Home > HEATING & COOLING > HEAT & AIR CONDITIONING > REGISTERS & DEFLECTORS > CEILING / FLOOR DIFFUSERS
Sort By:
1
<
Anderson Metal 756109-02 Brass Pipe Plug Cored Square Head Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Anderson Metal 756103-02 Brass Pipe Coupling
Anderson Pipe Plug, Cored, Square Head, 1/8 in Nominal Size, MPT, Brass All installers must purchase and read the Installation/ Training Guide and return the qualified installer card on the back cover to Pro-Flex, LLC. All installations must be performed by a qualified person recognized by the local jurisdiction as capable of performing such work. AMC Pipe Coupling, Barstock, 1/8 in Nominal Size, Threaded, Brass
Anderson Metal 757001-0402 Insert Fittings Anderson Metal 757001-0202 Insert Fittings Anderson Metal 757014-04 Insert Fittings
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 756109-04 Brass Pipe Plug Cored Square Head Anderson Metal 756103-04 Brass Pipe Coupling Anderson Metal 757001-0602 Insert Fittings
Anderson Pipe Plug, Cored, Square Head, 1/4 in Nominal Size, MPT, Brass AMC Pipe Coupling, Barstock, 1/4 in Nominal Size, Threaded, Brass Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757014-06 Insert Fittings Anderson Metal 757014-05 Insert Fittings Anderson Metal 756109-06 Brass Pipe Plug Cored Square Head
Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Plug, Square Head, 3/8 in Nominal Size, MPT, Brass
Anderson Metal 757001-0404 Insert Fitting Anderson Metal 757014-03 Insert Fittings Pro-Flex PFSP-0302 Pro-Flex Striker Plate
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Protective devices required where tubing passes through structural members.
Anderson Metal 757001-0604 Insert Fittings Anderson Metal 757001-0804 Insert Fittings Pro-Flex Floppy-Flex Protective Conduit
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 12" long floppy-flex galvanized protective conduits for CSST tubing.
Anderson Metal 757001-0606 Insert Fitting Anderson Metal 756103-06 Brass Pipe Coupling Anderson 756100-02 Pipe Elbow
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. AMC Pipe Coupling, Barstock, 3/8 in Nominal Size, Threaded, Brass Anderson Pipe Elbow, Series: 756100-02, 1/8 in Nominal, FIP End, 90 deg, 1000 psi Working, Brass, Yellow, 250 deg F, Federal Public Law 111-380
Oatey 30779 All Purpose Pipe Cleaner Anderson Metal 738103-04 Brass Pipe Fitting Anderson 738100-04 Pipe Elbow
For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. AMC Pipe Coupling, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Elbow, Series: 738100-04, 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 738100-06 Pipe Elbow Anderson Metal 738103-06 Brass Pipe Coupling Anderson 738100-02 Pipe Elbow
Anderson Pipe Elbow, Series: 738100-06, 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water AMC Pipe Coupling, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Elbow, Series: 738100-02, 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson Metal 738103-02 Brass Pipe Coupling Anderson Metal 757014-08 Insert Fittings Anderson Metal 738109-08 Brass Pipe Fittings
AMC Pipe Coupling, 1/8 in Nominal Size, FPT, Brass Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Plug, Cored, 1/2 in Nominal Size, IPT, Brass
Oatey 30755 PVC/CPVC Primer Anderson Metal 757001-0806 Insert Fitting Anderson Metal 757014-10 Insert Fittings
A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Rectorseal 55910 PVC/CPVC Primer/Cleaner Anderson Metal 756101-02 Brass Pipe Tee Anderson Metal 757001-1006 Insert Fittings
Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2  turns past finger tight. Female pipe three ends. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson 738107-06 Pipe Elbow Anderson 738107-02 Pipe Elbow Anderson 738107-04 Pipe Elbow
Anderson Pipe Elbow, Series: 738107-06, 3/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-02, 1/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-04, 1/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Harvey's 019050-24 PVC/CPVC Purple Primer Imperial GV0748 Round Damper With Duct Key Oatey 30780 PVC/CPVC Primer/Cleaner
Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. Use to adjust and balance airflow in individual runs of round pipe. Purple-tinted all purpose primer/cleaner for PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime as well as softens pipe in preparation for solvent cement. Purple tint for verification for code. Apply at temperatures 40 degrees Fahrenheit to 100 degrees Fahrenheit.
Pro-Flex PFSP-0307 Pro-Flex Striker Plate Anderson Metal 738109-12 Brass Pipe Fitting Anderson Metal 738103-08 Brass Pipe Fittings
Protective devices required where tubing passes through structural members. Anderson Pipe Plug, Cored, 3/4 in Nominal Size, IPT, Brass AMC Pipe Coupling, 1/2 in Nominal Size, FPT, Brass
Pro-Flex Floppy-Flex Protective Conduit Oatey 30750 Pipe Primer/Cleaner Harvey 019100-24 All Purpose Pipe Cleaner
12" long floppy-flex galvanized protective conduits for CSST tubing. Recommended for use with PVC and CPVC pipe and fittings. Formulated to remove dirt and oil from the surface of the piping, as well as soften the piping in preparation for solvent welding. NSF Standard 61 listed for PW, DWV, and sewer. Meets ASTM standard F 656. All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can.
Anderson Metal 738101-06 Brass Pipe Fitting Anderson Metal 738101-04 Brass Pipe Fitting Anderson 738107-08 Pipe Elbow
Anderson Pipe Tee, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Tee, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Elbow, Series: 738107-08, 1/2 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Imperial GV0957-B Side Take-Off Harvey 019110-24 All Purpose Pipe Cleaner Anderson 738100-08 Pipe Elbow
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. Anderson Pipe Elbow, Series: 738100-08, 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Rectorseal 55912 PVC/CPVC Primer/Cleaner Anderson Metal 757001-0808 Insert Fittings Oatey 30756 PVC/CPVC Primer
Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656.
Anderson Metal 738109-16 Brass Pipe Plug Cored Mueller ProLine 2-Piece Gas Ball Valve NDS 107 Standard Round Valve Box With Overlapping ICV Cover
Anderson Pipe Plug, Cored, 1 in Nominal Size, IPT, Brass Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 6", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved.
Harvey's 019060-24 PVC/CPVC Purple Primer Harvey 19520 All Purpose Pipe Cleaner Anderson Metal 757001-1208 Insert Fittings
Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. Convenient project pack contains 4 oz. all-purpose pipe cleaner, and 4 oz. multi-purpose solvent cement. For most ABS, PVC, or CPVC projects. Twin pack. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757001-1212 Insert Fitting Anderson Metal 738103-12 Brass Pipe Fittings Anderson Metal 757001-0608 Insert Fitting
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. AMC Pipe Coupling, 3/4 in Nominal Size, FPT, Brass Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757001-1008 Insert Fitting Oatey 30783 PVC/CPVC Primer/Cleaner Anderson Metal 738101-08 Brass Pipe Fitting
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Purple-tinted all purpose primer/cleaner for PVC and CPVC pipe and fittings. Removes surface dirt, grease and grime as well as softens pipe in preparation for solvent cement. Purple tint for verification for code. Apply at temperatures 40 degrees Fahrenheit to 100 degrees Fahrenheit. Anderson Pipe Tee, 1/2 in Nominal Size, FPT, Brass
Harvey 019120-12 All Purpose Pipe Cleaner FURN PIPE GALV 6IN X 30IN 30GA Harvey's 019550 Primer/Cement Pack
All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. Used to distribute warm and cold air. Convenient project pack contains 4 oz. purple primer, and 4 oz. blue PVC wet set cement. For most wet condition projects. Twin pack.
VALVE 1/2IN FIP X FIP         Rectorseal 55914 PVC/CPVC Primer/Cleaner Anderson 738100-12 Pipe Elbow
Yellow handle. 1/2 PSI maximum working pressure. Hi etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for superior bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both Schedule 40 and Schedule 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Anderson Pipe Elbow, Series: 738100-12, 3/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Brass Craft PSBV503-8 Quarter Turn Gas Ball Valve Harvey's 019530 Primer/Cement Pack Oatey 30246 Primer/Cement Pack
Gas appliance connector with lever handle. AGA Design Certified. Convenient project pack contains 4 oz. purple primer and 4 oz. PVC solvent cement. For most PVC pipe projects. Twin pack. Contains one can of  regular clear PVC cement, and one can of NSF purple primer. Ideal size for most pipe installations.
Anderson 738124-08 Street Pipe Elbow Oatey 30782 All Purpose Pipe Cleaner Anderson 738107-12 Pipe Elbow
Anderson Street Pipe Elbow, Series: 738124-08, 1/2 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. Anderson Pipe Elbow, Series: 738107-12, 3/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
PRIMER CPVC/PURPLE HANDY 4OZ  Brass Craft PSSL-12 Gas Ball Valves Anderson Metal 757001-0302 Insert Fittings
Contains 1 can of CPVC Cement and 1 can of NSF Purple Primer. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Brass Craft PSSD-41 Quarter Turn Gas Ball Valve VALVE 3/8IN FIP X FIP         Mueller ProLine 1-Piece Gas Ball Valve
Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Yellow handle. 1/2 PSI maximum working pressure. Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Anderson 738124-12 Street Pipe Elbow VALVE 1/2IN FIP X FIP 1 PIECE
Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Anderson Street Pipe Elbow, Series: 738124-12, 3/4 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Yellow handle. 1/2 PSI maximum working pressure.
Anderson Metal 738114-16 Brass Pipe Plug VALVE 3/4IN FIP X FIP         Anderson Metal 738103-16 Brass Pipe Fitting
Anderson Pipe Plug, Solid, 1 in Nominal Size, IPT, Red Brass Yellow handle. 1/2 PSI maximum working pressure. AMC Pipe Coupling, 1 in Nominal Size, FPT, Brass
Anderson Metal 738101-12 Brass Pipe Fittings DUCT REDUCER 4IN - 3IN 30GA   Brass Craft TBV6F-8 Quarter Turn Gas Ball Valve
Anderson Pipe Tee, 3/4 in Nominal Size, FPT, Brass Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16
Brass Craft TBVF8 Quarter Turn Gas Ball Valve Mueller ProLine 1-Piece Gas Ball Valve Anderson Metal 738109-24 Brass Pipe Fitting
Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Anderson Pipe Plug, Cored, 1-1/2 in Nominal Size, IPT, Brass
B K Industries 117-592 Gas Ball Valves Pro-Flex PFBC-AB Pro-Flex Bonding Clamps Mintcraft SRSD06 Round Ceiling Diffuser 6 in W
Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. White round ceiling diffuser, with 3 pcs screws. 1 pc /shrink with color label.
Mueller ProLine 2-Piece Gas Ball Valve Pro-Flex PFAP-3410 Pro-Flex Accessory Pack VALVE 3/4IN FIP X FIP 1 PIECE
Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. Includes: 4 retainer rings,  2 each - slide rings, silicone O-rings, high temperature sealing gaskets. Replacement parts for lost or broken components. Yellow handle. 1/2 PSI maximum working pressure.
Anderson Metal 757001-0304 Insert Fittings Harvey's 019070-12 PVC/CPVC Purple Primer Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
Mueller ProLine 1-Piece Gas Ball Valve FURN PIPE GALV 4INX60IN STD GA DUCT REDUCER 6IN - 4IN 30GA
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Used to distribute warm and cold air. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end.
DUCT REDUCER 7IN - 6IN 28GA   DUCT REDUCER 6IN - 5IN 30GA   Brass Craft PSBV503-12 Quarter Turn Gas Ball Valve
Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Used to reduce diameter of galvanized round perimeter pipe. Crimped on small end. Gas appliance connector with lever handle. AGA Design Certified.
Pro-Flex PFMF-1212 Tube To Pipe Adapter Harvey 019130-12 All Purpose Pipe Cleaner Anderson 738100-16 Pipe Elbow
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. All-purpose pipe cleaner designed to thoroughly clean pipe. Can be used on ABS, CPVC, and PVC pipe and fittings. Apply at temperatures from 40 degrees to 110 degrees fahrenheit. Flows freely and evaporates quickly. Dauber can. Anderson Pipe Elbow, Series: 738100-16, 1 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Lambro 304 Flexible Duct Pipe Mintcraft SRSD08 Round Ceiling Diffuser 8 in W VALVE1/2IN FIP X 15/16IN FLARE
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. White round ceiling diffuser, with 3 pcs screws. 1 pc /shrink with color label. Yellow handle. 1/2 PSI maximum working pressure.
Oatey 30757 PVC/CPVC Primer Frost King SP55/6 Foil Fiberglass Wrap 15 ft L x 2 in T Pro-Flex PFFN-1212 Tube To Pipe Adapter
A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. Foil and fiberglass wrap for heating and air conditioning ducts. Cushions and reduces vibrations. Can be taped securely in place. 12" Wide x 2" Thick x 15' Long. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Oatey 30795 All Purpose Pipe Cleaner Anderson Metal 738103-20 Brass Pipe Coupling B and K Industries 115-503 Gas Ball Valve
For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. AMC Pipe Coupling, 1-1/4 in Nominal Size, FPT, Brass Forged brass 1-piece body with chrome-plated forged brass ball and coated aluminum handle. Threaded flare ends comply to SAE F513. For natural gas, also approved for use with water up to 175 PSI. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. UPC coded bulk.
Mueller ProLine 1-Piece Gas Ball Valve VALVE 3/4IN FIP X 15/16 FLARE Anderson Metal 757001-0504 Insert Fittings
1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA Certified. Threaded flare ends comply to SEA J513. CSA Z21 (PSIG) certified. Yellow handle. 1/2 PSI maximum working pressure. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
VALVE 3/4IN FIP X 5/8IN FLARE FURN PIPE GALV 6INX60IN STD GA Lambro 306 Flexible Duct Pipe
Yellow handle. 1/2 PSI maximum working pressure. Used to distribute warm and cold air. Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps.
Brass Craft PSSC-61 Gas Ball Valves Brass Craft PSSC-60 Quarter Turn Gas Ball Valve NDS 111BC Standard Round Valve Box With Overlapping ICV Cover
Non-replaceable rotor. 6.9"L x 4.9"W x 1.9"D Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 6", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved.
Imperial GV0945-C Adjustable Round Duct Take Off Anderson Metal 756121-02 Brass Pipe Fitting Anderson Metal 738114-20 Brass Pipe Fitting
Used for transition from rectangular duct to round pipe or insulated flexible duct. Adjustable from 0 Deg.  to 90 Deg. (.30 gauge). One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Pipe Plug, Solid, 1-1/4 in Nominal Size, IPT, Red Brass
Imperial GV0959-C Side Take-Off Anderson Metal 738101-16 Brass Pipe Fitting B and K Industries 110-225/110-125 Gas Ball Valve
Used for transition from air plenums or rectangular duct to round pipe or insulated duct. 30 gauge. Anderson Pipe Tee, 1 in Nominal Size, FPT, Brass -20 Deg. F ? 300 Deg. F temperature range, quarter-turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance, multi-directional flow, two-piece body design, chrome-plated brass ball, CSA - ANSI Z21.15, (1/2 PSIG), ANSI/ASME B16.44 (5G), UL listed, threaded ends comply with ANSI B1.20.1. Rated for 200 PSI
Pro-Flex PFMF-3406 Tube To Pipe Adapter Anderson 738100-20 Pipe Elbow Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve
Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Anderson Pipe Elbow, Series: 738100-20, 1-1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
Lambro 308 Flexible Duct Pipe CLEANER CLEAR 32 OUNCE        Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. For plastic pipes and fittings, all Schedules and all diameters. A fast-acting cleaner to remove surface dirt, grease and grime. Flows freely and evaporates quickly. Does not penetrate pipe surface. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1
VALVE 1IN FIPX1IN FIP TEE HNDL Anderson Metal 738103-24 Brass Pipe Fitting Pro-Flex PFFN-3406 Tube To Pipe Adapter
Yellow handle. 1/2 PSI maximum working pressure. AMC Pipe Coupling, 1-1/2 in Nominal Size, FPT, Brass Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing.
Anderson Metal 738114-04 Brass Pipe Plug Anderson Metal 738114-02 Brass Pipe Plug Anderson Metal 738114-06 Brass Pipe Plug
Anderson Pipe Plug, Solid, 1/4 in Nominal Size, IPT, Red Brass Anderson Pipe Plug, Solid, 1/8 in Nominal Size, IPT, Red Brass Anderson Pipe Plug, Solid, 3/8 in Nominal Size, IPT, Red Brass
Anderson Metal 757002-0606 Insert Fittings Anderson Metal 757002-0604 Insert Fittings Anderson Metal 757002-0404 Insert Fittings
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps Anderson Metal 756121-08 Brass Pipe Plug Cored Hex Head Harvey's 019080-12 PVC/CPVC Purple Primer
UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Designed to remove gloss, dirt and grease.  Softens and penetrates bonding surfaces of PVC and CPVC pipe and fittings. Recommended for use on high gloss, hard finish bell end pipe or fittings. Apply at temperature from 40 to 110 degrees F. NSF certified. Meets performance requirements of ASTM F-656. Dauber can.
VALVE 1/2IN MIP X CSST DIRECT Anderson Metal 757002-0406 Insert Fittings Anderson Metal 756121-04 Brass Pipe Plug Cored Hex Head
Yellow handle. 1/2 PSI maximum working pressure. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Anderson 738100-24 Pipe Elbow PRIMER PURPLE 32 OUNCE        Anderson Metal 757002-0804 Insert Fittings
Anderson Pipe Elbow, Series: 738100-24, 1-1/2 in Nominal, IPT End, 90 deg, Brass, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water A purple-tinted aggressive primer recommended for use on PVC and CPVC pipe and fittings, all Schedules and diameters. Formulated to remove surface dirt, grease and grime as well as soften the pipe surface to allow for a fast, secure and permanent solvent weld. For use in areas where the code calls for verification that a primer has been used.  Recommended for all PVC and CPVC installations.  NSF listed.  Meets ASTM F-656. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757002-0504 Insert Fittings DIFFUSER CEILING ROUND 6IN WHT Brass Craft CSSC22-36P Procoat
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. For wall and ceiling applications. Fully adjustable air-flow. Includes mounting collar. Made of polypropylene. Can be used as a supply or exhaust air diffuser. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings.
Anderson Metal 757002-0202 Insert Fittings Anderson Metal 757001-0506 Insert Fittings Anderson Metal 757001-0406 Insert Fittings
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
NDS Standard Rectangular Valve Box With Overlapping ICV Cover Brass Craft CSSC22-48P Procoat DIFFUSER CEILING ROUND 8IN WHT
ICV valve box with overlapping cover, Black/Green.14 In. x 19 In. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/2" ID (5/8" OD) tube with fittings. For wall and ceiling applications. Fully adjustable air-flow. Includes mounting collar. Made of polypropylene. Can be used as a supply or exhaust air diffuser.
Anderson Metal 757001-0204 Insert Fittings Anderson Metal 757002-0806 Insert Fittings Brass Craft CSSL115E-36P Gas Appliance Connector
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Brass Craft CSSD105E-36P Gas Appliance Connector Pro-Flex PFST-12 Pro-Flex Termination Plates Brass Craft CSSC91E-48P Gas Appliance Connectors
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Brass Craft CSSD54-60P Procoat Pro-Flex PFTE-BBB6 Tube Tee VALVE 3/4IN MIP X CSST DIRECT
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Yellow handle. 1/2 PSI maximum working pressure.
Pro-Flex PFMN-CCB 4-Port Pipe Manifold Pro-Flex PFMN-BBB 4-Port Pipe Manifold Imperial GV0752 Round Damper With Duct Key
Each manifold has 4 1/2" female (FIP) branches. Each manifold has 4 1/2" female (FIP) branches. Use to adjust and balance airflow in individual runs of round pipe.
DUCT WYE GALV 4 X 4 X 4IN 30GA FURN GALVANIZED 28GA 8X60IN   Brass Craft CSSD105E-48P Gas Appliance Connectors
Used primarily for heating & air conditioning applications for transition from one round pipe two round pipes. Used to distribute warm and cold air. Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested.
Anderson Metal 756121-06 Brass Pipe Plug Cored Hex Head Anderson Metal 757001-0408 Insert Fittings Anderson Metal 738101-02 Brass Pipe Tee
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Tee, 1/8 in Nominal Size, FPT, Brass
Brass Craft CSSC91E-48P Gas Appliance Connectors Pro-Flex PFST-34 Pro-Flex Termination Plates Master Flow F6IFD Flexible Insulated Air Duct Pipe
Coated stainless steel gas connector with excess flow valve. The Safety+Plus flow valve is an automatic safety valve for gas designed to help prevent fires and explosions due to gas line ruptures or disconnects at the appliance. It is equipped with automatic reset and automatic valve activation. The ProCoat polymer-based coating resists corrosion from harsh chemicals found in common household cleaning, plumbing repair, and masonry products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of the UV rays and salt. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Leak tested. Includes attached fitting complete with all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble to Pro-Flex tubing. Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber.
DUCT WYE GALV 5 X 5 X 5IN 30GA Pro-Flex PFTE-CCB6 Tube Tee Anderson Metal 757020-0604 Insert Fittings
Used primarily for heating & air conditioning applications for transition from one round pipe two round pipes. Includes all components (Retainer Ring, Slide Ring, O-ring, and High Temperature Gasket) required to assemble each branch to Pro-Flex tubing. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
DUCT WYE GALV 6 X 6 X 6IN 30GA Anderson Metal 757002-0608 Insert Fittings Master Flow F6IFD Flexible Insulated Air Duct Pipe
Used primarily for heating & air conditioning applications for transition from one round pipe two round pipes. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber.
Anderson Metal 757002-0808 Insert Fittings Anderson Metal 757002-0506 Insert Fittings Anderson Metal 757001-0812 Insert Fittings
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Master Flow F6IFD Flexible Insulated Air Duct Pipe Master Flow 12SCF400X Duct Collar Master Flow F8IFD Flexible Insulated Duct Pipe
Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber. For flexible duct or pipe. For transition from flat surface or internally lined, unlined ductboard plenums to round pipe or insulated flexible duct. Snap together. Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber.
Master Flow F8IFD Flexible Insulated Duct Pipe Master Flow F6IFD Flexible Insulated Air Duct Pipe Master Flow F8IFD Flexible Insulated Duct Pipe
Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber. Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber. Metalized jacket, single strand fiberglass yarns for added strength and tear resistance. 2" thick glass fiber.
Master Flow 12SCF800X Duct Collar Pro-Flex PFCT-1225 Pro-Flex Master Flow 12SCF600X Duct Collar
For flexible duct or pipe. For transition from flat surface or internally lined, unlined ductboard plenums to round pipe or insulated flexible duct. Snap together. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. For flexible duct or pipe. For transition from flat surface or internally lined, unlined ductboard plenums to round pipe or insulated flexible duct. Snap together.
Pro-Flex PFCT-3425 Pro-Flex Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit United States Stove UFB908 Dust Filter Box
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Includes: 25 ft. 1/2"  CSST flexible gas piping, one 1/2"  brass male fitting, one 1/2" special termination plate with male fittings, 1/2" MIP x 1/2" FIP ball valve connector - 24" long, 1/2" flare x 3/8" MIP union fitting, spool of yellow teflon tape, bottle leak detector, bonding clamp, installation/training guide and fitting assembly sheet. Designed to be installed on any add on furnace. Specifically, it covers the blowers and allows for connection to the existing HVAC return duct work or to newly installed ducting. It comes with an integrated slot for a 16" x 20" air filter. Made of durable Galvanized steel. For units: 1300, 1537G, 1602, 1802, 24AF, 1400, 1500, 1557M, 1602M, 24A, and 30A.
Pro-Flex PFCT-1275 Pro-Flex Pro-Flex PFCT-3475 Pro-Flex Pro-Flex PFCT-12225 Pro-Flex