Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > GAS HEATERS - DUAL FUEL
Sort By:
1
Anderson Metal 730561-05 Brass Compression Fitting Anderson Metal 730561-08 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 730561-10 Brass Compression Fitting Legend 313-404 Water Service Fitting Legend 313-405 Water Service Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Recommended on all flexible plastic connections Recommended on all flexible plastic connections
Anderson Metal 730561-06 Brass Compression Adapter Insert Anderson Metals 50868-0402 Tube Adapter Legend 313-414 Water Service Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. UPC individually bagged. Recommended on all flexible plastic connections.
Anderson Metal 750068-0602 Brass Fitting Legend 313-406 Water Service Fitting Anderson Metals 730061-10 Compression Nut
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Recommended on all flexible plastic connections. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750068-0406 Brass Fittings Anderson Metal 756101-02 Brass Pipe Tee Anderson Metal 750068-0408 Brass Fittings
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2  turns past finger tight. Female pipe three ends. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Anderson Metal 738101-06 Brass Pipe Fitting Anderson Metal 738101-04 Brass Pipe Fitting EZ-Flo 20371 Angle Radiator Air Valve
Anderson Pipe Tee, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Tee, 1/4 in Nominal Size, FPT, Brass 1/8" angle MIP. Maximum operating pressure 5 PSI. Maximum pressure 10 PSI.
Anderson Metal 738101-08 Brass Pipe Fitting Plumb Pak PP25502LF Saddle Valve Anderson Metal 750068-0812 Brass Fittings
Anderson Pipe Tee, 1/2 in Nominal Size, FPT, Brass 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Plumb Pak PP855-2LF Saddle Valve Anderson 7104SCSD Self-Tapping Saddle Valve Anderson 759103-0402 Angle Needle Shut-Off Valve
1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe. For use with copper tubing. Can be installed while line is under pressure. Valve has 1/4" compression connection and clamp will fit 3/8" thru 1-3/8" O.D. copper tubing. Includes valve, saddle, nuts, screws and washer. PIERCE PIN SHOWN IN CLOSED POSITION. Bagged. Anderson Needle Shut-Off Valve, Angle, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body, Chrome Plated Finish
Anderson 759106-04 Straight Needle Shut-Off Valve Anderson Metal 738101-12 Brass Pipe Fittings Anderson Metal 750064-08 Brass Compression Tee
Anderson Needle Shut-Off Valve, Straight, 1/4 in Nominal, Compression X Compression End, Brass Body Anderson Pipe Tee, 3/4 in Nominal Size, FPT, Brass UPC individually bagged.
Anderson Metal 50872-0402 Brass Compression Tee B & K ProLine Straight Radiator Steam Vent B & K ProLine Straight Radiator Steam Vent
UPC individually bagged. Non-vacuum float style. Non-vacuum float style.
EZ-Flo 20378 Adjustable Angle Radiator Air Valve Anderson 50873-0402 Needle Valve Anderson 759101-0402 Straight Needle Shut-Off Valve
1/8" angle MIP. Maximum operating pressure 1-1/2 PSI. Maximum pressure 10 PSI. Anderson Needle Valve, 1/4 X 1/8 in Nominal, Plastic X Male Pipe End, -65 TO 250 deg F, Brass Body Anderson Needle Shut-Off Valve, Straight, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body
Anderson 759106-06 Straight Needle Shut-Off Valve Anderson Metal 750064-10 Brass Compression Fittings Anderson 7104SC Saddle Valve Kit
Anderson Needle Shut-Off Valve, Straight, 3/8 in Nominal, Compression X Compression End, Brass Body UPC individually bagged. For installing automatic ice maker kits on refrigerators. Kit includes angle needle valve designed to control accurate water flow into evaporative cooler units, plus a saddle clamp that permits installation in water pipe nearest humidifier unit. Furnished complete with copper tube insert and gasket. Cadmium plated clamps and bolts. Saddle clamp made to fit 3/8", 1/2" and 3/4".
Anderson Metal 738101-16 Brass Pipe Fitting Anderson Metals 730061-03 Compression Nut Legend Valve T-4350 Tube to Pipe Coupling
Anderson Pipe Tee, 1 in Nominal Size, FPT, Brass Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Bronze body and compression nut, stainless steel gripper ring.
B & K 109-304 Angle Steam Radiator Valve Anderson Metal 750068-0806 Brass Fittings Anderson Metals 730061-04 Compression Nut
Low pressure steam or circulated, hot water systems. 15 PSI, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 754044-04 Brass Flare Tee Anderson Metal 750068-0608 Brass Compression Fittings Legend Valve T-4300 Tube to Pipe Coupling
UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
Anderson Metal 750068-0808 Brass Compression Fittings Legend Valve T-4305 Tube to Pipe Coupling Anderson Metals 730061-05 Compression Nut
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Legend Valve Tube to Pipe Coupling, Series: T-4305, 3/4 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
B & K 109-305 Angle Steam Radiator Valve Anderson Metal 750064-14 Brass CompressionTee Anderson Metal 750068-0302 Brass Fittings
Low pressure steam or circulated, hot water systems. 15 PSI, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel. UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Legend Valve T-4320 Pipe Coupling Anderson Metal 750064-04 Brass Compression Fitting Anderson Metal 750068-1008 Brass Compression Fittings
Legend Valve Pipe Coupling, Series: T-4320, 3/4 in Nominal, IPS X MIP End, Copper, For All Potable Water Systems UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Legend Valve 313-209NL Tube to Pipe Adapter Anderson Metals 730061-06 Compression Nut Anderson Metal 750068-0402 Brass Fitting
Legend Valve Tube to Pipe Adapter, 3/4 X 1 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Legend Valve T-4300 Tube to Pipe Coupling Legend Valve T-4350 Tube to Pipe Coupling Legend 313-154NL Water Service Fitting
Legend Valve Tube to Pipe Coupling, Series: T-4300, 1 X 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems Bronze body and compression nut, stainless steel gripper ring. Bronze body and compression nut, stainless steel pipe gripper.
Legend Valve 313-280NL Tube to Pipe Adapter Anderson Metal 738101-02 Brass Pipe Tee Anderson Metal 754044-06 Brass Flare Tee
Legend Valve Tube to Pipe Adapter, 1 X 3/4 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass Anderson Pipe Tee, 1/8 in Nominal Size, FPT, Brass UPC individually bagged.
Anderson Metal 754044-05 Brass Flare Fitting Legend Valve 313-214NL Pack Joint Union B & K 109-306 Angle Steam Radiator Valve
UPC individually bagged. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. Low pressure steam or circulated, hot water systems. 15 PSI, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel.
Legend Valve T-4305 Tube to Pipe Coupling Anderson Metal 750064-06 Brass Compression Fittings Legend Valve T-4410 Tube Bend
Legend Valve Tube to Pipe Coupling, Series: T-4305, 1 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems UPC individually bagged. Legend Valve Tube Bend, Series: T-4410, 90 deg, 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems
Anderson Metal 750068-0404 Brass Fitting Anderson Metal 750068-0606 Brass Fitting Legend Valve T-4300 Tube to Pipe Coupling
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
Anderson Metal 750068-0604 Brass Fitting Anderson Metal 750068-0502 Brass Fittings Anderson Metals 730061-08 Compression Nut
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750068-0504 Brass Fittings Legend Valve 313-215NL Pack Joint Union Anderson Metal 750068-1012 Brass Fitting
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Anderson Metal 754044-08 Brass Flare Tee Legend Valve T-4433 Tube Bend Anderson Metal 750064-05 Brass Compression Tee
UPC individually bagged. Legend Valve Tube Bend, Series: T-4433, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems UPC individually bagged.
Legend 313-155NL Water Service Fitting Anderson Metals 750061-14 Compression Nut Legend Valve 313-220NL Pack Joint Union
Bronze body and compression nut, stainless steel pipe gripper. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Legend Valve Pack Joint Union, 1 X 3/4 in Nominal, CTS X CTS End, Brass/Copper
Anderson Metal 754059-080806 Brass Flare Tee Legend Valve 313-244NL Pack Joint Union Legend Valve T-4411 Tube Bend
UPC individually bagged. Legend Valve Pack Joint Union, 3/4 in Nominal, IPS X IPS End, Copper Legend Valve Tube Bend, Series: T-4411, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems
Legend Valve 313-384NL Pack Joint Tee Legend Valve T-4410 Tube Bend Anderson Metal 750068-1412 Brass Compression Fittings
Legend Valve Pack Joint Tee, 3/4 in Nominal, CTS X MIP End, Copper Legend Valve Tube Bend, Series: T-4410, 90 deg, 1 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Anderson Metal 754059-060608 Brass Flare Fitting Legend Valve T-4411 Tube Bend Legend Valve 313-434NL Compression Tee
UPC individually bagged. Legend Valve Tube Bend, Series: T-4411, 90 deg, 1 in Nominal, CTS End, Copper, For All Potable Water Systems Legend Valve Compression Tee, 3/4 in Nominal, CTS End, Copper
Legend Valve T-4413 Pipe Elbow Anderson Metal 750068-1408 Brass Fitting Legend Valve 313-394NL Pack Joint Tee
Legend Valve Pipe Elbow, Series: T-4413, 3/4 in Nominal, IPS End, 90 deg, Copper, For All Potable Water Systems Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Legend Valve Pack Joint Tee, 3/4 in Nominal, CTS End, Copper
Anderson Metal 754045-0808 Brass Flare  Tee Anderson Metal 754044-10 Brass Flare Fitting Anderson Metal 750068-0506 Brass Fitting
UPC individually bagged. UPC individually bagged. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Legend Valve 313-395NL Pack Joint Tee Legend Valve 313-390NL Pack-Joint Pipe Tee Legend Valve 313-435NL Compression Tee
Legend Valve Pack Joint Tee, 1 in Nominal, CTS End, Copper Legend Valve Pipe Tee, Pack-Joint, 3/4 in Nominal, IPS End, Copper Legend Valve Compression Tee, 1 in Nominal, CTS End, Copper
A/C ROOM 5K BTU 115V NO REMOTE HEATER BLUE FLAME DUAL FUEL10K HEATER INFRARED DUAL FUEL 10K
Electro-mechanical seven-position control for easy temperature selection. Adjustable thermostat from minimal cooling to maximum cooling. Easy to access, slide-out washable filter. Adjustable air direction, compact, lightweight cabinet with attractive decorator front grille. 11.1/11.0 EER/CEER. 115-Volt 60 Hz power supply. 136 CFM air delivery. 2/2 Fan motor speed. 4.0 Amps Cooling. Size: 12"H x 16"W x 15-7/16"D. Utilizes either Natural Gas or Liquid Propane. With the addition NextGen Valve, once the energy source is connected to the appropriate inlet, the unit will do all calibrations for the energy source internally. Thermostatic temperature control and updated cabinet design. MGT20BF & MGT30BF - compatible with Procom Heating?s Internal Blower or Base Feet accessories. Utilizes either Natural Gas or Liquid Propane.  With the addition NextGen Valve, once the energy source is connected to the appropriate inlet, the unit will do all calibrations for the energy source internally. Thermostatic temperature control and updated cabinet design. MG2TIR & MG3TIR - compatible with Procom Heating?s Internal Blower or Base Feet accessories.
Ariston GL Glass Lined Electric Water Heater HEATER BLUE FLAME DUAL FUEL20K HEATER INFRARED DUAL FUEL 20K
Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure. Utilizes either Natural Gas or Liquid Propane. With the addition NextGen Valve, once the energy source is connected to the appropriate inlet, the unit will do all calibrations for the energy source internally. Thermostatic temperature control and updated cabinet design. MGT20BF & MGT30BF - compatible with Procom Heating?s Internal Blower or Base Feet accessories. Utilizes either Natural Gas or Liquid Propane.  With the addition NextGen Valve, once the energy source is connected to the appropriate inlet, the unit will do all calibrations for the energy source internally. Thermostatic temperature control and updated cabinet design. MG2TIR & MG3TIR - compatible with Procom Heating?s Internal Blower or Base Feet accessories.
Ariston GL Glass Lined Electric Water Heater HEATER BLUE FLAME DUAL FUEL30K Richmond 6EP2-1 Electric Water Heater
Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure. Utilizes either Natural Gas or Liquid Propane. With the addition NextGen Valve, once the energy source is connected to the appropriate inlet, the unit will do all calibrations for the energy source internally. Thermostatic temperature control and updated cabinet design. MGT20BF & MGT30BF - compatible with Procom Heating?s Internal Blower or Base Feet accessories. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements.
HEATER INFRARED DUAL FUEL 30K A/C ROOM 6K BTU 115V W/REMOTE A/C ROOM 8K BTU 115V W/REMOTE
Utilizes either Natural Gas or Liquid Propane.  With the addition NextGen Valve, once the energy source is connected to the appropriate inlet, the unit will do all calibrations for the energy source internally. Thermostatic temperature control and updated cabinet design. MG2TIR & MG3TIR - compatible with Procom Heating?s Internal Blower or Base Feet accessories. Electronic controls with full feature remote. Adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment, 24-hour on/off timer and auto restart. Energy saver function; auto, dehumidification and sleep modes. Energy Star Rated. RADS-61M: 11.2/11.0 EER/CEER; RADS-81M and RADS101M; 11.3/11.2 EER/CEER. Electronic controls with full feature remote. Adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment, 24-hour on/off timer and auto restart. Energy saver function; auto, dehumidification and sleep modes. Energy Star Rated. RADS-61M: 11.2/11.0 EER/CEER; RADS-81M and RADS101M; 11.3/11.2 EER/CEER.
Richmond 6EP6-1 Electric Water Heater Richmond 6EP10-1 Electric Water Heater A/C ROOM 10K BTU 115V W/REMOTE
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Electronic controls with full feature remote. Adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment, 24-hour on/off timer and auto restart. Energy saver function; auto, dehumidification and sleep modes. Energy Star Rated. RADS-61M: 11.2/11.0 EER/CEER; RADS-81M and RADS101M; 11.3/11.2 EER/CEER.
Richmond 6EP20-1 Electric Water Heater WATER HEATER ELEC MED 40GAL   WATER HEATER ELEC TALL 40GAL
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC TALL 30GAL  WATER HEATER ELEC MED 30GAL   WATER HEATER ELEC SHORT 36GAL
0.92 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.90 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER ELEC SHORT 28GAL A/C ROOM 12K BTU 115V W/REMOTE WATER HEATER M-HOME ELEC 30GAL
0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated. 0.92 UEF. Heater features unique side mounted water connections for easier installation and the dual 4.500-watt heating elements provide fast recovery. Made to meet or exceed NAECA requirements
Richmond 6EP15-1 Electric Water Heater WATER HEATER ELEC TALL 50GAL  WATER HEATER ELEC MED 50GAL
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 0.93 Energy factor. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements.
WATER HEATER M-HOME ELEC 40GAL A/C-HEAT ROOM 8K-3.5K BTU 115V A/C WINDOW 15K BTU 115V W/RMT
0.95 Energy Factor. Heater features unique side mounted water connections for easier installation and the dual 4,500-watt heating elements provide fast recovery.  Made to meet or exceed NAECA requirements, this efficient heater has an automatic thermostat that makes it easy for you to control precisely the temperature of the water.  Meets or exceed NAECA and UL requirements. Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated.
A/C-HEAT ROOM 12K BTU 220 VOLT WATER HEATER ELEC MED 40GALLON WATER HEAT 30GAL POU ELEC 240V
Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off. 0.93 Energy Factor. Meets or exceeds NAECA and UL requirements. Medium profile allow this water heater to fit into spaces a taller model won't while increasing ease of installation. 0.95 Energy Factor. Point-of-Use water heater has a compact design that can provide an adequate supply of hot water for a single application. The water heater includes a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation.
WATER HEAT 30GAL POU ELEC 120V WATER HEATER ELEC MED 50 GAL  A/C ROOM 18K BTU 230V W/REMOTE
0.95 Energy Factor. Point-of-Use water heater has a compact design that can provide an adequate supply of hot water for a single application. The water heater includes a factory installed temperature and pressure relief valve. The heater can be mounted on a wall for convenient installation. 0.93 Energy Factor. Meets or exceeds NAECA and UL requirements. Medium profile allow this water heater to fit into spaces a taller model won't while increasing ease of installation. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated.
A/C-HEAT ROOM 18.5K BTU 230 V WATER HEATER ELEC SHORT 47GAL A/C WINDOW 25K BTU 230V W/RMT
Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off. Features a mechanical thermostat that automatically keeps water at your desired temperature and meets or exceeds NAECA and UL requirements. Electronic controls with full feature remote and auto restart. Four-way adjustable air direction, easy-access, slide-out, washable filter, one degree temperature adjustment. Energy saver mode, 24-hour on/off timer, dehumidification and auto modes. Energy Star Rated.
A/C-HEATER WINDOW 220 VOLTS   Richmond 8TV40-2 Double Element Table Top Electric Water Heater Richmond MR50245 Round and Tall Electric Water Heater
Electronic controls with full feature remote, 24-hour on/off timer. Energy saver mode, auto restart, four way adjustable air direction, one degree temperature adjustment. Designed for supplemental electric heat only, thermostat cycles heating element on and off. 6-year limited warranty on tank and parts. Dual 4500 watt heating elements for faster recovery, patented resistor design heating elements prolong anode rod and tank life, porcelain enamel top is durable and provides added work area in kitchen installations, compact design permits water heater to fit snugly against wall, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Dia:25",Ht:36" WtrCnHt:33" Lifetime limited tank warranty, 6-year limited parts warranty. Seamless, blow-molded, polybutene tank ? impervious to rust and corrosion, multiple layers of filament wound fiberglass give the tank unmatched strength, polyurethane insulation helps reduce energy consumption. Pipe wrap energy saving kit included to achieve maximum energy savings, recessed drain valve is out of the way of brooms and scrubbers, tough molded polyethylene outer shell resists dents and scratches, bowl shaped bottom allows complete sediment draining, high temperature polysulfone dip tubes, thermally fused upper element provides protection against "dry-firing", titanium lower element for superior resistance to lime build-up, factory installed conduit between element control boxes, all plastic tank eliminates the need for an anode rod, factory installed temperature and pressure relief valve, factory installed vacuum relief valve.
Heat Controller SMH09SC-0-25-KIT Ductless Mini-Split Air Conditioner Heat Controller PTAC EKTC09-1G-3-KIT Air Conditioner Kit Heat Controller PTAC EKTC12-1G-3-KIT Air Conditioner Kit
Comfort-Aire by Heat Controller. 9,000  or 12,000 BTU Cooling + Heat models 110V. Ready to install kits. Include 1 each outdoor condenser, Indoor air handler, 25ft insulated line set, 30ft communication wire, and surge protector. Whisper quiet, high tech fan in the indoor unit delivers balanced air flow. 24- hour timer and turbo mode. Auto Operation - Automatically adjusts to maintain a constant temperature/humidity level. Air filter helps trap dust, pollen and other particles in the air; this permanent filter is designed to be washed on a regular basis and re-installed. Auto Restart - Reverts to the last setting following a power failure. Low Ambient Operation - Crankcase heater allow operation at 5 degree F (cooling). Includes a fully featured wireless remote. Comfort-Aire by Heat Controller, for applications in hotels, motels, apartments, nursing homes, office buildings and schools. Front desk control and electronic temperature limiter prevent over-heating and over-cooling. LED display and touchpad buttons. Designed with innovative and universal components, including standard 16" x 42" chassis, for installation. 9,000  or 12,000 BTU Cooling + Heat models 220V. "Ready to Install Kits" include 1 each PTAC unit, power cord for 3kw heat, uninsulated wall sleeve, and exterior grille. Comfort-Aire by Heat Controller, for applications in hotels, motels, apartments, nursing homes, office buildings and schools. Front desk control and electronic temperature limiter prevent over-heating and over-cooling. LED display and touchpad buttons. Designed with innovative and universal components, including standard 16" x 42" chassis, for installation. 9,000  or 12,000 BTU Cooling + Heat models 220V. "Ready to Install Kits" include 1 each PTAC unit, power cord for 3kw heat, uninsulated wall sleeve, and exterior grille.
Heat Controller SMH12SC-0-25-KIT Ductless Mini-Split Air Conditioner HEAT PUMP 50GAL 10YR HYBRID   HEAT PUMP 80GAL 10YR HYBRID
Comfort-Aire by Heat Controller. 9,000  or 12,000 BTU Cooling + Heat models 110V. Ready to install kits. Include 1 each outdoor condenser, Indoor air handler, 25ft insulated line set, 30ft communication wire, and surge protector. Whisper quiet, high tech fan in the indoor unit delivers balanced air flow. 24- hour timer and turbo mode. Auto Operation - Automatically adjusts to maintain a constant temperature/humidity level. Air filter helps trap dust, pollen and other particles in the air; this permanent filter is designed to be washed on a regular basis and re-installed. Auto Restart - Reverts to the last setting following a power failure. Low Ambient Operation - Crankcase heater allow operation at 5 degree F (cooling). Includes a fully featured wireless remote. Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included. Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included.
   
 
1