Home > HEATING & COOLING > HEAT & AIR CONDITIONING > THERMOSTATS > THERMOSTATS - SMART/ BLUETOOTH
Sort By:
1
Anderson Metal 756109-02 Brass Pipe Plug Cored Square Head Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Anderson Metal 756109-04 Brass Pipe Plug Cored Square Head
Anderson Pipe Plug, Cored, Square Head, 1/8 in Nominal Size, MPT, Brass All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. Anderson Pipe Plug, Cored, Square Head, 1/4 in Nominal Size, MPT, Brass
Anderson Metal 756109-06 Brass Pipe Plug Cored Square Head Pro-Flex PFSP-0302 Pro-Flex Striker Plate Pro-Flex Floppy-Flex Protective Conduit
Anderson Pipe Plug, Square Head, 3/8 in Nominal Size, MPT, Brass Protective devices required where tubing passes through structural members. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Oatey 42783 Cover Plates Anderson 756100-02 Pipe Elbow Oatey 30779 All Purpose Pipe Cleaner
6" stainless steel cover plate conceals the clean-out plug access hole. Screw included. Anderson Pipe Elbow, Series: 756100-02, 1/8 in Nominal, FIP End, 90 deg, 1000 psi Working, Brass, Yellow, 250 deg F, Federal Public Law 111-380 For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface.
Anderson 738100-04 Pipe Elbow Anderson 738100-06 Pipe Elbow Anderson 738100-02 Pipe Elbow
Anderson Pipe Elbow, Series: 738100-04, 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738100-06, 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738100-02, 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson Metal 738109-08 Brass Pipe Fittings Oatey 30755 PVC/CPVC Primer B&K Proline Solvent Stop Valve
Anderson Pipe Plug, Cored, 1/2 in Nominal Size, IPT, Brass A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
Rectorseal 55910 PVC/CPVC Primer/Cleaner B&K Proline Solvent Stop Valve Harvey's 019050-24 PVC/CPVC Purple Primer
Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can.
Oatey 30780 PVC/CPVC Primer/Cleaner Pro-Flex PFSP-0307 Pro-Flex Striker Plate Anderson Metal 738109-12 Brass Pipe Fitting
Purple-tinted all purpose primer/cleaner for PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime as well as softens pipe in preparation for solvent cement. Purple tint for verification for code. Apply at temperatures 40 degrees Fahrenheit to 100 degrees Fahrenheit. Protective devices required where tubing passes through structural members. Anderson Pipe Plug, Cored, 3/4 in Nominal Size, IPT, Brass
Brass Craft CSSTNN-10N Gas Appliance Connector Oatey 185 Cleanout Plug With Raised Head Pro-Flex Floppy-Flex Protective Conduit
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Brass cleanout plug with raised square head for use with slip joint pliers. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Oatey 30750 Pipe Primer/Cleaner Harvey 019100-24 All Purpose Pipe Cleaner Genova 500 Straight Supply Line Valve
Recommended for use with PVC and CPVC pipe and fittings. Formulated to remove dirt and oil from the surface of the piping, as well as soften the piping in preparation for solvent welding. NSF Standard 61 listed for PW, DWV, and sewer. Meets ASTM standard F 656. All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk.
Anderson 38310-06 Pipe Nipple Harvey 019110-24 All Purpose Pipe Cleaner Oatey 185 Cleanout Plug With Raised Head
Anderson Pipe Nipple, Series: 38310-06, 3/8 in Nominal, MPT End, Close Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. Brass cleanout plug with raised square head for use with slip joint pliers.
Anderson 738100-08 Pipe Elbow Rectorseal 55912 PVC/CPVC Primer/Cleaner Genova 500 Supply Line Valve
Anderson Pipe Elbow, Series: 738100-08, 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk.
Oatey 30756 PVC/CPVC Primer Anderson Metal 738109-16 Brass Pipe Plug Cored Brass Craft CSSTNN-16N Gas Appliance Connectors
A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. Anderson Pipe Plug, Cored, 1 in Nominal Size, IPT, Brass Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Oatey 185 Cleanout Plug With Raised Head Harvey's 019060-24 PVC/CPVC Purple Primer Harvey 19520 All Purpose Pipe Cleaner
Brass cleanout plug with raised square head for use with slip joint pliers. Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. Convenient project pack contains 4 oz. all-purpose pipe cleaner, and 4 oz. multi-purpose solvent cement. For most ABS, PVC, or CPVC projects. Twin pack.
Oatey 30783 PVC/CPVC Primer/Cleaner Harvey 019120-12 All Purpose Pipe Cleaner B&K Proline Stop Valve
Purple-tinted all purpose primer/cleaner for PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime as well as softens pipe in preparation for solvent cement. Purple tint for verification for code. Apply at temperatures 40 degrees Fahrenheit to 100 degrees Fahrenheit. All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
Brass Craft CSSTNN-22N Gas Appliance Connectors Brass Craft CSSTNN-28N Gas Appliance Connectors Anderson 38310-0620 Pipe Nipple
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Anderson Pipe Nipple, Series: 38310-0620, 3/8 in Nominal, MPT End, 2 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines
Harvey's 019550 Primer/Cement Pack PEX VALVE STRAIGHT STOP 1/2IN Rectorseal 55914 PVC/CPVC Primer/Cleaner
Convenient project pack contains 4 oz. purple primer, and 4 oz. blue PVC wet set cement. For most wet condition projects. Twin pack. Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can.
Anderson 738100-12 Pipe Elbow PlumbPak PP33-10PCLF Pipe Nipple Harvey's 019530 Primer/Cement Pack
Anderson Pipe Elbow, Series: 738100-12, 3/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Carded. Convenient project pack contains 4 oz. purple primer and 4 oz. PVC solvent cement. For most PVC pipe projects. Twin pack.
Oatey 30246 Primer/Cement Pack Anderson 738124-08 Street Pipe Elbow Oatey 30782 All Purpose Pipe Cleaner
Contains one can of  regular clear PVC cement, and one can of NSF purple primer. Ideal size for most pipe installations. Anderson Street Pipe Elbow, Series: 738124-08, 1/2 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface.
PRIMER CPVC/PURPLE HANDY 4OZ  Watts PL-3012 Push-Fit Quick Connect Straight Stop Valve B&K Proline Stop Valve
Contains 1 can of CPVC Cement and 1 can of NSF Purple Primer. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
Watts P-450 Quick Connect Straight Stop Valve PlumbPak PP33-40PCLF Pipe Nipple Pro-Flex PFAP-1210 Pro-Flex Accessory Pack
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Carded. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components.
Watts P-650 Quick Connect Straight Stop Valve Watts PL-3042 Push-Fit Quick Connect Straight Stop Valve B&K Proline Stop Valve
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. 125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G.
Anderson 738124-12 Street Pipe Elbow Watts PL-3041 Push-Fit Quick Connect Straight Stop Valve Anderson Metal 738114-16 Brass Pipe Plug
Anderson Street Pipe Elbow, Series: 738124-12, 3/4 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Anderson Pipe Plug, Solid, 1 in Nominal Size, IPT, Red Brass
Watts PL-3011 Push-Fit Quick Connect Straight Stop Valve Anderson 38310-0825 Pipe Nipple Flair-It 16879 Straight Stop Valve
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Anderson Pipe Nipple, Series: 38310-0825, 1/2 in Nominal, MPT End, 2-1/2 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
PEX VALVE MANIFOLD 1/2IN      PEX VALVE MANIFOLD RED 1/2IN  PEX VALVE MANIFOLD BLK 1/2IN
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
Oatey 185 Cleanout Plug With Raised Head Anderson 38310-0630 Pipe Nipple Anderson Metal 738109-24 Brass Pipe Fitting
Brass cleanout plug with raised square head for use with slip joint pliers. Anderson Pipe Nipple, Series: 38310-0630, 3/8 in Nominal, MPT End, 3 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Plug, Cored, 1-1/2 in Nominal Size, IPT, Brass
Brass Craft CSSTNN-34N Gas Appliance Connectors BrassCraftCSSLNN-10NGasApplianceConnectors Pro-Flex PFBC-AB Pro-Flex Bonding Clamps
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
B&K Proline Stop Valve Brass Craft CSSL54-12 Gas Appliance Connectors Brass Craft CSSD54-12 Gas Appliance Connectors
125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Flair-It 16880 Straight Stop Valve Brass Craft CSSLNN-16N Gas Appliance Connector
Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. For hot or cold water In-line valve with PEX connections on both ends. Bar coded. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Harvey's 019070-12 PVC/CPVC Purple Primer BrassCraftCSSCNN-22NGasApplianceConnectors Oatey 185 Cleanout Plug With Raised Head
Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Brass cleanout plug with raised square head for use with slip joint pliers.
Oatey 1023 Drum Trap Covers BrassCraftCSSLNN-22NGasApplianceConnectors BrassCraftCSSLNN-28NGasApplianceConnectors
3-1/4"-4" adjustable drum trap cover with 5-1/4" stainless steel cover and rubber gasket. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
B&K Proline 1/4 Turn Straight Stop Valve Pro-Flex PFMF-1212 Tube To Pipe Adapter Brass Craft CSSLNN-34N Gas Appliance Connector
ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Anderson Metal 738104-04 Brass Pipe Union Anderson Metal 738104-06 Brass Pipe Union Anderson Metal 738104-02 Brass Pipe Fitting
Anderson Pipe Union, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Union, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Union, 1/8 in Nominal Size, FPT, Brass
B and K Industries G014SS101118RP Gas Connectors Harvey 019130-12 All Purpose Pipe Cleaner Anderson 738100-16 Pipe Elbow
CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature. All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. Anderson Pipe Elbow, Series: 738100-16, 1 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
PEX VALVE ANGLE 1/2IN         Oatey 30757 PVC/CPVC Primer Watts P-866 Quick Connect Straight Stop Valve
PEX VALVE ANGLE 1/2IN
Our Price: $12.02
Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged
Brass Craft CSSTNN-46N Gas Appliance Connectors PEX VALVE 3W 1/2X1/2X1/2IN    PEX VALVE BYPASS 1/2IN
PEX VALVE BYPASS 1/2IN
Our Price: $12.77
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Use to bypass flow to water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
PEX VALVE CENTER DRN 3WY 1/2IN PEX BYPASS 1/2X1/2MPTX1/2IN   Anderson Metal 738104-08 Brass Pipe Union
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Anderson Pipe Union, 1/2 in Nominal Size, FPT, Brass
Pro-Flex PFFN-1212 Tube To Pipe Adapter Oatey 30795 All Purpose Pipe Cleaner Brass Craft CSSL54-18 Gas Appliance Connectors
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSNN-28N Gas Appliance Connector Oatey 185 Cleanout Plug With Raised Head Brass Craft CSSC21-24 Gas Appliance Connectors
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Brass cleanout plug with raised square head for use with slip joint pliers. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSL54-36 Gas Appliance Connectors Brass Craft CSSL54-24 Gas Appliance Connectors Brass Craft CSSCNN-16N Gas Appliance Connector
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
BrassCraftCSSCNN-34NGasApplianceConnectors Brass Craft CSSD54-18 Gas Appliance Connectors Anderson Metal 756121-02 Brass Pipe Fitting
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Brass Craft CSSD54-24 Gas Appliance Connectors Brass Craft CSSC21-18 Gas Appliance Connectors B&K Proline 1/4 Turn Straight Stop Valve
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant.
Anderson Metal 738114-20 Brass Pipe Fitting Brass Craft CSSD54-24P Procoat Brass Craft CSSD54-30 Gas Appliance Connectors
Anderson Pipe Plug, Solid, 1-1/4 in Nominal Size, IPT, Red Brass Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSL54-30 Gas Appliance Connectors Pro-Flex PFMF-3406 Tube To Pipe Adapter Anderson 738100-20 Pipe Elbow
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Anderson Pipe Elbow, Series: 738100-20, 1-1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson Metal 738104-12 Brass Pipe Fittings Brass Craft CSSTNN-58N Gas Appliance Connectors Brass Craft CSSL54-36P Procoat Gas Dryer Connectors
Anderson Pipe Union, 3/4 in Nominal Size, FPT, Brass Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings.
CLEANER CLEAR 32 OUNCE        Brass Craft CSSC21-30 Gas Appliance Connector PEX VALVE STRAIGHT STOP 3/4IN
For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
Brass Craft CSSC21-36 Gas Appliance Connectors Brass Craft CSSD54-36 Gas Appliance Connectors Brass Craft CSSLNN-46N Gas Appliance Connector
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-24P Procoat Gas Dryer Connectors Brass Craft CSSCNN-46N Gas Appliance Connectors Pro-Flex PFFN-3406 Tube To Pipe Adapter
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Anderson Metal 738114-04 Brass Pipe Plug Anderson Metal 738114-02 Brass Pipe Plug Anderson Metal 738114-06 Brass Pipe Plug
Anderson Pipe Plug, Solid, 1/4 in Nominal Size, IPT, Red Brass Anderson Pipe Plug, Solid, 1/8 in Nominal Size, IPT, Red Brass Anderson Pipe Plug, Solid, 3/8 in Nominal Size, IPT, Red Brass
Brass Craft CSSL54-48 Gas Appliance Connector Namasco GALV-1/2 Steel Pipe Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
Anderson Metal 756121-08 Brass Pipe Plug Cored Hex Head Harvey's 019080-12 PVC/CPVC Purple Primer Brass Craft CSSD54-48 Gas Appliance Connectors
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSC21-48 Gas Appliance Connectors Anderson Metal 756121-04 Brass Pipe Plug Cored Hex Head Anderson 738100-24 Pipe Elbow
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Pipe Elbow, Series: 738100-24, 1-1/2 in Nominal, IPT End, 90 deg, Brass, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
PRIMER PURPLE 32 OUNCE        Brass Craft CSSD54-48P Procoat Brass Craft CSSL54-48P Procoat
A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings.
Brass Craft CSSD54-36P Procoat Brass Craft CSSLNN-58N Gas Appliance Connectors Oatey Hub-Fit Gripper Mechanical Cleanout Plug
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Threaded O-ring, stainless steel hardware. Plug seals 4-1/2" threaded opening. Made with glass-reinforced ABS plastic and natural rubber O-ring.
Brass Craft CSSD54-60 Gas Appliance Connectors Brass Craft CSSC21-36P Procoat Gas Range Connectors Protect Plus 114301 Air Filter
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 114141 Air Filter Protect Plus 120201 Air Filter Protect Plus 114201 Air Filter
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 112241 Air Filter Protect Plus 112201 Air Filter Protect Plus 114241 Air Filter
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 112121 Air Filter Protect Plus 116251 Air Filter Protect Plus 116201 Air Filter
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 115201 Air Filter Protect Plus 114251 Air Filter Protect Plus 110201 Air Filter
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 116241 Air Filter Protect Plus 112301 Air Filter Protect Plus 115251 Air Filter
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 116161 Air Filter Brass Craft CSSC21-48P Procoat Gas Range Connectors BrassCraftCSSCNN-58NGasApplianceConnectors
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-60 Gas Appliance Connectors BrassCraftCSSL44E-24PGasApplianceConnectors Anderson Metal 738104-16 Brass Pipe Union
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Anderson Pipe Union, 1 in Nominal Size, FPT, Brass
Oatey 42744 Cleanout Plug With Raised Head Countersunk Brass Craft CSSC54-36P Procoat Gas Range Connectors Brass Craft CSSC21-60 Gas Appliance Connectors
Countersunk and tapped. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
BrassCraftCSSL44E-36PGasApplianceConnectors Protect Plus 118301 Air Filter Protect Plus 118181 Air Filter
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus 118201 Air Filter Delta P 121A21A1A12 Air Filter Protect Plus 118251 Air Filter
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2.
Protect Plus FS1200022251 Air Filter Protect Plus 118241 Air Filter FILTER HVAC PLEATED 14X30X1IN
Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. Panel filter utilizing the Purolator Monobond concept of a one-piece frame sealed to the media using heat and pressure. Fiberglass media is evenly coated with a gel adhesive to prevent finer particle migration. Full depth loading and high dust holding capacity. Filter media has a skin backing and is evenly coated with a jelled adhesive. UL Class 2. 90 day filter, 23 times more effective than fiberglass filters. Filters airborne allergens including dust, dirt and pollen.  Helps reduce dust and dirt buildup in furnace systems and air ducts. Cardboard frame material, made in the USA.
BrassCraftCSSD44E-18PGasApplianceConnectors Brass Craft CSSC54-48P Procoat Namasco GALV-3/4 Steel Pipe
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced ait heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" I.D. (5/8" O.D.) tube with fittings. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
FILTER AC BASIC 16X25IN       FILTER AC BASIC 14X20IN       FILTER AC BASIC 20X30IN
Captures household dust and other large airborne particles. Lasts up to 90 days/3 months. Captures household dust and other large airborne particles. Lasts up to 90 days/3 months. Captures household dust and other large airborne particles. Lasts up to 90 days/3 months.
FILTER AC BASIC 16X20IN       FILTER AC BASIC 20X20IN       FILTER AC BASIC 14X25IN
Captures household dust and other large airborne particles. Lasts up to 90 days/3 months. Captures household dust and other large airborne particles. Lasts up to 90 days/3 months. Captures household dust and other large airborne particles. Lasts up to 90 days/3 months.
FILTER AC BASIC 20X25IN       Pro-Flex PFST-12 Pro-Flex Termination Plates BrassCraftCSSD44E-24PGasApplianceConnectors
Captures household dust and other large airborne particles. Lasts up to 90 days/3 months. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion