Home > HEATING & COOLING > HEAT & AIR CONDITIONING > AIR FILTRATION > FURNACE HUMIDIFIERS & ACCESSOR
Sort By:
1
Lambro 284L Worm Gear Clamp Lambro 253 Standard Economy Clamp Genova 300 Cold Water Pressure Pipe 10 ft
Used for secure connection to flexible aluminum duct. Lambro Economy Clamp, Standard, 3 - 4 in, Plastic Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit.
Lambro 2541L Tension Clamp Lambro 283 Dryer Tube Clamp Genova 315057 Solid Wall Cold Water Pressure Pipe 5 ft
Lambro Tension Clamp, 4 in Used for secure connection to flexible aluminum duct. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 31007 Cold Water Pressure Pipe 10 ft Draintech 0440SDB Round Drain Grate Lambro 244 Tubing Connector
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. ADA compliant. Dual Wall, SDR 35, 2729 S&D For flexible aluminum duct.
Lambro 246 Flexible Duct Connector Genova 315077 Solid Wall Cold Water Pressure Pipe 5 ft Lambro 2841 Worm Gear Clamp
For flexible aluminum duct. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used for secure connection to flexible aluminum duct.
Genova 300 Pipe Genova 31010 Cold Water Pressure Pipe 10 ft NDS 0633SD Corrugated Drain Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. NDS Universal Plug Adapter, 6 in Length
Genova 300 Pipe Genova 300 Cold Water Pressure Pipe 20 ft Genova 315107 Solid Wall Cold Water Pressure Pipe 5 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Lambro 2676W Dryer Vent Hood Lambro 2677B Hood/Face Draintech 0440SDG Round Drain Grate
Includes face only. Includes face only. Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. ADA compliant. Dual Wall, SDR 35, 2729 S&D
Lambro 235 Vent Reducer/Increaser Genova 30007 Cold Water Pressure Pipe 20 ft Lambro 2300 Adjustable Vent Elbow
Increases from 3" to 4" and reduces from 4" to 3". Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Lambro Vent Elbow, Adjustable, Suitable For Use With: Duct, 3 in, Aluminum
Lambro 3801 Worm Gear Clamp Genova 300 Pipe Builders Best 110113 Dryer Vent Hood
Used for secure connection to flexible aluminum duct. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Thicker and more durable. 4" x 10.5" Fully assembled, riveted tailpipe, backdraft flapper. Wide mouth for excellent airflow.
KBI DF-0750-T Chemical Resistant Drum Faucet Lambro 2310 Adjustable Vent Elbow Draintech 0642SDB Square Drain Grate
3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. Lambro Vent Elbow, Adjustable, Suitable For Use With: Duct, 4 in, Aluminum Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Grates fit directly into Sewer & Drain pipe or fittings, and Corrugated pipe without the use of a coupling. Not for use in areas subject to vehicular traffic. Fits 6" corrugated single wall and dual pipe, SDR 35, 2729 S&D and Triple Wall pipe. 18.9 sq.in. open surface area. 1/4" grate opening. 0-60 PSI. (BLACK) Can also be used with 6" round catch basins. ADA COMPLIANT.
NDS 1245 Corrugated Drain Fittings BREAKER VACUUM BRASS 3/4INCH  B&K 108-904RP Backflow Preventer Vacuum Breaker
Fits 3" x  4" corrugated pipe, 3" & 4" S/D pipe and 4" SDR35 pipe. Offset allows for adjusting inlet height. Adapters fit 9 x 9, 12 x 12, 18 x 18, 24 x 24 catch basins, and all low profile series. SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Genova 31011 Cold Water Pressure Pipe 10 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 30010 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 31012 Cold Water Pressure Pipe 10 ft Lambro 1491W Bird/Rod Guard Lamaflex 411 Flexible Tube
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Hinged design for easy cleaning access. Fits over 3" and 4" hoods and louvered vents. UV inhibitor is used to help prevent the premature fading of vent. Aluminum film laminate.
Genova 300 Pipe Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
Lambro 250 Vent Increaser Lambro 251 Vent Reducer Draintech 0443SDB Atrium Drain Grate
Increases from 3" to 4". Lambro Vent Reducer, 4 X 3 in Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. Dual Wall, SDR 35, 2729 S&D
Lambro 1775L Inline Damper B&K 108-904 Silcock Vacuum Breaker Lambro 267B Wall Mount Dryer Vent Hood
Prevents outside air from entering the house through the clothes dryer. Easy to install on the existing dryer venting system. For 4" installation. Includes draft blocker body and 2 plastic clamps. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) ? 4"  plastic louvered vent with 11" tail pipe, (1) ? 4"  plastic trim plate.
Lambro 143W Dryer Ventilator Lambro 267W Wall Mount Dryer Vent Hood P-Tanium 110889 Dryer Vent Hood
Under eave vent for bathroom fan and dryer venting. Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) ? 4"  plastic louvered vent with 11" tail pipe, (1) ? 4"  plastic trim plate. Durable through the wall hood. Fully assembled, riveted tailpipe, backdraft flapper. Standard mouth hood for good airflow.
Lambro 3003L Quick Fit Elbow Kit Genova Products 80011F ABS-DWV Foam Core Pipe Lambro 344 Dryer Vent Hood
Kit for clothes dryer installations. Includes white plastic 90 degree elbow with rubber gasket inside one side and 4" metal worm gear clamp. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Opening/closing ?damper prevents outside elements from entering the vent. (1) ? 4? Aluminum preferred hood vent with 11? tail pipe. (1) ? 4? White plastic trim plate.
Genova 300 Cold Water Pressure Pipe 20 ft Lambro 361W Dryer Vent Hood Harvey's 014100 Pipe Wrap
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Includes hood only. High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection.
Lambro 302L Flexible Semi-Rigid Duct Pipe Lambro 495P Flexible Laminated Dryer Transition Duct Builders Best 10151 Vent Close Elbow
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. UL listed. Elbow turns 90 degrees within 4". One male rotating snap-lock fitting, one female rotating snap-lock fitting. For 90 degree turns, especially on the dryer.
Genova 300 Cold Water Pressure Pipe Cobra 51 Lint Trap Brush Lambro 224W Dryer Vent Hood
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Appliance brush cleans dryer lint traps and heating vents. Plastic handle and rigid brush for removing lint and dust blockages. Improves efficiency and saves energy. Plastic face with standard aluminum tailpiece.
Lambro 222W Dryer Vent Hood Lambro 222B Dryer Vent Hood Lamaflex 412 Flexible Tube
Plastic face with standard aluminum tailpiece. Plastic face with standard aluminum tailpiece. Aluminum film laminate.
Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 400 Solid Solvent Weld Sewer and Drain Pipe Lambro 209W Dryer Vent Hood with Standarad Tail Piece
Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Plastic face with standard aluminum tailpiece.
Genova 300 Cold Water Pressure Pipe 20 ft Lambro 224B Dryer Vent Hood Builders Best 10155 Offset Elbow
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Plastic face with standard aluminum tailpiece. Use when outlet pipe on dryer protrudes up to 2.5". Can also be used where wall outlet pipe protrudes and is too large for the wall offset elbow. 4" diameter fittings, aluminum. Turns 90 degrees within 4.5". Includes one male snap-lock fitting and one female rotating snap-lock fitting.
Lamaflex 418 Flexible Tube NDS 1243 Storm Drain Fittings Fernco FSDP-EO Storm Drain Fitting
Aluminum film laminate. Includes 2 plastic clamps. Use to attach 3" or 4" pipe to any size NDS drain basin where a straight-line connection is needed. Works as a locking fitting to 3" or 4" Corrugated Pipe; as a snuggle fitting to 3" or 4" PVC or leach pipe. Manufactured using rigid, lightweight polyolefins. End outlet slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels. End outlet accommodates 3" & 4" sewer and drain pipe or 3" & 4" Sch. 40 fitting hub.
Fernco FSDP-EC Storm Drain Fitting B&K 109-204 Self-Closing Drum and Barrel Faucet NDS 0663SDG Round Atrium Grate With UV Inhibitor
Fernco FSDP-EC End Cap
Our Price: $8.44
The StormDrain Plus end cap slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels. Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01. Made of highest quality structural foam polyethylene with UV inhibitor. For use in all areas of vegetation and trees. Use in non-traffic areas where lawn mowers are excluded. 6" fits 6" S/ D pipe fittings, 6" bell end, 6" corrugated and 6" catch basins. Open surface area 23.91 sq.in. 5/16" grate opening. D, SDR 35, 2729 S&D Triple wall.
Genova Products 80021F ABS-DWV Foam Core Pipe Hancor 0455010 Single Wall Pipe 10 ft Hancor DW2ER040010 Perforated Regular Single Wall Pipe 10 ft
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Made with a white high density polyethylene layer around a black polyethylene core to form a lightweight pipe with excellent beam stiffness. Unaffected by extended exposure to the sun's heat and ultraviolet radiation. Immune to freeze/thaw conditions and continuous subzero temperatures. Corrosion resistant to acids, alkalies, and salts. Will not rust. Safe, easy, efficient installations without breaking, splitting, or cracking. Long-term performance without costly maintenance or replacement. Constructed with bell-and-spigot ends for soil-tight joints. Features a smooth interior and exterior. Meets the requirements of ASTM F810. Applications: waste management absorption fields, golf course drainage, downspouts, sidewalk "culverts," irrigation ditch enclosures, basement and foundation drainage, temporary plumbing, terrace risers, and waterway terracing. Made with a white high density polyethylene layer around a black polyethylene core to form a lightweight pipe with excellent beam stiffness. Unaffected by extended exposure to the sun's heat and ultraviolet radiation. Immune to freeze/thaw conditions and continuous subzero temperatures. Corrosion resistant to acids, alkalies, and salts. Will not rust. Safe, easy, efficient installations without breaking, splitting, or cracking. Long-term performance without costly maintenance or replacement. Constructed with bell-and-spigot ends for soil-tight joints. Features a smooth interior and exterior. Meets the requirements of ASTM F810. Applications: waste management absorption fields, golf course drainage, downspouts, sidewalk "culverts," irrigation ditch enclosures, basement and foundation drainage, temporary plumbing, terrace risers, and waterway terracing.
Lambro 1700 Heat Economizer Bestair A10 Water Pad Genova 30012 Cold Water Pressure Pipe 20 ft
Humidifies air in winter, exhausts air out-of-doors in summer. Converts clothes dryer into an extra source of heat. Saves energy and humidifies during dry months. Includes heat economizer body, mounting bracket, handle and screw, filter, 2 plastic clamps. Dimensions: 8" x 6". Designed for a 4" duct. Sturdy metal construction, replace at least once per season. Replacement Furnace Water Pad fits Aprilaire 110, 220, 500, 550, 550A, 558 (10); BestAir BA3200G; Desert Spring DSP-PFT; Hamilton 12HF (EP037); Thermolec 500/550/Pro 600; Evolution Air Pro3000; Honeywell HE100A, HE150A, HE220A/B, HE225A/B; Lasko 5000L, 5000EC, 6000, Lennox WB2-12, WB212; Chippewa 220. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Arrowhead Brass PK1430 Air Vent Assembly Kit EZ Fasten 010150 Flexible Dryer Vent Pipe Lambro 164W Exhaust Double Sided Under Eave Ventilator
Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series. 4" aluminum male snap-lock fitting and soft-cuff end. Pretreated ends for quicker, easier hook-ups. Sturdy construction meets dryer manufacturer specifications. Plastic double-sided under eave vent adapts to 4" or 6" exhaust ducts; includes (2) removable screens and (1) 6" to 4" transition collar; exhaust only; has backdraft damper and bug screen.
Lambro 3110 Flexible Duct Pipe with (2) Worm Gear Clamps Silverduct UL 10793 Flexible Dryer Transition Duct Lambro 498PL Laminated Dryer Transition Duct
Triple lock design for an airtight seal, flame resistant & durable. Includes: (1) UL listed semi-rigid transition duct and rigid  (2) worm gear clamps. For cloths dryers and can be used to vent 3" or 4" bathroom fans. Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Note: Dryer manufacturers do not recommend venting containing any plastic. UL Listed. Easy to install, fits in tight places where rigid metal ducting will not work.
Genova 40040 Solid Sewer Pipe Genova 40041 Perforated Sewer Pipe NDS 0660SDB Round Grate
Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Use with 6" round basin, 6" corrugated singlewall pipe, or 6" PVC pipe. ADA compliant.
Lambro 301 Flexible Duct Pipe NDS 1241 Draintech Corrugated Drain Fittings Cobra 54 Vent Brush
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. Fits 3" and 4" corrugated pipe; S&D pipe and 4" SDS35 pipe. Fits 9", 12" and 18" catch basins. Cleans dryer ducts from inside the home to outside. 10' dryer duct cleaning brush with plastic handle and coated wire. 4" rigid brush for removing lint blockages. Improves efficiency and saves energy.
Lambro 3120L Flexible Duct Pipe with (2) Worm Gear Clamps Readi-Pipe 110131 Flexible Dryer Transition Duct Genova 300 Cold Water Pressure Pipe 20 ft
Triple lock design for an airtight seal, flame resistant & durable. Includes: (1) UL listed semi-rigid transition duct and rigid  (2) worm gear clamps. For cloths dryers and can be used to vent 3" or 4" bathroom fans. 4" aluminum soft-cuff on both ends. Pre-treated ends are ready to clamp to other components. Sturdy construction meets dryer manufacturer specifications. Includes 2 steel clamps for vent kit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 300 Cold Water Pressure Pipe NDS 101 Single Outlet Round Catch Basin NDS 201 Double Outlet Round Catch Basin
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Designed to act as sump areas to collect debris and help keep pipe lines unclogged. Single and double outlets will fit 3" & 4" S/D pipe, 3" & 4" corrugated, SDR 35 and 4" DWV pipe. Universal outlet adapter included. Designed to act as sump areas to collect debris and help keep pipe lines unclogged. Single and double outlets will fit 3" & 4" S/D pipe, 3" & 4" corrugated, SDR 35 and 4" DWV pipe. Universal outlet adapter included.
Harvey's 014130 Pipe Wrap Bestair A35 Water Pad Builders Best 111716 Vent Hood
High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection. Sturdy metal construction. Replace at least once per season. Replacement Furnace Water Pad fits Aprilaire 350, 360, 560, 560A, 568, 600, 700, 760, 760A, 768 (35);  Honeywell HE200A, HE250A, HE260 A/B, HE265A/B, ME360, HE360A/B, HE365A/B; Lennox WB2-17, WB2-17A, WP2-18,WP2-18A. Plastic vent hood faceplate with 1 piece flapper for clothes dryer and bathroom venting. Fits 4" aluminum pipe (not included). Beveled and weighted design prevents birds from pecking the flapper open and keeps flapper closed during windy conditions. Reversible trim ring allows adjustment of the distance between the faceplate of the hood and the back open ring from .5" to 1.15". Hood can be used for various applications including vinyl siding. White.
Builders Best 110129 Dryer Vent Pipe Marshall 6EPS Trench Drain End Plate Bestair A10W Water Pad
For dryer venting. 4" aluminum Snap-Lock fittings clamp to standard connections or snap without clamps to other Snap-Lock fittings. Compressed to 24" length. Sturdy construction meets dryer manufacturer specifications. Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole. Metal reinforced paper construction. Replace at least twice per season. High Output Water Pad fits Aprilaire 110, 220, 500, 550, 550A, 558 (10); BestAir BA3200G; Desert Spring DSP-PFT, Hamilton 12HF (EP037); Thermolec 500/550/Pro 600; Evolution Air Pro3000; Honeywell HE100A, HE150A, HE220A/B, HE225A/B; Lasko 5000L, 5000EC, 6000, Lennox WB2-12, WB212; Chippewa 220.
Lambro 427 Duct Pipe Genova 300 Cold Water Pressure Pipe 20 ft Marshall 6EPSWH Trench Drain End Plate
Lambro Duct Pipe, 4 in Nominal, 60 in Length, Snap Lock End, Aluminum Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole.
Lambro 302UL Flexible Semi-Rigid Duct Pipe NDS 0902SDB Square Grate With UV Inhibitor Genova 30022 Cold Water Pressure Pipe 20 ft
U. L. listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only. Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required.. Fits 9 x 9 catch basin and 9 x 9 low profile. 27.29 sq.in. open surface area. 5/16" grate opening. 61-175 PSI. ADA compliant. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft Bestair G13 Water Pad Genova 400 Perforated Solvent Weld Sewer and Drain Pipe
Cold water use only. Fits General Furnace Humidifier Models: 709, 990, 1040, 1042, 1137, SL16 (990-13); Hamilton Model: 10HF (EP036); and Williamson Power Model: 500. Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings.
Genova 400 Solid Solvent Weld Sewer and Drain Pipe Lambro 3120UL Flexible Semi-Rigid Duct Pipe with (2) Clamps Lambro 211L Dryer Lint Trap Kit
Extremely resistant to corrosive liquids for use as sewer mains and sewer service. TIO2 ultraviolet inhibitor prevents pipe from becoming brittle due to exposure. Conforms to ASTM D-3033 and D-3034. U. L. listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes 2 clamps. Non-combustible with a maximum operating temperature of 400?F. Polybagged. Alternative to outside venting. Concave bottom for maximum efficiency. Includes 4" x 5' Lama Flex duct, lint trap, screw-on hanger and 2 clamps. This unit uses water to catch the lint.
Lambro 381 Tube Clamp NDS 422G Pop-Up Drain Emitter With Elbow and UV Inhibitor Bestair A35W Water Pad
Used for secure connection to flexible aluminum duct. Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas. Opened by the hydrostatic pressure of water flowing through the drain pipe, the emitter closes as flow diminishes preventing debris and rodents from entering drain system. 4" polyolefin pop-up emitter, center drive pop-up with UV inhibitor, PVC 90 degree elbow with 1/4" drain hole. 40GPM. Replacement furnace humidifier high output water pad. Paper design with metal support. Replace at least twice per season. Fits Aprilaire Models: 350, 360, 560, 560A, 568, 600, 700, 760, 760A, 768 (35);  Honeywell HE200A, HE250A, HE260 A/B, HE265A/B, ME360, HE360A/B, HE365A/B; Lennox WB2-17, WB2-17A, WP2-18,WP2-18A.
BAG LINT COLLECTION DRY VENT  6X10 SOLID SEWER PIPE         DRYER VENT CLEAN JR SYSTEM
6X10 SOLID SEWER PIPE
Our Price: $16.19
Captures loosened lint from the dryer vent while rotary brushing with the  ?LintEater? system. Poly-blend. Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Designed for shorter dryer vents up to 6 ft. in length.  It's easy to use by hand or with your cordless drill and effectively removes dangerous lint build-up.
NDS 0903SDG Atrium Grate With UV Inhibitor Namasco GALV-1/2 Steel Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Made of highest quality structural foam polyethylene with UV inhibitor. For use in all areas of vegetation and trees. Use in non-traffic areas where lawn mowers are excluded. Fits 9" x 9" catch basin No.0906SD2, 0909SD4 and 9" x 9" low profile adapter. No. 0906SD. 26.38 sq.in. open surface area, 1/4"  grate opening. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Genova Products 80031F ABS-DWV Foam Core Pipe SHOCK ABSORBR SUPPLY MIP 1/2IN Fernco FSDP-QUAD Storm Drain Fitting
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer.  Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses.  This absorbs a shock that would normally rattle and shake the pipe. Slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels.?The Quad allows left or right hand extension of the StormDrain Plus or even T and X configurations. The required openings are easily cut out.
NDS 0909SD2 2-Hole Square Catch Basin DRYER VENT EXT KIT 4-3FT RODS Lambro 3006 Rectangular Dryer Vent Duct
A diverse selection of catch basins is available to solve any drainage problem and are used because the larger sump areas are suitable when runoff may contain debris. Two way opening. ] 4 - 3 foot long rods add to your LintEater rotary dryer vent cleaning system for vents longer than 12 feet. Allows the dryer to be as close as 3" away from the wall.
Lambro 414 Flexible Laminated Dryer Transition Duct Master Flow 12WVA4B Round Wall Ventilator Lambro 3005 Rectangular Dryer Vent Duct
2 sided, five layer foil laminate. Master Flow wall vents are used for the outside sidewall termination of kitchen, bath fans, range hoods, microwave venting, or dryer exhausts. Wall vents are easy to install. Allows the dryer to be as close as 3" away from the wall.
Anderson Metals 59540-0612 Oil Drum and Tank Valve Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft Lambro 370 Dryer Vent Hood with Damper
3/4" mip x 3/8" flare. Cold water use only. Galvanized vent hood with damper
Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft Namasco GALV-3/4 Steel Pipe Genova Products 80041F ABS-DWV Foam Core Pipe
Cold water use only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Arrowhead PK1390 Replacement Self-Draining Vacuum Breaker Zero Periscope 110172 Adjustable Dryer Vent Duct Genova 300 Cold Water Pressure Pipe
Replacement self-draining vacuum breaker for Arrowhead frost free hydrant. Fits all models with BFPSD after part number (backflow preventer, self draining) and 485BFP and 486BFP models. Nickel plated. Use where outlets overlap or are very close. Adjusts to reach the side of most dryers. Rigid aluminum construction meets dryer manufacturer specifications and building codes. Contains: 4" male snap-lock fitting and 4" collar. For dryer connection as close as 2" from the wall. Sections are not reversible. Draw band female collar. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
Namasco .25X10G Steel Pipe Genova 400 Perforated Sewer and Drain Pipe With Green Gasket Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Green color for quick in-ground identification. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. Cold water use only.
NDS 1212SD2 2-Hole 2-Way Square Catch Basin Namasco .375X10G Steel Pipe Eastman 60248 Dual Outlet Washing Machine Outlet Box
A diverse selection of catch basins is available to solve any drainage problem and are used because the larger sump areas are suitable when runoff may contain debris. Two way opening. ] Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. 3/4" MHT outlet, UPC
Namasco GALV-1 Steel Pipe 2X20SCH80 PR.PIPE(GRY) NOBELL B&K 109-224 Drum and Barrel Faucet
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Use for kpressure applications. Cold water only. 400PSI Heavy bronze construction. Quarter turn operation. Lockable handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7.
Eastman 60245 Dual Outlet Washing Machine Outlet Box Eastman 60243 Dual Outlet Washing Machine Outlet Box Eastman 60244/38937 Washing Machine Outlet Box With Valve
3/4" MHT outlet, UPC 3/4" MHT outlet, UPC Right or left side drain, 1/4 Turn ball valve installed. 1/2"CPVC
Lambro 1790 Dryer Outlet Boxes Draintech 1202SDB Drain Grate Genova 400 Solid Solvent Weld Sewer and Drain Pipe
12" x 20" dryer wall box. Prevents duct from being crushed, Flame resistant material, fits between studs and is a space saver. Includes wall  unit and wall trim plate. Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Not for use in areas subject to vehicular traffic. Fits 12 x 12 catch basin series and 12 x 12 low profile adapters. 51.79 sq.in. open surface area. 5/16" grate opening. 61-175 PSI. ADA compliant. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034.
DRYER VENT CLEAN SYSTEM 10PC  Namasco GALV 1/2 Steel Pipe Watts WPWME-1 Washing Machine Outlet Box With Valve
Removes dangerous lint build up. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Comes complete with two individual 1/4-turn brass valves and white protective enclosure with faceplate. Valves are fitted for standard washing machine hose and 1/2" WaterPEX CrimpRing fittings. Design allows for left, center or right valve and waste mounting. The 6-1/2 x 7-5/8" x 3" enclosure comes complete with brackets for nailing to house framing. (Hoses sold separately).
Namasco 1.25X10G Steel Pipe Genova 300 Cold Water Pressure Pipe Oatey Quadtro 38529/38934 Washing Machine Outlet Box
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Quadtro quarter-turn valves, copper sweat. Can be used in commercial or residential applications which require supply valve and waste drain recessed into the wall. Versatile design allows for right, left, or center drain and bottom or top mount valves. Easily installed and removed test cap does not fall into drain. 2" drain opening fits PVC or ABS Sch 40 DWV pipe. 1/4 turn brass ball valve. Copper sweat. Box made of high impact polystyrene, 4 support brackets included for mounting. Snap-on faceplate frame accomodates up to 1 in. drywall. Easy to remove knockout.
Oatey Quadtro 38568/38822 Washing Machine Outlet Box Oatey Quadtro 38528 Washing Machine Outlet Box WASHER OUTLET BOX 1/4 TURN
Quadtro single lever ball valve, copper sweat. Can be used in commercial or residential applications which require supply valve and waste drain recessed into the wall. Versatile design allows for right, left, or center drain and bottom or top mount valves. Easily installed and removed test cap does not fall into drain. 2" drain opening fits PVC or ABS Sch 40 DWV pipe. single lever valve. Copper sweat. Box made of high impact polystyrene, 4 support brackets included for mounting. Snap-on faceplate frame accomodates up to 1 in. drywall. Easy to remove knockout. Quadtro 1/4-turn valves, 1/2" ASTM F1807 PEX.. Can be used in commercial or residential applications which require supply valve and waste drain recessed into the wall. Versatile design allows for right, left, or center drain and bottom or top mount valves. Easily installed and removed test cap does not fall into drain. 2" drain opening fits PVC or ABS Sch 40 DWV pipe. 1/4 turn brass ball valve. Box made of high impact polystyrene, 4 support brackets included for mounting. Snap-on faceplate frame accomodates up to 1 in. drywall. Easy to remove knockout. The Quadtro Push Connect washing machine outlet box is the ultimate solution for installation flexibility.  Makes joining copper, CVPC or PEX pipe simple and fast without soldering, crimping, or solvent welding.  Includes disconnect tool.  Allows for right, left, or center drain and bottom or top mount valves.
Namasco 1.5X10G Steel Pipe Namasco GALV 3/4 Steel Pipe Fernco FSDP-CHGG Storm Drain Fitting
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. StormDrain Plus ensures a long-lasting, permanent solution to the collection and dispersal of standing surface water. Easy installation. Ideal for dirveways, pools, patios, walkways, sports courts, and more. UV inhibited. Grates are ADA and heel-guard compliant. No clips or screws required. 39.5" L
Genova 400 Solid Sewer and Drain Pipe With Green Gasket Namasco 2X10G Steel Pipe Namasco GALV 1 Steel Pipe
Green color for quick in-ground identification. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Lambro 228 Dryer Vent Pipe Namasco GALV 11/4 Steel Pipe Lambro 229 Dryer Vent Pipe
Lambro Dryer Vent Pipe, 3 in Nominal, 24 in Length, Snap Lock End, Aluminum Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Lambro Dryer Vent Pipe, 4 in Nominal, 24 in Length, Snap Lock End, Aluminum
Namasco GALV 11/2 Steel Pipe Fernco FSDP-GP3G Storm Drain Garage Namasco GALV 2 Steel Pipe
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. StormDrain Plus ensures a long-lasting, permanent solution to the collection and dispersal of standing surface water. Grates are ADA andheel-guard compliant. UV inhibited. No clips or screws required. Contractor Pack contains: 3 pieces of grey channel with grate, 1 end cap & 1 end outlet. 39.5" L Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Marshall 6TDSG4 Trench Drain Steel Grate
Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole.
   
 
1