Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > PROPANE HEATERS
Sort By:
1
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
Anderson Metals PLL 760 Compression Sleeve Anderson Metals PLL 760 Compression Sleeve Anderson Metal 756103-02 Brass Pipe Coupling
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. AMC Pipe Coupling, Barstock, 1/8 in Nominal Size, Threaded, Brass
Anderson Metal 756103-04 Brass Pipe Coupling Legend 313-404 Water Service Fitting Legend 313-405 Water Service Fitting
AMC Pipe Coupling, Barstock, 1/4 in Nominal Size, Threaded, Brass Recommended on all flexible plastic connections Recommended on all flexible plastic connections
Mueller ProLine In-Line Check Valve Mueller ProLine In-Line Check Valve Anderson Metals 50868-0402 Tube Adapter
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. UPC individually bagged.
Legend 313-414 Water Service Fitting Anderson Metal 750068-0602 Brass Fitting Anderson Metal 756103-06 Brass Pipe Coupling
Recommended on all flexible plastic connections. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. AMC Pipe Coupling, Barstock, 3/8 in Nominal Size, Threaded, Brass
Legend 313-406 Water Service Fitting Anderson Metal 738103-04 Brass Pipe Fitting Anderson Metal 738103-06 Brass Pipe Coupling
Recommended on all flexible plastic connections. AMC Pipe Coupling, 1/4 in Nominal Size, FPT, Brass AMC Pipe Coupling, 3/8 in Nominal Size, FPT, Brass
Anderson Metal 738103-02 Brass Pipe Coupling Anderson Metals 730061-10 Compression Nut Anderson Metal 750068-0406 Brass Fittings
AMC Pipe Coupling, 1/8 in Nominal Size, FPT, Brass Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Mueller ProLine In-Line Check Valve Anderson Metal 738103-08 Brass Pipe Fittings Anderson Metal 750068-0408 Brass Fittings
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. AMC Pipe Coupling, 1/2 in Nominal Size, FPT, Brass Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
B K Industries 102-003 Boiler Drains SC125B Sump Check Valve B K Industries 102-103 Boiler Drains
Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. Durable sonic welded thermo-plastic body. Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
Anderson Metals P60P Tube Sleeve B K Industries 102-004 Boiler Drains Kbi/King BDC-0500-S Ever Tuff
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
NDS 107 Standard Round Valve Box With Overlapping ICV Cover Anderson Metal 738103-12 Brass Pipe Fittings KBI/King BDC-0750-S Flowguard Gold Boiler Drains
Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 6", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. AMC Pipe Coupling, 3/4 in Nominal Size, FPT, Brass High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
B K Industries 102-104 Boiler Drains B and K Industries 102-703HN Boiler Drains B K Industries 102-053HN Quarter Master
Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61. Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
B and K 102-803HC Boiler Drains Anderson Metal 750068-0812 Brass Fittings B and K Industries 102-704HC Boiler Drains
Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18.
Anderson Metals 60P Tube Sleeve Anderson Metals 60P Tube Sleeve B and K Industries 102-054HN Quarter Master
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
B and K 102-804HC Boiler Drains NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve
Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards.
Mueller ProLine In-Line Check Valve Mueller ProLine Compact Pattern Standard Port Gate Valve Sta-Rite FP0026-6D-P2 Sump Pump Check Valve
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Double-threaded for use with 1-1/4" or 1-1/2" sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole.
B and K 102-033 Boiler Drains Mueller ProLine Compact Pattern Standard Port Gate Valve Genova 53067 Washer Hose Valve
For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Solvent welds directly to 1/2" CPVC tubing and adapts to female hose couplings. Most often used in conjunction with No.53056/530561 wing elbow to supply water to automatic washing machines. Bulk.
NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve B and K 102-013 Boiler Drains
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. 3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
Anderson Metals PLF 760 Compression Sleeve Mueller ProLine In-Line Check Valve Mueller ProLine Swing Check Valve
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Certified to NSF 61 requirements.
Anderson Metal 738103-16 Brass Pipe Fitting B and K 102-014 Boiler Drains VALVE CHCK ABS 1-1/4 RUB BOOT
AMC Pipe Coupling, 1 in Nominal Size, FPT, Brass 3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7. Rubber boot inlet and outlet. Full flow design, weighted flapper valve
Mueller ProLine Full Port Gate Valve VALVE CHCK ABS 1-1/2 RUB BOOT Anderson Metal 750064-08 Brass Compression Tee
Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Rubber boot inlet and outlet. Full flow design, weighted flapper valve UPC individually bagged.
SC150SRS Sump Check Valve SC125SRS Sump Check Valve Anderson Metal 50872-0402 Brass Compression Tee
Durable sonic welded thermo-plastic body. Durable sonic welded thermo-plastic body. UPC individually bagged.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
VALVE CHECK UNIV 1-1/4AND1-1/2 Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine Full Port Gate Valve
Includes one universal check valve and two adapters. Made from durable ABS plastic. High quality NItril-Bruna N seal. Fits all: 1-1/4 & 1-1/2 MPT & FPT. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.
Anderson Metals PLF 760 Compression Sleeve B and K 102-034 Boiler Drains NDS flo Control 1011 Reinforced Poppet Check Valve
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve NDS ProGuard Gate Valve NDS ProGuard Gate Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
Anderson Metals 60P Tube Sleeve Mueller ProLine Swing Check Valve Anderson Metal 738103-20 Brass Pipe Coupling
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Certified to NSF 61 requirements. AMC Pipe Coupling, 1-1/4 in Nominal Size, FPT, Brass
Wayne 66005-WYN Check Valve Mueller ProLine In-Line Check Valve Anderson Metals 750060-14 Compression Sleeve
1-1/2" pump thread with 1-1/4" or 1-1/2" pipe connection. Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750064-10 Brass Compression Fittings Mueller ProLine Full Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
UPC individually bagged. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Anderson Metals BG3 Compression Sleeve NDS 111BC Standard Round Valve Box With Overlapping ICV Cover Arrowhead Brass 221BCLD Boiler Drains
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Durable plastic construction with snap-in green plastic lid. No. RVB-1 - Top 6", Bottom 8". No. RVB-2 - Top 10", Bottom 13-1/8". CSA approved. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle.
Arrowhead Brass 222BCLD Boiler Drains Arrowhead Brass 223BCLD Boiler Drains Anderson Metals 730061-03 Compression Nut
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Sta-Rite Industries FP0026-10 Flotec Anderson Metals BG3 Compression Sleeve NDS ProGuard Gate Valve
Prevents water backflow into sump basin.  Accept 1-1/4" or 1-1/2" discharge lines.  Corrosion-resistant construction.  Non-threaded, in-line check valve with rubber sleeve and hose clamps. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS flo Control 1011 Reinforced Poppet Check Valve NDS flo Control 1001 Reinforced Poppet Check Valve NDS ProGuard Gate Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
Anderson Metal 738103-24 Brass Pipe Fitting Wayne 57028-001 Check Valve Kit With Rubber Boot and Metal Collars Legend Valve T-4350 Tube to Pipe Coupling
AMC Pipe Coupling, 1-1/2 in Nominal Size, FPT, Brass Includes: Two convertible fittings and four hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4" or 1-1/2" OD pipe. Bronze body and compression nut, stainless steel gripper ring.
Mueller ProLine Standard Port Gate Valve Mueller ProLine Full Port Gate Valve NDS flo Control 1011 Reinforced Poppet Check Valve
Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve Anderson Metals 60P Tube Sleeve Mueller 104-511 ProLine Anti-Siphon Frost Free Sillcock Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off.
Anderson Metal 750068-0806 Brass Fittings Anderson Metals 730061-04 Compression Nut Mueller ProLine Swing Check Valve
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Certified to NSF 61 requirements.
B & K 106-003NL Globe Valve Mueller ProLine Full Port Gate Valve Mueller 104-403 ProLine Frost Free Sillcock Valve
125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton.
Sharkbite U2008-0000LFA Straight Check Valve Mueller 104-513 ProLine Anti-Siphon Frost Free Sillcock Valve NDS ProGuard Gate Valve
General purpose spring check valve that prevents the reverse flow of water. Can be installed horizontally and vertically and can be connected in seconds to copper tubing, CTS, CPVC, and Pex. Instant push-fit connections for increase ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 150 degrees F (65 degrees C) (water). CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Mueller 104-404 ProLine Frost Free Sillcock Valve Anderson Metal 750068-0608 Brass Compression Fittings
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Legend Valve T-4300 Tube to Pipe Coupling Mueller ProLine Compact Pattern Standard Port Gate Valve Anderson Metal 750068-0808 Brass Compression Fittings
Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Mueller 104-519 ProLine Anti-Siphon Frost Free Sillcock Valve Mueller 104-405 ProLine Frost Free Sillcock Valve NDS Standard Rectangular Valve Box With Overlapping ICV Cover
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. 1/2'' MIP x 1/2'' Sweat. Heavy chrome plated brass, silver soldered construction. Notched flange for stable installation. Chrome plated casting and tube, lockshield, 3/4" hose thread outlet, heavy cast iron handle. Pipe threads comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, solder connections comply with ANSI B16.18. CSA certified ANSI/NSF 61-9. UPC Coded. Bulk handy carton. ICV valve box with overlapping cover, Black/Green.14 In. x 19 In.
Mueller 104-515 ProLine Anti-Siphon Frost Free Sillcock Valve Mueller 104-521 ProLine Anti-Siphon Frost Free Sillcock Valve Legend Valve T-4305 Tube to Pipe Coupling
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Legend Valve Tube to Pipe Coupling, Series: T-4305, 3/4 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems
Mueller 104-517 ProLine Anti-Siphon Frost Free Sillcock Valve Anderson Metals 730061-05 Compression Nut Anderson Metal 750064-14 Brass CompressionTee
CSA certified, meets ASSE standard 1019, chrome-plated body and tube, built-in lockshield, heavy-duty six-point cast-iron handle, threaded ends comply with ANSI b1.20.1, ANSI/NSF 61-9 certified, hose threads comply with ANSI B1.20.7, solder ends comply with ANSI B16.18, backflow preventer checks siphoning back into the water supply, automatically drains upon water shut off. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750068-0302 Brass Fittings Sharkbite U2016-0000LFA Straight Check Valve Legend Valve T-4320 Pipe Coupling
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. General purpose spring check valve that prevents the reverse flow of water. Can be installed horizontally and vertically and can be connected in seconds to copper tubing, CTS, CPVC, and Pex. Instant push-fit connections for increase ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 150 degrees F (65 degrees C) (water). Legend Valve Pipe Coupling, Series: T-4320, 3/4 in Nominal, IPS X MIP End, Copper, For All Potable Water Systems
Anderson Metal 750064-04 Brass Compression Fitting Anderson Metal 750068-1008 Brass Compression Fittings Legend Valve 313-209NL Tube to Pipe Adapter
UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Legend Valve Tube to Pipe Adapter, 3/4 X 1 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass
Sta-Rite FP212-257 Flotec Sewage Check Valves Mueller ProLine Standard Port Gate Valve Anderson Metals 730061-06 Compression Nut
Economy check valve with stainless steel hose clamp fittings. Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750068-0402 Brass Fitting Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine Swing Check Valve
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Certified to NSF 61 requirements.
Mueller 104-823HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-841HC ProLine Quarter Master Anti-Siphon Sillcock Valve NDS flo Control 1011 Reinforced Poppet Check Valve
1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back pressure. Reinforced Poppet.. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. KC-1500-S and KC-2000-S are UL recognized spa component.
NDS flo Control 1001 Reinforced Poppet Check Valve Mueller ProLine Full Port Gate Valve B & K 106-004NL Globe Valve
Made of High-Impact PVC type II material. 1/2 pound spring gives positive seal with no back  pressure. Reinforced Poppet. Designed for any system where back flow is not desired. Spas, swimming pools, industrial and irrigation. Complies with all applicable ASTM and ANSI standards. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. 125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Mueller 104-825HC ProLine Quarter Master Anti-Siphon Sillcock Valve
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton.
Legend Valve T-4300 Tube to Pipe Coupling Legend Valve T-4350 Tube to Pipe Coupling Legend 313-154NL Water Service Fitting
Legend Valve Tube to Pipe Coupling, Series: T-4300, 1 X 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems Bronze body and compression nut, stainless steel gripper ring. Bronze body and compression nut, stainless steel pipe gripper.
Legend Valve 313-280NL Tube to Pipe Adapter Mueller 104-827HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-845HC ProLine Quarter Master Anti-Siphon Sillcock Valve
Legend Valve Tube to Pipe Adapter, 1 X 3/4 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Legend Valve 313-214NL Pack Joint Union Mueller 104-829HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-847HC ProLine Quarter Master Anti-Siphon Sillcock Valve
Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. 1/2" MIP & 1/2" Sweat. Quarter turn ceramic cartridge. Drains automatically upon water shut off, if the hose is removed or open. Built-in backflow preventer checks siphoning back into water supply. Heavy chrome plated for appearance and corrosion protection. Notched flange allows stable installation on siding. Lead-free silver solder construction. 3/4" hose thread outlet. Pipe threads comply with ANSI B1.20.1; Hose threads comply with ANSI B1.20.7; Solder ends comply with ANSI B16.18. ASSE 1019-A approved;UPC, IAPMO, CSA certified. Certified to NSF 61.Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Legend Valve T-4305 Tube to Pipe Coupling Anderson Metal 750064-06 Brass Compression Fittings Frost King ACB80H Light Duty Air Conditioner Bracket
Legend Valve Tube to Pipe Coupling, Series: T-4305, 1 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems UPC individually bagged. Universal air conditioner metal support bracket installs completely from inside. Safe and easy to install. Secure and long lasting. Relieves stress on window. Rugged, all weather construction. Precision bubble level assures proper mounting angle.
Legend Valve T-4410 Tube Bend Anderson Metal 750068-0404 Brass Fitting Anderson Metal 750068-0606 Brass Fitting
Legend Valve Tube Bend, Series: T-4410, 90 deg, 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Mueller 104-849HC ProLine Quarter Master Anti-Siphon Sillcock Valve Mueller 104-851HC ProLine Quarter Master Anti-Siphon Sillcock Valve Legend Valve T-4300 Tube to Pipe Coupling
1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
Anderson Metal 750068-0604 Brass Fitting Anderson Metal 750068-0502 Brass Fittings Mueller 104 Anti-Siphon Frost Free Quarter Turn Sillcock Valve
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. 1/2" MPT and PEX connection. Easy quarter turn operation. IAPMO - ANSI/NSF-61 approved. Maximum 125 PSI working pressure. Chrome plated brass ball. Teflon seats. 60% copper alloy brass construction. 3/4" hose thread outlet. Large flow rate. Rust resistant handle. Pipe threads comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Certified to NSF61, ASSE 1019-A, IAPMO, CSA. Handy carton.
Mueller ProLine Swing Check Valve Mueller 104-795HC Frost Free Quarter Turn Sillcock Valve Anderson Metals 730061-08 Compression Nut
Certified to NSF 61 requirements. Mueller Sillcock Valve, Frost Free Quarter Turn, Series: 104, Push-Fit Inlet, 1/2 in Inlet, GHT Outlet, 1/2 in Outlet, 8 in Length Through Valve, 125 psi, Brass Body, Chrome Plated Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750068-0504 Brass Fittings Legend Valve 313-215NL Pack Joint Union Arrowhead 456-04LF Standard Frost Free Hydrant
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle.
Arrowhead 455-04LF Frost Free Hydrant Anderson Metal 750068-1012 Brass Fitting Mueller 104-797HC Frost Free Quarter Turn Sillcock Valve
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Mueller Sillcock Valve, Frost Free Quarter Turn, Series: 104, Push-Fit Inlet, 1/2 in Inlet, GHT Outlet, 1/2 in Outlet, 10 in Length Through Valve, 125 psi, Brass Body, Chrome Plated
Arrowhead 456-06LF Standard Frost Free Hydrant Arrowhead 455-06LF Frost Free Hydrant Arrowhead 456-10LF Standard Frost Free Hydrant
1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle.
Arrowhead 455-10LF Frost Free Hydrant Heat Controller AS080 Window Support Bracket Arrowhead 455-08LF Frost Free Hydrant
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. Manufactured from heavy gauge steel with a durable baked-on epoxy finish. Stainless steel hardware to resist weather  damage. Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw.
Arrowhead 456-08LF Standard Frost Free Hydrant NDS ProGuard Gate Valve NDS ProGuard Gate Valve
1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
Simmons SB Check Valve Mueller ProLine Full Port Gate Valve Legend Valve T-4433 Tube Bend
Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna 'N o-ring, stainless steel spring, washer and locknut. All valves ?? through 1-1/2? have a working pressure of 400 PSI. All valves 2? and larger have a working pressure of 600 PSI. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Legend Valve Tube Bend, Series: T-4433, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems
Arrowhead 455-12LF Frost Free Hydrant Arrowhead 456-12LF Standard Frost Free Hydrant Simmons SB Check Valve
Heavy pattern brass construction with satin/nickel weather protection coating. 1-piece O-ring bonnet (no packing nut) and green coated oval handle with stainless steel screw. 1/2" MIP & 1/2" Sweat. Solid flange permits easy anchoring to frame buildings. Constructed of all brass and type L copper, 1-piece O-ring bonnet & rubber coated oval handle. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna 'N o-ring, stainless steel spring, washer and locknut. All valves ?? through 1-1/2? have a working pressure of 400 PSI. All valves 2? and larger have a working pressure of 600 PSI.
Mueller ProLine Compact Pattern Standard Port Gate Valve SILLCOCK FROST FREE 1/2X8IN L Simmons SB Check Valve
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna 'N o-ring, stainless steel spring, washer and locknut. All valves ?? through 1-1/2? have a working pressure of 400 PSI. All valves 2? and larger have a working pressure of 600 PSI.
Anderson Metal 750064-05 Brass Compression Tee Legend 313-155NL Water Service Fitting SILLCOCK 1/2X10IN L
SILLCOCK 1/2X10IN L
Our Price: $37.31
UPC individually bagged. Bronze body and compression nut, stainless steel pipe gripper.
Anderson Metals 750061-14 Compression Nut Legend Valve 313-220NL Pack Joint Union Legend Valve 313-244NL Pack Joint Union
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Legend Valve Pack Joint Union, 1 X 3/4 in Nominal, CTS X CTS End, Brass/Copper Legend Valve Pack Joint Union, 3/4 in Nominal, IPS X IPS End, Copper
DuraHeat TT-15S Single Burner Tank Top Heater Legend Valve T-4411 Tube Bend Frost King ACB160H Air Conditioner Bracket
Heavy steel construction. Outdoor heaters are the perfect solution to cold weather work and play!  They attach easily to a standard 20lb LP cylinder. (CYLINDER NOT INCLUDED) to provide instant infra-red heat. Includes adjustable control valve and CSA Certified safety tip function on CSA models. 9 -13-15,000 BTU's. Match light. Legend Valve Tube Bend, Series: T-4411, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems Universal air conditioner metal support bracket installs completely from inside. Safe and easy to install. Secure and long lasting. Relieves stress on window. Rugged, all weather construction. Precision bubble level assures proper mounting angle.
Legend Valve 313-384NL Pack Joint Tee Arrowhead 425-08LF Anti-Siphon Frost Free Hydrant Legend Valve T-4410 Tube Bend
Legend Valve Pack Joint Tee, 3/4 in Nominal, CTS X MIP End, Copper Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. Legend Valve Tube Bend, Series: T-4410, 90 deg, 1 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems
Arrowhead 425-10LF Anti-Siphon Frost Free Hydrant Watts LF7R Dual In-Line Check Valve Arrowhead 425-12LF Anti-Siphon Frost Free Hydrant
Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed. 2 check valves in one assembly to protect the primary water system (city water supply) by providing containment at the water meter. Prevents polluted water from entering the potable water supply system by preventing the reverse flow of water into supply lines. Cast bronze body and brass union inlet connection. Check subassemblies constructed with molded body seats, spring guides and poppets; stainless steel springs, silicone rubber seat discs and Buna-N O-rings. Features integral vacuum breaker with vandal-resistant vented cap. Backflow preventer, rubber coated green oval handle to help battle corrosion with stainless steel screw. 1-piece O-ring bonnet (no more packing). Internal check valve is springless and works with water pressure. ASSE 1019 and IAPMO listed.
B & K 106-002NL Globe Valve Heat Controller AS160 Window Support Bracket Anderson Metal 750068-1412 Brass Compression Fittings