Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > OUTDOOR & PATIO HEATERS
Sort By:
1
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metal 730561-05 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metals P60P Tube Sleeve Anderson Metal 730561-08 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metals PLL 760 Compression Sleeve WASHER WATER HEATER SUPPLY    Anderson Metals PLL 760 Compression Sleeve
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 730561-10 Brass Compression Fitting Danco 88493 Water Heater Washer Mueller ProLine Quarter Turn Solvent Ball Valve
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Water heater supply line washer. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve B and K Industries 888-221RP Bleeder Caps Anderson Metal 730561-06 Brass Compression Adapter Insert
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Fits most drainable valves. 3 styles of caps with washers included. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metals 50868-0402 Tube Adapter Frost King HD5 Heat Deflector Camco 11523 Drain Valves
UPC individually bagged. For central forced air systems. Multi-purpose, improves heating and cooling. Heavy duty, clear plastic, magnetic hold. 10" to 14" economy heat and air deflector. In winter the curved magnetized deflector directs warm air down for improved heating, in summer turn it to direct air conditioned air up for improved cooling. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Anderson Metal 750068-0602 Brass Fitting Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Camco Mfg 11061 Dip Tube Mueller ProLine Quarter Turn Ball Valve Anderson Metal 750068-0406 Brass Fittings
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Camco 07133 Element Gasket Kit Frost King HD7 Unbreakable Air Deflector Mueller ProLine Quarter Turn Ball Valve
Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Adjust from 10" to 14". Heavy duty, magnetic hold, and unbreakable plastic. During the winter, the curved air deflector directs warm air down for improved heating. In the summer point the vents up to direct the air conditioning towards the ceiling for improved cooling. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
KBI SWL-0500-T Stop and Waste Valve B and K 168-003NL Dielectric Unions KBI SWL-0750-T Stop and Waste Valve
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards.
Mueller 107-342NL Full Port Ball Valve Frost King MC815/3 Magnetic Ventilation Cover Mueller ProLine Quarter Turn Ball Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Flexible sheet seals metal register vents to help improve heating or cooling efficiency. Can be painted, stenciled or wall papered to match decor. Easily cut to fit vent size. Size: 8"W x 15"L. 3-Pack. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Anderson Metal 750068-0408 Brass Fittings B K Industries 168-004NL Dielectric Unions Camco 10623 Dielectric Nipple
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Anderson Metals P60P Tube Sleeve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
Mueller ProLine Quarter Turn Ball Valve Camco 2143 High Watt Density Water Heater Element Genova 500 Line Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. UL Listed, gasket included. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2" and 3/4" CPVC tubing (Requires couplings for attaching to 3/4" tubing). Bulk.
Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
B and K 167-004NL Dielectric Unions B and K 102-816 Water Heater Drain Valves B&K Proline Stop and Waste Valve
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve WaterFlex 0437012 Corrugated Flexible Water Heater Connector Mueller ProLine Full Port Ball Valve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve Anderson Metal 750068-0812 Brass Fittings Mueller ProLine Quarter Turn Solvent Ball Valve
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Camco 07223 Adapter Kit Mueller ProLine Full Port Ball Valve Anderson Metals 60P Tube Sleeve
Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
Anderson Metals 60P Tube Sleeve B and K Industries 168-005NL Dielectric Unions Mueller ProLine Quarter Turn Ball Valve
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Camco 2343 High Watt Density Water Heater Element CopperFlex WB034-24N Corrugated Water Heater Connector
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. UL Listed, gasket included. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Mueller ProLine Quarter Turn Ball Valve Apollo APXV1212 Quarter Turn Ball Valve B&K Proline Stop and Waste Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve WaterFlex 0437018 Corrugated Flexible Water Heater Connector Mueller ProLine Full Port Ball Valve
Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61.
Anderson Metals PLF 760 Compression Sleeve B&K Proline Stop and Waste Valve Mueller ProLine Full Port Ball Valve
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Camco 7723 Dual Element Lower Water Heater Thermostat Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat
Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 2203 High Watt Density Water Heater Element Camco Mfg 10473 Pressure Relief Valve 3/4 In CONNECTOR SS 3/4F1960X3/4X18IN
UL Listed, gasket included. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever.
Camco 4363 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element Mueller ProLine Full Port Ball Valve
UL Listed, gasket included. UL Listed, gasket included. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
B&K Proline Stop and Waste Valve CopperFlex WB00-12N Water Heater Connector Anderson Metal 750064-08 Brass Compression Tee
Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. UPC individually bagged.
Camco 2293 High Watt Density Water Heater Element Mueller ProLine Full Port Ball Valve Camco 2283 High Watt Density Water Heater Element
UL Listed, gasket included. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. UL Listed, gasket included.
Anderson Metal 50872-0402 Brass Compression Tee Camco 2263 High Watt Density Water Heater Element Camco 4383 High Watt Density Water Heater Element
UPC individually bagged. UL Listed, gasket included. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
B&K Proline Stop and Waste Valve Mueller ProLine Quarter Turn Solvent Ball Valve Camco 4603 High Watt Density Water Heater Element
Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 3943 High Watt Density Water Heater Element B&K Proline 7700 Full Port Solder Ball Valve Camco 2223 High Watt Density Water Heater Element
UL Listed, gasket included. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. UL Listed, gasket included.
Camco 01023 Flapper Style Dielectric Heat Trap WaterFlex 0437024 Corrugated Flexible Water Heater Connector Mueller ProLine Quarter Turn Ball Valve
Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
CopperFlex WB00-15N Water Heater Connector VALVE BALL 1-1/2IN S80 SOLVENT Anderson Metals PLF 760 Compression Sleeve
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Camco 4503 High Watt Density Water Heater Element Camco 10063 Water Heater Connector Camco 4483 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
B&K Proline Stop and Waste Valve Mueller ProLine Full Port Ball Valve Camco 2583 Low Watt Density Water Heater Element
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. UL & CSA listed, gasket included.
Camco 2163 High Watt Density Water Heater Element Mueller ProLine Full Port Ball Valve Camco 4523 High Watt Density Water Heater Element
UL Listed, gasket included. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. UL Listed, gasket included.
STOP VALVE W/DRAIN 1/2IN      Anderson Metal 738104-04 Brass Pipe Union Anderson Metal 738104-06 Brass Pipe Union
STOP VALVE W/DRAIN 1/2IN
Our Price: $11.78
Anderson Pipe Union, 1/4 in Nominal Size, FPT, Brass Anderson Pipe Union, 3/8 in Nominal Size, FPT, Brass
Anderson Metal 738104-02 Brass Pipe Fitting Mueller ProLine Full Port Ball Valve CopperFlex WB00-18N Water Heater Connector
Anderson Pipe Union, 1/8 in Nominal Size, FPT, Brass -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Apollo APXV3434 Quarter Turn Ball Valve VALVE BALL 1/2IN F1960        Watts 100XL Temperature and Pressure Relief Valve
Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Anderson Metals 60P Tube Sleeve Watts LL100XL-150/210 Temperature/Pressure Relief Valve B&K Proline 7700 Full Port Ball Valve
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
Watts 100XL Temperature and Pressure Relief Valve Mueller ProLine Full Port Ball Valve Camco 4703 Low Watt Density Water Heater Element
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. UL Listed, gasket included.
Camco 2363 High Watt Density Water Heater Element Fluidmaster B1H12 Water Heater Connector Anderson Metal 738104-08 Brass Pipe Union
UL Listed, gasket included. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Anderson Pipe Union, 1/2 in Nominal Size, FPT, Brass
STOP VALVE W/DRAIN 3/4IN      Mueller ProLine Full Port Ball Valve Anderson Metals 750060-14 Compression Sleeve
STOP VALVE W/DRAIN 3/4IN
Our Price: $12.89
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750064-10 Brass Compression Fittings Camco 4803 High Watt Density Water Heater Element Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector
UPC individually bagged. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Plumb Pak PP888-10LF Water Heater Connector CopperFlex WB00-24N Water Heater Connector Mueller ProLine Full Port Ball Valve
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Camco 23503 Dielectric Union VALVE BALL 3/4IN F1960        Anderson Metals BG3 Compression Sleeve
Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Watts 100XL-8-150 Temperature and Pressure Relief Valve Fluidmaster B4H18 Water Heater Connector Fluidmaster B3H18 Water Heater Connector
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector Fluidmaster B1H18 Water Heater Connector Fluidmaster B2H18 Water Heater Connector
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Camco 4643 High Watt Density Water Heater Element Plumb Pak PP888-1LF Water Heater Connector Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Camco 08143 Replacement Single Element Water Heater Thermostat Anderson Metal 738104-12 Brass Pipe Fittings Anderson Metal 738106-161612 Brass Pipe Fitting
UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Anderson Pipe Union, 3/4 in Nominal Size, FPT, Brass Anderson Pipe Reducing Tee, 1 x 1 x 3/4 in Nominal Size, IPT, Brass
Fluidmaster B1H24 Water Heater Connector Camco 11572 Anode Rod B&K Proline 7700 Full Port Solder Ball Valve
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson Metals BG3 Compression Sleeve Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included.
Plumb Pak PP888-3LF Water Heater Connector Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 08163 Adjustable Water Heater Upper Thermostat
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Anderson Metals 60P Tube Sleeve Camco 7843 Single Element Water Heater Thermostat With HLC SharkBite 22222-0000LF 1-Piece Full Port In-Line Ball Valve
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
VALVE BALL SHARKBITE BRS 1/2IN Camco 09423 Replacement Gasket Kit Mueller ProLine Full Port Ball Valve
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson Metal 750068-0806 Brass Fittings NDS WSU-1520-S Full Port Pool Diverter Single Union Ball Valve Camco 10493 Temperature and Pressure Relief Valves
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Full port design, preset at 5 psi or 12 feet of head and can be adjusted to 14 psi or 32 feet of head, combination of 1-1/2" socket and 2" spigot on each end can be used on both sizes of pipe, single union design for easy serviceability, EPDM o-ring, meets/exceeds ASTM & Ansi STANDARDS. Bulk. Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
B&K Proline 7700 Full Port Ball Valve Watts 100XL-8-125 Temperature and Pressure Relief Valve Mueller ProLine Full Port Ball Valve
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
Anderson Metal 750068-0608 Brass Compression Fittings Cash Acme U3088FLEX24LF Braided Flexible Water Heater Connector Plumb Pak PP888-11LF Water Heater Connector
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel
WaterFlex 0437118 Corrugated Flexible Water Heater Connector Anderson Metal 750068-0808 Brass Compression Fittings Cash Acme 22441LF Sharkbite
Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip.
Plumb Pak PP888-4LF Water Heater Connector Cash Acme 22604LF Sharkbite Water Heater Installation Kit Anderson Metal 738104-16 Brass Pipe Union
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Anderson Pipe Union, 1 in Nominal Size, FPT, Brass
Mueller ProLine Full Port Ball Valve SharkBite 22185-0000LF 1-Piece Full Port In-Line Ball Valve VALVE BALL SHARKBITE BRS 3/4IN
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
VALVE T/P 3/4IN 3-5/16LS150PSI B&K Proline 7700 Full Port Ball Valve BALL VALVE SLIP 1/2IN
BALL VALVE SLIP 1/2IN
Our Price: $21.26
Temperature and pressure relief valve. Relieves pressure up to 150 psi/210F. 3/4 inlet/outlet, copper alloy body, 3-5/16" shank. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline 7700 Full Port Solder Ball Valve Camco 2923 Ultra Low Watt Density Water Heater Element Camco 2853 Ultra Low Watt Density Water Heater Element
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. UL & CSA listed. Gasket included. Best when water has high mineral content, withstands dry firing, heats in lime and sand buildup that would burn out ordinary elements, highest grade nickel and chromium incoloy, UL Listed, gasket included.
Camco 2903 Ultra Low Watt Density Water Heater Element Anderson Metal 750064-14 Brass CompressionTee Camco 10193 Water Heater Connector Kit
UL Listed, gasket included. UPC individually bagged. Contains: (2) 3/4" x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll teflon tape.
Plumb Pak PP888-12LF Water Heater Connector Anderson Metal 750068-0302 Brass Fittings Mueller ProLine Full Port Ball Valve
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
VALVE BALL 1IN F1960          Anderson Metal 750064-04 Brass Compression Fitting Anderson Metal 750068-1008 Brass Compression Fittings
UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Mueller ProLine Full Port Ball Valve Anderson Metal 750068-0402 Brass Fitting WaterFlex 0437124 Corrugated Flexible Water Heater Connector
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 4943 Ultra Low Watt Density Water Heater Element Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Best when water has high mineral content. Withstands dry firing. Heats in lime and sand buildup that would burn out ordinary elements. Highest grade nickel and chromium incoloy alloy. Ultra low-watt density (50 watts per square inch). UL & CSA listed. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve B&K Proline Ground Key Stop and Drain Valve Camco 2723 Low Watt Density Water Heater Element
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
BALL VALVE SLIP 3/4IN         Watts 374A Boiler Pressure Relief Valve B&K Proline Ground Key Stop and Drain Valve
BALL VALVE SLIP 3/4IN
Our Price: $26.50
Used in hot water boiler applications to protect against excessive pressure on all type of hot water heating boiler equipment. Iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Standard pressure setting: 30 psi, pressure range: rated up to 550,000 BTU/hr at 30 psi (2 bar) setting only. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2.
Anderson Metal 750064-06 Brass Compression Fittings Frost King ACB80H Light Duty Air Conditioner Bracket Anderson Metal 750068-0404 Brass Fitting
UPC individually bagged. Universal air conditioner metal support bracket installs completel