Home > HEATING & COOLING > HEAT & AIR CONDITIONING > THERMOSTATS
Choose a sub category:
PIPE CEMENTS PIPE CEMENTS STANDARD THERMOSTATS
PIPE CLEANERS & PRIMERS PIPE CLEANERS & PRIMERS PROGRAMMABLE THERMOSTATS
THERMOSTATS - SMART/ BLUETOOTH THREAD SEALANT COMPOUNDS THREAD SEALANT COMPOUNDS
THERMOCOUPLES & GENERATORS THREAD SEALANT TAPES THREAD SEALANT TAPES
GAS LEAK DETECTORS GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBERS PUTTY PLUMBING EPOXYS PLUMBING EPOXYS
Sort By:
1
Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Anderson Metal 756108-02 Brass Pipe Cap Harvey's 043010 Plumbers Putty
All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands.
Anderson Metal 756108-04 Brass Pipe Cap Anderson 736113-0224 Pipe Nipple Anderson 756116-02 Street Pipe Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 736113-0224, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Harvey's 023015-48 Pipe Joint Compound Anderson 736112-02 Pipe Nipple Harvey 030005-144 Pipe Thread Compound
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Anderson Pipe Nipple, Series: 736112-02, 1/8 in Nominal, NPT End, Close Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS.
Oatey 31166 Plumbers Putty Pro-Flex PFSP-0302 Pro-Flex Striker Plate Anderson 736113-0232 Pipe Nipple
Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Protective devices required where tubing passes through structural members. Anderson Pipe Nipple, Series: 736113-0232, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson Metal 756108-06 Brass Pipe Cap Anderson 38300-0215 Pipe Nipple Anderson Metal 738108-04 Brass Pipe Cap
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-0215, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738108-02 Brass Pipe Cap Anderson Metal 738108-06 Brass Pipe Cap Sta Put 25101 Non-Mastic Plumbers Putty
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Molds easily, and will not harden, crumble, crack or shrink. A flexible, stretchable compound for professional use in setting bowls, fixtures, faucets, basin cocks, strainers, plugs, sink frames and all other sealing and caulking applications. Provides a watertight seal. Will not stick to hands. Excellent low temperature properties. Meets Fed. Spec. A-A-3110 (formerly TT-P-1536A). Not for use on porous surfaces.
Anderson 736112-06 Pipe Nipple Anderson 736113-0424 Pipe Nipple Anderson 38300-0220 Pipe Nipple
Anderson Pipe Nipple, Series: 736112-06, 3/8 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0424, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0220, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 31229 Great White Anderson 736113-0432 Pipe Nipple Anderson 38300-0415 Pipe Nipple
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Pipe Nipple, Series: 736113-0432, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0415, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Pro-Flex Floppy-Flex Protective Conduit Anderson 38300-0225 Pipe Nipple Anderson 38300-0815 Pipe Nipple
12" long floppy-flex galvanized protective conduits for CSST tubing. Anderson Pipe Nipple, Series: 38300-0225, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0815, 1/2 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 736113-0240 Pipe Nipple Anderson 38300-0615 Pipe Nipple Anderson 756116-04 Street Pipe Elbow
Anderson Pipe Nipple, Series: 736113-0240, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0615, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 38300-0230 Pipe Nipple Oatey 42783 Cover Plates Anderson 38300-0420 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0230, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines 6" stainless steel cover plate conceals the clean-out plug access hole. Screw included. Anderson Pipe Nipple, Series: 38300-0420, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 736113-0624 Pipe Nipple Anderson 38300-0235 Pipe Nipple Anderson Metal 738108-08 Brass Pipe Fittings
Anderson Pipe Nipple, Series: 736113-0624, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0235, 1/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 38300-0820 Pipe Nipple Harvey's 029035 Pipe Thread Compound Anderson 38300-0425 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0820, 1/2 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Anderson Pipe Nipple, Series: 38300-0425, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 736113-0440 Pipe Nipple Anderson 736113-0632 Pipe Nipple Rectorseal 23710 T-Plus 2 Pipe Thread Sealant
Anderson Pipe Nipple, Series: 736113-0440, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0632, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Anderson Metal 738119-0604 Brass Pipe Fitting KBI DF-0750-T Chemical Resistant Drum Faucet Anderson Metal 738119-0602 Brass Pipe Reducing Coupling
AMC Pipe Reducing Coupling, 3/8 x 1/4 in Nominal Size, IPT, Brass 3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. AMC Pipe Reducing Coupling, 3/8 x 1/8 in Nominal Size, IPT, Brass
Anderson 736113-0248 Pipe Nipple Anderson 756123-0806 Reducing Pipe Nipple Anderson 38300-0620 Pipe Nipple
Anderson Pipe Nipple, Series: 736113-0248, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines F123 1/2" x 3/8" Reducing Hex Red Brass Nipple Anderson Pipe Nipple, Series: 38300-0620, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Plumb Pak PP854-2 Pipe Joint Compound Anderson 38300-0240 Pipe Nipple Anderson 756122-08 Hex Pipe Nipple
Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Anderson Pipe Nipple, Series: 38300-0240, 1/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines UPC individually bagged.
Anderson 38300-1215 Pipe Nipple BREAKER VACUUM BRASS 3/4INCH  Anderson 38300-0625 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-1215, 3/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building Anderson Pipe Nipple, Series: 38300-0625, 3/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Imperial GV0748 Round Damper With Duct Key Anderson 38300-0430 Pipe Nipple Anderson 38300-0825 Pipe Nipple
Use to adjust and balance airflow in individual runs of round pipe. Anderson Pipe Nipple, Series: 38300-0430, 1/4 in Nominal, MNPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0825, 1/2 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Pro-Flex PFSP-0307 Pro-Flex Striker Plate Rectorseal 25790 Pipe Thread Sealant Oatey 185 Cleanout Plug With Raised Head
Protective devices required where tubing passes through structural members. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Brass cleanout plug with raised square head for use with slip joint pliers.
Oatey 31177 Stain-Free Plumbers Putty Pro-Flex Floppy-Flex Protective Conduit Anderson 38300-0435 Pipe Nipple
Perfect for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. 12" long floppy-flex galvanized protective conduits for CSST tubing. Anderson Pipe Nipple, Series: 38300-0435, 1/4 in Nominal, MNPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
B&K 108-904RP Backflow Preventer Vacuum Breaker Anderson 736113-0448 Pipe Nipple Anderson Metal 738108-12 Brass Pipe Fitting
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. Anderson Pipe Nipple, Series: 736113-0448, 1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 38300-0250 Pipe Nipple Anderson 38300-1220 Pipe Nipple Anderson 736112-12 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0250, 1/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1220, 3/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736112-12, 3/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson Metal 738119-0806 Brass Pipe Fitting Oatey 31230 Great White Anderson 38300-0630 Pipe Nipple
AMC Pipe Reducing Coupling, 1/2 x 3/8 in Nominal Size, IPT, Brass Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Pipe Nipple, Series: 38300-0630, 3/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0830 Pipe Nipple Imperial GV0957-B Side Take-Off Harvey's 043050 Plumbers Putty
Anderson Pipe Nipple, Series: 38300-0830, 1/2 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands.
Brass Craft PS1087 Seal 'N Check Kit Anderson 38300-0440 Pipe Nipple Oatey 185 Cleanout Plug With Raised Head
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Anderson Pipe Nipple, Series: 38300-0440, 1/4 in Nominal, NPT End, 4 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Brass cleanout plug with raised square head for use with slip joint pliers.
Anderson 38300-0635 Pipe Nipple Anderson 738116-04 Street Pipe Elbow Anderson 738116-02 Street Pipe Elbow
Anderson Pipe Nipple, Series: 38300-0635, 3/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 738116-06 Street Pipe Elbow Anderson 38300-0260 Pipe Nipple Anderson 38300-1225 Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-0260, 1/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1225, 3/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Plumb Pak PP854-1 Pipe Thread Sealant Anderson 38300-16 Pipe Nipple Anderson 38300-0835 Pipe Nipple
Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing Anderson Pipe Nipple, Series: 38300-16, 1 in Nominal, NPT End, CLOSE in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0835, 1/2 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Brass Craft CSSTNN-16N Gas Appliance Connectors Harvey's 023030 Pipe Joint Compound Oatey 185 Cleanout Plug With Raised Head
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Brass cleanout plug with raised square head for use with slip joint pliers.
Harvey's 025020 Pipe Thread Compound Anderson Metal 738105-0604 Brass Pipe Fitting Anderson Metal 738105-0602 Brass Pipe Fitting
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Anderson Reducing Elbow, 3/8 x 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications Anderson Reducing Elbow, 3/8 x 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Anderson 38300-0445 Pipe Nipple Anderson 756116-06 Street Pipe Elbow Anderson 756122-12 Hex Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0445, 1/4 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. UPC individually bagged.
Anderson Metal 738105-0806 Brass Pipe Fitting Anderson 38300-0640 Pipe Nipple Anderson 38300-0450 Pipe Nipple
Anderson Reducing Elbow, 1/2 x 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications Anderson Pipe Nipple, Series: 38300-0640, 3/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0450, 1/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-1230 Pipe Nipple Anderson 38300-0840 Pipe Nipple B&K 108-904 Silcock Vacuum Breaker
Anderson Pipe Nipple, Series: 38300-1230, 3/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0840, 1/2 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Brass Craft CSSTNN-22N Gas Appliance Connectors Harvey's 043105 Plumbers Putty Anderson 738116-08 Street Pipe Elbow
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Will not harden, crack or crumble. Plastic putty for setting closet bowls, basin cocks, fixture faucets, strainers, sink frames, etc. Not for use on marble. Will not stick to hands. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Plumb Pak PP25502LF Saddle Valve Anderson 38300-1620 Pipe Nipple FURN PIPE GALV 6IN X 30IN 30GA
1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe. Anderson Pipe Nipple, Series: 38300-1620, 1 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Used to distribute warm and cold air.
Brass Craft CSSTNN-28N Gas Appliance Connectors Anderson 38300-0845 Pipe Nipple Anderson 38300-1235 Pipe Nipple
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Anderson Pipe Nipple, Series: 38300-0845, 1/2 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1235, 3/4 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson Metal 738119-1206 Brass Pipe Reducing Coupling Anderson Metal 738119-1208 Brass Pipe Fitting Rectorseal 31631 Tru-Blu
AMC Pipe Reducing Coupling, 3/4 x 3/8 in Nominal Size, IPT, Brass AMC Pipe Reducing Coupling, 3/4 x 1/2 in Nominal Size, IPT, Brass Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732.
Rectorseal 23631 T-Plus 2 Harvey's 029048 Pipe Thread Compound Anderson 38300-0650 Pipe Nipple
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Anderson Pipe Nipple, Series: 38300-0650, 3/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 15420 Pro Dope Anderson Metal 738105-1208 Brass Pipe Fitting Anderson Metal 738108-16 Brass Pipe Cap
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Anderson Reducing Elbow, 3/4 x 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Rectorseal 25631 Pipe Thread Sealant Anderson 38300-0460 Pipe Nipple Oatey 15804 Hercules Pipe Thread Sealant
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Anderson Pipe Nipple, Series: 38300-0460, 1/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732.
Anderson 38300-0850 Pipe Nipple Plumb Pak PP855-2LF Saddle Valve B&K 109-204 Self-Closing Drum and Barrel Faucet
Anderson Pipe Nipple, Series: 38300-0850, 1/2 in Nominal, NPT End, 5 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe. Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01.
Anderson 38300-1625 Pipe Nipple Anderson 7104SCSD Self-Tapping Saddle Valve Anderson 759103-0402 Angle Needle Shut-Off Valve
Anderson Pipe Nipple, Series: 38300-1625, 1 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines For use with copper tubing. Can be installed while line is under pressure. Valve has 1/4" compression connection and clamp will fit 3/8" thru 1-3/8" O.D. copper tubing. Includes valve, saddle, nuts, screws and washer. PIERCE PIN SHOWN IN CLOSED POSITION. Bagged. Anderson Needle Shut-Off Valve, Angle, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body, Chrome Plated Finish
Anderson 759106-04 Straight Needle Shut-Off Valve Anderson 38300-1240 Pipe Nipple Camco 9293 Thermocouple
Anderson Needle Shut-Off Valve, Straight, 1/4 in Nominal, Compression X Compression End, Brass Body Anderson Pipe Nipple, Series: 38300-1240, 3/4 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines With positioning adapters, fit RV gas water heaters and furnaces.
Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Camco 9273 Thermocouple Anderson 38300-0855 Pipe Nipple
Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. With positioning adapters, fit RV gas water heaters and furnaces. Anderson Pipe Nipple, Series: 38300-0855, 1/2 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0660 Pipe Nipple Anderson 38300-1250 Pipe Nipple Imperial GV0704-C Standard Straight Back Wall Register Boot
Anderson Pipe Nipple, Series: 38300-0660, 3/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1250, 3/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge.
Harvey's 023045 Pipe Joint Compound Anderson 38300-1245 Pipe Nipple Harvey's 025050 Pipe Thread Compound
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Anderson Pipe Nipple, Series: 38300-1245, 3/4 in Nominal, NPT End, 4-1/2 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle.
Honeywell CQ100A Thermocouple DUCT REDUCER 4IN - 3IN 30GA   Arrowhead Brass PK1430 Air Vent Assembly Kit
Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series.
Anderson 38300-1630 Pipe Nipple Anderson 38300-1260 Pipe Nipple Anderson 38300-0860 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-1630, 1 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1260, 3/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0860, 1/2 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 185 Cleanout Plug With Raised Head DUCT ANGLE BOOT 3-1/4X10X4IN  Brass Craft CSSTNN-34N Gas Appliance Connectors
Brass cleanout plug with raised square head for use with slip joint pliers. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Anderson 738116-12 Street Pipe Elbow Anderson 38300-1255 Pipe Nipple BrassCraftCSSLNN-10NGasApplianceConnectors
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-1255, 3/4 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Pro-Flex PFBC-AB Pro-Flex Bonding Clamps Brass Craft CSSL54-12 Gas Appliance Connectors Honeywell CQ100A Thermocouple
UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
Brass Craft CSSD54-12 Gas Appliance Connectors Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Anderson 38300-2020 Pipe Nipple
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Anderson Pipe Nipple, Series: 38300-2020, 1-1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 50873-0402 Needle Valve Oatey 15427 Pro Dope Brass Craft CSSLNN-16N Gas Appliance Connector
Anderson Needle Valve, 1/4 X 1/8 in Nominal, Plastic X Male Pipe End, -65 TO 250 deg F, Brass Body Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
BrassCraftCSSCNN-22NGasApplianceConnectors Oatey 185 Cleanout Plug With Raised Head Oatey 1023 Drum Trap Covers
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Brass cleanout plug with raised square head for use with slip joint pliers. 3-1/4"-4" adjustable drum trap cover with 5-1/4" stainless steel cover and rubber gasket.
Anderson Metal 738119-1612 Brass Pipe Fittings BrassCraftCSSLNN-22NGasApplianceConnectors FURN PIPE GALV 4INX60IN STD GA
AMC Pipe Reducing Coupling, 1 x 3/4 in Nominal Size, IPT, Brass Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Used to distribute warm and cold air.
Imperial GV0705-C Standard Straight Back Wall Register Boot Imperial GV0699-C Standard Straight Back Wall Register Boot BrassCraftCSSLNN-28NGasApplianceConnectors
Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
DUCT REDUCER 6IN - 4IN 30GA   DUCT REDUCER 7IN - 6IN 28GA   Imperial GV0626-C Wall Register Boot
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
Anderson 38300-1635 Pipe Nipple BOOT REGISTER UNIV 3.25X10X6IN Imperial GVO621-C Wall Register Boot
Anderson Pipe Nipple, Series: 38300-1635, 1 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Used for in-line transition from round pipe or insulated flexible duct to a register or grille. 30 gauge. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille.
Imperial GV0627-C Wall Register Boot DUCT REDUCER 6IN - 5IN 30GA   Imperial GV2451 Wall Stack Boot
Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Wall Stack Boot, 10 in Width x 3-1/4 in Depth, 6 in Collar, 90 deg, Galvanized
Imperial GV2450 Straight Back Wall Register Boot Pro-Flex PFMF-1212 Tube To Pipe Adapter Oatey 15806 Hercules Pipe Thread Sealant
Imperial Wall Register Boot, Straight Back, 10 in Width X 3 in Depth, 6 in Collar, Galvanized Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732.
Rectorseal 25551 Pipe Thread Sealant Brass Craft CSSLNN-34N Gas Appliance Connector Lambro 304 Flexible Duct Pipe
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps.
Rectorseal 23551 T-Plus 2 Pipe Thread Sealant Frost King SP55/6 Foil Fiberglass Wrap 15 ft L x 2 in T Brass Craft CSSTNN-46N Gas Appliance Connectors
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Foil and fiberglass wrap for heating and air conditioning ducts. Cushions and reduces vibrations. Can be taped securely in place. 12" Wide x 2" Thick x 15' Long. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Anderson 759101-0402 Straight Needle Shut-Off Valve Anderson 38300-1640 Pipe Nipple Anderson 38300-2030 Pipe Nipple
Anderson Needle Shut-Off Valve, Straight, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body Anderson Pipe Nipple, Series: 38300-1640, 1 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-2030, 1-1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Imperial GV0667-C Center Wall Register Boot DUCT ANGLE BOOT 3-1/4X10X6IN  Anderson 759106-06 Straight Needle Shut-Off Valve
Used for right-angle center-end transition from round pipe or insulated flexible duct to a register or grille. Used for right-angle transition from round pipe or insulated flexible duct to a register or grille. Anderson Needle Shut-Off Valve, Straight, 3/8 in Nominal, Compression X Compression End, Brass Body
Pro-Flex PFFN-1212 Tube To Pipe Adapter B and K Industries G014SS101118RP Gas Connectors Brass Craft CSSL54-18 Gas Appliance Connectors
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSNN-28N Gas Appliance Connector Oatey 185 Cleanout Plug With Raised Head Honeywell CQ100A Thermocouple
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Brass cleanout plug with raised square head for use with slip joint pliers. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
Brass Craft CSSC21-24 Gas Appliance Connectors Brass Craft CSSL54-36 Gas Appliance Connectors Brass Craft CSSL54-24 Gas Appliance Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSCNN-16N Gas Appliance Connector Anderson 7104SC Saddle Valve Kit Honeywell CQ100A Thermocouple
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. For installing automatic ice maker kits on refrigerators. Kit includes angle needle valve designed to control accurate water flow into evaporative cooler units, plus a saddle clamp that permits installation in water pipe nearest humidifier unit. Furnished complete with copper tube insert and gasket. Cadmium plated clamps and bolts. Saddle clamp made to fit 3/8", 1/2" and 3/4". Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
FURN PIPE GALV 6INX60IN STD GA Lambro 306 Flexible Duct Pipe Brass Craft CSSD54-18 Gas Appliance Connectors
Used to distribute warm and cold air. Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New