Home > HEATING & COOLING > VENTING & FANS
Choose a sub category:
DRYER VENTILATION RANGE HOODS BATH FANS & VENTILATION
FANS
Sort By:
1
Thermwell P10XB/6 Frost King Thermwell P11XB/6 Frost King Frost King FC1 Faucet Cover
Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness. Insulates outside faucets to help prevent freezing.
Tundra Plus PR38138UW Pipe Insulation M-D Building Products 50162 Tube Pipe Insulation Genova 50025 CPVC Tubing
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Pre-cut, self sealing slits for easy application High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
Frost King FC2 Faucet Cover M-D 03939 Cold Weather Faucet Cover Frost King FC3 Slip-On Faucet Protector
Insulates outside faucets to help prevent freezing. Protects faucets from frigid weather, helps prevent frozen pipes, made from weather resistant rigid foam, easy to install. Insulates outside faucets to help prevent freezing.
Genova FlowGuard Water Pipe M-D 50140 Pipe Insulation M-D 50142 Pipe Insulation
Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4").
Genova 50035 CPVC Tubing Brass Craft CSSTNN-10N Gas Appliance Connector M-D Building 50144 Pipe Insulation
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4").
Brass Craft CSSTNN-16N Gas Appliance Connectors Genova FlowGuard Water Pipe DRAIN PIPE PERF FLEX 4INX8FT
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water. Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX8FT Brass Craft CSSTNN-22N Gas Appliance Connectors Hancor 04020010H Drain Pipe
Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Perforated 3-hole. 120 degree. CSA approved.
Harvey's 014100 Pipe Wrap Brass Craft CSSTNN-28N Gas Appliance Connectors Hancor HY-PF1-04-0010 Perforated Single Wall Pipe
High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Hancor 04540010H Solid Single Wall Pipe Air King GF-06S Grease Filter Cardel Industries RC2510 Copper Tubing
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Aluminum grease filter for use with QZ2 Series. Mueller Coil Tubing, Short, 1/4 in Nominal Size, 10 ft Length, Copper, For General Purpose
Air King RF-35S Grease Filter Air King RF-34S Odor Filter Brass Craft CSSTNN-34N Gas Appliance Connectors
Aluminum grease filter for use with DS, AV, AR Series. Charcoal odor filter for use with the DS and AV Series. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
BrassCraftCSSLNN-10NGasApplianceConnectors Cardel 12033 Copper Tubing Brass Craft CSSL54-12 Gas Appliance Connectors
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSD54-12 Gas Appliance Connectors Cardel Industries RC3810 Copper Tubing Air King RF55 Combination Mesh Grease/Odor Filter
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Mueller Coil Tubing, Short, 3/8 in Nominal Size, 10 ft Length, Copper, For General Purpose Combination grease and charcoal odor filter for use with the AD Series.
Lambro 120 Round Range Hood Transition Brass Craft CSSLNN-16N Gas Appliance Connector BrassCraftCSSCNN-22NGasApplianceConnectors
3-1/4" x 10" to round transition. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
BrassCraftCSSLNN-22NGasApplianceConnectors BrassCraftCSSLNN-28NGasApplianceConnectors Harvey's 014130 Pipe Wrap
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection.
Genova Products 560010 CPVC Pipe Brass Craft CSSLNN-34N Gas Appliance Connector B and K Industries G014SS101118RP Gas Connectors
High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature.
Lambro 122 Round Range Hood Transition Brass Craft CSSTNN-46N Gas Appliance Connectors Lambro 138 Round Range Hood Transition
3-1/4" x 10" to round transition. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. 3-1/4" x 10" to round transition.
Genova 500052 Solid Cut Pipe Brass Craft CSSL54-18 Gas Appliance Connectors Brass Craft CSSNN-28N Gas Appliance Connector
Used within buildings for potable hot and cold water distribution from the water meter to fixtures. Meets ASTM D2846. NSF listed. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Air King E-22A Round Collar Air King CF-06S Combination Mesh Grease/Odor Filter Brass Craft CSSC21-24 Gas Appliance Connectors
Painted steel round 7" collar with damper, (use with QZ, DS, and AV Series). Charcoal odor filter for use with the QZ2 Series. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSL54-36 Gas Appliance Connectors Brass Craft CSSL54-24 Gas Appliance Connectors Brass Craft CSSCNN-16N Gas Appliance Connector
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
BrassCraftCSSCNN-34NGasApplianceConnectors Lambro 102 Range Hood Elbow Brass Craft CSSD54-18 Gas Appliance Connectors
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. For standard 3-1/4" x 10" duct, 90 degree short way. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSD54-24 Gas Appliance Connectors Cardel Industries 12035 Copper Tubing Brass Craft CSSC21-18 Gas Appliance Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Namasco BLACK-1/2 Pipe Brass Craft CSSD54-24P Procoat Brass Craft CSSD54-30 Gas Appliance Connectors
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSL54-30 Gas Appliance Connectors Brass Craft CSSTNN-58N Gas Appliance Connectors Brass Craft CSSL54-36P Procoat Gas Dryer Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings.
Brass Craft CSSC21-30 Gas Appliance Connector Lambro 354R Roof Cap Brass Craft CSSC21-36 Gas Appliance Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. For use with 3" and 4" installations, round. Includes damper, screen and collars. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSD54-36 Gas Appliance Connectors Brass Craft CSSLNN-46N Gas Appliance Connector Cardel RC2520 Copper Tubing
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Mueller Coil Tubing, Short, 1/4 in Nominal Size, 20 ft Length, Copper, For General Purpose
Brass Craft CSSL54-24P Procoat Gas Dryer Connectors Brass Craft CSSCNN-46N Gas Appliance Connectors Lambro 351G Wall Cap
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. For round duct. Damper spring controlled. Removable screen.
Brass Craft CSSL54-48 Gas Appliance Connector Namasco .25X10B Steel Pipe DRAIN PIPE PERF FLEX 4INX25FT
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX25FT Lambro 1170W Wall Cap Brass Craft CSSD54-48 Gas Appliance Connectors
Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. For standard 3-1/4" x 10" duct. Damper spring controlled. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSC21-48 Gas Appliance Connectors Cardel Industries RC3820 Copper Tubing Brass Craft CSSD54-48P Procoat
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Mueller Coil Tubing, Short, 3/8 in Nominal Size, 20 ft Length, Copper, For General Purpose Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor.
Brass Craft CSSL54-48P Procoat Lambro 106R Wall Cap Brass Craft CSSD54-36P Procoat
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. For standard 3-1/4" x 10" duct. Damper spring controlled. Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor.
Brass Craft CSSLNN-58N Gas Appliance Connectors Brass Craft CSSD54-60 Gas Appliance Connectors Namasco BLACK-3/4 Pipe
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Brass Craft CSSC21-36P Procoat Gas Range Connectors Cardel 12039 Copper Tubing Brass Craft CSSC21-48P Procoat Gas Range Connectors
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings.
BrassCraftCSSCNN-58NGasApplianceConnectors Brass Craft CSSL54-60 Gas Appliance Connectors BrassCraftCSSL44E-24PGasApplianceConnectors
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Lambro 109R Roof Cap Brass Craft CSSC54-36P Procoat Gas Range Connectors Brass Craft CSSC21-60 Gas Appliance Connectors
1-3/4" collar. Includes damper and screen. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Cardel Industries RC5010 Copper Tubing Lambro 116 Roof Cap Genova 500072 Solid Cut Pipe
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. For ducts up to 7" round. Includes damper and screen. Used within buildings for potable hot and cold water distribution from the water meter to fixtures. Meets ASTM D2846. NSF listed.
BrassCraftCSSL44E-36PGasApplianceConnectors BrassCraftCSSD44E-18PGasApplianceConnectors Brass Craft CSSC54-48P Procoat
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings.
Namasco .375X10B Steel Pipe BrassCraftCSSD44E-24PGasApplianceConnectors BrassCraftCSSC44E-24PGasApplianceConnectors
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Namasco BLACK-1 Steel Pipe Air King SP2430W Back Splash Air King SP2430BI Back Splash
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood.
Air King SP2430A Back Splash Brass Craft CSSC12E-36 P Gas Appliance Connectors BrassCraftCSSC44E-36PGasApplianceConnectors
Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
BrassCraftCSSL47E-24PGasApplianceConnectors Brass Craft CSSD44E-36P Gas Appliance Connectors Air King SP2436W Back Splash
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood.
BrassCraftCSSC12E-48PGasApplianceConnectors BrassCraftCSSL44E-48PGasApplianceConnectors Cardel 12045 Copper Tubing
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
BrassCraftCSSL47E-36PGasApplianceConnectors Air King RCB810 Roof Cap Brass Craft CSSC21-72 Gas Appliance Connectors
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Roof cap with spring loaded damper and bird screen for 3" or 4" round ducting. Constructed of black ABS polymeric (plastic). ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
DRAIN PERF FLEX W/SOCK 4X25FT Brass Craft CSSD44E-48 P Gas Appliance Connectors Namasco BLK 1/2 Steel Pipe
Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Brass Craft CSSB22-36 Gas Appliance Connectors Cardel Industries RC5810 Copper Tubing Genova 500 Pipe
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
Brass Craft CSSD44E-60P Gas Appliance Connectors BrassCraftCSSC44E-48PGasApplianceConnectors Cardel Industries REF-1/8 Refrigeration Copper Tubing
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage.
Cardel Industries RC5020 Copper Tubing Namasco 1.25X10B Steel Pipe WALL CAP STEEL BLACK 3.25X10IN
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Air King Range Hood Wall Cap, Suitable For Use With: 3-1/4 x 10 in Ducting, 22 ga, Steel, Galvanized, Black
Cardel REF-3/16 Refrigeration Copper Tubing Namasco BLK 3/4 Steel Pipe Namasco 1.5X10B Steel Pipe
Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Cardel Industries REF-1/4 Refrigeration Copper Tubing Lambro 107 Roof Cap Namasco 2X10B Steel Pipe
Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. For ducts up to 10" round and 3-1/4" x 10". With damper and screen. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Air King Advantage AD AD1306 Under Cabinet Ductless Range Hood Air King Advantage AX AX1303 Under Cabinet Range Hood Air King Advantage AR AR1303 Under Cabinet Round Duct Range Hood
Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3 1/4" x 10" vertical/horizontal ducting, (duct adapter and damper included). Direct wire. 160 CFM, 6.5 Sones Horizontal/Vertical. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and two speed fan control. Comes equipped for 7" vertical round ducting only, (duct collar built into hood). 180 CFM, 7.5 Sones. UL Listed. HVI 2100 Certified. Uses #RF-35 filter.
Air King Advantage AD AD1303 Under Cabinet Ductless Range Hood Air King Advantage AD AD1305 Under Cabinet Ductless Range Hood Air King Advantage AR AR1305 Under Cabinet Round Duct Range Hood
Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and two speed fan control. Comes equipped for 7" vertical round ducting only, (duct collar built into hood). 180 CFM, 7.5 Sones. UL Listed. HVI 2100 Certified. Uses #RF-35 filter.
Air King Advantage AD AD1243 Under Cabinet Ductless Range Hood Cardel Industries RC5820 Copper Tubing Air King Advantage AV AV1303 Under Cabinet Convertible Range Hood
Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter.
Air King Advantage AV AV1304 Under Cabinet Convertible Range Hood Air King Advantage AV AV1306 Under Cabinet Convertible Range Hood Air King Advantage AV AV1305 Under Cabinet Convertible Range Hood
Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter.
Air King SP2430SS Back Splash Genova 500 Pipe Brass Craft CSSB22-60 Gas Appliance Connectors
Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Namasco BLK 1 Steel Pipe Air King SP2436SS Back Splash Quick R PC38158UW Pipe Insulation
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Under cabinet back splashes protect the wall behind your cooking surface. Designed to match both the finish and size of your range hood. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Quick R PR38078UW Pipe Insulation Cardel Industries REF-5/16 Refrigeration Copper Tubing Thermwell P10X Frost King Pipe Insulation
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
Quick R PC38218UW Pipe Insulation Cardel Industries REF-3/8 Refrigeration Copper Tubing Tundra Plus PR38118UW Pipe Insulation
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Hancor 03510100 Regular Solid Single Wall Pipe 100 ft Thermwell P11X Frost King Pipe Insulation Quick R PC38238UW Pipe Insulation 6 ft L x 3/8 in T
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Cardel Industries 1/4X60L Copper Tubing Air King Advantage AD AD1365 Under Cabinet Ductless Range Hood Air King Advantage AD AD1363 Under Cabinet Ductless Range Hood
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed. Features a low profile contemporary style with a 60 watt maximum cook top light, (bulb not included), and a two speed fan control. Equipped for ductless operation only. Includes a combination grease/charcoal odor filter, model RF-55. UL Listed.
Air King Advantage AR AR1363 Under Cabinet Round Duct Range Hood Tundra Seal PR38058UW Pipe Insulation Quick R PR38118TA Self-Sealing Pipe Insulation
Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and two speed fan control. Comes equipped for 7" vertical round ducting only, (duct collar built into hood). 180 CFM, 7.5 Sones. UL Listed. HVI 2100 Certified. Uses #RF-35 filter. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Quick R 13812 Pipe Insulation Air King Advantage AV AV1365 Under Cabinet Convertible Range Hood Air King Advantage AV AV1366 Under Cabinet Convertible Range Hood
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter.
Hancor 04010100 Perforated Regular Single Wall DWV Pipe 100 ft Hancor 04020100H 3-Hole Channel Flow Perforated Single Wall Pipe 100 ft Air King Advantage AV AV1364 Under Cabinet Convertible Range Hood
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Perforated 3-hole. 120 degree. CSA approved. Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter.
Air King Advantage AV AV1363 Under Cabinet Convertible Range Hood Lambro 101 Range Hood Duct Hancor 04510100 Regular Solid Single Wall Pipe 100 ft
Low profile contemporary style with a 60 watt maximum cook top light (bulb not included) and a two speed fan control. Comes equipped for 3-1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of model RF-34 charcoal odor filter, (not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 180 CFM, 7.0 Sones/Horizontal, 180 CFM, 7.5 Sones/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-34S filter. For standard 3-1/4" x 10" duct. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Namasco BLK 11/4 Steel Pipe M-D 50150 Tube Pipe Insulation Quick R 11812 Pipe Insulation
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Reduces heat loss on hot pipes. Helps stop sweating on cold pipes. Helps prevent water pipes from freezing. Easy to install. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Tundra Seal PR38078TA Self-Sealing Pipe Insulation Air King Designer DS DS1303 Under Cabinet Convertible Range Hood Air King Designer DS DS1306 Under Cabinet Convertible Range Hood
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors. Streamline body height, with an infinite speed control. 60 watt maximum cook top light with two brightness settings (bulb not included). Comes equipped for 3 1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of a charcoal odor filter, (model RF-34, not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 200 CFM, 6.5 Sones Horizontal/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-35 filter. Streamline body height, with an infinite speed control. 60 watt maximum cook top light with two brightness settings (bulb not included). Comes equipped for 3 1/4" x 10" vertical or horizontal ducting, (duct adapter and damper included). Can be converted to ductless operation with the addition of a charcoal odor filter, (model RF-34, not included), or to a 7" round, for vertical ducting, with the addition of model E-22A collar and damper, (not included). 200 CFM, 6.5 Sones Horizontal/Vertical. UL Listed. HVI 2100 Certified. Uses #RF-35 filter.
M-D 50154 Tube Pipe Insulation Tundra Seal PR38118TW Self-Sealing Pipe Insulation Tundra Plus PR58078TA Self-Sealing Pipe Insulation
Reduces heat loss on hot pipes. Helps stop sweating on cold pipes. Helps prevent water pipes from freezing. Easy to install. For hot and cold water pipes, self sealing, cuts heat loss, stops condensation, resists freezing. Flame retardant added. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Tundra Seal PR38138TW Self-Sealing Pipe Insulation Cardel Industries REF-1/2 Refrigeration Copper Tubing