Home > HEATING & COOLING > VENTING & FANS > DRYER VENTILATION
Choose a sub category:
DRYER VENT KITS SUMP PUMPS DRYER VENT HOSE/PIPE
SUMP PUMP PARTS & ACCESSORIES DRYER VENT ACCESSORIES UTILITY PUMPS
DRYER VENT HOODS TRASH / SEWAGE PUMPS MISC NON-WELL PUMPS
DISCHARGE & SUCTION HOSES DRILL PUMPS
Sort By:
1
Lambro 284L Worm Gear Clamp Lambro 253 Standard Economy Clamp Genova 300 Cold Water Pressure Pipe 10 ft
Used for secure connection to flexible aluminum duct. Lambro Economy Clamp, Standard, 3 - 4 in, Plastic Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit.
Lambro 2541L Tension Clamp Lambro 283 Dryer Tube Clamp Genova 315057 Solid Wall Cold Water Pressure Pipe 5 ft
Lambro Tension Clamp, 4 in Used for secure connection to flexible aluminum duct. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 31007 Cold Water Pressure Pipe 10 ft Lambro 244 Tubing Connector Lambro 246 Flexible Duct Connector
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. For flexible aluminum duct. For flexible aluminum duct.
Genova 315077 Solid Wall Cold Water Pressure Pipe 5 ft Lambro 2841 Worm Gear Clamp Genova 31010 Cold Water Pressure Pipe 10 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used for secure connection to flexible aluminum duct. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 300 Pipe TVM IK00011 Foil Tape Genova 300 Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Made of a special UV metallized polypropylene film, with a high tack acrylic adhesive. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 315107 Solid Wall Cold Water Pressure Pipe 5 ft Lambro 2676W Dryer Vent Hood
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Includes face only.
Lambro 2677B Hood/Face Lambro 235 Vent Reducer/Increaser Lambro 2300 Adjustable Vent Elbow
Includes face only. Increases from 3" to 4" and reduces from 4" to 3". Lambro Vent Elbow, Adjustable, Suitable For Use With: Duct, 3 in, Aluminum
Lambro 3801 Worm Gear Clamp M-D 04929 Pipe Wrap Genova 30007 Cold Water Pressure Pipe 20 ft
Used for secure connection to flexible aluminum duct. Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 300 Pipe Builders Best 110113 Dryer Vent Hood Lambro 2310 Adjustable Vent Elbow
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Thicker and more durable. 4" x 10.5" Fully assembled, riveted tailpipe, backdraft flapper. Wide mouth for excellent airflow. Lambro Vent Elbow, Adjustable, Suitable For Use With: Duct, 4 in, Aluminum
Thermwell SP41X Frost King Cardel 1/2X2 Copper Tubing Genova 31011 Cold Water Pressure Pipe 10 ft
Stops sweating and dripping on cold pipes. Cuts wasteful heat loos on hot water pipes. The kits consist of a roll of 1/2" thick fiberglass plus a length of plastic vapor barrier overwrap. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 31012 Cold Water Pressure Pipe 10 ft Thermwell FV15H Frost King Genova 30010 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. 1/8" thick, self adhesive vinyl foam and aluminum foil insulation tape for hot and cold pipes. 2"W  x 15'L. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 300 Cold Water Pressure Pipe 20 ft Lambro 1491W Bird/Rod Guard Lamaflex 411 Flexible Tube
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Hinged design for easy cleaning access. Fits over 3" and 4" hoods and louvered vents. UV inhibitor is used to help prevent the premature fading of vent. Aluminum film laminate.
Lambro 250 Vent Increaser Lambro 251 Vent Reducer Genova 300 Pipe
Increases from 3" to 4". Lambro Vent Reducer, 4 X 3 in Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe Thermwell SP42X/18 Frost King
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. 1" x 3" x 25' Foil-backed fiberglass pipe wrap with vapor barrier. Package covers 17' of 1/2" pipe, 12' of 3/4" pipe or 10' of 1" pipe. Stops sweating and dripping of cold pipes. Cuts wasteful heat loss on hot water pipes.
Lambro 1775L Inline Damper Cardel 1/2X2 Copper Tubing M-D Building Products 02378 Pipe Wrap Tape
Prevents outside air from entering the house through the clothes dryer. Easy to install on the existing dryer venting system. For 4" installation. Includes draft blocker body and 2 plastic clamps. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.
Lambro 267B Wall Mount Dryer Vent Hood Lambro 143W Dryer Ventilator Lambro 267W Wall Mount Dryer Vent Hood
Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) ? 4"  plastic louvered vent with 11" tail pipe, (1) ? 4"  plastic trim plate. Under eave vent for bathroom fan and dryer venting. Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) ? 4"  plastic louvered vent with 11" tail pipe, (1) ? 4"  plastic trim plate.
Lambro 3003L Quick Fit Elbow Kit Lambro 344 Dryer Vent Hood PUMP DRILL 3/4IN GHT
Kit for clothes dryer installations. Includes white plastic 90 degree elbow with rubber gasket inside one side and 4" metal worm gear clamp. Opening/closing ?damper prevents outside elements from entering the vent. (1) ? 4? Aluminum preferred hood vent with 11? tail pipe. (1) ? 4? White plastic trim plate. Works with most drills. Easy to install, thermoplastic construction, corrosion resistant steel shaft. Connects to garden hose, 3/4" suction and discharge, maximum drill* speed 1200 rpm, recommended drill chuck size: 3/8" or larger. Drill and garden hose sold separately.
Lambro 361W Dryer Vent Hood Genova 300 Cold Water Pressure Pipe 20 ft Genova Products 80011F ABS-DWV Foam Core Pipe
Includes hood only. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Lambro 302L Flexible Semi-Rigid Duct Pipe Lambro 495P Flexible Laminated Dryer Transition Duct Cardel 3/4X2 Copper Tubing
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. UL listed. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 300 Cold Water Pressure Pipe Cobra 51 Lint Trap Brush M-D Building Products 04937 Fiberglass Pipe Insulation
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Appliance brush cleans dryer lint traps and heating vents. Plastic handle and rigid brush for removing lint and dust blockages. Improves efficiency and saves energy. Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier.
Lambro 224W Dryer Vent Hood Lambro 222W Dryer Vent Hood Lambro 222B Dryer Vent Hood
Plastic face with standard aluminum tailpiece. Plastic face with standard aluminum tailpiece. Plastic face with standard aluminum tailpiece.
P-Tanium 110889 Dryer Vent Hood Lamaflex 412 Flexible Tube Builders Best 10151 Vent Close Elbow
Durable through the wall hood. Fully assembled, riveted tailpipe, backdraft flapper. Standard mouth hood for good airflow. Aluminum film laminate. Elbow turns 90 degrees within 4". One male rotating snap-lock fitting, one female rotating snap-lock fitting. For 90 degree turns, especially on the dryer.
Lambro 209W Dryer Vent Hood with Standarad Tail Piece Lambro 224B Dryer Vent Hood Lamaflex 418 Flexible Tube
Plastic face with standard aluminum tailpiece. Plastic face with standard aluminum tailpiece. Aluminum film laminate. Includes 2 plastic clamps.
Genova 300 Cold Water Pressure Pipe 20 ft Builders Best 10155 Offset Elbow Sta-Rite FPDMP21SA Parts2O
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Use when outlet pipe on dryer protrudes up to 2.5". Can also be used where wall outlet pipe protrudes and is too large for the wall offset elbow. 4" diameter fittings, aluminum. Turns 90 degrees within 4.5". Includes one male snap-lock fitting and one female rotating snap-lock fitting. Works with any drill (1200 RPM or higher). Perfect for emptying overflowing dishwashers, washing machines, aquariums and clogged sinks. Pumps up to 225 GPH. Self-priming.
Lambro 1369B Louvered Dryer Vent Kit Lambro 1369W Louvered Dryer Vent Kit Lambro 1700 Heat Economizer
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Humidifies air in winter, exhausts air out-of-doors in summer. Converts clothes dryer into an extra source of heat. Saves energy and humidifies during dry months. Includes heat economizer body, mounting bracket, handle and screw, filter, 2 plastic clamps. Dimensions: 8" x 6". Designed for a 4" duct.
M-D Building Products 02394 Pipe Wrap Tape Cardel Industries 1/2X5 Copper Tubing Genova Products 80021F ABS-DWV Foam Core Pipe
Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Lambro 164W Exhaust Double Sided Under Eave Ventilator Lambro 1365W Preferred Hood Dryer Vent Kit Lambro 1365B Preferred Hood Dryer Vent Kit
Plastic double-sided under eave vent adapts to 4" or 6" exhaust ducts; includes (2) removable screens and (1) 6" to 4" transition collar; exhaust only; has backdraft damper and bug screen. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps.
Genova 30012 Cold Water Pressure Pipe 20 ft Air King GF-06S Grease Filter Lambro 3110 Flexible Duct Pipe with (2) Worm Gear Clamps
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Aluminum grease filter for use with QZ2 Series. Triple lock design for an airtight seal, flame resistant & durable. Includes: (1) UL listed semi-rigid transition duct and rigid  (2) worm gear clamps. For cloths dryers and can be used to vent 3" or 4" bathroom fans.
Cardel 3/4X2 Copper Tubing Cambridge-Lee 1/2X10M Type M Water Tube Air King RF-35S Grease Filter
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Aluminum grease filter for use with DS, AV, AR Series.
Lambro 498PL Laminated Dryer Transition Duct EZ Fasten 010150 Flexible Dryer Vent Pipe Lambro 1359B Louvered Dryer Vent Kit
UL Listed. Easy to install, fits in tight places where rigid metal ducting will not work. 4" aluminum male snap-lock fitting and soft-cuff end. Pretreated ends for quicker, easier hook-ups. Sturdy construction meets dryer manufacturer specifications. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Lambro 301 Flexible Duct Pipe Silverduct UL 10793 Flexible Dryer Transition Duct Lambro 120 Round Range Hood Transition
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Note: Dryer manufacturers do not recommend venting containing any plastic. 3-1/4" x 10" to round transition.
Lambro 1377W Louvered Dryer Vent Kit Cobra 54 Vent Brush LamaFlex 406W Louvered Dryer Vent Kit
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Cleans dryer ducts from inside the home to outside. 10' dryer duct cleaning brush with plastic handle and coated wire. 4" rigid brush for removing lint blockages. Improves efficiency and saves energy. Includes: (1) Louvered vent with tail pipe, (1)  laminated duct, (1)trim plate and 2 adjustable nylon clamps.
Lambro 3120L Flexible Duct Pipe with (2) Worm Gear Clamps Air King RF-34S Odor Filter HOSE KIT SUMP PUMP UNIVERSAL
Triple lock design for an airtight seal, flame resistant & durable. Includes: (1) UL listed semi-rigid transition duct and rigid  (2) worm gear clamps. For cloths dryers and can be used to vent 3" or 4" bathroom fans. Charcoal odor filter for use with the DS and AV Series. Work with all pumps with a discharge size of 1-1/4" or 1-1/2". For permanent or temporary use. 24' poly drainage tubing.  Includes 1-1/4" and 1-1/2" adapters with rust resistant hose clamps.
Lambro 1373B Preferred Hood Dryer Vent Kit Lambro 1373W Preferred Hood Dryer Vent Kit Lambro 1359W Louvered Dryer Vent Kit
Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Genova 300 Cold Water Pressure Pipe Sta-Rite FP0012-6U-P2 Pump Discharge Hose Kit LamaFlex 407W Dryer Vent Kit
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. For use with pedestal and submersible sump pumps. 24' x 1-1/4" flexible drain tubing, 1-1/4" and 1-1/2" high-impact NPT barbed adapters,  hose clamp included. Includes: (1) Louvered vent with tail pipe, (1)  laminated duct, (1)trim plate and 2 adjustable nylon clamps.
Genova 300 Cold Water Pressure Pipe 20 ft Lambro 1379B Louvered Dryer Vent Kit Readi-Pipe 110131 Flexible Dryer Transition Duct
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. 4" aluminum soft-cuff on both ends. Pre-treated ends are ready to clamp to other components. Sturdy construction meets dryer manufacturer specifications. Includes 2 steel clamps for vent kit.
Lambro 1379W Louvered Dryer Vent Kit Lambro 1375W Preferred Hood Dryer Vent Kit Lambro 1375B Louvered Dryer Vent Kit
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps.
Lambro 122 Round Range Hood Transition Lambro 138 Round Range Hood Transition Lambro 427 Duct Pipe
3-1/4" x 10" to round transition. 3-1/4" x 10" to round transition. Lambro Duct Pipe, 4 in Nominal, 60 in Length, Snap Lock End, Aluminum
Wayne 56171 Sump Discharge Hose Kit Builders Best 110129 Dryer Vent Pipe Lambro 302UL Flexible Semi-Rigid Duct Pipe
Sump pump discharge hose kit. 24' length. For dryer venting. 4" aluminum Snap-Lock fittings clamp to standard connections or snap without clamps to other Snap-Lock fittings. Compressed to 24" length. Sturdy construction meets dryer manufacturer specifications. U. L. listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
Cardel Industries 1/2X5 Copper Tubing Genova 300 Cold Water Pressure Pipe 20 ft Air King RF55 Combination Mesh Grease/Odor Filter
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Combination grease and charcoal odor filter for use with the AD Series.
Builders Best 111716 Vent Hood Lambro 102 Range Hood Elbow American Granby SPDK15OMHD Discharge Hose Kit
Plastic vent hood faceplate with 1 piece flapper for clothes dryer and bathroom venting. Fits 4" aluminum pipe (not included). Beveled and weighted design prevents birds from pecking the flapper open and keeps flapper closed during windy conditions. Reversible trim ring allows adjustment of the distance between the faceplate of the hood and the back open ring from .5" to 1.15". Hood can be used for various applications including vinyl siding. White. For standard 3-1/4" x 10" duct, 90 degree short way. Heavy-duty flexible hose for suction or discharge. For permanent or temporary use. Includes 1-1/2" corrugated hose, 1-1/2" male adapter and stainless steel hose clamp. 24' length.
Lambro 316W Dryer Vent Kit Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft Cardel Industries 3/4X5 Copper Tubing
Includes semi-rigid flexible aluminum duct, 4" ring plate, 2 worm gear clamps and preferred hood. Cold water use only. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 30022 Cold Water Pressure Pipe 20 ft Lambro 280 Dryer Vent Kit with Spring Cambridge-Lee 1/2X10L Type L Water Tube
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Includes aluminum preferred hood, length of UL transition duct, 4" aluminum ring plate and 2 metal tension clamps. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Lambro 3120UL Flexible Semi-Rigid Duct Pipe with (2) Clamps Lambro 211L Dryer Lint Trap Kit Lambro 381 Tube Clamp
U. L. listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes 2 clamps. Non-combustible with a maximum operating temperature of 400?F. Polybagged. Alternative to outside venting. Concave bottom for maximum efficiency. Includes 4" x 5' Lama Flex duct, lint trap, screw-on hanger and 2 clamps. This unit uses water to catch the lint. Used for secure connection to flexible aluminum duct.
Lambro 354R Roof Cap BAG LINT COLLECTION DRY VENT  Air King E-22A Round Collar
For use with 3" and 4" installations, round. Includes damper, screen and collars. Captures loosened lint from the dryer vent while rotary brushing with the  ?LintEater? system. Poly-blend. Painted steel round 7" collar with damper, (use with QZ, DS, and AV Series).
Lambro 351G Wall Cap Air King CF-06S Combination Mesh Grease/Odor Filter Cambridge-Lee 3/4X10M Type M Water Tube
For round duct. Damper spring controlled. Removable screen. Charcoal odor filter for use with the QZ2 Series. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
DRYER VENT CLEAN JR SYSTEM    Lambro 1170W Wall Cap Lambro 313WUL Louvered Dryer Vent Kit
Designed for shorter dryer vents up to 6 ft. in length.  It's easy to use by hand or with your cordless drill and effectively removes dangerous lint build-up. For standard 3-1/4" x 10" duct. Damper spring controlled. 1 - 4" white plastic louvered vent with tail pipe. 1 - 4" x 8' semi-rigid transition duct - UL listed. 2 - galvanized worm gear clamps. 1 - trim plate.
Genova 300 Cold Water Pressure Pipe 20 ft Ultra Seal 289W Dryer Vent Closure Lambro 316WUL Preferred Hood Dryer Vent Kit
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Heated dryer exhaust air lifts interior floating vent cover. Air escapes out of bottom vent. Keeps hot or cold air out. Keeps birds and other animals outside. 1 - 4" white plastic preferred hood with tail pipe. 1 - 4" x 8' semi-rigid transition duct - UL listed. 2 - galvanized worm gear clamps.  1 - removable screen. 1 - trim plate.
DRYER VENT EXT KIT 4-3FT RODS Lambro 3006 Rectangular Dryer Vent Duct Plumb Pak PP855-50 Drill Powered Pump
4 - 3 foot long rods add to your LintEater rotary dryer vent cleaning system for vents longer than 12 feet. Allows the dryer to be as close as 3" away from the wall. Attaches to electric drill. Standard hose threads.
Lambro 106R Wall Cap Lambro 414 Flexible Laminated Dryer Transition Duct Genova Products 80031F ABS-DWV Foam Core Pipe
For standard 3-1/4" x 10" duct. Damper spring controlled. 2 sided, five layer foil laminate. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Master Flow 12WVA4B Round Wall Ventilator Wayne 66000-WYN1 Sump Discharge Hose Kit Lambro 3005 Rectangular Dryer Vent Duct
Master Flow wall vents are used for the outside sidewall termination of kitchen, bath fans, range hoods, microwave venting, or dryer exhausts. Wall vents are easy to install. Sump pump discharge hose kit. 24' length. Allows the dryer to be as close as 3" away from the wall.
Cardel 3/4X5 Copper Tubing Lambro 109R Roof Cap Cardel Industries 1/2X20M Copper Tubing
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. 1-3/4" collar. Includes damper and screen. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Lambro 4004 Quick Connect Vent Kit Lambro 116 Roof Cap Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft
Includes length of flexible aluminum duct, 2 plastic 90-degree elbow, one marked "A" and "B" both with rubber gasket. Rubber gasket secures elbow to dryer or vent hood. No clamp needed. For ducts up to 7" round. Includes damper and screen. Cold water use only.
Lambro 370 Dryer Vent Hood with Damper Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft Genova 300 Cold Water Pressure Pipe
Galvanized vent hood with damper Cold water use only. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
SWITCH PRESSURE 20/40PSI      Square D FSG2J20CP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J20BP Pumptrol Type FSG Water Pump Pressure Switch
SWITCH PRESSURE 20/40PSI
Our Price: $24.24
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
Square D Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J21CP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J21BP Pumptrol Type FSG Water Pump Pressure Switch
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
Square D Pumptrol Type FSG Water Pump Pressure Switch Square D Pumptrol Type FHG Air Compressor Pressure Switch Air King SP2430W Back Splash
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed. Air compressor pressure switch suitable for small electrically driven air compressors, set for Off at 100 PSI. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 20 PSIG. Adjustable Cut out range 40-100 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood.
Air King SP2430BI Back Splash Air King SP2430A Back Splash Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft
Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Cold water use only.
Genova Products 80041F ABS-DWV Foam Core Pipe Square D FSG2J21M4BP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J21M1BP Pumptrol Type FSG Water Pump Pressure Switch
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Water pump pressure switch factory set to 30-50 PSI.  Suitable for use on all types of pumps including jet, submersible, and reciprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individially boxed. Water pump pressure switch factory set to 30-50 PSI.  Suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes a maintained manual cut-out lever allowing the pump to run on auto or to be turned off. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individially boxed.
Square D FSG2J20M4BP Pumptrol Type FSG Water Pump Pressure Switch Cambridge-Lee 3/4X10L Type L Water Tube Zero Periscope 110172 Adjustable Dryer Vent Duct
Water pump pressure switch factory set to 20-40 PSI.  Suitable for use on all types of pumps including jet, submersible, and reciprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Individially boxed. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Use where outlets overlap or are very close. Adjusts to reach the side of most dryers. Rigid aluminum construction meets dryer manufacturer specifications and building codes. Contains: 4" male snap-lock fitting and 4" collar. For dryer connection as close as 2" from the wall. Sections are not reversible. Draw band female collar.
Square D Pumptrol 2-Way Type FHG Air Compressor Pressure Switch Square D FHG12J52XBP Pumptrol 2-Way Type FHG Air Compressor Pressure Switch Air King SP2436W Back Splash
Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood.
2X20SCH80 PR.PIPE(GRY) NOBELL Cardel Industries 1/2X20L Copper Tubing Wayne 66033-WYN1 Jet Pump Pressure Switch
Use for kpressure applications. Cold water only. 400PSI Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded.
Cardel Industries 3/4X20M Copper Tubing Gt Water WP-25 Pump-A-Lot DRYER VENT CLEAN SYSTEM 10PC
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Includes one water pump model WP10, with 12 foot, 1-1/4" discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8" of surface. Non-corrosive and uses 1-1/4" or 1-1/2" discharge hose. Pumps approximately 800 gallons of water per hour. Safe and easy to use. Boxed. Removes dangerous lint build up.
Wayne 66025-WYN1 Jet Pump Pressure Switch Air King RCB810 Roof Cap PUMP HAND MANUAL MULTI PURPOSE
For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded. Roof cap with spring loaded damper and bird screen for 3" or 4" round ducting. Constructed of black ABS polymeric (plastic). Pumps up to 1 gallon per 4 full strokes. Includes 6' drain hose. Works great for draining water from boats, toilets, sinks, rain barrels, pools, fountains, ponds, lakes & general water transfer. Two size options: 36" water pump or 18" water pump. Includes garden, suction and drain hose adapters. Easy to assemble and requires no electricity to operate. Garden hose adapter included. Made from high quality thermoplastic. Disassembles quickly for easy storage.High quality aluminum push rod with ergonomic handle.
Genova 300 Cold Water Pressure Pipe Cardel Industries 01075 Copper Tubing WALL CAP STEEL BLACK 3.25X10IN
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Air King Range Hood Wall Cap, Suitable For Use With: 3-1/4 x 10 in Ducting, 22 ga, Steel, Galvanized, Black
Water Worker HT-2B Vertical Pre-charged Well Tank Lambro 107 Roof Cap Air King Advantage AR AR1305 Under Cabinet Round Duct Range Hood
Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. For ducts up to 10" round and 3-1/4" x 10". With damper and screen. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and two speed fan control. Comes equipped for 7" vertical round ducting only, (duct collar built into hood). 180 CFM, 7.5 Sones. UL Listed. HVI 2100 Certified. Uses #RF-35 filter.
Cardel Industries 3/4X20L Copper Tubing Flotec FP7105-00 Vertical Pre-Charged Pressure Tank Square D Pumptrol Float Liquid Level Switch
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Factory pre-charged to 20 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for small water systems and lower-flow applications. NSF-61 approved. Non-replaceable diaphragm. Float Switch designed for use in open tank or sump pump applications.   Reverse action contacts open on liquid rise. 2 pole, NEMA 1 enclosure, bracket mounted, Screw clamp terminals, UL/CSA Listed, RoHS compliant, contacts open on liquid rise. Rated for 2 hp at 115 v and 3 hp at 230 v. Individially boxed.
Air King Advantage AD AD1306 Under Cabinet Ductless Range Hood Air King Advantage AD AD1303 Under Cabinet Ductless Range Hood Air King Advantage AD AD1305 Under Cabinet Ductless Range Hood
Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed.
Air King Advantage AD AD1243 Under Cabinet Ductless Range Hood Air King SP2430SS Back Splash Air King Advantage AV AV1303 Under Cabinet Convertible Range Hood
Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter.
Air King Advantage AV AV1304 Under Cabinet Convertible Range Hood Air King Advantage AV AV1306 Under Cabinet Convertible Range Hood Air King Advantage AV AV1305 Under Cabinet Convertible Range Hood
Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter.
Cardel Industries 01082 Copper Tubing Air King SP2436SS Back Splash Air King Advantage AD AD1365 Under Cabinet Ductless Range Hood
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed.
Air King Advantage AD AD1363 Under Cabinet Ductless Range Hood Water Worker HT-4B Vertical Pre-charged Well Tank Sta-Rite FP0S1250X-08 Flotec