Home > HEATING & COOLING > HEAT & AIR CONDITIONING > REGISTERS & DEFLECTORS > WALL REGISTERS
Choose a sub category:
CORRUGATED SS TUBING-PROFLEX CORRUGATED SS TUBING-PROFLEX PIPE CEMENTS
PIPE CEMENTS BRASS FITTINGS/ACCESSO-PROFLEX BRASS FITTINGS/ACCESSO-PROFLEX
PIPE CLEANERS & PRIMERS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT COMPOUNDS THREAD SEALANT TAPES THREAD SEALANT TAPES
GAS LEAK DETECTORS GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBERS PUTTY PLUMBING EPOXYS PLUMBING EPOXYS
Sort By:
1
Anderson 736113-0224 Pipe Nipple Harvey's 023015-48 Pipe Joint Compound Anderson 736112-02 Pipe Nipple
Anderson Pipe Nipple, Series: 736113-0224, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Anderson Pipe Nipple, Series: 736112-02, 1/8 in Nominal, NPT End, Close Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Harvey 030005-144 Pipe Thread Compound Anderson 736113-0232 Pipe Nipple Anderson 38300-0215 Pipe Nipple
Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. Anderson Pipe Nipple, Series: 736113-0232, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0215, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 736112-06 Pipe Nipple Anderson 736113-0424 Pipe Nipple Anderson 38300-0220 Pipe Nipple
Anderson Pipe Nipple, Series: 736112-06, 3/8 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0424, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0220, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 31229 Great White Anderson 736113-0432 Pipe Nipple Anderson 38300-0415 Pipe Nipple
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Pipe Nipple, Series: 736113-0432, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0415, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0225 Pipe Nipple Anderson 38300-0815 Pipe Nipple Anderson 736113-0240 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0225, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0815, 1/2 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0240, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
GRILL RETURN AIR 12X6IN WHT   Anderson 38300-0615 Pipe Nipple Anderson 38300-0230 Pipe Nipple
High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Anderson Pipe Nipple, Series: 38300-0615, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0230, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 756100-02 Pipe Elbow Anderson 38300-0420 Pipe Nipple Anderson 736113-0624 Pipe Nipple
Anderson Pipe Elbow, Series: 756100-02, 1/8 in Nominal, FIP End, 90 deg, 1000 psi Working, Brass, Yellow, 250 deg F, Federal Public Law 111-380 Anderson Pipe Nipple, Series: 38300-0420, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0624, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson 38300-0235 Pipe Nipple Anderson 738100-04 Pipe Elbow Anderson 738100-06 Pipe Elbow
Anderson Pipe Nipple, Series: 38300-0235, 1/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Elbow, Series: 738100-04, 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738100-06, 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 738100-02 Pipe Elbow Anderson 38300-0820 Pipe Nipple Harvey's 029035 Pipe Thread Compound
Anderson Pipe Elbow, Series: 738100-02, 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Nipple, Series: 38300-0820, 1/2 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle.
Anderson 38300-0425 Pipe Nipple Anderson 736113-0440 Pipe Nipple Anderson 736113-0632 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0425, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0440, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0632, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Rectorseal 23710 T-Plus 2 Pipe Thread Sealant KBI DF-0750-T Chemical Resistant Drum Faucet Anderson 736113-0248 Pipe Nipple
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. 3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. Anderson Pipe Nipple, Series: 736113-0248, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson 756123-0806 Reducing Pipe Nipple Anderson 38300-0620 Pipe Nipple Anderson Metal 756101-02 Brass Pipe Tee
F123 1/2" x 3/8" Reducing Hex Red Brass Nipple Anderson Pipe Nipple, Series: 38300-0620, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2  turns past finger tight. Female pipe three ends.
Plumb Pak PP854-2 Pipe Joint Compound Anderson 38300-0240 Pipe Nipple Anderson 756122-08 Hex Pipe Nipple
Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Anderson Pipe Nipple, Series: 38300-0240, 1/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines UPC individually bagged.
Anderson 738107-06 Pipe Elbow Anderson 738107-02 Pipe Elbow Anderson 738107-04 Pipe Elbow
Anderson Pipe Elbow, Series: 738107-06, 3/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-02, 1/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-04, 1/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 38300-1215 Pipe Nipple GRILL RETURN AIR 12X6IN WHT   BREAKER VACUUM BRASS 3/4INCH
Anderson Pipe Nipple, Series: 38300-1215, 3/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines High-density polystyrene construction. Rust proof and scratch resistant. Rounded corners for safety. SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building
Anderson 38300-0625 Pipe Nipple Anderson 38300-0430 Pipe Nipple Anderson 38300-0825 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0625, 3/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0430, 1/4 in Nominal, MNPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0825, 1/2 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Rectorseal 25790 Pipe Thread Sealant Mintcraft 1RA1004 Return Air Grille Anderson 38300-0435 Pipe Nipple
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. With two piece screws. Anderson Pipe Nipple, Series: 38300-0435, 1/4 in Nominal, MNPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
REGISTER SIDEWALL 10X4IN WHT  B&K 108-904RP Backflow Preventer Vacuum Breaker Anderson 736113-0448 Pipe Nipple
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. Anderson Pipe Nipple, Series: 736113-0448, 1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Anderson 38300-0250 Pipe Nipple Anderson 38300-1220 Pipe Nipple Anderson 736112-12 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0250, 1/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1220, 3/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736112-12, 3/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
GRILL RETURN AIR 18X6IN WHT   Oatey 31230 Great White Anderson 38300-0630 Pipe Nipple
High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Pipe Nipple, Series: 38300-0630, 3/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson Metal 738101-06 Brass Pipe Fitting Anderson Metal 738101-04 Brass Pipe Fitting Anderson 38300-0830 Pipe Nipple
Anderson Pipe Tee, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Tee, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Nipple, Series: 38300-0830, 1/2 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
GRILL RETURN AIR 14X8IN WHT   Anderson 738107-08 Pipe Elbow REGISTER SIDEWALL 10X6IN WHT
High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Anderson Pipe Elbow, Series: 738107-08, 1/2 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Brass Craft PS1087 Seal 'N Check Kit Anderson 38300-0440 Pipe Nipple REGISTER SIDEWALL 14X6IN WHT
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Anderson Pipe Nipple, Series: 38300-0440, 1/4 in Nominal, NPT End, 4 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Anderson 38300-0635 Pipe Nipple Anderson 738100-08 Pipe Elbow REGISTER SIDEWALL WHT 12X4IN
Anderson Pipe Nipple, Series: 38300-0635, 3/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Elbow, Series: 738100-08, 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Anderson 38300-0260 Pipe Nipple Anderson Metal 750065-05 Brass Compression Elbow Anderson 38300-1225 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0260, 1/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines UPC individually bagged. Anderson Pipe Nipple, Series: 38300-1225, 3/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Plumb Pak PP854-1 Pipe Thread Sealant Anderson 38300-16 Pipe Nipple Mintcraft 1RA1206 Return Air Grille
Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing Anderson Pipe Nipple, Series: 38300-16, 1 in Nominal, NPT End, CLOSE in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines With two piece screws.
Mintcraft 1RA1006 Return Air Grille Anderson 38300-0835 Pipe Nipple Brass Craft CSSTNN-16N Gas Appliance Connectors
With two piece screws. Anderson Pipe Nipple, Series: 38300-0835, 1/2 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Harvey's 023030 Pipe Joint Compound Harvey's 025020 Pipe Thread Compound REGISTER SIDEWALL WHT 12X6IN
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Anderson 38300-0445 Pipe Nipple Mintcraft 1RA1406 Return Air Grille Anderson 756122-12 Hex Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0445, 1/4 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines With two piece screws. UPC individually bagged.
GRILL RETURN AIR 12X6IN WHT   Anderson 50869-0402 Tube Elbow Anderson 38300-0640 Pipe Nipple
One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. UPC individually bagged. Anderson Pipe Nipple, Series: 38300-0640, 3/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0450 Pipe Nipple Anderson Metal 738101-08 Brass Pipe Fitting Anderson 38300-1230 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0450, 1/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Tee, 1/2 in Nominal Size, FPT, Brass Anderson Pipe Nipple, Series: 38300-1230, 3/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
GRILL RETURN AIR 14X6IN WHT   Anderson 38300-0840 Pipe Nipple B&K 108-904 Silcock Vacuum Breaker
One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. Anderson Pipe Nipple, Series: 38300-0840, 1/2 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
Brass Craft CSSTNN-22N Gas Appliance Connectors Mintcraft BBRA12X6 Baseboard Register Anderson 38300-1620 Pipe Nipple
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Mintcraft Baseboard Register, 6 in Duct Height, 12 in Duct Width, 1/3 in Blade Spacing, Stamped Steel, White, Painted Anderson Pipe Nipple, Series: 38300-1620, 1 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Brass Craft CSSTNN-28N Gas Appliance Connectors Anderson 38300-0845 Pipe Nipple Anderson 38300-1235 Pipe Nipple
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Anderson Pipe Nipple, Series: 38300-0845, 1/2 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1235, 3/4 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Mintcraft SW03-10X4 3-Way Sidewall Register Mintcraft SW02-8X4 2-Way Sidewall Register Rectorseal 31631 Tru-Blu
Mintcraft Sidewall Register, 3-Way, 4 in Duct Height, 10 in Duct Width, Steel, White Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 8 in Duct Width, Steel, White Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732.
Rectorseal 23631 T-Plus 2 Harvey's 029048 Pipe Thread Compound Anderson 38300-0650 Pipe Nipple
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Anderson Pipe Nipple, Series: 38300-0650, 3/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 738100-12 Pipe Elbow Oatey 15420 Pro Dope Mintcraft SW02-10X4 2-Way Sidewall Register
Anderson Pipe Elbow, Series: 738100-12, 3/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 10 in Duct Width, White
Anderson 738124-08 Street Pipe Elbow Rectorseal 25631 Pipe Thread Sealant Anderson 38300-0460 Pipe Nipple
Anderson Street Pipe Elbow, Series: 738124-08, 1/2 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Anderson Pipe Nipple, Series: 38300-0460, 1/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 15804 Hercules Pipe Thread Sealant Anderson 738107-12 Pipe Elbow Anderson 38300-0850 Pipe Nipple
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Anderson Pipe Elbow, Series: 738107-12, 3/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Nipple, Series: 38300-0850, 1/2 in Nominal, NPT End, 5 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Mintcraft BBRA14X6 Baseboard Register B&K 109-204 Self-Closing Drum and Barrel Faucet Anderson 38300-1625 Pipe Nipple
Mintcraft Baseboard Register, 6 in Duct Height, 14 in Duct Width, White Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01. Anderson Pipe Nipple, Series: 38300-1625, 1 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Mintcraft SW03-12X4 3-Way Sidewall Register Anderson 38300-1240 Pipe Nipple Camco 9293 Thermocouple
Mintcraft Sidewall Register, 3-Way, 4 in Duct Height, 12 in Duct Width, White Anderson Pipe Nipple, Series: 38300-1240, 3/4 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines With positioning adapters, fit RV gas water heaters and furnaces.
Camco 9273 Thermocouple Anderson 38300-0855 Pipe Nipple Anderson 38300-0660 Pipe Nipple
With positioning adapters, fit RV gas water heaters and furnaces. Anderson Pipe Nipple, Series: 38300-0855, 1/2 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0660, 3/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Mintcraft SW02-12X4 2-Way Sidewall Register Mintcraft 1RA1212 Return Air Grille Anderson 738124-12 Street Pipe Elbow
Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 12 in Duct Width, 1/2 in Blade Spacing, Fasteners: Screw, Stamped Steel, White, Painted With two piece screws. Anderson Street Pipe Elbow, Series: 738124-12, 3/4 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 38300-1250 Pipe Nipple Harvey's 023045 Pipe Joint Compound REGISTER BASEBOARD 10X6IN WHT
Anderson Pipe Nipple, Series: 38300-1250, 3/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish.
REGISTER SIDEWALL 24X6IN WHT  Anderson 38300-1245 Pipe Nipple Harvey's 025050 Pipe Thread Compound
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Anderson Pipe Nipple, Series: 38300-1245, 3/4 in Nominal, NPT End, 4-1/2 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle.
Anderson Metal 738101-12 Brass Pipe Fittings REGISTER SIDEWALL 12X12IN WHT Mintcraft SW02-10X6 2-Way Sidewall Register
Anderson Pipe Tee, 3/4 in Nominal Size, FPT, Brass One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Mintcraft Sidewall Register, 2-Way, 6 in Duct Height, 10 in Duct Width, 1/2 in Blade Spacing, Steel, White
Honeywell CQ100A Thermocouple Mintcraft SW03-10X6 3-Way Sidewall Register Arrowhead Brass PK1430 Air Vent Assembly Kit
Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. Mintcraft Sidewall Register, 3-Way, 6 in Duct Height, 10 in Duct Width, Steel, White, For Sidewall or Ceiling Applications Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series.
Anderson 38300-1630 Pipe Nipple Anderson 38300-1260 Pipe Nipple Anderson 38300-0860 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-1630, 1 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1260, 3/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0860, 1/2 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Brass Craft CSSTNN-34N Gas Appliance Connectors Anderson 38300-1255 Pipe Nipple BrassCraftCSSLNN-10NGasApplianceConnectors
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Anderson Pipe Nipple, Series: 38300-1255, 3/4 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-12 Gas Appliance Connectors Honeywell CQ100A Thermocouple Brass Craft CSSD54-12 Gas Appliance Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
REGISTER SIDEWALL 30X6IN WHT  Mintcraft SW02-12X6 2-Way Sidewall Register Anderson 38300-2020 Pipe Nipple
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Mintcraft Sidewall Register, 2-Way, 6 in Duct Height, 12 in Duct Width, White Anderson Pipe Nipple, Series: 38300-2020, 1-1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Mintcraft SW03-12X6 3-Way Sidewall Register REGISTER SIDEWALL 14X12IN WHT Oatey 15427 Pro Dope
Mintcraft Sidewall Register, 3-Way, 6 in Duct Height, 12 in Duct Width, White One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Brass Craft CSSLNN-16N Gas Appliance Connector BrassCraftCSSCNN-22NGasApplianceConnectors REGISTER SIDEWALL WHT 10X4IN
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish.
BrassCraftCSSLNN-22NGasApplianceConnectors BrassCraftCSSLNN-28NGasApplianceConnectors Anderson 38300-1635 Pipe Nipple
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Anderson Pipe Nipple, Series: 38300-1635, 1 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 15806 Hercules Pipe Thread Sealant Rectorseal 25551 Pipe Thread Sealant Brass Craft CSSLNN-34N Gas Appliance Connector
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
REGISTER SIDEWALL 8X4IN WHT   Anderson Metal 738104-04 Brass Pipe Union Anderson Metal 738104-06 Brass Pipe Union
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Anderson Pipe Union, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Union, 3/8 in Nominal Size, FPT, Brass
Anderson Metal 738104-02 Brass Pipe Fitting Anderson 738100-16 Pipe Elbow Rectorseal 23551 T-Plus 2 Pipe Thread Sealant
Anderson Pipe Union, 1/8 in Nominal Size, FPT, Brass Anderson Pipe Elbow, Series: 738100-16, 1 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Mintcraft BB-15W Baseboard Register Simmons 8842 Hydrant Plunger REGISTER SIDEWALL 10X6IN WHT
Mintcraft Baseboard Register, Heavy Duty, 4-1/2 in Duct Height, 15 in Duct Width, Steel, White Replacement plunger for Simmons 800 series lead free, deluxe frost-proof yard hydrants. Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish.
Brass Craft CSSTNN-46N Gas Appliance Connectors Anderson 38300-1640 Pipe Nipple Anderson 38300-2030 Pipe Nipple
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Anderson Pipe Nipple, Series: 38300-1640, 1 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-2030, 1-1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
REGISTER SIDEWALL 12X4IN WHT  Mintcraft BB10X6W Baseboard Register REGISTER SIDEWALL 12X6IN WHT
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Mintcraft Baseboard Register, 6 in Duct Height, 10 in Duct Width, White Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish.
Anderson Metal 738104-08 Brass Pipe Union GRILL RETURN AIR 30X6IN WHT   B and K Industries G014SS101118RP Gas Connectors
Anderson Pipe Union, 1/2 in Nominal Size, FPT, Brass One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature.
Brass Craft CSSL54-18 Gas Appliance Connectors Brass Craft CSSNN-28N Gas Appliance Connector Honeywell CQ100A Thermocouple
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings.
Brass Craft CSSC21-24 Gas Appliance Connectors Brass Craft CSSL54-36 Gas Appliance Connectors Brass Craft CSSL54-24 Gas Appliance Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSCNN-16N Gas Appliance Connector Honeywell CQ100A Thermocouple Brass Craft CSSD54-18 Gas Appliance Connectors
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Replacement for D-I-Y and professional. For gas furnaces and 30 millivolt systems. Heavy, long-lasting element. Universal adapter fits screw-in, clamp-in and push-in type pilot burners. Positive positioning for quick insertion. Includes adapter fittings. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSD54-24 Gas Appliance Connectors Mintcraft BB-18W Baseboard Register REGISTER BASEBOARD 15IN WHT
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Mintcraft Baseboard Register, 4-1/2 in Duct Height, 18 in Duct Width, 1/3 in Blade Spacing, Steel, White, Painted All-steel construction. Fan shaped sunburst pattern spreads air over wide area, 2 1/2" base extension. Snap-in face removes for easy installation and cleaning. Single-valve volume control damper. Durable powder-coat painted finish.
Brass Craft CSSC21-18 Gas Appliance Connectors Anderson 736112-04 Pipe Nipple Brass Craft CSSD54-24P Procoat
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Anderson Pipe Nipple, Series: 736112-04, 1/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor.
Anderson Metal 738101-16 Brass Pipe Fitting Brass Craft CSSD54-30 Gas Appliance Connectors Brass Craft CSSL54-30 Gas Appliance Connectors
Anderson Pipe Tee, 1 in Nominal Size, FPT, Brass ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Anderson 738100-20 Pipe Elbow Anderson Metal 738104-12 Brass Pipe Fittings Brass Craft CSSTNN-58N Gas Appliance Connectors
Anderson Pipe Elbow, Series: 738100-20, 1-1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Union, 3/4 in Nominal Size, FPT, Brass Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-36P Procoat Gas Dryer Connectors REGISTER BASEBOARD 18IN WHT   Brass Craft CSSC21-30 Gas Appliance Connector
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. All-steel construction. Fan shaped sunburst pattern spreads air over wide area, 2 1/2" base extension. Snap-in face removes for easy installation and cleaning. Single-valve volume control damper. Durable powder-coat painted finish. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSC21-36 Gas Appliance Connectors Brass Craft CSSD54-36 Gas Appliance Connectors Brass Craft CSSLNN-46N Gas Appliance Connector