Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > GAS HEATER ACCESSORIES
Sort By:
1
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve B and K Industries 888-221RP Bleeder Caps
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Fits most drainable valves. 3 styles of caps with washers included.
BrassCraft 294F Half Union Adapter Anderson Metal 750097-0604 Brass Flare  Adapter Anderson 750066-0606 3-Piece Tubing Coupling
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Anderson Tube Adapter, 1/4 x 3/8 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson 750066-0302 3-Piece Reducing Tubing Coupling BrassCraft 293M Half Union Adapter BrassCraft MAU1-10-8 Gas Adapter
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
BrassCraft MAU2-10-8 Gas Adapter Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Mueller ProLine Quarter Turn Ball Valve BrassCraft PSSL-14 Gas Dryer Adapter Mueller ProLine Quarter Turn Ball Valve
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
BrassCraft PSSC-62 Gas Supply Adapter FITTING ADAPTER GAS 3/8IN MIP Celcon SFT-0500-T Hose Bibb
For corrugated tube. Recommended for gas range connections. 3/8" OD Flare x 3/8" MIP tapped 1/8 FIP. For use with gas appliances. Bronze colored body with black t-handle. Santoprene seal for chemical resistance. For use in hot or cold fluid systems up to 180 degrees Fahrenheit. Complies with all applicable ASTM and ANSI standards.
BrassCraft PSSC-66 Gas Supply Adapter BrassCraft PSSL-16 Gas Supply Union Brass-Craft FU3-6 Pipe Union
For corrugated tube. Recommended for gas range connections. For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
KBI SWL-0500-T Stop and Waste Valve Brass-Craft PSSC-63 Male Half Union BrassCraft MAU1-10-12 Gas Adapter
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
BrassCraft MAU2-10-12 Gas Adapter KBI SWL-0750-T Stop and Waste Valve Mueller 107-342NL Full Port Ball Valve
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Brass-Craft PSSL-15 Female Pipe Union BrassCraft 2294M Half Union Adapter Brass-Craft PSSC-64 Male Half Union
For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP.
Brass-Craft PSSD-43 Male Half Union Mueller ProLine Quarter Turn Ball Valve BrassCraft PSSD-42 Gas Supply Union
For 3/8'' ID (1/2'' OD) corrugated tube. Recommended for fixed air heater, gas range, furnace, and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8'' FIP thread. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. For 3/8'' I.D. (1/2'' OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces, and water heater connections. Use with PlumbShop SD or RSD Series connectors.
BrassCraft M40-10 Gas Tube Cap Anderson Metal 750097-0806 Brass Adapter Anderson 750066-0406 3-Piece Tubing Coupling
For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures. Up to 1/2 psi maximum. Anderson Tube Adapter, 1/2 x 3/8 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Anderson Metal 750065-05 Brass Compression Elbow
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. UPC individually bagged.
B & K 102-303 No-Kink Hose Bibb Mueller ProLine Quarter Turn Ball Valve B & K 102-403 No-Kink Hose Bibb
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
B & K 102-304 No-Kink Hose Bibb B & K QuarterMaster No-Kink Hose Bibb Anderson 54840-06 Space Heater Tube Cap
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
Anderson 50869-0402 Tube Elbow Genova 500 Line Valve B & K 103-003 Hose Bibb
UPC individually bagged. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2" and 3/4" CPVC tubing (Requires couplings for attaching to 3/4" tubing). Bulk. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
B & K 103-003 Hose Bibb B & K 102-404 No-Kink Hose Bibb B & K QuarterMaster No-Kink Hose Bibb
3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
B&K Proline Stop and Waste Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
B & K QuarterMaster No-Kink Hose Bibb Mueller ProLine Quarter Turn Ball Valve B & K QuarterMaster No-Kink Hose Bibb
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
Mueller ProLine Quarter Turn Solvent Ball Valve B & K QuarterMaster Hose Bibb Mueller ProLine Full Port Ball Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson 54806-0606 Tube To Pipe Coupling B & K 103-013 Hose Bibb BIBB HOSE MULTI-TURN 1/2IN
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Mueller ProLine Quarter Turn Ball Valve B & K 103-014 Hose Bibb Mueller ProLine Full Port Ball Valve
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
B & K QuarterMaster Hose Bibb BIBB HOSE MULTI-TURN 3/4IN    Mueller ProLine Quarter Turn Ball Valve
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
Apollo APXV1212 Quarter Turn Ball Valve B&K Proline Stop and Waste Valve Mueller ProLine Full Port Ball Valve
Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve B&K Proline Stop and Waste Valve Mueller ProLine Full Port Ball Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve B&K Proline Stop and Waste Valve
Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61.
Mueller ProLine Full Port Ball Valve Anderson 54800-06 Space Heater Tube Nut B&K Proline Stop and Waste Valve
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. 9/16-24 thread. Bagged with flag tag. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61.
Mueller ProLine Quarter Turn Solvent Ball Valve B&K Proline 7700 Full Port Solder Ball Valve VALVE GARDEN 1/2IN
VALVE GARDEN 1/2IN
Our Price: $10.81
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
BIBB HOSE QTR TURN 90DEG 1/2IN Mueller ProLine Quarter Turn Ball Valve B & K 103-023 Hose Bibb
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
VALVE BALL 1-1/2IN S80 SOLVENT B&K Proline Stop and Waste Valve Mueller ProLine Full Port Ball Valve
Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included.
Mueller ProLine Full Port Ball Valve VALVE GARDEN 3/4IN            STOP VALVE W/DRAIN 1/2IN
VALVE GARDEN 3/4IN
Our Price: $11.78
STOP VALVE W/DRAIN 1/2IN
Our Price: $11.78
200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Apollo APXV3434 Quarter Turn Ball Valve VALVE BALL 1/2IN F1960
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807
Anderson Metal 730081-04 Brass Compression Cap HOSE BIBB QTR TURN 1/2IN      B&K Proline 7700 Full Port Ball Valve
HOSE BIBB QTR TURN 1/2IN
Our Price: $12.20
UPC individually bagged. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve HOSE BIBB QTR TURN 3/4IN      BIBB HOSE QTR TURN 90DEG 3/4IN
HOSE BIBB QTR TURN 3/4IN
Our Price: $12.43
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
STOP VALVE W/DRAIN 3/4IN      Anderson Metal 730081-06 Brass Compression Fitting Mueller ProLine Full Port Ball Valve
STOP VALVE W/DRAIN 3/4IN
Our Price: $12.89
UPC individually bagged. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
Arrowhead 253 No-Kink Hose Bibb Arrowhead 353 No-Kink Hose Bibb Arrowhead 351 No-Kink Hose Bibb
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Arrowhead 301 Standard Hose Bibb Mueller ProLine Full Port Ball Valve VALVE BALL 3/4IN F1960
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
Anderson Metal 750086-0610 Brass Compression Adapter Arrowhead 302 Standard Hose Bibb B & K 103-024 Hose Bibb
Use with copper, aluminum, or plastic tubing for water, gas, oil, and vacuum lines in a -65 to 250-degree temperature range. Easy to disassemble, no flaring tool required. UPC individually bagged. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
Anderson Metal 738106-161612 Brass Pipe Fitting B&K Proline 7700 Full Port Solder Ball Valve Anderson 54806-0608 Tube To Pipe Coupling
Anderson Pipe Reducing Tee, 1 x 1 x 3/4 in Nominal Size, IPT, Brass -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged.
Anderson Metal 54808-0606 Flare Tube Fittings Mueller ProLine Full Port Ball Valve Anderson Metal 750065-04 Brass Compression Elbow
9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. UPC individually bagged.
Mueller ProLine Full Port Ball Valve Arrowhead 201 Shank-On Thread Hose Bibb SharkBite 22222-0000LF 1-Piece Full Port In-Line Ball Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
VALVE BALL SHARKBITE BRS 1/2IN Mueller ProLine Full Port Ball Valve Anderson Metal 54808-0608 Flare Tube Fittings
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
NDS WSU-1520-S Full Port Pool Diverter Single Union Ball Valve Arrowhead 202 Shank-On Thread Standard Hose Bibb B&K Proline 7700 Full Port Ball Valve
Full port design, preset at 5 psi or 12 feet of head and can be adjusted to 14 psi or 32 feet of head, combination of 1-1/2" socket and 2" spigot on each end can be used on both sizes of pipe, single union design for easy serviceability, EPDM o-ring, meets/exceeds ASTM & Ansi STANDARDS. Bulk. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Anderson 750066-0806 3-Piece Reducing Tubing Coupling Mueller ProLine Full Port Ball Valve
200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
BASE M SERIES HEATER 20K - 30K Anderson Metal 730081-08 Brass Compression Cap SharkBite 22185-0000LF 1-Piece Full Port In-Line Ball Valve
Procom PF09B Heater Bases
Our Price: $20.60
Used for floor mounting all Procom heaters that produce more than 10,000 BTU?s of heat. UPC individually bagged. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
VALVE BALL SHARKBITE BRS 3/4IN B&K Proline 7700 Full Port Ball Valve BALL VALVE SLIP 1/2IN
BALL VALVE SLIP 1/2IN
Our Price: $21.26
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline 7700 Full Port Solder Ball Valve Anderson 750066-0808 3-Piece Tubing Coupling BrassCraft FO-6 Tube Nut
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. 3/8" O.D. tube.
Anderson 750070-0606 Tube Elbow Mueller ProLine Full Port Ball Valve VALVE BALL 1IN F1960
UPC individually bagged. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
Anderson Metal 750065-06 Brass Compression Fitting Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
UPC individually bagged. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included.
World Marketing 24-3508 Thermocouple Anderson 750066-1008 3-Piece Tubing Coupling Mueller ProLine Full Port Ball Valve
800mm. Fits all Kozy-World pre 2015 vent-free wall heaters. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson 750066-0402 3-Piece Reducing Tubing Coupling Mueller ProLine Full Port Ball Valve B&K Proline Ground Key Stop and Drain Valve
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2.
Anderson 750070-0608 Reducing Tube Elbow BALL VALVE SLIP 3/4IN         B&K Proline Ground Key Stop and Drain Valve
BALL VALVE SLIP 3/4IN
Our Price: $26.50
UPC individually bagged. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2.
Anderson Metal 54844-06 Flare Tube Fitting Anderson 750069-0404 Tube Elbow Anderson 750069-0806 Tube Elbow
9/16''-24 fine thread flare end for space heaters. UPC individually bagged. UPC individually bagged. UPC individually bagged.
BLOWER VENT FREE  FITS ALL2016 VALVE BALL BRASS 1INX1IN      Anderson 750069-0604 Reducing Tube Elbow
Replacement Fan Assembly for the 20,000 BTU through 30,000 BTU - Mr. Heater  - Vent Free Heaters 2016 & UP. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). UPC individually bagged.
Anderson 750066-0404 3-Piece Tubing Coupling Anderson Metal 750069-0402 Brass Fittings Anderson Metal 730081-10 Brass Compression Cap
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged. UPC individually bagged.
Mueller ProLine Full Port Ball Valve Anderson 750066-0604 3-Piece Reducing Tubing Coupling Anderson 750069-0808 Tube Elbow
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged.
Anderson Metal 757422-1204 Brass Compression Adapter Anderson 750066-0608 3-Piece Tubing Coupling Mueller ProLine Full Port Ball Valve
UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson Metal 750065-08 Brass Compression Elbow Mueller ProLine Full Port Ball Valve Anderson 750066-0504 3-Piece Reducing Tubing Coupling
UPC individually bagged. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson 750066-1012 3-Piece Tubing Coupling Anderson 750069-0606 Tube Elbow World Marketing 20-7010 Gas Install Kit
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged. Gas Appliance Installation Kit.  Includes 1/2" Gas Flex Connection 24", 3/8" & 1/2" Adapter Fittings, Pipe Sealant.  For Kozy- World, GloWarm, Comfort Glo, and gas heater and fireplace installation.
BLOWER M SERIES HEATERS       Anderson 750069-1008 Reducing Tube Elbow Anderson Metal 750065-10 Brass Compression Fittings
For use with all Procom heaters that produce more than 10,000 BTU?s of heat.  It offers either manual or thermostatic control, and does require electricity. UPC individually bagged. UPC individually bagged.
Anderson 750069-0406 Tube Elbow Anderson 750069-0608 Tube Elbow Anderson 54748-1508 Tube To Pipe Connector
UPC individually bagged. UPC individually bagged. 15/16''-16 thread for brass range connectors. UPC individually bagged.
Anderson 750066-1412 3-Piece Tubing Coupling Anderson 750066-0812 3-Piece Tubing Coupling Anderson Metal 738106-121208 Brass Pipe Fitting
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Anderson Pipe Reducing Tee, 3/4 x 3/4 x 1/2 in Nominal Size, IPT, Brass
Anderson 54746-1508 Tube To Pipe Coupling Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson 54748-1512 Tube To Pipe Connector Anderson 54746-1512 Tube To Pipe Coupling Anderson 750069-0408 Tube Elbow
15/16''-16 thread for brass range connectors. UPC individually bagged. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. UPC individually bagged.
Anderson 750066-1408 3-Piece Reducing Tubing Coupling Anderson Metal 750065-14 Brass Compression Elbow A/C ROOM 5K BTU 115V NO REMOTE
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged. Electro-mechanical seven-position control for easy temperature selection. Adjustable thermostat from minimal cooling to maximum cooling. Easy to access, slide-out washable filter. Adjustable air direction, compact, lightweight cabinet with attractive decorator front grille. 11.1/11.0 EER/CEER. 115-Volt 60 Hz power supply. 136 CFM air delivery. 2/2 Fan motor speed. 4.0 Amps Cooling. Size: 12"H x 16"W x 15-7/16"D.
A/C ROOM 6K BTU 115V W/REMOTE A/C ROOM 8K BTU 115V W/REMOTE A/C ROOM 10K BTU 115V W/REMOTE
Electronic controls with full feature remote. Adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment, 24-hour on/off timer and auto restart. Energy saver function; auto, dehumidification and sleep modes. Energy Star Rated. RADS-61M: 11.2/11.0 EER/CEER; RADS-81M and RADS101M; 11.3/11.2 EER/CEER. Electronic controls with full feature remote. Adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment, 24-hour on/off timer and auto restart. Energy saver function; auto, dehumidification and sleep modes. Energy Star Rated. RADS-61M: 11.2/11.0 EER/CEER; RADS-81M and RADS101M; 11.3/11.2 EER/CEER. Electronic controls with full feature remote. Adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment, 24-hour on/off timer and auto restart. Energy saver function; auto, dehumidification and sleep modes. Energy Star Rated. RADS-61M: 11.2/11.0 EER/CEER; RADS-81M and RADS101M; 11.3/11.2 EER/CEER.
PORTABLE A/C 8K BTU W/REMOTE  A/C ROOM 12K BTU 115V W/REMOTE PORTABLE A/C 12K BTU
Cool a room without any  ductwork or special wiring. Moves from room to room where temporary cooling is needed. Includes cooling, dehumidification and air circulation modes, moves with casters and built-in handles.Single hose effectively removes exhaust hot air and brings in fresh air. Unit disposes of its own condensate under most conditions. No bucket to empty. Auto stop protects against overflow. Washable/reusable air filter. Adjustable louvers, electronic controls have soft-touch keypad and wireless remote included. 24-hour on/off timer. Auto restart with 3 minute time delay reverts to last setting following a power outage. Sliding adapters fit a variety of window sizes (double-hung and casement) and some patio doors. Dual flexible hoses are 48" long. Hose hook-up is not needed for air circulation (fan only) mode. 8.9 EER. 115V-1-60. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated. Cool a room without any  ductwork or special wiring. Moves from room to room where temporary cooling is needed. Includes cooling, dehumidification and air circulation modes, moves with casters and built-in handles.Single hose effectively removes exhaust hot air and brings in fresh air. Unit disposes of its own condensate under most conditions. No bucket to empty. Auto stop protects against overflow. Washable/reusable air filter. Adjustable louvers, electronic controls have soft-touch keypad and wireless remote included. 24-hour on/off timer. Auto restart with 3 minute time delay reverts to last setting following a power outage. Sliding adapters fit a variety of window sizes (double-hung and casement) and some patio doors. Dual flexible hoses are 48" long. Hose hook-up is not needed for air circulation (fan only) mode. 8.9 EER. 115V-1-60.
A/C-HEAT ROOM 8K-3.5K BTU 115V A/C WINDOW 15K BTU 115V W/RMT A/C-HEAT ROOM 12K BTU 220 VOLT
Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated. Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off.
A/C & HEAT PORTABLE 14000 BTU A/C ROOM 18K BTU 230V W/REMOTE A/C-HEAT ROOM 18.5K BTU 230 V
Cool/Heat/Fan. Cool or heat a room without ductwork or special wiring. Ideal wherever temporary cooling or heating is needed. Built-in condensate disposal. Automatic louver swing 48? single hose for fast installation. Washable filter, 24-hour on/off timer, auto restart. ASHRAE Standard 128-2001. Cools: 550-700 Sq. Ft. EER 8.9, power supply 115V ? 60Hz. Amps Cooling 13.8. Air delivery Max. CFM 297. Power cord 15A parallel NEMA 5-15P. Dimensions; 30-1/8"H x 18-7/16"W x 15-5/8"D. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated. Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off.
A/C WINDOW 25K BTU 230V W/RMT A/C-HEATER WINDOW 220 VOLTS   Heat Controller SMH09SC-0-25-KIT Ductless Mini-Split Air Conditioner
Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated. Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off. Comfort-Aire by Heat Controller. 9,000  or 12,000 BTU Cooling + Heat models 110V. Ready to install kits. Include 1 each outdoor condenser, Indoor air handler, 25ft insulated line set, 30ft communication wire, and surge protector. Whisper quiet, high tech fan in the indoor unit delivers balanced air flow. 24- hour timer and turbo mode. Auto Operation - Automatically adjusts to maintain a constant temperature/humidity level. Air filter helps trap dust, pollen and other particles in the air; this permanent filter is designed to be washed on a regular basis and re-installed. Auto Restart - Reverts to the last setting following a power failure. Low Ambient Operation - Crankcase heater allow operation at 5 degree F (cooling). Includes a fully featured wireless remote.
Heat Controller PTAC EKTC09-1G-3-KIT Air Conditioner Kit Heat Controller PTAC EKTC12-1G-3-KIT Air Conditioner Kit Heat Controller SMH12SC-0-25-KIT Ductless Mini-Split Air Conditioner
Comfort-Aire by Heat Controller, for applications in hotels, motels, apartments, nursing homes, office buildings and schools. Front desk control and electronic temperature limiter prevent over-heating and over-cooling. LED display and touchpad buttons. Designed with innovative and universal components, including standard 16" x 42" chassis, for installation. 9,000  or 12,000 BTU Cooling + Heat models 220V. "Ready to Install Kits" include 1 each PTAC unit, power cord for 3kw heat, uninsulated wall sleeve, and exterior grille. Comfort-Aire by Heat Controller, for applications in hotels, motels, apartments, nursing homes, office buildings and schools. Front desk control and electronic temperature limiter prevent over-heating and over-cooling. LED display and touchpad buttons. Designed with innovative and universal components, including standard 16" x 42" chassis, for installation. 9,000  or 12,000 BTU Cooling + Heat models 220V. "Ready to Install Kits" include 1 each PTAC unit, power cord for 3kw heat, uninsulated wall sleeve, and exterior grille. Comfort-Aire by Heat Controller. 9,000  or 12,000 BTU Cooling + Heat models 110V. Ready to install kits. Include 1 each outdoor condenser, Indoor air handler, 25ft insulated line set, 30ft communication wire, and surge protector. Whisper quiet, high tech fan in the indoor unit delivers balanced air flow. 24- hour timer and turbo mode. Auto Operation - Automatically adjusts to maintain a constant temperature/humidity level. Air filter helps trap dust, pollen and other particles in the air; this permanent filter is designed to be washed on a regular basis and re-installed. Auto Restart - Reverts to the last setting following a power failure. Low Ambient Operation - Crankcase heater allow operation at 5 degree F (cooling). Includes a fully featured wireless remote.
Rheem / Richmond RMTGH-95DVLN Water Heater Rheem / Richmond RMTGH-95DVLP Water Heater Rheem / Richmond RMTGH-95XLN Water Heater