Home > HEATING & COOLING > HEAT & AIR CONDITIONING > THERMOSTATS > THERMOCOUPLES & GENERATORS
Choose a sub category:
CORRUGATED SS TUBING-PROFLEX PIPE CEMENTS BRASS FITTINGS/ACCESSO-PROFLEX
PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS THREAD SEALANT TAPES
GAS LEAK DETECTORS PLUMBERS PUTTY PLUMBING EPOXYS
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape Harvey's 017117B Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Plumb Pak 04151 Pipe Thread Seal Tape Anderson Metal 756110-0402 Brass Pipe Hex Bushing Anderson Metal 757001-0402 Insert Fittings
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757001-0202 Insert Fittings Anderson Metal 757014-04 Insert Fittings Draintech 0440SDB Round Drain Grate
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. ADA compliant. Dual Wall, SDR 35, 2729 S&D
Anderson Metal 756108-02 Brass Pipe Cap Plumb Pak PP20855100 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. For use on plumbing threads to prevent leaking. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Anderson Metal 756110-0604 Brass Pipe Fittings Anderson Metal 757001-0602 Insert Fittings Anderson Metal 756108-04 Brass Pipe Cap
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 757014-06 Insert Fittings Anderson 736113-0224 Pipe Nipple Anderson Metal 757014-05 Insert Fittings
Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 736113-0224, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Harvey's 023015-48 Pipe Joint Compound Anderson Metal 756110-0602 Brass Pipe Hex Bushing Anderson 736112-02 Pipe Nipple
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 736112-02, 1/8 in Nominal, NPT End, Close Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson Metal 757001-0404 Insert Fitting Harvey 030005-144 Pipe Thread Compound Harvey's 017252-144 Pipe Thread Seal Tape
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Anderson Metal 757014-03 Insert Fittings Anderson 736113-0232 Pipe Nipple Anderson Metal 756108-06 Brass Pipe Cap
Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 736113-0232, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 757001-0604 Insert Fittings Anderson 38300-0215 Pipe Nipple NDS 0633SD Corrugated Drain Fittings
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 38300-0215, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines NDS Universal Plug Adapter, 6 in Length
Anderson Metal 738108-04 Brass Pipe Cap Anderson Metal 738108-02 Brass Pipe Cap B and K Industries 888-221RP Bleeder Caps
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Fits most drainable valves. 3 styles of caps with washers included.
Anderson Metal 738108-06 Brass Pipe Cap Draintech 0440SDG Round Drain Grate Anderson 736112-06 Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. ADA compliant. Dual Wall, SDR 35, 2729 S&D Anderson Pipe Nipple, Series: 736112-06, 3/8 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson 736113-0424 Pipe Nipple Anderson 38300-0220 Pipe Nipple Oatey 31229 Great White
Anderson Pipe Nipple, Series: 736113-0424, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0220, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Anderson Metal 738110-0806 Brass Pipe Fittings Anderson 736113-0432 Pipe Nipple Harvey's 044010 Epoxy Putty
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 736113-0432, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Anderson Metal 757001-0804 Insert Fittings Anderson 38300-0415 Pipe Nipple TAPE SEAL PTFE 1X520
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 38300-0415, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Anderson 38300-0225 Pipe Nipple Anderson 38300-0815 Pipe Nipple Anderson Metal 757001-0606 Insert Fitting
Anderson Pipe Nipple, Series: 38300-0225, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0815, 1/2 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson 736113-0240 Pipe Nipple Anderson Metal 756110-0804 Brass Pipe Fitting Anderson 38300-0615 Pipe Nipple
Anderson Pipe Nipple, Series: 736113-0240, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-0615, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Harvey's 017165-144 Pipe Thread Seal Tape Oatey 31403 Gas Line Thread Tape Anderson 38300-0230 Pipe Nipple
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Anderson Pipe Nipple, Series: 38300-0230, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 31402D Water Line Thread Seal Tape Anderson 38300-0420 Pipe Nipple Anderson 736113-0624 Pipe Nipple
Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Anderson Pipe Nipple, Series: 38300-0420, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0624, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Draintech 0642SDB Square Drain Grate Harvey's 017065 Pipe Thread Seal Tape Anderson 38300-0235 Pipe Nipple
Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required. Grates fit directly into Sewer & Drain pipe or fittings, and Corrugated pipe without the use of a coupling. Not for use in areas subject to vehicular traffic. Fits 6" corrugated single wall and dual pipe, SDR 35, 2729 S&D and Triple Wall pipe. 18.9 sq.in. open surface area. 1/4" grate opening. 0-60 PSI. (BLACK) Can also be used with 6" round catch basins. ADA COMPLIANT. Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed. Anderson Pipe Nipple, Series: 38300-0235, 1/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson Metal 738108-08 Brass Pipe Fittings Anderson Metal 756110-0802 Brass Pipe Hex Bushing Anderson 38300-0820 Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-0820, 1/2 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Harvey's 029035 Pipe Thread Compound Anderson Metal 757014-08 Insert Fittings Anderson 38300-0425 Pipe Nipple
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 38300-0425, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson Metal 757001-0806 Insert Fitting Anderson 736113-0440 Pipe Nipple Anderson 736113-0632 Pipe Nipple
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 736113-0440, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0632, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Anderson 736113-0248 Pipe Nipple Anderson 756123-0806 Reducing Pipe Nipple
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Anderson Pipe Nipple, Series: 736113-0248, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines F123 1/2" x 3/8" Reducing Hex Red Brass Nipple
Anderson 38300-0620 Pipe Nipple Anderson Metal 738110-1208 Brass Pipe Fittings Anderson Metal 757014-10 Insert Fittings
Anderson Pipe Nipple, Series: 38300-0620, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 738110-1206 Brass Pipe Hex Bushing Plumb Pak PP854-2 Pipe Joint Compound NDS 1245 Corrugated Drain Fittings
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Fits 3" x  4" corrugated pipe, 3" & 4" S/D pipe and 4" SDR35 pipe. Offset allows for adjusting inlet height. Adapters fit 9 x 9, 12 x 12, 18 x 18, 24 x 24 catch basins, and all low profile series.
KBI SWL-0500-T Stop and Waste Valve Anderson 38300-0240 Pipe Nipple Anderson Metal 757001-1006 Insert Fittings
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. Anderson Pipe Nipple, Series: 38300-0240, 1/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson 756122-08 Hex Pipe Nipple Anderson 38300-1215 Pipe Nipple Anderson 38300-0625 Pipe Nipple
UPC individually bagged. Anderson Pipe Nipple, Series: 38300-1215, 3/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0625, 3/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0430 Pipe Nipple Anderson 38300-0825 Pipe Nipple KBI SWL-0750-T Stop and Waste Valve
Anderson Pipe Nipple, Series: 38300-0430, 1/4 in Nominal, MNPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0825, 1/2 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards.
Rectorseal 25790 Pipe Thread Sealant Anderson 38300-0435 Pipe Nipple Harvey's 044150-12 Epoxy Putty
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Anderson Pipe Nipple, Series: 38300-0435, 1/4 in Nominal, MNPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Hardens like steel in 20 minutes. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. Note: You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Anderson 736113-0448 Pipe Nipple Anderson Metal 738110-1204 Brass Pipe Fitting Anderson Metal 738110-0804 Brass Pipe Fitting
Anderson Pipe Nipple, Series: 736113-0448, 1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738108-12 Brass Pipe Fitting Anderson 38300-0250 Pipe Nipple Anderson 38300-1220 Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-0250, 1/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1220, 3/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 736112-12 Pipe Nipple Oatey 31230 Great White Anderson 38300-0630 Pipe Nipple
Anderson Pipe Nipple, Series: 736112-12, 3/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Pipe Nipple, Series: 38300-0630, 3/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0830 Pipe Nipple NDS 0660SDB Round Grate Brass Craft PS1087 Seal 'N Check Kit
Anderson Pipe Nipple, Series: 38300-0830, 1/2 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Use with 6" round basin, 6" corrugated singlewall pipe, or 6" PVC pipe. ADA compliant. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
Anderson 38300-0440 Pipe Nipple Anderson 38300-0635 Pipe Nipple Anderson 38300-0260 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0440, 1/4 in Nominal, NPT End, 4 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0635, 3/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0260, 1/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson Metal 757001-0808 Insert Fittings Anderson 38300-1225 Pipe Nipple Plumb Pak PP854-1 Pipe Thread Sealant
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 38300-1225, 3/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing
Anderson 38300-16 Pipe Nipple Anderson 38300-0835 Pipe Nipple Harvey's 023030 Pipe Joint Compound
Anderson Pipe Nipple, Series: 38300-16, 1 in Nominal, NPT End, CLOSE in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0835, 1/2 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Harvey's 025020 Pipe Thread Compound Anderson Metal 738105-0604 Brass Pipe Fitting Anderson Metal 738105-0602 Brass Pipe Fitting
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Anderson Reducing Elbow, 3/8 x 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications Anderson Reducing Elbow, 3/8 x 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Draintech 0443SDB Atrium Drain Grate Anderson Metal 757001-1208 Insert Fittings Anderson 38300-0445 Pipe Nipple
Use with pipe and connecting fittings where a drain basin is not needed, or where space doesn't allow the use of a basin. Use with corrugated singlewall pipe, triplewall pipe, leach pipe, or PVC pipe. Dual Wall, SDR 35, 2729 S&D Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 38300-0445, 1/4 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty Anderson Metal 757001-1212 Insert Fitting Anderson Metal 738110-1612 Brass Pipe Fittings
NSF rating, signifying it safe for contact with potable water. Works wet or dry. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-1608 Brass Pipe Hex Bushing Anderson Metal 757001-0608 Insert Fitting Anderson 756122-12 Hex Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. UPC individually bagged.
Oatey Fix-It Epoxy Putty Anderson Metal 757001-1008 Insert Fitting Anderson Metal 738105-0806 Brass Pipe Fitting
For sealing, patching and mending compound. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Perfect for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Reducing Elbow, 1/2 x 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Genova 500 Line Valve Anderson 38300-0640 Pipe Nipple Anderson 38300-0450 Pipe Nipple
High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2" and 3/4" CPVC tubing (Requires couplings for attaching to 3/4" tubing). Bulk. Anderson Pipe Nipple, Series: 38300-0640, 3/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0450, 1/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-1230 Pipe Nipple Anderson 38300-0840 Pipe Nipple Anderson 38300-1620 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-1230, 3/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0840, 1/2 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1620, 1 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0845 Pipe Nipple Anderson 38300-1235 Pipe Nipple Rectorseal 31631 Tru-Blu
Anderson Pipe Nipple, Series: 38300-0845, 1/2 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1235, 3/4 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732.
Rectorseal 23631 T-Plus 2 Harvey's 029048 Pipe Thread Compound Anderson 38300-0650 Pipe Nipple
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Anderson Pipe Nipple, Series: 38300-0650, 3/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 15420 Pro Dope Anderson Metal 738105-1208 Brass Pipe Fitting Anderson Metal 738108-16 Brass Pipe Cap
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Anderson Reducing Elbow, 3/4 x 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
B&K Proline Stop and Waste Valve Rectorseal 25631 Pipe Thread Sealant Anderson 38300-0460 Pipe Nipple
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Anderson Pipe Nipple, Series: 38300-0460, 1/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 15804 Hercules Pipe Thread Sealant Anderson 38300-0850 Pipe Nipple NDS 1243 Storm Drain Fittings
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Anderson Pipe Nipple, Series: 38300-0850, 1/2 in Nominal, NPT End, 5 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Use to attach 3" or 4" pipe to any size NDS drain basin where a straight-line connection is needed. Works as a locking fitting to 3" or 4" Corrugated Pipe; as a snuggle fitting to 3" or 4" PVC or leach pipe. Manufactured using rigid, lightweight polyolefins.
Fernco FSDP-EO Storm Drain Fitting Fernco FSDP-EC Storm Drain Fitting NDS 0663SDG Round Atrium Grate With UV Inhibitor
Fernco FSDP-EC End Cap
Our Price: $8.44
End outlet slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels. End outlet accommodates 3" & 4" sewer and drain pipe or 3" & 4" Sch. 40 fitting hub. The StormDrain Plus end cap slides into the female end of the channels. It also has tabs to fit into the male end of the channels or the cut-to-length end of the channels. Made of highest quality structural foam polyethylene with UV inhibitor. For use in all areas of vegetation and trees. Use in non-traffic areas where lawn mowers are excluded. 6" fits 6" S/ D pipe fittings, 6" bell end, 6" corrugated and 6" catch basins. Open surface area 23.91 sq.in. 5/16" grate opening. D, SDR 35, 2729 S&D Triple wall.
Anderson Metal 757001-0302 Insert Fittings Anderson 38300-1625 Pipe Nipple Anderson 38300-1240 Pipe Nipple
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Nipple, Series: 38300-1625, 1 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1240, 3/4 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Camco 9293 Thermocouple Camco 9273 Thermocouple Anderson 38300-0855 Pipe Nipple
With positioning adapters, fit RV gas water heaters and furnaces. With positioning adapters, fit RV gas water heaters and furnaces. Anderson Pipe Nipple, Series: 38300-0855, 1/2 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0660 Pipe Nipple Anderson 38300-1250 Pipe Nipple Harvey's 023045 Pipe Joint Compound
Anderson Pipe Nipple, Series: 38300-0660, 3/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1250, 3/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Anderson 38300-1245 Pipe Nipple Harvey's 025050 Pipe Thread Compound Honeywell CQ100A Thermocouple
Anderson Pipe Nipple, Series: 38300-1245, 3/4 in Nominal, NPT End, 4-1/2 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
Anderson 38300-1630 Pipe Nipple Anderson 38300-1260 Pipe Nipple B&K Proline Stop and Waste Valve
Anderson Pipe Nipple, Series: 38300-1630, 1 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1260, 3/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.
Anderson 38300-0860 Pipe Nipple Anderson Metal 738110-2016 Brass Pipe Fitting B&K Proline Stop and Waste Valve
Anderson Pipe Nipple, Series: 38300-0860, 1/2 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Anderson 38300-1255 Pipe Nipple Honeywell CQ100A Thermocouple Oatey 34055 Plumbing Access Panel
Anderson Pipe Nipple, Series: 38300-1255, 3/4 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled.
Anderson 38300-2020 Pipe Nipple NDS 1241 Draintech Corrugated Drain Fittings Anderson Metal 757001-0304 Insert Fittings
Anderson Pipe Nipple, Series: 38300-2020, 1-1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Fits 3" and 4" corrugated pipe; S&D pipe and 4" SDS35 pipe. Fits 9", 12" and 18" catch basins. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Oatey 15427 Pro Dope B&K Proline Stop and Waste Valve Oatey 34045 Plumbing Access Panel
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled.
NDS 101 Single Outlet Round Catch Basin NDS 201 Double Outlet Round Catch Basin Plumb Pak PP855-1 Pipe Thread Seal Tape
Designed to act as sump areas to collect debris and help keep pipe lines unclogged. Single and double outlets will fit 3" & 4" S/D pipe, 3" & 4" corrugated, SDR 35 and 4" DWV pipe. Universal outlet adapter included. Designed to act as sump areas to collect debris and help keep pipe lines unclogged. Single and double outlets will fit 3" & 4" S/D pipe, 3" & 4" corrugated, SDR 35 and 4" DWV pipe. Universal outlet adapter included. For use on plumbing threads to prevent leaking.
Anderson 38300-1635 Pipe Nipple B&K Proline Stop and Waste Valve Oatey 15806 Hercules Pipe Thread Sealant
Anderson Pipe Nipple, Series: 38300-1635, 1 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732.
Rectorseal 25551 Pipe Thread Sealant B&K Proline 7700 Full Port Solder Ball Valve Rectorseal 23551 T-Plus 2 Pipe Thread Sealant
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Marshall 6EPS Trench Drain End Plate Anderson 38300-1640 Pipe Nipple Anderson 38300-2030 Pipe Nipple
Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole. Anderson Pipe Nipple, Series: 38300-1640, 1 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-2030, 1-1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
B&K Proline Stop and Waste Valve Marshall 6EPSWH Trench Drain End Plate Fluidmaster AP0808 Access Panels
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Pieces sold individually. Refer to the following item numbers: 131-9110 6 x 12 inch Steel Bottom with Grate, 192-6930 6 x 48 inch Steel Bottom with Grate, 017-7618 6-3/4 x 7 inch Steel End Plate and 130-0508 6-3/4 x 7 inch Steel End Plate with hole. Easy to install, no framing required, works in walls and ceilings up to 3/4" thick, pops in and out of position, no visible clamps or screws. Great for spa pumps, security systems, computer-audio-tv cables.
STOP VALVE W/DRAIN 1/2IN      Honeywell CQ100A Thermocouple B&K Proline 7700 Full Port Ball Valve
STOP VALVE W/DRAIN 1/2IN
Our Price: $13.20
Push-to-connect stop valve with drain. Brass. Connects to copper, PEX, CPVC or PE-RT pipe. Lead free DZR brass construction. Designed for potable water distribution. Meets all UPC, IPC, and cUPC requirements. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson Metal 757001-0504 Insert Fittings Oatey 34056 Plumbing Access Panel Honeywell CQ100A Thermocouple
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
Plumb Pak PP855-100 Pipe Thread Seal Tape NDS 0902SDB Square Grate With UV Inhibitor STOP VALVE W/DRAIN 3/4IN
STOP VALVE W/DRAIN 3/4IN
Our Price: $14.45
For use on plumbing threads to prevent leaking. Made of highest quality structural foam polyethylene with UV inhibitor. May be used in turf or concrete applications such as lawn areas, walkways, patios and pool areas where effective surface water removal systems are required.. Fits 9 x 9 catch basin and 9 x 9 low profile. 27.29 sq.in. open surface area. 5/16" grate opening. 61-175 PSI. ADA compliant. Push-to-connect stop valve with drain. Brass. Connects to copper, PEX, CPVC or PE-RT pipe. Lead free DZR brass construction. Designed for potable water distribution. Meets all UPC, IPC, and cUPC requirements.
Anderson 736112-04 Pipe Nipple Namasco BLACK-1/2 Pipe Anderson Metal 736140-0604 Brass Pipe Fitting
Anderson Pipe Nipple, Series: 736112-04, 1/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
NDS 422G Pop-Up Drain Emitter With Elbow and UV Inhibitor Anderson Metal 738110-0602 Brass Pipe Hex Bushing Anderson Metal 738110-0402 Brass Pipe Hex Bushing
Allows water to be diverted and released to water-safe areas away from structures, erosion-prone landscapes and poor drainage areas. Opened by the hydrostatic pressure of water flowing through the drain pipe, the emitter closes as flow diminishes preventing debris and rodents from entering drain system. 4" polyolefin pop-up emitter, center drive pop-up with UV inhibitor, PVC 90 degree elbow with 1/4" drain hole. 40GPM. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0604 Brass Pipe Fitting NDS 0903SDG Atrium Grate With UV Inhibitor Anderson Metal 757002-0606 Insert Fittings
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure application