Home > HEATING & COOLING > HEAT & AIR CONDITIONING > DUCT WORK > DUCT ACCESSORIES
Choose a sub category:
PIPE CEMENTS SUMP PUMPS SUMP PUMPS
PIPE CLEANERS & PRIMERS SUMP PUMP PARTS & ACCESSORIES SUMP PUMP PARTS & ACCESSORIES
THREAD SEALANT COMPOUNDS UTILITY PUMPS UTILITY PUMPS
THREAD SEALANT TAPES TRASH / SEWAGE PUMPS TRASH / SEWAGE PUMPS
GAS LEAK DETECTORS MISC NON-WELL PUMPS MISC NON-WELL PUMPS
DISCHARGE & SUCTION HOSES DISCHARGE & SUCTION HOSES PLUMBERS PUTTY
DRILL PUMPS DRILL PUMPS PLUMBING EPOXYS
Sort By:
1
Genova 300 Cold Water Pressure Pipe 10 ft Genova 315057 Solid Wall Cold Water Pressure Pipe 5 ft Genova 31007 Cold Water Pressure Pipe 10 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Harvey's 043010 Plumbers Putty Genova 315077 Solid Wall Cold Water Pressure Pipe 5 ft Mueller ProLine Quarter Turn Solvent Ball Valve
Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Harvey's 023015-48 Pipe Joint Compound Genova 31010 Cold Water Pressure Pipe 10 ft
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 300 Pipe Harvey 030005-144 Pipe Thread Compound Oatey 31166 Plumbers Putty
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.
Sta Put 25101 Non-Mastic Plumbers Putty Genova 300 Pipe Oatey 31229 Great White
Molds easily, and will not harden, crumble, crack or shrink. A flexible, stretchable compound for professional use in setting bowls, fixtures, faucets, basin cocks, strainers, plugs, sink frames and all other sealing and caulking applications. Provides a watertight seal. Will not stick to hands. Excellent low temperature properties. Meets Fed. Spec. A-A-3110 (formerly TT-P-1536A). Not for use on porous surfaces. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 315107 Solid Wall Cold Water Pressure Pipe 5 ft Harvey's 044010 Epoxy Putty
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Oatey 42783 Cover Plates Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
6" stainless steel cover plate conceals the clean-out plug access hole. Screw included. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Genova 30007 Cold Water Pressure Pipe 20 ft Harvey's 029035 Pipe Thread Compound
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle.
Mueller ProLine Quarter Turn Ball Valve Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Genova 300 Pipe
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Plumb Pak PP854-2 Pipe Joint Compound Anderson 738107-06 Pipe Elbow Anderson 738107-02 Pipe Elbow
Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Anderson Pipe Elbow, Series: 738107-06, 3/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-02, 1/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 738107-04 Pipe Elbow Imperial GV0748 Round Damper With Duct Key Rectorseal 25790 Pipe Thread Sealant
Anderson Pipe Elbow, Series: 738107-04, 1/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Use to adjust and balance airflow in individual runs of round pipe. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Genova 31011 Cold Water Pressure Pipe 10 ft Oatey 185 Cleanout Plug With Raised Head Oatey 31177 Stain-Free Plumbers Putty
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Brass cleanout plug with raised square head for use with slip joint pliers. Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily.
Genova 31012 Cold Water Pressure Pipe 10 ft Harvey's 044150-12 Epoxy Putty Genova 30010 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 300 Cold Water Pressure Pipe 20 ft Mueller ProLine Quarter Turn Ball Valve Mueller 107-342NL Full Port Ball Valve
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Anderson 38310-06 Pipe Nipple Oatey 31230 Great White Anderson 738107-08 Pipe Elbow
Anderson Pipe Nipple, Series: 38310-06, 3/8 in Nominal, MPT End, Close Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Pipe Elbow, Series: 738107-08, 1/2 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Imperial GV0957-B Side Take-Off Harvey's 043050 Plumbers Putty Brass Craft PS1087 Seal 'N Check Kit
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Oatey 185 Cleanout Plug With Raised Head
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Brass cleanout plug with raised square head for use with slip joint pliers.
Plumb Pak PP854-1 Pipe Thread Sealant Mueller ProLine Quarter Turn Ball Valve Harvey's 023030 Pipe Joint Compound
Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Oatey 185 Cleanout Plug With Raised Head Genova 300 Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Brass cleanout plug with raised square head for use with slip joint pliers. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 300 Cold Water Pressure Pipe Harvey's 025020 Pipe Thread Compound PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. NSF rating, signifying it safe for contact with potable water. Works wet or dry.
Oatey Fix-It Epoxy Putty Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve
For sealing, patching and mending compound. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Perfect for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Genova 300 Cold Water Pressure Pipe 20 ft Harvey's 043105 Plumbers Putty
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Full Port Ball Valve Anderson 38310-0620 Pipe Nipple
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Anderson Pipe Nipple, Series: 38310-0620, 3/8 in Nominal, MPT End, 2 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines
Genova 300 Cold Water Pressure Pipe Mueller ProLine Quarter Turn Solvent Ball Valve Rectorseal 31631 Tru-Blu
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732.
Rectorseal 23631 T-Plus 2 Harvey's 029048 Pipe Thread Compound PlumbPak PP33-10PCLF Pipe Nipple
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Carded.
Oatey 15420 Pro Dope Mueller ProLine Quarter Turn Ball Valve Anderson 738124-08 Street Pipe Elbow
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Anderson Street Pipe Elbow, Series: 738124-08, 1/2 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Rectorseal 25631 Pipe Thread Sealant Mueller ProLine Full Port Ball Valve Oatey 15804 Hercules Pipe Thread Sealant
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732.
Anderson 738107-12 Pipe Elbow Genova 300 Cold Water Pressure Pipe 20 ft Mueller ProLine Quarter Turn Ball Valve
Anderson Pipe Elbow, Series: 738107-12, 3/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
Mueller ProLine Full Port Ball Valve PlumbPak PP33-40PCLF Pipe Nipple Mueller ProLine Full Port Ball Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Carded. Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Apollo APXV1212 Quarter Turn Ball Valve Mueller ProLine Full Port Ball Valve Anderson 738124-12 Street Pipe Elbow
Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Anderson Street Pipe Elbow, Series: 738124-12, 3/4 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Harvey's 023045 Pipe Joint Compound Harvey's 025050 Pipe Thread Compound DUCT REDUCER 4IN - 3IN 30GA
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
Anderson 38310-0825 Pipe Nipple Oatey 185 Cleanout Plug With Raised Head Anderson 38310-0630 Pipe Nipple
Anderson Pipe Nipple, Series: 38310-0825, 1/2 in Nominal, MPT End, 2-1/2 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines Brass cleanout plug with raised square head for use with slip joint pliers. Anderson Pipe Nipple, Series: 38310-0630, 3/8 in Nominal, MPT End, 3 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines
Genova 30012 Cold Water Pressure Pipe 20 ft Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve Oatey 34055 Plumbing Access Panel
Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled.
Oatey 15427 Pro Dope Oatey 185 Cleanout Plug With Raised Head Oatey 1023 Drum Trap Covers
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Brass cleanout plug with raised square head for use with slip joint pliers. 3-1/4"-4" adjustable drum trap cover with 5-1/4" stainless steel cover and rubber gasket.
Oatey 34045 Plumbing Access Panel Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Ball Valve
Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
VALVE BALL 1-1/2IN S80 SOLVENT Genova 300 Cold Water Pressure Pipe DUCT REDUCER 6IN - 4IN 30GA
Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
DUCT REDUCER 7IN - 6IN 28GA   DUCT REDUCER 6IN - 5IN 30GA   Mueller ProLine Full Port Ball Valve
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61.
Oatey 15806 Hercules Pipe Thread Sealant Genova 300 Cold Water Pressure Pipe 20 ft Rectorseal 25551 Pipe Thread Sealant
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Frost King SP55/6 Foil Fiberglass Wrap 15 ft L x 2 in T Apollo APXV3434 Quarter Turn Ball Valve
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Foil and fiberglass wrap for heating and air conditioning ducts. Cushions and reduces vibrations. Can be taped securely in place. 12" Wide x 2" Thick x 15' Long. Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
VALVE BALL 1/2IN F1960        Fluidmaster AP0808 Access Panels Genova 300 Cold Water Pressure Pipe 20 ft
Easy to install, no framing required, works in walls and ceilings up to 3/4" thick, pops in and out of position, no visible clamps or screws. Great for spa pumps, security systems, computer-audio-tv cables. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Oatey 185 Cleanout Plug With Raised Head Oatey 34056 Plumbing Access Panel Mueller ProLine Full Port Ball Valve
Brass cleanout plug with raised square head for use with slip joint pliers. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Imperial GV0945-C Adjustable Round Duct Take Off Protect Plus G24201 Hammock Roll Air Filter Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft
Used for transition from rectangular duct to round pipe or insulated flexible duct. Adjustable from 0 Deg.  to 90 Deg. (.30 gauge). Blue/white rigid fiberglass with light lamination on downstream side. Designed for residential, light industrial and commercial applications. Cold water use only.
Genova 30022 Cold Water Pressure Pipe 20 ft Mueller ProLine Full Port Ball Valve Namasco BLACK-1/2 Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Imperial GV0959-C Side Take-Off VALVE BALL 3/4IN F1960        Mueller ProLine Full Port Ball Valve
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Patton HAPF30ATPDQ-U4 Air Replacement Filter Harvey's 025080 Pipe Thread Compound Namasco .25X10B Steel Pipe
HEPA - type technology removes up to 99% of airborne pollutants. Traps and Locks 30% more dust and particles from your home. Contains Arm and Hammer baking soda for odor elimination. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Oatey 15808 Hercules Pipe Thread Sealant Genova 300 Cold Water Pressure Pipe 20 ft NDS WSU-1520-S Full Port Pool Diverter Single Union Ball Valve
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Full port design, preset at 5 psi or 12 feet of head and can be adjusted to 14 psi or 32 feet of head, combination of 1-1/2" socket and 2" spigot on each end can be used on both sizes of pipe, single union design for easy serviceability, EPDM o-ring, meets/exceeds ASTM & Ansi STANDARDS. Bulk.
Fluidmaster AP1414 Access Panels Mueller ProLine Full Port Ball Valve Harvey's 028005-144 Pipe Thread Compound Display
Easy to install, no framing required, works in walls and ceilings up to 3/4" thick, pops in and out of position, no visible clamps or screws. Great for spa pumps, security systems, computer-audio-tv cables. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air, and natural gas. Does not contain lead. Wipes clean from hands. Hang tab tube.
Mueller ProLine Full Port Ball Valve SharkBite 22222-0000LF 1-Piece Full Port In-Line Ball Valve VALVE BALL SHARKBITE BRS 1/2IN
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
Rectorseal 25431 Pipe Thread Sealant Oatey Hub-Fit Gripper Mechanical Cleanout Plug Rectorseal 23431 T-Plus 2 Pipe Thread Sealant
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Threaded O-ring, stainless steel hardware. Plug seals 4-1/2" threaded opening. Made with glass-reinforced ABS plastic and natural rubber O-ring. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Namasco BLACK-3/4 Pipe Oatey 31226 Pipe Joint Compound Protect Plus G30201 Hammock Roll Air Filter
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Not for use on plastic threads. Blue/white rigid fiberglass with light lamination on downstream side. Designed for residential, light industrial and commercial applications.
Patton HAPF30AOPDQ-U4 Odor Eliminator Air Replacement Filter Mueller ProLine Full Port Ball Valve Oatey 42744 Cleanout Plug With Raised Head Countersunk
10x the odor fighting power for eliminating unpleasant household odors such as tobacco, smoke, pet odors, dirty laundry and cooking fumes. Uniquely formulated blend of Carbon, Zeolite and Arm and Hammer baking soda for superior and effective odor eliminating results. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Countersunk and tapped.
Protect Plus G36201 Hammock Roll Air Filter Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft Mueller ProLine Full Port Ball Valve
Blue/white rigid fiberglass with light lamination on downstream side. Designed for residential, light industrial and commercial applications. Cold water use only. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
SharkBite 22185-0000LF 1-Piece Full Port In-Line Ball Valve Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft VALVE BALL SHARKBITE BRS 3/4IN
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). Cold water use only. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
Mueller ProLine Full Port Ball Valve Namasco .375X10B Steel Pipe BALL VALVE SLIP 1/2IN
BALL VALVE SLIP 1/2IN
Our Price: $23.81
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Genova 300 Cold Water Pressure Pipe Namasco BLACK-1 Steel Pipe Imperial GV0752 Round Damper With Duct Key
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Use to adjust and balance airflow in individual runs of round pipe.
DUCT WYE GALV 4 X 4 X 4IN 30GA VALVE BALL 1IN F1960          Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft
Used primarily for heating & air conditioning applications for transition from one round pipe two round pipes. Cold water use only.
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included.
Mueller ProLine Full Port Ball Valve DUCT WYE GALV 5 X 5 X 5IN 30GA Mueller ProLine Full Port Ball Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Used primarily for heating & air conditioning applications for transition from one round pipe two round pipes. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
2X20SCH80 PR.PIPE(GRY) NOBELL Namasco BLK 1/2 Steel Pipe DUCT WYE GALV 6 X 6 X 6IN 30GA
Use for kpressure applications. Cold water only. 400PSI Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Used primarily for heating & air conditioning applications for transition from one round pipe two round pipes.
BALL VALVE SLIP 3/4IN         Patton HAPF60-U3 Carbon Remover Air Replacement Filter VALVE BALL BRASS 1INX1IN
BALL VALVE SLIP 3/4IN
Our Price: $29.68
Powerful carbon filter enhanced with Arm & Hammer backing soda. Cannot be used independently of the main purifier filter. Use with Holmes Purifier: HAP9726B-U. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
Namasco 1.25X10B Steel Pipe Master Flow 12SCF400X Duct Collar Genova 300 Cold Water Pressure Pipe
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. For flexible duct or pipe. For transition from flat surface or internally lined, unlined ductboard plenums to round pipe or insulated flexible duct. Snap together. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
Namasco BLK 3/4 Steel Pipe Mueller ProLine Full Port Ball Valve Patton HAPF600DM Enhanced Mold Fight Air Replacement Filter
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. True HEPA filtration helps Remove 99.97% of Airborne Allergens. Enhanced mold fighting power,  ideal for allergy sufferers. Captures allergens and pollutants such as mold, dust, dust mites, debris, pet dander and smoke.
Mueller ProLine Full Port Ball Valve Namasco 1.5X10B Steel Pipe Mueller ProLine Full Port Ball Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Gentle Rain WSD-GR Air Freshener Dispenser Namasco 2X10B Steel Pipe Frost King F1524 Open Cell Air Filter
Refillable house hold fragrance system. Installs on register grill or vents. Contains: (1) Reusable housing, (1) replaceable scent panel, and (1) mounting hook. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Air Conditioner foam filter.  Removes dust and pollen from the air.  Washable and re-usable.  Can be cut to any size with ordinary scissors
Namasco BLK 1 Steel Pipe Mueller ProLine Full Port Ball Valve Fragrant Living WSDR-BF Berry Fusion Refill Air Freshener
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. For use with Fragrant Living fragrance frames. 3 refills.
Protect Plus WSDR-GR Air Freshener Protect Plus WSDR-SC Air Freshener Mueller ProLine Full Port Ball Valve
For use with Fragrant Living fragrance frames. 3 refills. For use with Fragrant Living fragrance frames. 3 refills. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Arm And Hammer AFHF200 Air Freshener Dispenser Home Fresh AFHFR200 Arm and Hammer Refill Air Freshener Web Filter Fresh WLAVENDER Air Freshener
Attaches to furnace/AC filter, register grill or vent. Optional freshness boosters included. Refillable system. For use with Home Fresh Systems. 3 refill pads, up to 30 days of freshness each. Whole home air freshener. Works with any furnace or air filter. Contains one air freshener.
Web Filter Fresh WCIN Air Freshener