Home > HEATING & COOLING > HEAT & AIR CONDITIONING > REGISTERS & DEFLECTORS > FLOOR REGISTERS
Choose a sub category:
CORRUGATED FLEXIBLE GAS SUPPLY CORRUGATED SS TUBING-PROFLEX CORRUGATED SS TUBING-PROFLEX
BRASS FITTINGS/ACCESSO-PROFLEX BRASS FITTINGS/ACCESSO-PROFLEX FLEXIBLE STAINLESS GAS SUPPLY
FLEXIBLE GAS PIPING SYSTEM
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape Harvey's 017117B Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Plumb Pak 04151 Pipe Thread Seal Tape Anderson Metal 756110-0402 Brass Pipe Hex Bushing World Wide Sourcing PMB-042 Sillcock Handle
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia
Anderson Metal 756108-02 Brass Pipe Cap Plumb Pak PP20855100 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. For use on plumbing threads to prevent leaking. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Anderson Metal 756110-0604 Brass Pipe Fittings Danco 80416 Square Broach Valve Wheel Handle Danco 80417 Round Broach Valve Wheel Handle
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel
FAUCET HANDLE WHEEL ROUND 12PT Anderson Metal 756108-04 Brass Pipe Cap Mintcraft PMB-5053L Sillcock Keys
Metal construction. 12pt. round broach. Metallic finish. Designed to fit hose bibb faucets, stopcocks and valves. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Sillcock key for 1/4" stem. For use on outside water faucets.
Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle Anderson 756116-02 Street Pipe Elbow Anderson Metal 756110-0602 Brass Pipe Hex Bushing
Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Harvey's 017252-144 Pipe Thread Seal Tape Anderson Metal 756108-06 Brass Pipe Cap Anderson Metal 738108-04 Brass Pipe Cap
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738108-02 Brass Pipe Cap Anderson Metal 738108-06 Brass Pipe Cap Anderson Metal 738110-0806 Brass Pipe Fittings
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Plumb Pak PP806-1 Sillcock Faucet Wheel Handle Plumb Pak PP806-11 Sillcock Faucet Handle GRILL RETURN AIR 2.25X12IN WHT
Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems 12 point All-steel construction. Widespread air diffusion. May be used as outlet or inlet. Durable powder-coat painted finish. Mounting holes at each end.
TAPE SEAL PTFE 1X520          GRILL RETURN AIR 4X10IN WHT   SILLCOCK KEY 5/16IN
SILLCOCK KEY 5/16IN
Our Price: $3.39
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. All-steel construction. Widespread air diffusion. May be used as outlet or inlet. Durable powder-coat painted finish. Mounting holes at each end. Used to open and close sillcocks or spigots. This key will fit 5/16 inch valves. Constructed of metal to provide strength and durability.
Anderson Metal 756110-0804 Brass Pipe Fitting Harvey's 017165-144 Pipe Thread Seal Tape Anderson 756116-04 Street Pipe Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Oatey 31403 Gas Line Thread Tape Oatey 31402D Water Line Thread Seal Tape Harvey's 017065 Pipe Thread Seal Tape
Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box. Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed.
Plumb Pak PP806-10 Sillcock Faucet Handle Anderson Metal 738108-08 Brass Pipe Fittings Anderson Metal 756110-0802 Brass Pipe Hex Bushing
16 point One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Oatey 30999 ABS Cement Oatey 31012 PVC Cement REGISTER PLASTIC 4 X 10IN ALM
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation.
REGISTER FLOOR WHT 2-1/4X12IN REGISTER FLOOR 2-1/4X12IN BRN REGISTER FLOOR 4X10IN WHT
High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation.
Harvey's 018100-24 P-4 Oatey 30890 Rain-R-Shine Anderson Metal 738110-1208 Brass Pipe Fittings
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-1206 Brass Pipe Hex Bushing Oatey 30883 PVC Cement Harvey's 018400-24 PVC Cement
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40-110 degrees. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 31128 CPVC Pipe and Fitting Cement REGISTER FLOOR 4X12IN WHT     REGISTER PLASTIC 4 X 12IN ALM
Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation.
Harvey's 018450-24 P-6E Plumb Pak PP806-15 Tee Valve Faucet Handle Oatey 30818 All-Purpose Cement
For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set; designed for use on all duct and conduit applications through 6" in diameter. Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified for use in potable water, sewer, drain, and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can. Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Harvey's 018500-24 A-6 Anderson Metal 738110-1204 Brass Pipe Fitting Anderson Metal 738110-0804 Brass Pipe Fitting
Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738108-12 Brass Pipe Fitting Oatey 30850 PVC Cement Plumb Pak PP874-00PC Shut Off Key
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Key for loose key stops. Tamper proof.
Anderson 38310-06 Pipe Nipple Rectorseal 55902 PVC Cement Harvey's 018110-24 P-4
Anderson Pipe Nipple, Series: 38310-06, 3/8 in Nominal, MPT End, Close Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers, and drain, waste and vent (DWV). For use on PVC pipe through 2" Schedule 40 pressure piping and up to and including 4" Schedule 40 non-pressure (DWV) piping; it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 018700-24 C-4 Harvey's 018200-24 P-2 PVC Cement Oatey 31129 CPVC Pipe and Fitting Cement
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
REGISTER FLOOR 2-1/4X10IN WHT REGISTER FLOOR 2-1/4X10IN BRN REGISTER FLOOR 4X10IN BRN
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Harvey's 018000-24 Mp-6 Oatey 30917 ABS Cement REGISTER FLOOR 4X10IN WHT
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings up to 6" in diameter. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. SALES AREA - ONLY IN THE WESTERN REGION. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Oatey 31013 PVC Cement Anderson 738116-04 Street Pipe Elbow Anderson 738116-02 Street Pipe Elbow
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 738116-06 Street Pipe Elbow REGISTER FLOOR 2-1/4X10IN BRN REGISTER FLOOR 2-1/4X12IN WHT
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
REGISTER CEILING WHITE 4X10IN REGISTER CEILING 3X10IN WHITE Oatey 31910 Flow-Guard Gold
All-steel construction. Widespread air diffusion, damper control, rolled fin for strength and safety. Painted metal grill have a durable powder-coat painted finish. Mounting holes at each end, screws included. All-steel construction. Widespread air diffusion, damper control, rolled fin for strength and safety. Painted metal grill have a durable powder-coat painted finish. Mounting holes at each end, screws included. Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Arrowhead PK1250 Sillcock Wheel Handle Anderson Metal 738105-0604 Brass Pipe Fitting Anderson Metal 738105-0602 Brass Pipe Fitting
Green wheel handle and stainless steel screw. Fits all models. Anderson Reducing Elbow, 3/8 x 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications Anderson Reducing Elbow, 3/8 x 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Mintcraft FR01-2X10B Floor Register Mintcraft FR01-2X10W Floor Register Anderson 756116-06 Street Pipe Elbow
Mintcraft Floor Register, 2 in Duct Height, 10 in Duct Width, 3-7/8 in Overall Length, 9-5/8 in Overall Width, Metal, Brown Mintcraft Floor Register, 2 in Duct Height, 10 in Duct Width, Steel, White One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Mintcraft FR01-2X12W Floor Register Mintcraft FR01-2X12B Floor Register Anderson Metal 738110-1612 Brass Pipe Fittings
Mintcraft Floor Register, 2 in Duct Height, 12 in Duct Width, Steel, White Mintcraft Floor Register, 2 in Duct Height, 12 in Duct Width, Steel, Brown One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-1608 Brass Pipe Hex Bushing Danco 10006 Faucet Handle with Adapter Oatey 30900 ABS/PVC Transition Cement
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Fits all outdoor faucets. Larger, ergonomic handle is easier to turn on/off. Durable construction (heavier gauge zinc). Includes universal adapter and screws. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138.
REGISTER FLOOR 4X8IN WHT      REGISTER FLOOR 4X8IN BRN      REGISTER FLOOR 4X12IN BRN
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Rectorseal 55970 Abs/PVC/CPVC Cement Anderson Metal 738105-0806 Brass Pipe Fitting Harvey's 018510-24 A-6
Medium body multipurpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2" Schedule 40 and non-pressure piping systems through 6" Schedule 40 (excluding Schedule 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. Anderson Reducing Elbow, 1/2 x 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
REGISTER FLOOR 4X12IN WHT     Harvey's 018410-24 PVC Cement Harvey's 018210-24 P-12
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
REGISTER POP-UP 4X10IN WHT    Arrowhead PK1290 Oval Sillcock Wheel Handle Mintcraft FR01-2X14W Floor Register
High-impact polystyrene construction. Rust proof and scratch resistant. Use as conventional register when closed. Use as air deflector when open. Knockout at each end for ceiling installation. Green wheel handle and stainless steel screw. Fits all models. Mintcraft Floor Register, 2 in Duct Height, 14 in Duct Width, White
Mintcraft FR01-2X14B Square Floor Register REGISTER FLOOR 2-1/4X14IN WHT Mintcraft FR01-4X10B Floor Register
Mintcraft Floor Register, Square, 2 in Duct Height, 14 in Duct Width, 4 in Overall Length, 13-3/8 in Overall Width, Steel, Brown, Enamel, 17 sq-in Free Area All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Mintcraft Floor Register, 4 in Duct Height, 10 in Duct Width, Steel, Brown
Mintcraft FR01-4X10W Floor Register Oatey 30821 All-Purpose Cement REGISTER FLOOR 2-1/4X14IN BRN
Mintcraft Floor Register, 4 in Duct Height, 10 in Duct Width, Steel, White Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Anderson 738116-08 Street Pipe Elbow Oatey 31911 Flow-Guard Gold Arrowhead Brass PK1300 Loose Key Handle
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. Loose key handle. Fits all models.
Oatey 30891 Rain-R-Shine Harvey's 018710-24 C-4 CPVC Cement FURN PIPE GALV 6IN X 30IN 30GA
Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Used to distribute warm and cold air.
REGISTER FLOOR 2-1/4X12IN BRN Oatey 32161 Hot Blue Lava PVC Cement Anderson 38310-0620 Pipe Nipple
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Anderson Pipe Nipple, Series: 38310-0620, 3/8 in Nominal, MPT End, 2 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines
PlumbPak PP33-10PCLF Pipe Nipple Harvey's 018010-24 Mp-6 Anderson Metal 738105-1208 Brass Pipe Fitting
Carded. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Anderson Reducing Elbow, 3/4 x 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Anderson Metal 738108-16 Brass Pipe Cap REGISTER POP-UP 4X12IN WHT    REGISTER FLOOR 4X12IN BRS
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. High-impact polystyrene construction. Rust proof and scratch resistant. Use as conventional register when closed. Use as air deflector when open. Knockout at each end for ceiling installation. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish.
Harvey's 018120-12 P-4 Harvey's 018220-12 P-2 PVC Cement Oatey 30863 PVC Cement
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
Mintcraft FR01-4X12B Floor Register Mintcraft FR01-4X12W Floor Register Camco 9293 Thermocouple
Mintcraft Floor Register, 4 in Duct Height, 12 in Duct Width, Steel, Brown Mintcraft Floor Register, 4 in Duct Height, 12 in Duct Width, Steel, White With positioning adapters, fit RV gas water heaters and furnaces.
Oatey 31094 PVC Cement PlumbPak PP33-40PCLF Pipe Nipple REGISTER FLOOR 4X10IN BRN
Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Carded. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Camco 9273 Thermocouple REGISTER FLOOR 4X12IN BRN     Oatey 30925 ABS/PVC Transition Cement
With positioning adapters, fit RV gas water heaters and furnaces. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138.
Oatey 31014 PVC Cement Honeywell CQ100A Thermocouple Anderson 38310-0825 Pipe Nipple
Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. Anderson Pipe Nipple, Series: 38310-0825, 1/2 in Nominal, MPT End, 2-1/2 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 30812 Bonding Adhesive Anderson 38310-0630 Pipe Nipple Anderson Metal 738110-2016 Brass Pipe Fitting
X-15 PVC bonding adhesive is formulated for use to join two sheets of PVC shower pan liner membrane together. Provides permanent, watertight seal to form larger membrane for use in tile shower or other concealed water-proofing applications. Anderson Pipe Nipple, Series: 38310-0630, 3/8 in Nominal, MPT End, 3 in Length, Red? Brass, Chrome Plated, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Mintcraft T1543L Sillcock Key REGISTER FLOOR 2-1/4X14IN BRN Oatey 32166 Hot Orange Lava
Hardened steel. Designed to fit 1/4", 9/32", 5/16", and 11/32" square stem. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846.
Anderson 738116-12 Street Pipe Elbow REGISTER FLOOR 4X14IN WHT     Honeywell CQ100A Thermocouple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
Harvey's 018720-12 C-4 CPVC Cement Harvey's 018420-12 PVC Cement Harvey's 018020-12 Mp-6
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can.
Oatey 30834 All-Purpose Cement REGISTER FLR LVRD 4 X 10IN ORB REGISTER FLR LVRD 4 X 12IN ORB
Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish.
REGISTER FLR 4IN X 10IN SNKL  REGISTER FLR 4IN X 12IN SNKL  FURN PIPE GALV 4INX60IN STD GA
All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. Used to distribute warm and cold air.
Plumb Pak PP855-1 Pipe Thread Seal Tape Oatey 30902 ABS Cement Harvey's 018320-12 PVC Cement
For use on plumbing threads to prevent leaking. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Fast setting, all-weather, medium bodied PVC solvent cement specifically recommended for cold weather and fast setting pressure applications. Recommended for pressure pipe: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Formulated for fast initial set up at temperatures down to 10 degrees fahrenheit. Effective temperature range -15 degrees to 110 degrees fahrenheit. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 30876 PVC Cement Oatey 31121 PVC Cement Lambro 304 Flexible Duct Pipe
Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps.
Oatey 31132 PVC Cement Oatey 30893 Rain-R-Shine Oatey 31095 PVC Cement
Medium-bodied clear cement for use on PVC pipe and fittings. Up to 6" diameter. Formulated for fast initial set-up at temperatures down to -15 degrees F to 100 degrees F. schedule 40 and schedule 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit, and DWV. Non-pressure, DWV, up through 4" diameter: no primer needed where local codes permit. Meets ASTM D-2564. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
Honeywell CQ100A Thermocouple Oatey 31015 PVC Cement Honeywell CQ100A Thermocouple
Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
GRILL RETURN AIR 6X12IN BRN   FURN PIPE GALV 6INX60IN STD GA Plumb Pak PP855-100 Pipe Thread Seal Tape
Heavy gauge steel construction. Individually-assembled strong steel bars, extremely rigid, smooth, firm surface. Painted metal grilles have a durable powder-coat finish. Used to distribute warm and cold air. For use on plumbing threads to prevent leaking.
Lambro 306 Flexible Duct Pipe Harvey's 018130-12 P-4 GRILL RETURN AIR 8X10IN BRN
Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Heavy gauge steel construction. Individually-assembled strong steel bars, extremely rigid, smooth, firm surface. Painted metal grilles have a durable powder-coat finish.
Anderson 738116-16 Street Pipe Elbow GRILL RETURN AIR 6X14IN BRN   Harvey's 018230-12 P-12
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Heavy gauge steel construction. Individually-assembled strong steel bars, extremely rigid, smooth, firm surface. Painted metal grilles have a durable powder-coat finish. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Anderson Metal 736140-0604 Brass Pipe Fitting Lambro 308 Flexible Duct Pipe Anderson Metal 738106-161612 Brass Pipe Fitting
One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Semi-rigid flexible duct. Non-combustible with a maximum operating temperature of 400?F. Without clamps. Anderson Pipe Reducing Tee, 1 x 1 x 3/4 in Nominal Size, IPT, Brass
Harvey's 018030-12 Mp-6 GRILL RETURN AIR 8X14IN BRN   Anderson Metal 738110-0602 Brass Pipe Hex Bushing
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Heavy gauge steel construction. Individually-assembled strong steel bars, extremely rigid, smooth, firm surface. Painted metal grilles have a durable powder-coat finish. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0402 Brass Pipe Hex Bushing Anderson Metal 738110-0604 Brass Pipe Fitting Oatey 32162 Hot Blue Lava PVC Cement
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564.
Oatey 31105 PVC Cement Oatey 30894 Rain-R-Shine RGSTR FLR 2-1/4X12 ORNTL ORB
Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. 1.5mm stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish.
RGSTR FLR 2-1/4X12 ORNTL SNKL Oatey 31008 PVC Cement Anderson Metal 736140-0806 Brass Pipe Fitting
1.5mm stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
REGISTER FLR 4X10IN ORNTL ORB REGISTER FLR 4X10IN ORNTL SNKL REGISTER FLR 4 X 10IN ORB VINE
1.5mm stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish. 1.5mm stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish. Stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish. 1.5MM.
REGISTER FLR 4X10IN SNKL VINE REGISTER FLR 4X10 SNKL ARTDECO Harvey's 018430-12 PVC Cement
Stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish. 1.5MM. Stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes. Easy-to-operate, rust proof, damper control. Durable decorative finish. 1.5mm. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 31122 PVC Cement Oatey 32167 Hot Orange Lava Oatey 30847 All-Purpose Cement
Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
Anderson Metal 736140-1208 Brass Pipe 3/4 x 1/2 In Nominal REGISTER FLR 4X12IN ORNTL ORB REGISTER FLR 4X12IN ORNTL SNKL
One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. 1.5mm stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish. 1.5mm stamped steel plated. Crafted for beauty and durability. Designed to complement the most popular floor finishes.  Easy-to-operate, rust proof, damper control. Durable decorative finish.
REGISTER FLR 4 X 12IN ORB VINE REGISTER FLR 4X12IN SNKL VINE