Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > TORPEDO HEATERS
Sort By:
1
Harvey's 017072B-500 Pipe Thread Seal Tape Mintcraft PMB-445 Pipe Seal Tape Harvey's 017117B Pipe Thread Seal Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Mintcraft Plumbers Tape, 1/2 in Width, 300 ft Length, PTFE Backing, For Fixes Leaks and Loose Pipes 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Plumb Pak 04151 Pipe Thread Seal Tape Plumb Pak PP20855100 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape
Plumb Pak Thread Seal Tape, 1/2 in Width, 520 in Length, PTFE Backing, For Threaded Pipe For use on plumbing threads to prevent leaking. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Mueller ProLine In-Line Check Valve Mueller ProLine In-Line Check Valve Harvey's 017252-144 Pipe Thread Seal Tape
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Anderson Metal 750097-0604 Brass Flare  Adapter Anderson 750066-0606 3-Piece Tubing Coupling Anderson 750066-0302 3-Piece Reducing Tubing Coupling
Anderson Tube Adapter, 1/4 x 3/8 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
TAPE SEAL PTFE 1X520          Harvey's 017165-144 Pipe Thread Seal Tape Oatey 31403 Gas Line Thread Tape
0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. 0.4 density, 0.003" thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to + 500 degree Fahrenheit. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 - 1.5 grams/cubic centimeter and 4 Mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.
Oatey 31402D Water Line Thread Seal Tape Harvey's 017065 Pipe Thread Seal Tape Anderson Metal 738119-0604 Brass Pipe Fitting
Provides fast positive seal for water lines, sewage lines, and sprinkler systems.  Effective on metal or plastic threads. 3 Mils thick, and density of 1.35 - 1.5 grams/cubic centimeter. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. Extra heavy, full density tape especially for gas lines. Recommended leakproof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating 10,000 PSI; .0035 mil thick, tolerates -450 to +500 degrees Fahrenheit. Meets Federal Specification T-27730A. U.L. Listed. AMC Pipe Reducing Coupling, 3/8 x 1/4 in Nominal Size, IPT, Brass
KBI DF-0750-T Chemical Resistant Drum Faucet Anderson Metal 738119-0602 Brass Pipe Reducing Coupling Anderson Metal 756101-02 Brass Pipe Tee
3/4"MPT polyethylene drum faucet. Low friction bearing surface allows for easy open and close. Bulk. AMC Pipe Reducing Coupling, 3/8 x 1/8 in Nominal Size, IPT, Brass One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2  turns past finger tight. Female pipe three ends.
BREAKER VACUUM BRASS 3/4INCH  Mueller ProLine In-Line Check Valve B&K Proline Solvent Stop Valve
SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
B&K Proline Solvent Stop Valve B&K 108-904RP Backflow Preventer Vacuum Breaker Genova 500 Straight Supply Line Valve
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk.
Plumb Pak PP20062LF 1/4 Turn Straight Shut-Off Valve Anderson Metal 738119-0806 Brass Pipe Fitting Anderson Metal 738101-06 Brass Pipe Fitting
Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated AMC Pipe Reducing Coupling, 1/2 x 3/8 in Nominal Size, IPT, Brass Anderson Pipe Tee, 3/8 in Nominal Size, FPT, Brass
Anderson Metal 738101-04 Brass Pipe Fitting Plumb Pak PP20050LF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP20052LF Quarter Turn Straight Stop Valve
Anderson Pipe Tee, 1/4 in Nominal Size, FPT, Brass Chrome. Chrome.
SC125B Sump Check Valve Anderson Metal 750097-0806 Brass Adapter Plumb Pak PP20051LF 1/4 Turn Angle Shut-Off Valve
Durable sonic welded thermo-plastic body. Anderson Tube Adapter, 1/2 x 3/8 in Nominal Size, Compression, Brass Chrome.
Plumb Pak PP20060LF Quarter Turn Angle Stop Valve Anderson 750066-0406 3-Piece Tubing Coupling Plumb Pak PP20053LF 1/4 Turn Straight Shut-Off Valve
Chrome Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Chrome.
Anderson Metal 750065-05 Brass Compression Elbow Genova 500 Supply Line Valve B and K 191-432HC Water Supply Line Valves
UPC individually bagged. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2", 3/4", and 1" CPVC tubing (Requires couplings for attaching to 3/4" or 1" tubing). Bulk. B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, Sweat x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body
B and K 191-222HC Water Supply Line Valves Plumb Pak PP20063LF 1/4 Turn Straight Shut-Off Valve B&K Proline 1/4 Turn Angle Stop Valve
B & K Industries Supply Line Valve, Straight, 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body 5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome. B&K Angle Stop Valve, 1/4 Turn, Series: Proline, 1/2 X 3/8 in Nominal, Sweat X Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated, For Use With Water Supply shut-off Application
B&K Proline 1/4 Turn Angle Angle Supply Line Valve Plumb Pak PP20061LF 1/4 Turn Angle Shut-Off Valve Anderson 50869-0402 Tube Elbow
B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Water, Brass Body Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 5/8 X 3/8 in Nominal, OD X OD End, Brass Body, Chrome Plated UPC individually bagged.
B K Industries 191-232HC Water Supply Line Valves Anderson Metal 738101-08 Brass Pipe Fitting Watt P-672 Push Fit Straight Stop Valve
B & K Industries Supply Line Valve, Straight, 1/2 x 3/8 in Nominal, FIP x Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body Anderson Pipe Tee, 1/2 in Nominal Size, FPT, Brass Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground.
Watt P-675 Push Fit Angle Stop Valve B&K 108-904 Silcock Vacuum Breaker Camco 09943 Water Heater Element Wrenches
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved. Zinc plated element wrenches fit all screw-in elements and 1-1/2" nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can?t.
B&K Proline 1/4 Turn Angle Angle Supply Line Valve Watt P-676 Push Fit Angle Stop Valve Apollo Valves APXVS1238C 1/4 Turn Straight Stop Valve
B&K Angle Supply Line Valve, 1/4 Turn, Angle, Series: Proline, 5/8 X 3/8 in Nominal, Compression End, 125 psi, Media: Water, Brass Body, 180 deg F, NSF Approved, cUPC Compliant, Chrome Plated Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe
Watts P-673 Quick Connect Straight Stop Valve Plumb Pak PP20321LF 1/4 Turn Transitional Angle Supply Line Valve Watts LF PBQTR-615 1/4 Turn Straight Stop Valve
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Angle. Chrome Connects to existing valves. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Plumb Pak PP20322LF 1/4 Turn Transitional Straight Supply Line Valve Apollo Valves APXVA1238C 1/4 Turn Angle Stop Valve STOP STRGHT 1/2F1960 X 3/8COM
Straight, chrome. Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Pex Barb X Comp End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe
Anderson Metal 738119-1206 Brass Pipe Reducing Coupling Anderson Metal 738119-1208 Brass Pipe Fitting B&K Proline Stop Valve
AMC Pipe Reducing Coupling, 3/4 x 3/8 in Nominal Size, IPT, Brass AMC Pipe Reducing Coupling, 3/4 x 1/2 in Nominal Size, IPT, Brass Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
B and K Industries 191-032HC Water Valve Watts P-671 Quick Connect Straight Stop Valve PEX VALVE STRAIGHT STOP 1/2IN
B & K Industries Supply Line Valve, Straight, 5/8 x 3/8 in Nominal, Compression End, 125 psi, Media: Water, Chrome-Plated Lead-Free Brass Body Works with copper, CPVC, PEX, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" x 1/4" OD. Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
STOP ANGLE 1/2F1960 X 3/8COM  Watts LF PBQT-090 1/4 Turn Angle Stop Valve STOP STRGHT 1/2F1960 X 1/4COM
Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome. Bagged.
STOP ANGLE 1/2F1960 X 1/4COM  NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
Watt P-677 Push Fit Angle Stop Valve Watts LF PBQT-290 1/4 Turn Angle Stop Valve Mueller ProLine In-Line Check Valve
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Solid ball valve design. Brass stem. Water supply valve, 1/4 turn on and 1/4 turn off. Chrome plated. Bagged. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
PEX VALVE STOP COMPRSN 1/2X3/8 Watts PL-3012 Push-Fit Quick Connect Straight Stop Valve Sta-Rite FP0026-6D-P2 Sump Pump Check Valve
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes. Double-threaded for use with 1-1/4" or 1-1/2" sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole.
B&K 109-204 Self-Closing Drum and Barrel Faucet Camco 11260 Drain Pan With 1 in PVC Fitting Camco 9973 Quick Change Element Tool
Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water.
Pro Bite 190-932HC/LF953AR Water Valve Watts P-450 Quick Connect Straight Stop Valve Plumb Pak PP20064LF Quarter Turn Straight Stop Valve
Connects to copper, PEX or CPVC, no glue, soldering, crimping or special tools, approved for in-wall and underground burial, approved for potable water, radiant and hydronic heating, easily repositioned or removed. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Chrome plated.
Watt P-678 Push Fit Angle Stop Valve Watts P-650 Quick Connect Straight Stop Valve Watts PL-3042 Push-Fit Quick Connect Straight Stop Valve
Quick Connect connectors are designed and manufactured for many years of trouble free service. Produced of off-white Polysulfone, a high performance thermal plastic material, the design allows for quick and easy connections without the use of installation tools. NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, and ASSE 1061 approved. Polybagged. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve Pro Bite 191-932HC/LF953SR Water Supply Line Valves
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Mueller Push Fit Valve, Straight Pattern, 1/2 x 3/8 in Nominal, Push-Fit x Compression End, 200 psi, Media: Water, Brass Body, 200 Deg F, Standards: CSA Certified, NSF and cUPC Approved, Chrome Plated Finish, For Plumbing Applications
BrassCraft G2CR19X CD 1/4 Turn Angle Stop Valve Watts PL-3041 Push-Fit Quick Connect Straight Stop Valve Plumb Pak PP60PCLF Quarter Turn Angle Stop Valve
BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, ASME A112.18.1/CSA B125.1, IAPMO Certified Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Chrome
BrassCraft G2CR14X CD 1/4 Turn Straight Stop Valve Mueller ProLine In-Line Check Valve B&K Proline Stop Valve
BrassCraft Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Compression End, 125 psi, Media: Potable Water, Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, Rubber O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Rising stem, six-point cast-iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
Mueller ProLine Swing Check Valve Anderson Metal 738101-12 Brass Pipe Fittings VALVE CHCK ABS 1-1/4 RUB BOOT
Certified to NSF 61 requirements. Anderson Pipe Tee, 3/4 in Nominal Size, FPT, Brass Rubber boot inlet and outlet. Full flow design, weighted flapper valve
Watts PL-3011 Push-Fit Quick Connect Straight Stop Valve Plumb Pak PP51PCLF 1/4 Turn Angle Shut-Off Valve Arrowhead Brass PK1430 Air Vent Assembly Kit
Plastic quick connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.. Quarter turn angle shut off valve. Chrome. Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series.
Plumb Pak PP50PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP46PCLF 1/4 Turn Angle Stop Valve BrassCraft G2R10X CD 1/4 Turn Straight Stop Valve
Chrome. Carded. Chrome plated brass.
Flair-It 16879 Straight Stop Valve PEX VALVE MANIFOLD 1/2IN      PEX VALVE MANIFOLD RED 1/2IN
For hot or cold water In-line valve with PEX connections on both ends. Bar coded. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
PEX VALVE MANIFOLD BLK 1/2IN  VLV QTR TURN ANG 1/2X1/4IN    VLV QTR TURN STR 1/2X1/4
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
Camco 11460 Drain Pan With 1 in PVC Fitting Camco 10023 Water Heater Continuity Tester With Battery B&K Proline Stop Valve
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Test your elements and thermostats while still in the water heater. 1 piece. 125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G.
VALVE CHCK ABS 1-1/2 RUB BOOT Plumb Pak PP63PCLF 1/4 Turn Straight Shut-Off Valve Plumb Pak PP61PCLF 1/4 Turn Angle Shut-Off Valve
Rubber boot inlet and outlet. Full flow design, weighted flapper valve 5/8" O.D. (1/2" Nom. Copper) x 3/8" O.D. Chrome. Plumb Pak Angle Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Nominal Compression X OD End, Brass Body, Chrome Plated
BrassCraft G2R15X CD 1/4 Turn Angle Stop Valve Flair-It 16892 Water Supply Line Valve Plumb Pak PP52PCLF 1/4 Turn Straight Shut-Off Valve
Chrome plated brass. 1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. No special tools required. Chrome.
SC150SRS Sump Check Valve SC125SRS Sump Check Valve BrassCraft G2R12X CD 1/4 Turn Straight Stop Valve
Durable sonic welded thermo-plastic body. Durable sonic welded thermo-plastic body. BrassCraft Straight Stop Valve, 1/4 Turn, 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, C36000 Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM Stem O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated
Plumb Pak PP123PCLF 1/4 Turn Angle Shut-Off Valve Camco 11360 Drain Pan With 1 in PVC Fitting BrassCraft G2R17X CD 1/4 Turn Angle Stop Valve
Angle, chrome For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. BrassCraft Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, FIP X Compression End, 125 psi, Media: Potable Water, Compliant Brass Body, Santoprene Stem Barrel, Glass-Filled Polypropylene Stem Shaft Trim, EPDM O-Ring Softgoods, Corrosion Resistant, Chrome Plated Zinc Die-Cast Handle, 40 - 140 deg F, Chrome Plated, Carded
Watts LF PBQTP-250 1/4 Turn Angle Stop Valve Watts LF PBQT-118 1/4 Turn 3-Way Angle Stop Valve Plumb Pak PP62PCLF 1/4 Turn Straight Shut-Off Valve
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated
PEX VALVE ANGLE COMP 1/2X3/8IN Plumb Pak PP53-1PCLF 1/4 Turn Straight Shut-Off Valve Watts LF PBQT-218 1/4 Turn 3-Way Angle Stop Valve
Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, FIP X OD End, Brass Body, Chrome Plated Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated.
Watts LF PBQT-113 1/4 Turn 3-Way Angle Stop Valve Plumb Pak PP53PCLF 1/4 Turn Straight Shut-Off Valve VALVE CHECK UNIV 1-1/4AND1-1/2
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Chrome. Includes one universal check valve and two adapters. Made from durable ABS plastic. High quality NItril-Bruna N seal. Fits all: 1-1/4 & 1-1/2 MPT & FPT.
Sharkbite 23036-0000LF 1/4 Turn Angle Stop Valve Sharkbite 23037-0000LF 1/4 Turn Straight Stop Valve Sharkbite 23048-0000LF 1/4 Turn Angle Stop Valve
The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in an combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels. Lead Free Complaint.
Flair-It 16880 Straight Stop Valve Sharkbite 23049-0000LF 1/4 Turn Straight Stop Valve VALVE COMP ANG STOP 1/2X1/4IN
For hot or cold water In-line valve with PEX connections on both ends. Bar coded. The SharkBite Connection System is an instant push-fit connection that connects copper tubing, CTS CPVC and PEX pipe in combination - no soldering, clamps, unions or glue required. Certified to 200 PSI and 200DegF. Compact, robust DZR brass body. Foundation of a strong, corrosion resistant, durable fitting. Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution. Approved to be used underground and behind walls without access panels. Lead Free Complaint. SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC, or PEX pipe in any combination with no soldering, clamps, unions, or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces.
VALVE STRT STOP COMP 1/2X1/4IN Plumb Pak PP67PCLF 1/4 Turn Angle Shut-Off Valve Plumb Pak PP62-1PCLF 1/4 Turn Angle Shut-Off Valve
SharkBite is the Push-Fit connection system that is really taking hold. It?s the easiest way to join copper, CPVC, or PEX pipe in any combination with no soldering, clamps, unions, or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. 5/8" O.D. (1/2" NOM. Copper) x 7/16" O.D. - 1/2" O.D. Carded. 5/8" O.D. (1/2" Nom. Copper) x 1/2" O.D.
Plumb Pak PP51-1PCLF 1/4 Turn Angle Shut-Off Valve Anderson Metal 738119-1612 Brass Pipe Fittings Camco 11400 Drain Pan With 1 in PVC Fitting
Quarter turn angle shut off valve. Chrome. AMC Pipe Reducing Coupling, 1 x 3/4 in Nominal Size, IPT, Brass For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
BrassCraft G2PS14X CD 1/4 Turn Straight Stop Valve Plumb Pak PP2068POLF Quarter Turn Straight Stop Valve Plumb Pak PP2622POLF 1/4 Turn Push-Fit Quick Lock Angle Stop Valve
Quarter turn. Compatible with copper, PEX and CPVC. 1/2" Nom Push Connect x 3/8" OD Comp 5/8" O.D. Comp. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. 1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor.
Plumb Pak PP2071LF Quarter Turn Straight Stop Valve Flair-It 16893 Stop Valve Plumb Pak PP855-1 Pipe Thread Seal Tape
Chrome plated. 1/2" x 3/8" compression. Connects 1/2" pex or polybutylene and 3/8" compression. For use on plumbing threads to prevent leaking.
B&K Proline Stop Valve B&K Proline 1/4 Turn Straight Stop Valve Plumb Pak PP61-1PCLF 1/4 Turn Straight Shut-Off Valve
125 PSI WOG,  Rising stem, six-point cast-iron handle, threaded ends comply with ANSI B1.20.1, CSA certified, certified to NSF 61-G. ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant. Plumb Pak Straight Shut-Off Valve, 1/4 Turn, 1/2 X 1/2 in Nominal, Copper Sweat X OD End, Brass Body, Chrome Plated
Watts LF PBQT-213 1/4 Turn 3-Way Angle Stop Valve PEX VALVE ANGLE 1/2IN         NDS flo Control 1011 Reinforced Poppet Check Valve
PEX VALVE ANGLE 1/2IN
Our Price: $12.02
Solid ball valve design allows full open or close with a quarter turn and eliminates sticking problems. Brass stem. 1/4 turn on, 1/4 turn off. Chrome plated. Use to install shutoff in supply line. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve Simmons 8842 Hydrant Plunger BrassCraft G2CR34X CD 1/4 Turn Straight Stop Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Replacement plunger for Simmons 800 series lead free, deluxe frost-proof yard hydrants. Chrome 1/4 turn straight stop. 1/2" nominal compression inlet x 1/2" O.D. compression outlet. Carded.
Watts P-866 Quick Connect Straight Stop Valve Plumb Pak PP60-1PCLF Quarter Turn Angle Stop Valve PEX VALVE 3W 1/2X1/2X1/2IN
Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Polybagged Plumb Pak Angle Stop Valve, Quarter Turn, 1/2 X 1/2 in Nominal, Copper Sweat X Compression End, Media: Water, Brass Body, Chrome Plated, For Hot and Cold Water Applications Use to bypass flow to water heaters and softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Approved for behind the wall and underground applications. Patent Pending.
BrassCraft G2PS19X CD 1/4 Turn Angle Stop Valve Plumb Pak K2622PCPOLF 1/4 Turn Quick Lock Angle Supply Line Valve Mueller ProLine Swing Check Valve
Quarter turn. Compatible with copper, PEX and CPVC. 1/2" Nom Push Connect x 3/8" OD Comp 1/2. X 3/8" O.D. Valve pushes on to PEX, CPVC or Copper, Double O-ring seal, safety clip, Use for tight spots, a shorter stub out, or finished wall/floor. Certified to NSF 61 requirements.
B & K ProLine Foot Valve PEX VALVE BYPASS 1/2IN        PEX VALVE CENTER DRN 3WY 1/2IN
PEX VALVE BYPASS 1/2IN
Our Price: $12.77
Spring-loaded poppet, O-ring seal, threaded ends comply to ANSI B1.20.1. Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
PEX BYPASS 1/2X1/2MPTX1/2IN   STOP VALVE ADAPTER 3/8MX3/8F  Wayne 66005-WYN Check Valve
Use to bypass flow for water heaters & softeners. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending Plastic adapter stop valve. 1/4 OD x 3/8 Male Comp x 3/8 Female comp 1-1/2" pump thread with 1-1/4" or 1-1/2" pipe connection.
FV441 4-In-1 Foot Valve Plumb Pak PP2659PCLF Quarter Turn Angle Stop Valve Mueller ProLine In-Line Check Valve
Nylon Body. Corrosion resistant parts. Fits four pipe sizes, 3/4", 1", 1-1/4" and 1-1/2". Chrome Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
Camco 9953 Professional Element Socket World Marketing FA1005 Forced Air Air Filter Kit Apollo Valves APXPV1238A 1/4 Turn Angle Stop Valve
Fits standard 1/2" socket drive to replace screw-in water heater elements. Fits all Dura Heat kerosene forced air heaters except DFA400/650 series. Also fits most DynaGlo and DynaPro models. Kit includes 1 Intake Filter #287-4100-10, 1 Lint Filter #287-4100-00, and 1 Output Filter #287-4000-10. Apollo Valves Angle Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe
Apollo Valves APXPV1238S 1/4 Turn Straight Stop Valve Watts KwikStop 1/4 Turn Quick Connect Straight Stop Valve Plumb Pak PP2103LF Quarter Turn Straight Stop Valve
Apollo Valves Straight Stop Valve, 1/4 Turn, 1/2 X 3/8 in Nominal, Push-Fit X Compression End, Brass Body, 180 deg F, ASTM F1807, NSF Approved, For Use With Apollo Pex Pipe Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. 1/2" CTS x 3/8" ODC. Connects to existing valves. Solid chrome plated brass ball. Brass forged body and solid brass stem. Teflon seats - melting point of 621 degrees Fahrenheit. Captured nut. Compression connection. 100% pressure leak tested. Carded.
Plumb Pak PP855-100 Pipe Thread Seal Tape Watts KwikStop 1/4 Turn Quick Connect Angle Stop Valve Anderson Metal 750086-0610 Brass Compression Adapter
For use on plumbing threads to prevent leaking. Works with copper, CPVC, Pex, LPDE, MPDE, HDPE and polybutylene tubing in hot and cold water applications. Incorporates stainless steel gripping teeth in the collets, allowing the connectors to interconnect with multiple materials without special tools or tube inserts. Exclusive O-ring guide insures zero-leak connections. Tube orientation can be changed by a simple twist, reducing the amount of tubing required to plumb a water system. Reusable, approved for use behind walls and underground. Use with copper, aluminum, or plastic tubing for water, gas, oil, and vacuum lines in a -65 to 250-degree temperature range. Easy to disassemble, no flaring tool required. UPC individually bagged.
B&K Proline 1/4 Turn Straight Stop Valve Anderson Metal 738101-16 Brass Pipe Fitting Camco 20800 Drain Pan With 1 in PVC Fitting
ASGE 1061, PSF 61 approved, cUPC, IAPMO listed, NSF/ANSI 61, AB1953 compliant. Anderson Pipe Tee, 1 in Nominal Size, FPT, Brass For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Plumb Pak PP32-1PCLF 1/4 Turn Transitional Angle Supply Line Valve Plumb Pak PP32-2PCLF 1/4 Turn Transitional Straight Supply Line Valve VLV QTR TRN INLN 1/2X1/2X1/4IN
Angle. Chrome Straight, chrome.
VLV QTR TRN INLN 1/2X1/2X3/8IN World Marketing FA1007 Forced Air Kerosene Photocell Plumb Pak PP2901VLF 3-Way Stop Valve
Fits all DuraHeat kerosene forced air heaters except DFA400/650 series. Chrome plated.
Sta-Rite Industries FP0026-10 Flotec QRTR TURN ANG VLV 5/8OD       PEX VALVE STRAIGHT STOP 3/4IN
Prevents water backflow into sump basin.  Accept 1-1/4" or 1-1/2" discharge lines.  Corrosion-resistant construction.  Non-threaded, in-line check valve with rubber sleeve and hose clamps. Push Fit application valve fits 1/2" CTS, PEX, CPVC. Use to install shutoff in straight pipe run.  Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
VALVE STR 5/8X12 SS TOI SUPPLY Anderson Metal 750082-0604 Brass Compression NDS flo Control 1011 Reinforced Poppet Check Valve
Stainless steel Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve Wayne 57028-001 Check Valve Kit With Rubber Boot and Metal Collars Camco 20840 Drain Pan With 1 in PVC Fitting
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Includes: Two convertible fittings and four hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4" or 1-1/2" OD pipe. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Anderson Metal 750065-04 Brass Compression Elbow Plumb Pak PP2903VLF 3-Way Quarter Turn Stop Valve Plumb Pak PP2902VLF 3-Way Stop Valve
UPC individually bagged. Chrome plated. Chrome plated. Carded
Plumb Pak PP2904VLF 3-Way Stop Valve World Marketing FA1008 Spark Plug World Marketing FA1009 Spark Plug
Chrome plated. Carded For use with DuraHeat kerosene portable forced air heaters and also fits similar DynaGlo and DynaPro models. For use with DuraHeat kerosene portable forced air heaters and also fits similar DynaGlo and DynaPro models.
NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve QRTR TURN ANG VLV 5/8OD
Made