Home > HEATING & COOLING > HEAT & AIR CONDITIONING > REGISTERS & DEFLECTORS
Choose a sub category:
CORRUGATED FLEXIBLE GAS SUPPLY CORRUGATED FLEXIBLE GAS SUPPLY DEFLECTORS
FLEXIBLE STAINLESS GAS SUPPLY FLEXIBLE STAINLESS GAS SUPPLY WALL REGISTERS
FLEXIBLE GAS PIPING SYSTEM FLEXIBLE GAS PIPING SYSTEM FLOOR REGISTERS
Sort By:
1
Anderson Metal 756103-02 Brass Pipe Coupling World Wide Sourcing PMB-042 Sillcock Handle Anderson Metal 756108-02 Brass Pipe Cap
AMC Pipe Coupling, Barstock, 1/8 in Nominal Size, Threaded, Brass WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Danco 80416 Square Broach Valve Wheel Handle Danco 80417 Round Broach Valve Wheel Handle Anderson Metal 756103-04 Brass Pipe Coupling
Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel AMC Pipe Coupling, Barstock, 1/4 in Nominal Size, Threaded, Brass
FAUCET HANDLE WHEEL ROUND 12PT Anderson Metal 756108-04 Brass Pipe Cap Mintcraft PMB-5053L Sillcock Keys
Metal construction. 12pt. round broach. Metallic finish. Designed to fit hose bibb faucets, stopcocks and valves. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Sillcock key for 1/4" stem. For use on outside water faucets.
Plumb Pak PP28601 Square Stem Wheel Sillcock Faucet Handle Anderson Metal 756108-06 Brass Pipe Cap Anderson Metal 738108-04 Brass Pipe Cap
Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738108-02 Brass Pipe Cap Anderson Metal 738108-06 Brass Pipe Cap Frost King HD5 Heat Deflector
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. For central forced air systems. Multi-purpose, improves heating and cooling. Heavy duty, clear plastic, magnetic hold. 10" to 14" economy heat and air deflector. In winter the curved magnetized deflector directs warm air down for improved heating, in summer turn it to direct air conditioned air up for improved cooling.
Anderson Metal 750097-0604 Brass Flare  Adapter Plumb Pak PP806-1 Sillcock Faucet Wheel Handle Anderson 750066-0606 3-Piece Tubing Coupling
Anderson Tube Adapter, 1/4 x 3/8 in Nominal Size, Compression, Brass Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Plumb Pak PP806-11 Sillcock Faucet Handle Anderson 750066-0302 3-Piece Reducing Tubing Coupling GRILL RETURN AIR 2.25X12IN WHT
12 point Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. All-steel construction. Widespread air diffusion. May be used as outlet or inlet. Durable powder-coat painted finish. Mounting holes at each end.
GRILL RETURN AIR 4X10IN WHT   SILLCOCK KEY 5/16IN           Anderson Metal 756103-06 Brass Pipe Coupling
SILLCOCK KEY 5/16IN
Our Price: $3.39
All-steel construction. Widespread air diffusion. May be used as outlet or inlet. Durable powder-coat painted finish. Mounting holes at each end. Used to open and close sillcocks or spigots. This key will fit 5/16 inch valves. Constructed of metal to provide strength and durability. AMC Pipe Coupling, Barstock, 3/8 in Nominal Size, Threaded, Brass
GRILL RETURN AIR 12X6IN WHT   Anderson 756100-02 Pipe Elbow Plumb Pak PP806-10 Sillcock Faucet Handle
High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Anderson Pipe Elbow, Series: 756100-02, 1/8 in Nominal, FIP End, 90 deg, 1000 psi Working, Brass, Yellow, 250 deg F, Federal Public Law 111-380 16 point
Anderson Metal 738108-08 Brass Pipe Fittings Anderson Metal 738103-04 Brass Pipe Fitting Anderson 738100-04 Pipe Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. AMC Pipe Coupling, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Elbow, Series: 738100-04, 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 738100-06 Pipe Elbow Anderson Metal 738103-06 Brass Pipe Coupling Anderson 738100-02 Pipe Elbow
Anderson Pipe Elbow, Series: 738100-06, 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water AMC Pipe Coupling, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Elbow, Series: 738100-02, 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson Metal 738103-02 Brass Pipe Coupling Oatey 30999 ABS Cement Oatey 31012 PVC Cement
AMC Pipe Coupling, 1/8 in Nominal Size, FPT, Brass Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
KBI HBF-0500-T Washerless Sillcock and Angle Lawn Faucet REGISTER PLASTIC 4 X 10IN ALM Frost King HD7 Unbreakable Air Deflector
Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. Adjust from 10" to 14". Heavy duty, magnetic hold, and unbreakable plastic. During the winter, the curved air deflector directs warm air down for improved heating. In the summer point the vents up to direct the air conditioning towards the ceiling for improved cooling.
REGISTER FLOOR WHT 2-1/4X12IN REGISTER FLOOR 2-1/4X12IN BRN REGISTER FLOOR 4X10IN WHT
High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation.
KBI HBF-0750-T Washerless Sillcock and Angle Lawn Faucet Harvey's 018100-24 P-4 Oatey 30890 Rain-R-Shine
Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit.
Anderson 738107-06 Pipe Elbow Anderson 738107-02 Pipe Elbow Anderson 738107-04 Pipe Elbow
Anderson Pipe Elbow, Series: 738107-06, 3/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-02, 1/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-04, 1/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
GRILL RETURN AIR 12X6IN WHT   Oatey 30883 PVC Cement Harvey's 018400-24 PVC Cement
High-density polystyrene construction. Rust proof and scratch resistant. Rounded corners for safety. Medium-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature 40-110 degrees. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can.
Oatey 31128 CPVC Pipe and Fitting Cement REGISTER FLOOR 4X12IN WHT     REGISTER PLASTIC 4 X 12IN ALM
Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation. High-impact polystyrene construction. Rust proof and scratch resistant. Three position 100% damper shut-off. Dishwasher safe. Knockout at each end for ceiling installation.
Flair-It 16050 Flexpex Pex Tubing Anderson Metal 738103-08 Brass Pipe Fittings Harvey's 018450-24 P-6E
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. AMC Pipe Coupling, 1/2 in Nominal Size, FPT, Brass For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set; designed for use on all duct and conduit applications through 6" in diameter. Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified for use in potable water, sewer, drain, and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can.
Mintcraft 1RA1004 Return Air Grille Plumb Pak PP806-15 Tee Valve Faucet Handle Flair-It 16051 Flexpex
With two piece screws. Plumb Pak Tee Valve Faucet Handle, Suitable For Use With: Lawn Faucet or Valves, 12/16 Point Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
Frost King MC815/3 Magnetic Ventilation Cover Oatey 30818 All-Purpose Cement Harvey's 018500-24 A-6
Flexible sheet seals metal register vents to help improve heating or cooling efficiency. Can be painted, stenciled or wall papered to match decor. Easily cut to fit vent size. Size: 8"W x 15"L. 3-Pack. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
REGISTER SIDEWALL 10X4IN WHT  Anderson Metal 738108-12 Brass Pipe Fitting Oatey 30850 PVC Cement
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed.
Plumb Pak PP874-00PC Shut Off Key GRILL RETURN AIR 18X6IN WHT   Rectorseal 55902 PVC Cement
Key for loose key stops. Tamper proof. High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers, and drain, waste and vent (DWV). For use on PVC pipe through 2" Schedule 40 pressure piping and up to and including 4" Schedule 40 non-pressure (DWV) piping; it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top.
Harvey's 018110-24 P-4 Harvey's 018700-24 C-4 Harvey's 018200-24 P-2 PVC Cement
Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Oatey 31129 CPVC Pipe and Fitting Cement REGISTER FLOOR 2-1/4X10IN WHT REGISTER FLOOR 2-1/4X10IN BRN
Medium-bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 degrees Fahrenheit optimum temperature. For use on smallest diameter through 6" diameters. Particularly suited to hot water pipe applications up to 200 degrees. Meets ASTM-F-493. NSF, UPC and IAPMO listed. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
REGISTER FLOOR 4X10IN BRN     Harvey's 018000-24 Mp-6 Anderson Metal 750097-0806 Brass Adapter
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Anderson Tube Adapter, 1/2 x 3/8 in Nominal Size, Compression, Brass
GRILL RETURN AIR 14X8IN WHT   Anderson 738107-08 Pipe Elbow REGISTER SIDEWALL 10X6IN WHT
High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Anderson Pipe Elbow, Series: 738107-08, 1/2 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Oatey 30917 ABS Cement REGISTER FLOOR 4X10IN WHT     Oatey 31013 PVC Cement
Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings up to 6" in diameter. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. SALES AREA - ONLY IN THE WESTERN REGION. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
Anderson 750066-0406 3-Piece Tubing Coupling REGISTER SIDEWALL 14X6IN WHT  Anderson 738100-08 Pipe Elbow
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Anderson Pipe Elbow, Series: 738100-08, 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
REGISTER SIDEWALL WHT 12X4IN  Anderson Metal 750065-05 Brass Compression Elbow REGISTER FLOOR 2-1/4X10IN BRN
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. UPC individually bagged. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
REGISTER FLOOR 2-1/4X12IN WHT REGISTER CEILING WHITE 4X10IN REGISTER CEILING 3X10IN WHITE
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion, damper control, rolled fin for strength and safety. Painted metal grill have a durable powder-coat painted finish. Mounting holes at each end, screws included. All-steel construction. Widespread air diffusion, damper control, rolled fin for strength and safety. Painted metal grill have a durable powder-coat painted finish. Mounting holes at each end, screws included.
Mintcraft 1RA1206 Return Air Grille Mintcraft 1RA1006 Return Air Grille Oatey 31910 Flow-Guard Gold
With two piece screws. With two piece screws. Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Arrowhead PK1250 Sillcock Wheel Handle B&K Proline Economy Sillcock Valve REGISTER SIDEWALL WHT 12X6IN
Green wheel handle and stainless steel screw. Fits all models. 3/4 hose thread outlet. Six-point cast-iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Mintcraft FR01-2X10B Floor Register Mintcraft FR01-2X10W Floor Register Mintcraft FR01-2X12W Floor Register
Mintcraft Floor Register, 2 in Duct Height, 10 in Duct Width, 3-7/8 in Overall Length, 9-5/8 in Overall Width, Metal, Brown Mintcraft Floor Register, 2 in Duct Height, 10 in Duct Width, Steel, White Mintcraft Floor Register, 2 in Duct Height, 12 in Duct Width, Steel, White
Mintcraft FR01-2X12B Floor Register Anderson Metal 738103-12 Brass Pipe Fittings Mintcraft 1RA1406 Return Air Grille
Mintcraft Floor Register, 2 in Duct Height, 12 in Duct Width, Steel, Brown AMC Pipe Coupling, 3/4 in Nominal Size, FPT, Brass With two piece screws.
Danco 10006 Faucet Handle with Adapter GRILL RETURN AIR 12X6IN WHT   Anderson 50869-0402 Tube Elbow
Fits all outdoor faucets. Larger, ergonomic handle is easier to turn on/off. Durable construction (heavier gauge zinc). Includes universal adapter and screws. One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. UPC individually bagged.
Oatey 30900 ABS/PVC Transition Cement REGISTER FLOOR 4X8IN WHT      REGISTER FLOOR 4X8IN BRN
Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
REGISTER FLOOR 4X12IN BRN     Rectorseal 55970 Abs/PVC/CPVC Cement Harvey's 018510-24 A-6
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Medium body multipurpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2" Schedule 40 and non-pressure piping systems through 6" Schedule 40 (excluding Schedule 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. Medium bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings: Schedule 40, Types I & II, up to 6". Apply at temperatures 40 degrees to 110 degrees fahrenheit. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
REGISTER FLOOR 4X12IN WHT     Harvey's 018410-24 PVC Cement Harvey's 018210-24 P-12
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
REGISTER POP-UP 4X10IN WHT    Arrowhead PK1290 Oval Sillcock Wheel Handle Mintcraft FR01-2X14W Floor Register
High-impact polystyrene construction. Rust proof and scratch resistant. Use as conventional register when closed. Use as air deflector when open. Knockout at each end for ceiling installation. Green wheel handle and stainless steel screw. Fits all models. Mintcraft Floor Register, 2 in Duct Height, 14 in Duct Width, White
Mintcraft FR01-2X14B Square Floor Register GRILL RETURN AIR 14X6IN WHT   REGISTER FLOOR 2-1/4X14IN WHT
Mintcraft Floor Register, Square, 2 in Duct Height, 14 in Duct Width, 4 in Overall Length, 13-3/8 in Overall Width, Steel, Brown, Enamel, 17 sq-in Free Area One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
B&K Proline Economy Sillcock Valve Mintcraft FR01-4X10B Floor Register Mintcraft FR01-4X10W Floor Register
3/4 hose thread outlet. Six-point cast-iron handle, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. Mintcraft Floor Register, 4 in Duct Height, 10 in Duct Width, Steel, Brown Mintcraft Floor Register, 4 in Duct Height, 10 in Duct Width, Steel, White
Oatey 30821 All-Purpose Cement REGISTER FLOOR 2-1/4X14IN BRN Mintcraft BBRA12X6 Baseboard Register
Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Mintcraft Baseboard Register, 6 in Duct Height, 12 in Duct Width, 1/3 in Blade Spacing, Stamped Steel, White, Painted
Oatey 31911 Flow-Guard Gold Arrowhead Brass PK1300 Loose Key Handle Oatey 30891 Rain-R-Shine
Medium-bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit only and systems up to 180 degrees Fahrenheit. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493. Loose key handle. Fits all models. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit.
Flair-It 16052 Flexpex Pex Tubing Harvey's 018710-24 C-4 CPVC Cement REGISTER FLOOR 2-1/4X12IN BRN
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Oatey 32161 Hot Blue Lava PVC Cement Mintcraft SW03-10X4 3-Way Sidewall Register Mintcraft SW02-8X4 2-Way Sidewall Register
Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit. Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. Very fast-setting hot cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for potable water, sewer and DWV applications. Recommended application temperature 40 Deg F to 110 Deg F. No primer needed on non-pressure DWV, where local codes permit. Meets ASTM D2564. Mintcraft Sidewall Register, 3-Way, 4 in Duct Height, 10 in Duct Width, Steel, White Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 8 in Duct Width, Steel, White
Anderson 738100-12 Pipe Elbow Harvey's 018010-24 Mp-6 Mintcraft SW02-10X4 2-Way Sidewall Register
Anderson Pipe Elbow, Series: 738100-12, 3/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can. Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 10 in Duct Width, White
Anderson Metal 738108-16 Brass Pipe Cap B&K Proline Quarter Master 1/4 Turn Sillcock Valve Anderson 738107-12 Pipe Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Anderson Pipe Elbow, Series: 738107-12, 3/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
B&K Proline Economy Solder Sillcock Valve With Coupling REGISTER POP-UP 4X12IN WHT    Mintcraft BBRA14X6 Baseboard Register
Six-point cast-iron handle, oversized notched flange, solder ends comply with ANSI B16.18, hose threads comply with ANSI B1.20.7, certified to NSF 61. 1/2" C inlet or 3/4" solder connection with 3/4" C x C coupling. High-impact polystyrene construction. Rust proof and scratch resistant. Use as conventional register when closed. Use as air deflector when open. Knockout at each end for ceiling installation. Mintcraft Baseboard Register, 6 in Duct Height, 14 in Duct Width, White
REGISTER FLOOR 4X12IN BRS     Harvey's 018120-12 P-4 B&K Proline Quarter Master 1/4 Turn Sillcock Valve
All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. Regular bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4". NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSF 61.9 Approved, complies to ASME A112.18.1. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification.
Harvey's 018220-12 P-2 PVC Cement Oatey 30863 PVC Cement Mintcraft SW03-12X4 3-Way Sidewall Register
Designed for use on PVC pressure pipe and fittings up to 12". Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer, and drain, waste and vent systems and should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Mintcraft Sidewall Register, 3-Way, 4 in Duct Height, 12 in Duct Width, White
Mintcraft FR01-4X12B Floor Register Mintcraft FR01-4X12W Floor Register Oatey 31094 PVC Cement
Mintcraft Floor Register, 4 in Duct Height, 12 in Duct Width, Steel, Brown Mintcraft Floor Register, 4 in Duct Height, 12 in Duct Width, Steel, White Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
REGISTER FLOOR 4X10IN BRN     Mintcraft SW02-12X4 2-Way Sidewall Register Mintcraft 1RA1212 Return Air Grille
All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish. Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 12 in Duct Width, 1/2 in Blade Spacing, Fasteners: Screw, Stamped Steel, White, Painted With two piece screws.
REGISTER BASEBOARD 10X6IN WHT REGISTER SIDEWALL 24X6IN WHT  REGISTER FLOOR 4X12IN BRN
All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Oatey 30925 ABS/PVC Transition Cement Anderson Metal 738103-16 Brass Pipe Fitting REGISTER SIDEWALL 12X12IN WHT
Medium-bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6" diameter in non-pressure transition joints. 40 to 110 degrees Fahrenheit recommended application temperature. Meets ASTM D-3138. AMC Pipe Coupling, 1 in Nominal Size, FPT, Brass One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Mintcraft SW02-10X6 2-Way Sidewall Register Oatey 31014 PVC Cement Mintcraft SW03-10X6 3-Way Sidewall Register
Mintcraft Sidewall Register, 2-Way, 6 in Duct Height, 10 in Duct Width, 1/2 in Blade Spacing, Steel, White Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564. Mintcraft Sidewall Register, 3-Way, 6 in Duct Height, 10 in Duct Width, Steel, White, For Sidewall or Ceiling Applications
Oatey 30812 Bonding Adhesive Mintcraft T1543L Sillcock Key REGISTER FLOOR 2-1/4X14IN BRN
X-15 PVC bonding adhesive is formulated for use to join two sheets of PVC shower pan liner membrane together. Provides permanent, watertight seal to form larger membrane for use in tile shower or other concealed water-proofing applications. Hardened steel. Designed to fit 1/4", 9/32", 5/16", and 11/32" square stem. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
Oatey 32166 Hot Orange Lava Mintcraft SRSD06 Round Ceiling Diffuser 6 in W REGISTER FLOOR 4X14IN WHT
Heavy-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6? diameter with interference fit. One-step, fast curing cement designed for cut-in applications where limited time is available for down-time.  Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements. For commercial hot and cold water systems up to 200 DegF. Recommended application temperature 40 Deg F to 110 Deg F. Approved for Flowguard Gold and Corzan CPVC piping systems. Meets ASTM F-493 and ASTM D-2846. White round ceiling diffuser, with 3 pcs screws. 1 pc /shrink with color label. All-steel construction. Widespread air diffusion. Easy to operate damper control. Rolled fin for strength and safety. Measure the length and width of the opening. Painted metal registers have a durable powder-coat finish.
REGISTER SIDEWALL 30X6IN WHT  B&K Proline Sillcock Valve With Lock Shield B&K Proline Sillcock Valve With Lock Shield
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. 3/4" threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. 3/4" threaded outlet. Lockshield prevents unwanted use of valve when handle is removed, oversized notched flange, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7.
Harvey's 018720-12 C-4 CPVC Cement Harvey's 018420-12 PVC Cement Mintcraft SW02-12X6 2-Way Sidewall Register
Regular bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings: Schedule 80 and Copper Tube Size, CPVC hot and cold water pipe and fittings up to 4" in diameter. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 degrees to 110 degrees fahrenheit. UPC listed. Meets ASTM F-493. Dauber can. Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 degrees to 110 degrees Fahrenheit. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Mintcraft Sidewall Register, 2-Way, 6 in Duct Height, 12 in Duct Width, White
Mintcraft SW03-12X6 3-Way Sidewall Register REGISTER SIDEWALL 14X12IN WHT Harvey's 018020-12 Mp-6
Mintcraft Sidewall Register, 3-Way, 6 in Duct Height, 12 in Duct Width, White One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC, and ABS pipe and fittings: Schedule 40 & 80, Types I & II, up to 6". For potable water, pressure pipe, conduit, drain waste, and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 degrees to 110 degrees Fahrenheit. Dauber can.
SILLCOCK FLANGE MULT-TRN 1/2IN REGISTER SIDEWALL WHT 10X4IN  Oatey 30834 All-Purpose Cement
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter. Recommended for pipe and fittings schedule 40 and schedule 80, potable water, pressure pipe, gas, conduit, and DWV. Recommended application temperature  40 degrees F to 110 degrees F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product.
REGISTER FLR LVRD 4 X 10IN ORB REGISTER FLR LVRD 4 X 12IN ORB REGISTER FLR 4IN X 10IN SNKL
All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish.
REGISTER FLR 4IN X 12IN SNKL  Oatey 30902 ABS Cement REGISTER SIDEWALL 8X4IN WHT
All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish. Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish.
Harvey's 018320-12 PVC Cement Anderson Metal 738104-04 Brass Pipe Union Anderson Metal 738104-06 Brass Pipe Union
Fast setting, all-weather, medium bodied PVC solvent cement specifically recommended for cold weather and fast setting pressure applications. Recommended for pressure pipe: Schedule 40 & 80 Types I & II, up to 6". NSF certified for use in potable water, sewer, drain, waste and vent systems. Formulated for fast initial set up at temperatures down to 10 degrees fahrenheit. Effective temperature range -15 degrees to 110 degrees fahrenheit. Meets performance requirements of ASTM D-2564. Dauber can. Anderson Pipe Union, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Union, 3/8 in Nominal Size, FPT, Brass
Anderson Metal 738104-02 Brass Pipe Fitting Oatey 30876 PVC Cement Anderson 738100-16 Pipe Elbow
Anderson Pipe Union, 1/8 in Nominal Size, FPT, Brass Heavy-bodied clear cement for PVC pipe and fittings. Up to 12" diameter for Schedule 40 and Schedule 80. Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 degrees Fahrenheit to 110 degrees Fahrenheit. Exceeds ASTM D-2564. NSF and UPC listed. Anderson Pipe Elbow, Series: 738100-16, 1 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Oatey 31121 PVC Cement SILLCOCK FLANGE MULT-TRN 3/4IN Mintcraft SRSD08 Round Ceiling Diffuser 8 in W
Very heavy-bodied medium-setting gray colored cement for use on PVC pipe and fittings. Up to 18" diameter for Sch. 40 and Sch. 80. Formulated for quick installation of irrigation pipe and fittings. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Builds up for large diameter installations. Fills gaps in large diameter pipe and loose fitting joints. Recommended application temperature 40 degrees F to 110 degrees F. Meets ASTM D-2564. White round ceiling diffuser, with 3 pcs screws. 1 pc /shrink with color label.
Mintcraft BB-15W Baseboard Register REGISTER SIDEWALL 10X6IN WHT  Oatey 31132 PVC Cement
Mintcraft Baseboard Register, Heavy Duty, 4-1/2 in Duct Height, 15 in Duct Width, Steel, White Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Medium-bodied clear cement for use on PVC pipe and fittings. Up to 6" diameter. Formulated for fast initial set-up at temperatures down to -15 degrees F to 100 degrees F. schedule 40 and schedule 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit, and DWV. Non-pressure, DWV, up through 4" diameter: no primer needed where local codes permit. Meets ASTM D-2564.
REGISTER SIDEWALL 12X4IN WHT  Oatey 30893 Rain-R-Shine Oatey 31095 PVC Cement
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Medium-bodied, fast-setting, colored cement recommended for PVC pipe and fittings up to 6" in diameter. Formulated for wet conditions and/or when quick pressurization and fast installation is needed. For Sch. 40 and Sch. 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 degrees Fahrenheit. Heavy duty gray cement for use on all schedules and classes PVC pipe and fittings up to 12" diameter with interference fit, up to 18" for non-pressure. Lo-V.O.C. solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. Thick formula fills gaps in large diameter pipe and loose fitting joints. Recommended for potable water, pressure pipe, conduit and DWV.
Mintcraft BB10X6W Baseboard Register REGISTER SIDEWALL 12X6IN WHT  Anderson Metal 738104-08 Brass Pipe Union
Mintcraft Baseboard Register, 6 in Duct Height, 10 in Duct Width, White Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Anderson Pipe Union, 1/2 in Nominal Size, FPT, Brass
GRILL RETURN AIR 30X6IN WHT   Anderson Metal 738103-20 Brass Pipe Coupling Oatey 31015 PVC Cement
One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. AMC Pipe Coupling, 1-1/4 in Nominal Size, FPT, Brass Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4" for SCH. 40 and up to 2"  for Sch. 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe.  Flows freely. Sets up quickly. Apply at temperature 40 to 110 degrees F.  NSF and UPC listed. Exceeds ASTM D-2564.
SILLCOCK 1/2IN F1960X3/4IN GHT GRILL RETURN AIR 6X12IN BRN   Harvey's 018130-12 P-4