Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > UTILITY HEATER PARTS & ACC
Sort By:
1
Anderson Metal 756103-02 Brass Pipe Coupling Anderson Metal 756110-0402 Brass Pipe Hex Bushing Anderson Metal 756110-0604 Brass Pipe Fittings
AMC Pipe Coupling, Barstock, 1/8 in Nominal Size, Threaded, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 756103-04 Brass Pipe Coupling Anderson Metal 756110-0602 Brass Pipe Hex Bushing Frost King HD5 Heat Deflector
AMC Pipe Coupling, Barstock, 1/4 in Nominal Size, Threaded, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. For central forced air systems. Multi-purpose, improves heating and cooling. Heavy duty, clear plastic, magnetic hold. 10" to 14" economy heat and air deflector. In winter the curved magnetized deflector directs warm air down for improved heating, in summer turn it to direct air conditioned air up for improved cooling.
Anderson Metal 738110-0806 Brass Pipe Fittings Anderson Metal 750097-0604 Brass Flare  Adapter Anderson 750066-0606 3-Piece Tubing Coupling
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Tube Adapter, 1/4 x 3/8 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson 750066-0302 3-Piece Reducing Tubing Coupling Anderson Metal 756103-06 Brass Pipe Coupling Anderson Metal 756110-0804 Brass Pipe Fitting
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. AMC Pipe Coupling, Barstock, 3/8 in Nominal Size, Threaded, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
GRILL RETURN AIR 12X6IN WHT   NDS SCP-0500-S Stop Valve NDS SCP-0750-S Stop Valve
High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
Anderson Metal 738103-04 Brass Pipe Fitting Anderson Metal 738103-06 Brass Pipe Coupling Anderson Metal 738103-02 Brass Pipe Coupling
AMC Pipe Coupling, 1/4 in Nominal Size, FPT, Brass AMC Pipe Coupling, 3/8 in Nominal Size, FPT, Brass AMC Pipe Coupling, 1/8 in Nominal Size, FPT, Brass
Anderson Metal 756110-0802 Brass Pipe Hex Bushing Frost King HD7 Unbreakable Air Deflector NDS SCL-0500-T Stop Valve
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Adjust from 10" to 14". Heavy duty, magnetic hold, and unbreakable plastic. During the winter, the curved air deflector directs warm air down for improved heating. In the summer point the vents up to direct the air conditioning towards the ceiling for improved cooling. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
Anderson Metal 738110-1208 Brass Pipe Fittings Anderson Metal 738110-1206 Brass Pipe Hex Bushing Anderson Metal 756101-02 Brass Pipe Tee
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2  turns past finger tight. Female pipe three ends.
Mr Heater F276152 Heater Fitting GRILL RETURN AIR 12X6IN WHT   NDS SCL-0750-T Stop Valve
Male pipe thread x left hand male thread. High-density polystyrene construction. Rust proof and scratch resistant. Rounded corners for safety. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
Anderson Metal 738103-08 Brass Pipe Fittings Mr Heater F276154 Hose Assembly Mintcraft 1RA1004 Return Air Grille
AMC Pipe Coupling, 1/2 in Nominal Size, FPT, Brass Male pipe thread x left hand male thread. With two piece screws.
Frost King MC815/3 Magnetic Ventilation Cover REGISTER SIDEWALL 10X4IN WHT  Anderson Metal 738110-1204 Brass Pipe Fitting
Flexible sheet seals metal register vents to help improve heating or cooling efficiency. Can be painted, stenciled or wall papered to match decor. Easily cut to fit vent size. Size: 8"W x 15"L. 3-Pack. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0804 Brass Pipe Fitting GRILL RETURN AIR 18X6IN WHT   Anderson Metal 738101-06 Brass Pipe Fitting
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback. Anderson Pipe Tee, 3/8 in Nominal Size, FPT, Brass
Anderson Metal 738101-04 Brass Pipe Fitting Anderson Metal 750097-0806 Brass Adapter GRILL RETURN AIR 14X8IN WHT
Anderson Pipe Tee, 1/4 in Nominal Size, FPT, Brass Anderson Tube Adapter, 1/2 x 3/8 in Nominal Size, Compression, Brass High-density polystyrene construction. Rust proof and scratch resistant rounded corners for safety. 3/16" margin turnback.
REGISTER SIDEWALL 10X6IN WHT  Mr Heater F276153 Cylinder Adapter Anderson 750066-0406 3-Piece Tubing Coupling
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Male pipe thread x left hand male thread. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
REGISTER SIDEWALL 14X6IN WHT  REGISTER SIDEWALL WHT 12X4IN  Anderson Metal 750065-05 Brass Compression Elbow
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. UPC individually bagged.
Mintcraft 1RA1206 Return Air Grille Mintcraft 1RA1006 Return Air Grille REGISTER SIDEWALL WHT 12X6IN
With two piece screws. With two piece screws. One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish.
Anderson Metal 738103-12 Brass Pipe Fittings Anderson Metal 738110-1612 Brass Pipe Fittings Anderson Metal 738110-1608 Brass Pipe Hex Bushing
AMC Pipe Coupling, 3/4 in Nominal Size, FPT, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Mintcraft 1RA1406 Return Air Grille GRILL RETURN AIR 12X6IN WHT   Anderson 50869-0402 Tube Elbow
With two piece screws. One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. UPC individually bagged.
Anderson Metal 738101-08 Brass Pipe Fitting GRILL RETURN AIR 14X6IN WHT   Mintcraft BBRA12X6 Baseboard Register
Anderson Pipe Tee, 1/2 in Nominal Size, FPT, Brass One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish. Mintcraft Baseboard Register, 6 in Duct Height, 12 in Duct Width, 1/3 in Blade Spacing, Stamped Steel, White, Painted
Mintcraft SW03-10X4 3-Way Sidewall Register Mintcraft SW02-8X4 2-Way Sidewall Register Mueller ProLine Compact Pattern Standard Port Gate Valve
Mintcraft Sidewall Register, 3-Way, 4 in Duct Height, 10 in Duct Width, Steel, White Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 8 in Duct Width, Steel, White Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.
Mintcraft SW02-10X4 2-Way Sidewall Register Mueller ProLine Compact Pattern Standard Port Gate Valve Mintcraft BBRA14X6 Baseboard Register
Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 10 in Duct Width, White Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Mintcraft Baseboard Register, 6 in Duct Height, 14 in Duct Width, White
Mintcraft SW03-12X4 3-Way Sidewall Register Mueller ProLine Full Port Gate Valve Mr Heater F276129 Cylinder Adapter
Mintcraft Sidewall Register, 3-Way, 4 in Duct Height, 12 in Duct Width, White Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Soft nose P.O.L. Most commonly used to connect 9/16" female left hand thread to 7/8" female  P.O.L.
Mr Heater F276139 Cylinder Adapter Mr Heater F273117 Thermocouple Lead Mintcraft SW02-12X4 2-Way Sidewall Register
Restricted Flow Soft Nose P.O.L. X 1/4" male thread. Most commonly used to connect 1/4? female pipe thread to 7/8? female P.O.L. Replacement part for most Mr. Heater tank top models. Proir to 2011. Mintcraft Sidewall Register, 2-Way, 4 in Duct Height, 12 in Duct Width, 1/2 in Blade Spacing, Fasteners: Screw, Stamped Steel, White, Painted
Mintcraft 1RA1212 Return Air Grille Mr Heater F276495 Coupling Nut REGISTER BASEBOARD 10X6IN WHT
With two piece screws. End fitting for Type 1, Qcc-1 gas grill systems. For appliances with 80,000 BTUs or less. Threaded shut-off, excess flow safety. All-steel construction, widespread air diffusion, easy-to-operate damper control, rolled fin for strength and safety. Plated registers have a durable decorative finish.
REGISTER SIDEWALL 24X6IN WHT  Anderson Metal 738103-16 Brass Pipe Fitting Anderson Metal 738101-12 Brass Pipe Fittings
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. AMC Pipe Coupling, 1 in Nominal Size, FPT, Brass Anderson Pipe Tee, 3/4 in Nominal Size, FPT, Brass
REGISTER SIDEWALL 12X12IN WHT Mintcraft SW02-10X6 2-Way Sidewall Register Mueller ProLine Compact Pattern Standard Port Gate Valve
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Mintcraft Sidewall Register, 2-Way, 6 in Duct Height, 10 in Duct Width, 1/2 in Blade Spacing, Steel, White Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Mintcraft SW03-10X6 3-Way Sidewall Register Mr Heater F276329 Cylinder Fill Plug Mr Heater F273754 Throwaway Cylinder Adapter
Mintcraft Sidewall Register, 3-Way, 6 in Duct Height, 10 in Duct Width, Steel, White, For Sidewall or Ceiling Applications 7/8" female P.O.L. x male plug. For use with Mr. Heater's Gas Mate ll Quick Connect Coupling kit F276330. Use L.P. gas fill plug for filling the tank with the Gas Mate ll in place. CSA certified. UL approved. 1/4" male pipe thread x 1" -20 female throwaway cylinder thread.
Mueller ProLine Compact Pattern Standard Port Gate Valve Anderson Metal 738110-2016 Brass Pipe Fitting Mueller ProLine Full Port Gate Valve
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Mr Heater F273699 Fuel Filter
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. For use with "Buddy" heaters. Most commonly used with bulk cylinder and hose assembly.
REGISTER SIDEWALL 30X6IN WHT  Mintcraft SW02-12X6 2-Way Sidewall Register Mintcraft SW03-12X6 3-Way Sidewall Register
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Mintcraft Sidewall Register, 2-Way, 6 in Duct Height, 12 in Duct Width, White Mintcraft Sidewall Register, 3-Way, 6 in Duct Height, 12 in Duct Width, White
REGISTER SIDEWALL 14X12IN WHT Mr Heater F273655 Cylinder Adapter Mr Heater F273755 Throwaway Cylinder Adapter
One-piece all-steel construction. 1/3" spaced fins set at 20 degree angle, 3/16" margin turnback. Painted metal grilles have a durable powder-coat finish. Soft nose excess flow P.O.L. x 1/4" male pipe thread. 1/4" male pipe thread x 1" -20 male throwaway cylinder thread.
REGISTER SIDEWALL WHT 10X4IN  REGISTER SIDEWALL 8X4IN WHT   NDS ProGuard Gate Valve
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Anderson Metal 730081-04 Brass Compression Cap Mintcraft BB-15W Baseboard Register
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. UPC individually bagged. Mintcraft Baseboard Register, Heavy Duty, 4-1/2 in Duct Height, 15 in Duct Width, Steel, White
REGISTER SIDEWALL 10X6IN WHT  Mueller ProLine Full Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
REGISTER SIDEWALL 12X4IN WHT  Mr Heater F276130 Throwaway Cylinder Adapter Mr Heater F271163-30 Hose Assembly
Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. 9/16" left hand male thread x 1" -20 throwaway cylinder thread with shutoff. 3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance.
Mintcraft BB10X6W Baseboard Register REGISTER SIDEWALL 12X6IN WHT  GRILL RETURN AIR 30X6IN WHT
Mintcraft Baseboard Register, 6 in Duct Height, 10 in Duct Width, White Ideal for heating or cooling. All-steel construction, two-way air deflection, 1/3" vertical fins set at 20 degree angle. 3/16" margin turnback, full range multi-louver valve. Durable powder-coat painted finish. One-piece all-steel construction. 1/3" fins set at 20 degree angle. 7/8" margin turnback. Painted grilles have a durable powder-coat finish.
Anderson Metal 730081-06 Brass Compression Fitting Anderson Metal 738103-20 Brass Pipe Coupling Gas Mate F276328 Quick Connector
UPC individually bagged. AMC Pipe Coupling, 1-1/4 in Nominal Size, FPT, Brass 1/4" male pipe thread x male plug quick connect fitting. For appliances 80,000 BTUs or less. CSA certified. For use with F276334. UL approved.
Mintcraft BB-18W Baseboard Register REGISTER BASEBOARD 15IN WHT   Mr Heater F276148 Hose Assembly
Mintcraft Baseboard Register, 4-1/2 in Duct Height, 18 in Duct Width, 1/3 in Blade Spacing, Steel, White, Painted All-steel construction. Fan shaped sunburst pattern spreads air over wide area, 2 1/2" base extension. Snap-in face removes for easy installation and cleaning. Single-valve volume control damper. Durable powder-coat painted finish. 9/16" left hand female threads on both ends. Used to connect one hose or for additional length connect two F276148, (Orgill Sku No. 418.3968) hoses with F276154, (Orgill Sku No. 437.0888) brass fitting.
Anderson Metal 738101-16 Brass Pipe Fitting Mr Heater F273761 Low Pressure Regulator Mr Heater F276136 Pressure Regulator
Anderson Pipe Tee, 1 in Nominal Size, FPT, Brass 3/8" female pipe thread x appliance end fitting. For Type 1 "QCC-1" gas grill systems. 11" W.C. regulator. 75,000 BTU maximum flow. 3/8" FPT x P.O.L. 11" low pressure regulator will operate barbecue grills and low pressure appliances.
Mr Heater F273759 Low Pressure Regulator Mueller ProLine Standard Port Gate Valve Anderson Metal 736140-0604 Brass Pipe Fitting
3/8" female pipe thread x P.O.L. 11" W.C. low pressure regulator designed with 90 degree angle. Will operate on all standard barbecue grills and other appliances. 75,000 BTU maximum flow. Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Mr Heater F271163-60 Hose Assembly Mueller ProLine Full Port Gate Valve Gas Mate F276281 Full Flow Quick Connector
3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. 1/4" male pipe thread x full flow male plug. For all appliances and all BTUs or high pressure appliances. Can be used with F276334 or can replace excess flow plug in F276181, F276186 and F276330 kits.
Mr Heater F273707 Hose Assembly REGISTER BASEBOARD 18IN WHT   Anderson Metal 750082-0604 Brass Compression
1/4" male pipe thread x 3/8" female flare. Replaces most hose assemblies between regulator and fish cooker/smoker, torches, or other appliances. All-steel construction. Fan shaped sunburst pattern spreads air over wide area, 2 1/2" base extension. Snap-in face removes for easy installation and cleaning. Single-valve volume control damper. Durable powder-coat painted finish. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Anderson Metal 738110-0602 Brass Pipe Hex Bushing
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0402 Brass Pipe Hex Bushing Anderson Metal 738110-0604 Brass Pipe Fitting Mr Heater F276124 Hose Assembly
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. 3/8" male pipe thread x 3/8" female pipe thread. Often used to connect low pressure appliances to low pressure regulators.
Mr Heater F273717 Extension Hose Assembly Anderson Metal 738103-24 Brass Pipe Fitting Mr Heater F271158-12 Flexible Pigtail Hose Assembly
Commonly used in most weed burners, torches and fish cookers. 1/4" female pipe thread x 1/4" male pipe thread. AMC Pipe Coupling, 1-1/2 in Nominal Size, FPT, Brass Acme flexible pigtail hose assembly. 1/4" inverted male flare x Acme Nut. Connects to a Stay A While Tee and Auto-Changeover Dual Stage Regulator.
B & K 106-003NL Globe Valve Anderson Metal 750065-04 Brass Compression Elbow Mr Heater F273767 Low Pressure Regulator
125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1. UPC individually bagged. 1/4" female pipe inlet x 3/8" female pipe outlet. Use with low pressure appliances up to 200,000 BTUs.
Mr Heater F273758 Throwaway Cylinder Adapter Mueller ProLine Full Port Gate Valve Mr Heater F276172 Tank Refill Adapter
1" -20 throwaway cylinder thread x soft nose P.O.L. - Propane bulk cylinder adapter with handwheel allows appliances designed for use on throwaway cylinders, and with a hose/regulator assembly to be attached directly to a bulk tank (i.e. "Mr. Camper", "Coleman Company Inc.", or "Century Primus" stove). Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Female throwaway cylinder thread x P.O.L. Refills 1 LB. bottles in 1 minute or less. (NOT AVAILABLE IN CANADA)
Anderson Metal 736140-0806 Brass Pipe Fitting Mueller ProLine Compact Pattern Standard Port Gate Valve Mintcraft 1RA1818 Return Air Grille
One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. With two piece screws.
Gas Mate F276187 Quick Connector Anderson Metal 736140-1208 Brass Pipe 3/4 x 1/2 In Nominal NDS ProGuard Gate Valve
3/8" male pipe thread x 3/8" female pipe thread. CSA certified. UL approved. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Anderson 750066-0806 3-Piece Reducing Tubing Coupling Anderson Metal 730081-08 Brass Compression Cap
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged.
Mueller ProLine Standard Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve B & K 106-004NL Globe Valve
Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. 125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1.
Anderson 750066-0808 3-Piece Tubing Coupling Mueller ProLine Full Port Gate Valve Anderson 750070-0606 Tube Elbow
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. UPC individually bagged.
Anderson Metal 750082-0806 Brass Compression Anderson Metal 750065-06 Brass Compression Fitting Mintcraft BB-24W Baseboard Register
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged. Mintcraft Baseboard Register, 4-1/2 in Duct Height, 24 in Duct Width, 1/3 in Blade Spacing, Steel, White, Painted
Anderson 750066-1008 3-Piece Tubing Coupling Mr Heater F271239 One Stop Gas Hookup Kit NDS ProGuard Gate Valve
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. One stop 5 piece kit. Complete gas hook-up for most gas appliances. 18" long line. Typical Uses: Gas logs, unvented wall, mount heaters, gas stoves, and garage heaters. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Anderson 750066-0402 3-Piece Reducing Tubing Coupling Mr Heater F273701 Hose Assembly
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Connects appliances designed to use 1 pound disposable cylinder to a 5 to 20 pound cylinder. Hand tighten swivel on both ends. Swivel 1" -20 male throwaway cylinder thread x soft nose excess flow P.O.L. with handwheel. Commonly used with portable Buddy & Big Buddy w#017-4755 fuel filter.
Anderson 750070-0608 Reducing Tube Elbow Anderson Metal 738101-02 Brass Pipe Tee Anderson Metal 750062-04 Brass Compression Fittings
UPC individually bagged. Anderson Pipe Tee, 1/8 in Nominal Size, FPT, Brass Anderson Tube Full Union, 1/4 in Nominal Size, Compression, Brass
Anderson Metal 750082-1006 Brass Compression Union Anderson Metal 750062-08 Brass Compression Fittings Anderson 750069-0404 Tube Elbow
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. Anderson Tube Full Union, 1/2 in Nominal Size, Compression, Brass UPC individually bagged.
Mr Heater F273719 High Pressure Regulator Anderson 750069-0806 Tube Elbow Anderson Metal 750082-1008 Brass Compression Union
Full flow soft nose P.O.L. x 1/4" female pipe thread. Range of 0-20 PSI. Most commonly used on torches, fish cookers, smokers or other high pressure appliances. 400,000 BTU capacity. UL Listed. UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750062-03 Brass Compression Fitting Mueller ProLine Full Port Gate Valve Anderson 750069-0604 Reducing Tube Elbow
Anderson Tube Full Union, 3/16 in Nominal Size, Compression, Brass Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. UPC individually bagged.
Anderson 750066-0404 3-Piece Tubing Coupling Anderson Metal 750069-0402 Brass Fittings Mueller ProLine Compact Pattern Standard Port Gate Valve
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Anderson Metal 750062-10 Brass Compression Fittings Anderson Metal 750062-06 Brass Compression Fittings Mr Heater F273711 Hose Assembly
Anderson Tube Full Union, 5/8 in Nominal Size, Compression, Brass Anderson Tube Full Union, 3/8 in Nominal Size, Compression, Brass Swivel 1" -20 male throwaway cylinder thread x swivel 1" -20 female throwaway cylinder thread. Used with most distribution posts or "T" and "Y" connectors as well as 1 LB. disposable cylinders. Hand tighten swivel on both ends.
Mr Heater F273702 Hose Assembly Anderson Metal 730081-10 Brass Compression Cap NDS ProGuard Gate Valve
Connects appliances designed to use 1 pound disposable cylinder to a 5 to 20 pound cylinder. Hand tighten swivel on both ends. Swivel 1" -20 male throwaway cylinder thread x soft nose excess flow P.O.L. with handwheel. Commonly used with portable Buddy & Big Buddy w#017-4755 fuel filter. UPC individually bagged. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Gas Mate F276190 Quick Connector Anderson 750066-0604 3-Piece Reducing Tubing Coupling
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. For use with natural gas and propane. Precision milled and solid brass construction. Hex design allows solid fitment. 1/4" male pipe thread x 1/4" female pipe thread socket end. Certified 250 P.S.I. rated. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson 750069-0808 Tube Elbow Anderson 750066-0608 3-Piece Tubing Coupling Anderson Metal 750062-05 Brass Compression Fitting
UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Anderson Tube Full Union, 5/16 in Nominal Size, Compression, Brass
Anderson Metal 750065-08 Brass Compression Elbow Anderson 750066-0504 3-Piece Reducing Tubing Coupling Anderson 750066-1012 3-Piece Tubing Coupling
UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Mr Heater F273751 Adapter Tee B & K 106-002NL Globe Valve Anderson 750069-0606 Tube Elbow
Excess flow soft nose P.O.L. x 1" -20 male throwaway cylinder thread. Conveniently use camper and trailer propane supply for lanterns, tabletop barbecue, etc., at parks, campsites, and rest stops. Use with hose assembly F273711 (Orgill Sku No. 258.0256), F273701 (Orgill Sku No. 999.8113), and F273702 (Orgill Sku No. 620.3814). Also use with F273710. 125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1. UPC individually bagged.
REGULATOR DUALSTAGE W/POL     Anderson Metal 50862-04 Brass Compression Union Mueller ProLine Full Port Gate Valve
Excess flow soft nose P.O.L. (Inlet) x 3/8" female pipe thread (Outlet). Use with propane fueled indoor/outdoor appliances. 160,000 BTU maximum flow. UPC individually bagged. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Anderson 750069-1008 Reducing Tube Elbow Anderson Metal 750065-10 Brass Compression Fittings Anderson 750069-0406 Tube Elbow
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson 750069-0608 Tube Elbow Anderson 750066-1412 3-Piece Tubing Coupling Anderson 750066-0812 3-Piece Tubing Coupling
UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750062-14 Brass Compression Fittings Anderson 750069-0408 Tube Elbow Anderson 750066-1408 3-Piece Reducing Tubing Coupling
Anderson Tube Union, 7/8 in Nominal Size, Compression, Brass UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750065-14 Brass Compression Elbow REGISTER BASEBOARD 24IN WHT
UPC individually bagged. All-steel construction. Fan shaped sunburst pattern spreads air over wide area, 2 1/2" base extension. Snap-in face removes for easy installation and cleaning. Single-valve volume control damper. Durable powder-coat painted finish.
   
 
1