Home > HEATING & COOLING > HEAT & AIR CONDITIONING > AIR FILTRATION > ROOM AIR CONDITIONER FILTERS
Sort By:
1
Genova 300 Cold Water Pressure Pipe 10 ft Genova 31007 Cold Water Pressure Pipe 10 ft Anderson Metal 757001-0402 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Genova 315057 Solid Wall Cold Water Pressure Pipe 5 ft Genova 31010 Cold Water Pressure Pipe 10 ft Anderson Metal 757001-0202 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Genova 300 Pipe Anderson Metal 757014-04 Insert Fittings Draintech 0440SDB Round Drain Grate
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. ADA compliant. Dual Wall, SDR 35, 2729 S&D
Anderson Metal 757001-0602 Insert Fittings Genova 315077 Solid Wall Cold Water Pressure Pipe 5 ft Anderson Metal 757014-06 Insert Fittings
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Pipe Anderson Metal 757014-05 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757001-0404 Insert Fitting Anderson Metal 757014-03 Insert Fittings Genova 30007 Cold Water Pressure Pipe 20 ft
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Anderson Metal 757001-0604 Insert Fittings NDS 0633SD Corrugated Drain Fittings Genova 315107 Solid Wall Cold Water Pressure Pipe 5 ft
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. NDS Universal Plug Adapter, 6 in Length Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Draintech 0440SDG Round Drain Grate Anderson Metal 757001-0804 Insert Fittings Genova 300 Pipe
Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. ADA compliant. Dual Wall, SDR 35, 2729 S&D Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Anderson Metal 757001-0606 Insert Fitting Genova 30010 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 31011 Cold Water Pressure Pipe 10 ft Genova 31012 Cold Water Pressure Pipe 10 ft Anderson Metal 757014-08 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Genova 300 Pipe Anderson Metal 757001-0806 Insert Fitting Anderson Metal 757014-10 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Cardel 1/2X2 Copper Tubing Draintech 0642SDB Square Drain Grate NDS 1245 Corrugated Drain Fittings
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Grates fit directly into Sewer & Drain pipe or fittings, and Corrugated pipe without the use of a coupling. Not for use in areas subject to vehicular traffic. Fits 6" corrugated single wall and dual pipe, SDR 35, 2729 S&D and Triple Wall pipe. 18.9 sq.in. open surface area. 1/4" grate opening. 0-60 PSI. (BLACK) Can also be used with 6" round catch basins. ADA COMPLIANT. Fits 3" x  4" corrugated pipe, 3" & 4" S/D pipe and 4" SDR35 pipe. Offset allows for adjusting inlet height. Adapters fit 9 x 9, 12 x 12, 18 x 18, 24 x 24 catch basins, and all low profile series.
Anderson Metal 757001-1006 Insert Fittings Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 300 Cold Water Pressure Pipe Lamaflex 411 Flexible Tube Anderson Metal 757001-0808 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Aluminum film laminate. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 400 Solid Solvent Weld Sewer and Drain Pipe Draintech 0443SDB Atrium Drain Grate
Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. Dual Wall, SDR 35, 2729 S&D
Anderson Metal 757001-1208 Insert Fittings Anderson Metal 757001-1212 Insert Fitting Anderson Metal 757001-0608 Insert Fitting
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757001-1008 Insert Fitting Genova 300 Cold Water Pressure Pipe Cardel 1/2X2 Copper Tubing
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 300 Cold Water Pressure Pipe 20 ft Lambro 3003L Quick Fit Elbow Kit Cardel 3/4X2 Copper Tubing
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Kit for clothes dryer installations. Includes white plastic 90 degree elbow with rubber gasket inside one side and 4" metal worm gear clamp. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Lambro 302L Flexible Semi-Rigid Duct Pipe Lambro 495P Flexible Laminated Dryer Transition Duct Genova 30012 Cold Water Pressure Pipe 20 ft
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. UL listed. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Lamaflex 412 Flexible Tube Genova 40040 Solid Sewer Pipe Genova 40041 Perforated Sewer Pipe
Aluminum film laminate. Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings.
Lamaflex 418 Flexible Tube NDS 1243 Storm Drain Fittings Fernco FSDP-EO Storm Drain Fitting
Aluminum film laminate. Includes 2 plastic clamps. Use to attach 3" or 4" pipe to any size NDS drain basin where a straight-line connection is needed. Works as a locking fitting to 3" or 4" Corrugated Pipe; as a snuggle fitting to 3" or 4" PVC or leach pipe. Manufactured using rigid, lightweight polyolefins. End outlet slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels. End outlet accommodates 3" & 4" sewer and drain pipe or 3" & 4" Sch. 40 fitting hub.
Fernco FSDP-EC Storm Drain Fitting NDS 0663SDG Round Atrium Grate With UV Inhibitor Anderson Metal 757001-0302 Insert Fittings
Fernco FSDP-EC End Cap
Our Price: $8.44
The StormDrain Plus end cap slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels. Made of highest quality structural foam polyethylene with UV inhibitor. For use in all areas of vegetation and trees. Use in non-traffic areas where lawn mowers are excluded. 6" fits 6" S/ D pipe fittings, 6" bell end, 6" corrugated and 6" catch basins. Open surface area 23.91 sq.in. 5/16" grate opening. D, SDR 35, 2729 S&D Triple wall. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Cardel Industries 1/2X5 Copper Tubing Genova 300 Cold Water Pressure Pipe 20 ft Lambro 1369B Louvered Dryer Vent Kit
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Lambro 1369W Louvered Dryer Vent Kit Hancor 0455010 Single Wall Pipe 10 ft Hancor DW2ER040010 Perforated Regular Single Wall Pipe 10 ft
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Made with a white high density polyethylene layer around a black polyethylene core to form a lightweight pipe with excellent beam stiffness. Unaffected by extended exposure to the sun's heat and ultraviolet radiation. Immune to freeze/thaw conditions and continuous subzero temperatures. Corrosion resistant to acids, alkalies, and salts. Will not rust. Safe, easy, efficient installations without breaking, splitting, or cracking. Long-term performance without costly maintenance or replacement. Constructed with bell-and-spigot ends for soil-tight joints. Features a smooth interior and exterior. Meets the requirements of ASTM F810. Applications: waste management absorption fields, golf course drainage, downspouts, sidewalk "culverts," irrigation ditch enclosures, basement and foundation drainage, temporary plumbing, terrace risers, and waterway terracing. Made with a white high density polyethylene layer around a black polyethylene core to form a lightweight pipe with excellent beam stiffness. Unaffected by extended exposure to the sun's heat and ultraviolet radiation. Immune to freeze/thaw conditions and continuous subzero temperatures. Corrosion resistant to acids, alkalies, and salts. Will not rust. Safe, easy, efficient installations without breaking, splitting, or cracking. Long-term performance without costly maintenance or replacement. Constructed with bell-and-spigot ends for soil-tight joints. Features a smooth interior and exterior. Meets the requirements of ASTM F810. Applications: waste management absorption fields, golf course drainage, downspouts, sidewalk "culverts," irrigation ditch enclosures, basement and foundation drainage, temporary plumbing, terrace risers, and waterway terracing.
Cardel 3/4X2 Copper Tubing Genova 300 Cold Water Pressure Pipe 20 ft EZ Fasten 010150 Flexible Dryer Vent Pipe
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. 4" aluminum male snap-lock fitting and soft-cuff end. Pretreated ends for quicker, easier hook-ups. Sturdy construction meets dryer manufacturer specifications.
Lambro 1365W Preferred Hood Dryer Vent Kit Lambro 1365B Preferred Hood Dryer Vent Kit Lambro 3110 Flexible Duct Pipe with (2) Worm Gear Clamps
Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Triple lock design for an airtight seal, flame resistant & durable. Includes: (1) UL listed semi-rigid transition duct and rigid  (2) worm gear clamps. For cloths dryers and can be used to vent 3" or 4" bathroom fans.
Genova 300 Cold Water Pressure Pipe Silverduct UL 10793 Flexible Dryer Transition Duct Lambro 498PL Laminated Dryer Transition Duct
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Listed and labeled as UL foil dryer transition duct. Steel wire supported, multiply design of aluminum and polyester. Note: Dryer manufacturers do not recommend venting containing any plastic. UL Listed. Easy to install, fits in tight places where rigid metal ducting will not work.
Cambridge-Lee 1/2X10M Type M Water Tube NDS 0660SDB Round Grate Lambro 1359B Louvered Dryer Vent Kit
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Use with 6" round basin, 6" corrugated singlewall pipe, or 6" PVC pipe. ADA compliant. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Lambro 301 Flexible Duct Pipe NDS 1241 Draintech Corrugated Drain Fittings Anderson Metal 757001-0304 Insert Fittings
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. Fits 3" and 4" corrugated pipe; S&D pipe and 4" SDS35 pipe. Fits 9", 12" and 18" catch basins. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Lambro 1377W Louvered Dryer Vent Kit LamaFlex 406W Louvered Dryer Vent Kit Lambro 3120L Flexible Duct Pipe with (2) Worm Gear Clamps
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Includes: (1) Louvered vent with tail pipe, (1)  laminated duct, (1)trim plate and 2 adjustable nylon clamps. Triple lock design for an airtight seal, flame resistant & durable. Includes: (1) UL listed semi-rigid transition duct and rigid  (2) worm gear clamps. For cloths dryers and can be used to vent 3" or 4" bathroom fans.
Lambro 1373B Preferred Hood Dryer Vent Kit Lambro 1373W Preferred Hood Dryer Vent Kit Readi-Pipe 110131 Flexible Dryer Transition Duct
Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. 4" aluminum soft-cuff on both ends. Pre-treated ends are ready to clamp to other components. Sturdy construction meets dryer manufacturer specifications. Includes 2 steel clamps for vent kit.
Lambro 1359W Louvered Dryer Vent Kit Genova 30022 Cold Water Pressure Pipe 20 ft NDS 101 Single Outlet Round Catch Basin
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Designed to act as sump areas to collect debris and help keep pipe lines unclogged. Single and double outlets will fit 3" & 4" S/D pipe, 3" & 4" corrugated, SDR 35 and 4" DWV pipe. Universal outlet adapter included.
NDS 201 Double Outlet Round Catch Basin LamaFlex 407W Dryer Vent Kit Lambro 1379B Louvered Dryer Vent Kit
Designed to act as sump areas to collect debris and help keep pipe lines unclogged. Single and double outlets will fit 3" & 4" S/D pipe, 3" & 4" corrugated, SDR 35 and 4" DWV pipe. Universal outlet adapter included. Includes: (1) Louvered vent with tail pipe, (1)  laminated duct, (1)trim plate and 2 adjustable nylon clamps. Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps.
Lambro 1379W Louvered Dryer Vent Kit Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 400 Solid Solvent Weld Sewer and Drain Pipe
Includes: 1 - louvered vent with tail pipe, 1 - UL listed laminated transition duct, 1 - trim plate and 2 - tension clamps. Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Extremely resistant to corrosive liquids for use as sewer mains and sewer service. TIO2 ultraviolet inhibitor prevents pipe from becoming brittle due to exposure. Conforms to ASTM D-3033 and D-3034.
Lambro 1375W Preferred Hood Dryer Vent Kit Lambro 1375B Louvered Dryer Vent Kit Cardel Industries 1/2X5 Copper Tubing
Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Includes: (1) ? 4? brown plastic preferred hood vent with 11? tail pipe, (1) ? 4? brown plastic trim plate. (1) ? 4? x 8' ul 2158a laminated transition duct, and (2) ? 4? galvanized tension clamps. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Builders Best 110129 Dryer Vent Pipe Marshall 6EPS Trench Drain End Plate Lambro 427 Duct Pipe
For dryer venting. 4" aluminum Snap-Lock fittings clamp to standard connections or snap without clamps to other Snap-Lock fittings. Compressed to 24" length. Sturdy construction meets dryer manufacturer specifications. Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole. Lambro Duct Pipe, 4 in Nominal, 60 in Length, Snap Lock End, Aluminum
6X10 SOLID SEWER PIPE         Marshall 6EPSWH Trench Drain End Plate Lambro 302UL Flexible Semi-Rigid Duct Pipe
6X10 SOLID SEWER PIPE
Our Price: $12.93
Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole. U. L. listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Without clamps. Bulk packed only.
Genova 300 Cold Water Pressure Pipe 20 ft Cardel Industries 3/4X5 Copper Tubing Anderson Metal 757001-0504 Insert Fittings
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
NDS 0902SDB Square Grate With UV Inhibitor Protect Plus G24201 Hammock Roll Air Filter Lambro 316W Dryer Vent Kit
Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required.. Fits 9 x 9 catch basin and 9 x 9 low profile. 27.29 sq.in. open surface area. 5/16" grate opening. 61-175 PSI. ADA compliant. Blue/white rigid fiberglass with light lamination on downstream side. Designed for residential, light industrial and commercial applications. Includes semi-rigid flexible aluminum duct, 4" ring plate, 2 worm gear clamps and preferred hood.
Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft Lambro 280 Dryer Vent Kit with Spring Lambro 3120UL Flexible Semi-Rigid Duct Pipe with (2) Clamps
Cold water use only. Includes aluminum preferred hood, length of UL transition duct, 4" aluminum ring plate and 2 metal tension clamps. U. L. listed for clothes dryer connection. Aluminum semi-rigid flexible duct. Includes 2 clamps. Non-combustible with a maximum operating temperature of 400?F. Polybagged.
Cambridge-Lee 1/2X10L Type L Water Tube NDS 422G Pop-Up Drain Emitter With Elbow and UV Inhibitor Cambridge-Lee 3/4X10M Type M Water Tube
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas. Opened by the hydrostatic pressure of water flowing through the drain pipe, the emitter closes as flow diminishes preventing debris and rodents from entering drain system. 4" polyolefin pop-up emitter, center drive pop-up with UV inhibitor, PVC 90 degree elbow with 1/4" drain hole. 40GPM. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
NDS 0903SDG Atrium Grate With UV Inhibitor Anderson Metal 757002-0606 Insert Fittings Anderson Metal 757002-0604 Insert Fittings
Made of highest quality structural foam polyethylene with UV inhibitor. For use in all areas of vegetation and trees. Use in non-traffic areas where lawn mowers are excluded. Fits 9" x 9" catch basin No.0906SD2, 0909SD4 and 9" x 9" low profile adapter. No. 0906SD. 26.38 sq.in. open surface area, 1/4"  grate opening. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757002-0404 Insert Fittings Lambro 313WUL Louvered Dryer Vent Kit Fernco FSDP-QUAD Storm Drain Fitting
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 1 - 4" white plastic louvered vent with tail pipe. 1 - 4" x 8' semi-rigid transition duct - UL listed. 2 - galvanized worm gear clamps. 1 - trim plate. Slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels.?The Quad allows left or right hand extension of the StormDrain Plus or even T and X configurations. The required openings are easily cut out.
Anderson Metal 757002-0406 Insert Fittings NDS 0909SD2 2-Hole Square Catch Basin Ultra Seal 289W Dryer Vent Closure
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. A diverse selection of catch basins is available to solve any drainage problem and are used because the larger sump areas are suitable when runoff may contain debris. Two way opening. ] Heated dryer exhaust air lifts interior floating vent cover. Air escapes out of bottom vent. Keeps hot or cold air out. Keeps birds and other animals outside.
Anderson Metal 757002-0804 Insert Fittings Lambro 316WUL Preferred Hood Dryer Vent Kit Lambro 3006 Rectangular Dryer Vent Duct
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 1 - 4" white plastic preferred hood with tail pipe. 1 - 4" x 8' semi-rigid transition duct - UL listed. 2 - galvanized worm gear clamps.  1 - removable screen. 1 - trim plate. Allows the dryer to be as close as 3" away from the wall.
Lambro 414 Flexible Laminated Dryer Transition Duct Anderson Metal 757002-0504 Insert Fittings Anderson Metal 757002-0202 Insert Fittings
2 sided, five layer foil laminate. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Protect Plus G30201 Hammock Roll Air Filter Cardel 3/4X5 Copper Tubing Lambro 3005 Rectangular Dryer Vent Duct
Blue/white rigid fiberglass with light lamination on downstream side. Designed for residential, light industrial and commercial applications. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Allows the dryer to be as close as 3" away from the wall.
Anderson Metal 757001-0506 Insert Fittings Anderson Metal 757001-0406 Insert Fittings Cardel Industries 1/2X20M Copper Tubing
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Protect Plus G36201 Hammock Roll Air Filter Genova 300 Cold Water Pressure Pipe Lambro 4004 Quick Connect Vent Kit
Blue/white rigid fiberglass with light lamination on downstream side. Designed for residential, light industrial and commercial applications. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Includes length of flexible aluminum duct, 2 plastic 90-degree elbow, one marked "A" and "B" both with rubber gasket. Rubber gasket secures elbow to dryer or vent hood. No clamp needed.
2X20SCH80 PR.PIPE(GRY) NOBELL Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft Anderson Metal 757001-0204 Insert Fittings
Use for kpressure applications. Cold water only. 400PSI Cold water use only. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Genova 400 Perforated Sewer and Drain Pipe With Green Gasket Anderson Metal 757002-0806 Insert Fittings Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft
Green color for quick in-ground identification. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Cold water use only.
Zero Periscope 110172 Adjustable Dryer Vent Duct Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft NDS 1212SD2 2-Hole 2-Way Square Catch Basin
Use where outlets overlap or are very close. Adjusts to reach the side of most dryers. Rigid aluminum construction meets dryer manufacturer specifications and building codes. Contains: 4" male snap-lock fitting and 4" collar. For dryer connection as close as 2" from the wall. Sections are not reversible. Draw band female collar. Cold water use only. A diverse selection of catch basins is available to solve any drainage problem and are used because the larger sump areas are suitable when runoff may contain debris. Two way opening. ]
Cambridge-Lee 3/4X10L Type L Water Tube Anderson Metal 757001-0408 Insert Fittings Genova 400 Solid Solvent Weld Sewer and Drain Pipe
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034.
Anderson Metal 757020-0604 Insert Fittings Draintech 1202SDB Drain Grate Cardel Industries 1/2X20L Copper Tubing
Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Not for use in areas subject to vehicular traffic. Fits 12 x 12 catch basin series and 12 x 12 low profile adapters. 51.79 sq.in. open surface area. 5/16" grate opening. 61-175 PSI. ADA compliant. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Anderson Metal 757002-0608 Insert Fittings Anderson Metal 757002-0808 Insert Fittings Anderson Metal 757002-0506 Insert Fittings
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Cardel Industries 3/4X20M Copper Tubing Genova 300 Cold Water Pressure Pipe Anderson Metal 757001-0812 Insert Fittings
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Cardel Industries 01075 Copper Tubing Genova 400 Solid Sewer and Drain Pipe With Green Gasket Fernco FSDP-CHGG Storm Drain Fitting
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Green color for quick in-ground identification. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. StormDrain Plus ensures a long-lasting, permanent solution to the collection and dispersal of standing surface water. Easy installation. Ideal for dirveways, pools, patios, walkways, sports courts, and more. UV inhibited. Grates are ADA and heel-guard compliant. No clips or screws required. 39.5" L
Cardel Industries 3/4X20L Copper Tubing Cardel Industries 01082 Copper Tubing Frost King F1524 Open Cell Air Filter
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Air Conditioner foam filter.  Removes dust and pollen from the air.  Washable and re-usable.  Can be cut to any size with ordinary scissors
Protect Plus 0120301 Air Filter Cardel Industries 01095 Copper Tubing Lambro 228 Dryer Vent Pipe
Rigid, self-supporting, latex coated organic material with scrim backing. Fits practically any furnace/air conditioning system. Trims with household scissors. Reusable. Vacuum or wash as needed. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Lambro Dryer Vent Pipe, 3 in Nominal, 24 in Length, Snap Lock End, Aluminum
Lambro 229 Dryer Vent Pipe Cardel 01108 Copper Tubing Fernco FSDP-GP3G Storm Drain Garage
Lambro Dryer Vent Pipe, 4 in Nominal, 24 in Length, Snap Lock End, Aluminum Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. StormDrain Plus ensures a long-lasting, permanent solution to the collection and dispersal of standing surface water. Grates are ADA andheel-guard compliant. UV inhibited. No clips or screws required. Contractor Pack contains: 3 pieces of grey channel with grate, 1 end cap & 1 end outlet. 39.5" L
Protect Plus AL11524.25 Air Filter Marshall 6TDSG4 Trench Drain Steel Grate Cardel Industries 01115 Copper Tubing
Filter media pad can be easily cut to fit any window or wall mounted room air conditioner. Made completely from expanded aluminum mesh. Can be washed and re-used several times. Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
True Blue PG11524.25 Air Filter
Washable/3 year life, rigid self-supporting.  Made in the USA!
   
 
1