regular Single Wall Pipe 100 ft Genova 700 Solvent Weld Dwv Pipe
Fan with light and 7 watt night light. Moonstone glass lens disperses light evenly throughout the room. Uses up to a 100 watt standard bulb (not inc.) Exhaust fan can be wired to operate separately, plastic damper protects against backdrafts and ensures quiet operation. Easily installs using the included adjustable hanging brackets. 4" duct. HVI Certified. UL listed for installation over a tub or shower on a GFCI circuit. ADS 4" single-wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. The pipe is perforated for subsurface water collection or leaching and wrapped with a non-woven, synthetic wrap material that allows water to flow through, but keeps sand and soil from blocking the pipe. The 100 foot roll of pipe allows installation of long runs with fewer joints. Meets ASTM F405 standards. CSA approved. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Air King AK55L Combination Exhaust Fan Heater Cardel Industries 3/8X60L Copper Tubing Air King AK80H Humidity Sensing Exhaust Fan With Humidity Sensor
Grill dimensions: 17.125"W x 9.875"D. Housing dimensions: 14-5/8"L x 8-3/8"W x 6-1/2"D. Efficiently ventilate 70 sq. ft. bathroom or 85 sq. ft. room. Consists of a heater blower wheel in one-piece metal and a ventilation blower wheel in one-piece polymeric that is electronically balanced. All functions can be wired to operate separately. Ceramic heating element is self-regulating, design provides 1,350 watts. Moonstone glass lens is installed in flip-down lens holder and best functions with a bright 100-watt maximum standard bulb (not included). 4-inch metal duct connection collar with back draft damper. HVI Certified performance. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. 4" duct with damper to protect against backdrafts. Humidity level is adjustable from 10% to 80%. The integrated humidistat senses the humidity of the room and turns the fan on until the humidity level is below the preset level. The fan can also be activated through a wall switch. HVI Certified and UL listed for installation over a tub or shower on a GFCI circuit. Meets California Title 24 requirements and ASHRAE 62.2.
Air King Eco-Exhaust ES130S Exhaust Fan FAN EXHAUST 2LT MED 70CFM WHT Cardel Industries REF-5/8 Refrigeration Copper Tubing
Low profile grill almost disappears into ceiling, and a motor with a large, quiet, centrifugal blower wheel. Provides lowest possible HVI certified sound rating. Install using the 4 included adjustable hanging brackets. Motors are suitable for continuous operation,  6-Inch round duct connector with a spring loaded metal damper. For use over a tub or shower when installed on a GFCI circuit. Side access panel allows wiring fan from inside or outside the housing. Complies with ASHRAE 62.2 the minimum national standard, has three main components: Source Control, Local Exhaust and Whole House Ventilation. Housing size: 12-7/8" W x 12-3/4" D x 9-7/8"H. Decorative grill and glass lens. 4" round duct collar with damper protects against back drafts. Exhaust fan and light can be wired to operate separately. Install using the included adjustable hanging brackets. Utilizes 2 - 26 W medium base energy efficient fluorescent lamps. 60W type A19 incandescent bulbs can also be used. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage.
Air King Deluxe Quiet AK110LS Exhaust Fan Air King Eco-Exhaust ES80S Exhaust Fan Cardel Industries REF-3/4 Refrigeration Copper Tubing
At the highest point the grill projects only 1/2" down from the ceiling. The electronically balanced centrifugal blower wheel assures maximum ventilation with minimum sound. Install using the adjustable hanging brackets for 16" centers. 4" metal duct collar with back draft. Motors are suitable for continuous operation. UL Listed over a tub or shower on a GFCI circuit. HVI2100 Certified. Housing Dimensions: 10-7/8" W x 9-3/8" D x 7-7/8" H. Low profile grill almost disappears into ceiling, and a motor with a large, quiet, centrifugal blower wheel. Provides lowest possible HVI certified sound rating. Install using the 4 included adjustable hanging brackets. Motors are suitable for continuous operation,  6-Inch round duct connector with a spring loaded metal damper. For use over a tub or shower when installed on a GFCI circuit. Side access panel allows wiring fan from inside or outside the housing. Complies with ASHRAE 62.2 the minimum national standard, has three main components: Source Control, Local Exhaust and Whole House Ventilation. Housing size: 12-7/8" W x 12-3/4" D x 9-7/8"H. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage.
FAN EXHAUST 2LT MED 70CFM NKL Cardel Industries 1/2X60K Copper Tubing Cardel Industries 1/2X60L Copper Tubing
Decorative grill and glass lens. 4" round duct collar with damper protects against back drafts. Exhaust fan and light can be wired to operate separately. Install using the included adjustable hanging brackets. Utilizes 2 - 26 W medium base energy efficient fluorescent lamps. 60W type A19 incandescent bulbs can also be used. Used for direct burial, underground water line for the main supply line in the street to base of the house or building. Can also use for plumbing and heating in commercial applications and residential multi-stories or for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
FAN EXHAUST 80CFM LED LT 1-SPD FAN EXHAUST 2LT MED 70CFM NKL FAN EXHAUST 100CFM LED LT 1SPD
Can be installed over a tub or shower on a GFCI circuit. 4" round duct. Includes 6 watt LED bulb. Easily installs using the included adjustable hanging brackets. Housing dimensions 10-7/8"W x 9- 3/8"D x 7-7/8"H. Decorative grill and glass lens. 4" round duct collar with damper protects against back drafts. Exhaust fan and light can be wired to operate separately. Install using the included adjustable hanging brackets. Utilizes 2 - 26 W medium base energy efficient fluorescent lamps. 60W type A15 incandescent bulbs can also be used. Can be installed over a tub or shower on a GFCI circuit. 4" round duct. Includes 6 watt LED bulb. Easily installs using the included adjustable hanging brackets. Housing dimensions 10-7/8"W x 9- 3/8"D x 7-7/8"H.
FAN EXHAUST 3LT MED 70CFM BLK Cardel Industries 3/4X60L Copper Tubing Cardel Industries 3/4X60K Copper Tubing
Decorative grill and glass lens. 4" round duct collar with damper protects against back drafts. Exhaust fan and light can be wired to operate separately. Install using the included adjustable hanging brackets. Utilizes (3) - 26 W medium base energy efficient fluorescent lamps. 60W type A15 incandescent bulbs can also be used. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used for direct burial, underground water line for the main supply line in the street to base of the house or building. Can also use for plumbing and heating in commercial applications and residential multi-stories or for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Cardel Industries 1X100 Copper Tubing
Used for direct burial, underground water line for the main supply line in the street to base of the house or building. Can also use for plumbing and heating in commercial applications and residential multi-stories or for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
   
 
1