Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > GAS HEATERS - LP
Sort By:
1
BrassCraft 294F Half Union Adapter Anderson Metal 750097-0604 Brass Flare  Adapter Anderson 750066-0606 3-Piece Tubing Coupling
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Anderson Tube Adapter, 1/4 x 3/8 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson 750066-0302 3-Piece Reducing Tubing Coupling BrassCraft 293M Half Union Adapter BrassCraft MAU1-10-8 Gas Adapter
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
BrassCraft MAU2-10-8 Gas Adapter BrassCraft PSSL-14 Gas Dryer Adapter BrassCraft PSSC-62 Gas Supply Adapter
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D For corrugated tube. Recommended for gas range connections.
FITTING ADAPTER GAS 3/8IN MIP BrassCraft PSSC-66 Gas Supply Adapter Mr Heater F276152 Heater Fitting
3/8" OD Flare x 3/8" MIP tapped 1/8 FIP. For use with gas appliances. For corrugated tube. Recommended for gas range connections. Male pipe thread x left hand male thread.
BrassCraft PSSL-16 Gas Supply Union Brass-Craft FU3-6 Pipe Union Brass-Craft PSSC-63 Male Half Union
For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP.
BrassCraft MAU1-10-12 Gas Adapter BrassCraft MAU2-10-12 Gas Adapter Anderson 754055-06 2-Way Tube Elbow
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. UPC individually bagged.
Brass-Craft PSSL-15 Female Pipe Union Mr Heater F276154 Hose Assembly BrassCraft 2294M Half Union Adapter
For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. Male pipe thread x left hand male thread. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
Brass-Craft PSSC-64 Male Half Union Brass-Craft PSSD-43 Male Half Union BrassCraft PSSD-42 Gas Supply Union
For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. For 3/8'' ID (1/2'' OD) corrugated tube. Recommended for fixed air heater, gas range, furnace, and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8'' FIP thread. For 3/8'' I.D. (1/2'' OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces, and water heater connections. Use with PlumbShop SD or RSD Series connectors.
B K Industries 102-003 Boiler Drains BrassCraft M40-10 Gas Tube Cap Anderson Metal 750097-0806 Brass Adapter
Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures. Up to 1/2 psi maximum. Anderson Tube Adapter, 1/2 x 3/8 in Nominal Size, Compression, Brass
Mr Heater F276153 Cylinder Adapter Anderson 750066-0406 3-Piece Tubing Coupling B K Industries 102-103 Boiler Drains
Male pipe thread x left hand male thread. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
B K Industries 102-004 Boiler Drains Mueller ProLine 2-Piece Gas Ball Valve Anderson 754050-0806 Tube Elbow
Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance. UPC individually bagged.
Kbi/King BDC-0500-S Ever Tuff KBI/King BDC-0750-S Flowguard Gold Boiler Drains Anderson 54840-06 Space Heater Tube Cap
High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
B K Industries 102-104 Boiler Drains EZ-Flo 20371 Angle Radiator Air Valve B and K Industries 102-703HN Boiler Drains
Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61. 1/8" angle MIP. Maximum operating pressure 5 PSI. Maximum pressure 10 PSI. Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18.
B K Industries 102-053HN Quarter Master B and K 102-803HC Boiler Drains VALVE 1/2IN FIP X FIP
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Yellow handle. 1/2 PSI maximum working pressure.
B and K Industries 102-704HC Boiler Drains Anderson 54806-0606 Tube To Pipe Coupling B and K Industries 102-054HN Quarter Master
Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
Brass Craft PSBV503-8 Quarter Turn Gas Ball Valve B and K 102-804HC Boiler Drains Brass Craft PSSL-12 Gas Ball Valves
Gas appliance connector with lever handle. AGA Design Certified. Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
B and K 102-033 Boiler Drains Brass Craft PSSD-41 Quarter Turn Gas Ball Valve VALVE 3/8IN FIP X FIP
For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Yellow handle. 1/2 PSI maximum working pressure.
Mueller ProLine 1-Piece Gas Ball Valve Mr Heater F276129 Cylinder Adapter Mr Heater F276139 Cylinder Adapter
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed. Soft nose P.O.L. Most commonly used to connect 9/16" female left hand thread to 7/8" female  P.O.L. Restricted Flow Soft Nose P.O.L. X 1/4" male thread. Most commonly used to connect 1/4? female pipe thread to 7/8? female P.O.L.
Mr Heater F273117 Thermocouple Lead Genova 53067 Washer Hose Valve B and K 102-013 Boiler Drains
Replacement part for most Mr. Heater tank top models. Proir to 2011. Solvent welds directly to 1/2" CPVC tubing and adapts to female hose couplings. Most often used in conjunction with No.53056/530561 wing elbow to supply water to automatic washing machines. Bulk. 3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
VALVE 1/2IN FIP X FIP 1 PIECE Mr Heater F276495 Coupling Nut VALVE 3/4IN FIP X FIP
Yellow handle. 1/2 PSI maximum working pressure. End fitting for Type 1, Qcc-1 gas grill systems. For appliances with 80,000 BTUs or less. Threaded shut-off, excess flow safety. Yellow handle. 1/2 PSI maximum working pressure.
B and K 102-014 Boiler Drains Brass Craft TBV6F-8 Quarter Turn Gas Ball Valve Mr Heater F276329 Cylinder Fill Plug
3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 7/8" female P.O.L. x male plug. For use with Mr. Heater's Gas Mate ll Quick Connect Coupling kit F276330. Use L.P. gas fill plug for filling the tank with the Gas Mate ll in place. CSA certified. UL approved.
Mr Heater F273754 Throwaway Cylinder Adapter Brass Craft TBVF8 Quarter Turn Gas Ball Valve Mueller ProLine 1-Piece Gas Ball Valve
1/4" male pipe thread x 1" -20 female throwaway cylinder thread. Forged brass body eliminates pinhole leaks commonly associated with cast products. Specially designed seat rings are made of pure PTFE to assure longer life. Quarter-turn design for easy on/off operation. 100% leak tested. Blow-out proof stem is assembled from the inside with double O-rings to ensure safe, reliable performance. Large octagonal wrench flats for easy installation. CSA design-certified. Also design-certified and manufactured in accordance with ANSI Z21.15 CSA 9.1, ANSI/ASME B16.33, ANSI/ASME B16.44, CSA-US/C 3-88, CSA-US/C CR91-002, and CSA 3.16 Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
B K Industries 117-592 Gas Ball Valves Anderson 54800-06 Space Heater Tube Nut Mueller ProLine 2-Piece Gas Ball Valve
Forged brass 1-piece body. Chrome plated forged brass ball. Coated aluminum handle. 9/16''-24 fine thread flare for 3/8'' tube. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. Threaded flare ends comply with SAE F513. UPC coded bulk. 9/16-24 thread. Bagged with flag tag. Two-piece body.Multi-directional flow, chrome-plated brass bal, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL lised. Threaded ends comply with ANSI B1.20.1. -20 to 300 DegF temperature range. quartert turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
Mr Heater F273699 Fuel Filter B & K ProLine Straight Radiator Steam Vent B & K ProLine Straight Radiator Steam Vent
For use with "Buddy" heaters. Most commonly used with bulk cylinder and hose assembly. Non-vacuum float style. Non-vacuum float style.
EZ-Flo 20378 Adjustable Angle Radiator Air Valve VALVE 3/4IN FIP X FIP 1 PIECE Mr Heater F273655 Cylinder Adapter
1/8" angle MIP. Maximum operating pressure 1-1/2 PSI. Maximum pressure 10 PSI. Yellow handle. 1/2 PSI maximum working pressure. Soft nose excess flow P.O.L. x 1/4" male pipe thread.
Mr Heater F273755 Throwaway Cylinder Adapter Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Mueller ProLine 1-Piece Gas Ball Valve
1/4" male pipe thread x 1" -20 male throwaway cylinder thread. -20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
B and K 102-034 Boiler Drains Brass Craft PSBV503-12 Quarter Turn Gas Ball Valve Anderson Metal 730081-04 Brass Compression Cap
For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Gas appliance connector with lever handle. AGA Design Certified. UPC individually bagged.
VALVE1/2IN FIP X 15/16IN FLARE Mr Heater F276130 Throwaway Cylinder Adapter Mr Heater F271163-30 Hose Assembly
Yellow handle. 1/2 PSI maximum working pressure. 9/16" left hand male thread x 1" -20 throwaway cylinder thread with shutoff. 3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance.
Anderson Metal 730081-06 Brass Compression Fitting B and K Industries 115-503 Gas Ball Valve Mueller ProLine 1-Piece Gas Ball Valve
UPC individually bagged. Forged brass 1-piece body with chrome-plated forged brass ball and coated aluminum handle. Threaded flare ends comply to SAE F513. For natural gas, also approved for use with water up to 175 PSI. Threaded ends comply with ANSI B1.20.1. CSA Certified, CSA- 3-88 (2 PSIG) Certified. UPC coded bulk. 1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA Certified. Threaded flare ends comply to SEA J513. CSA Z21 (PSIG) certified.
VALVE 3/4IN FIP X 15/16 FLARE VALVE 3/4IN FIP X 5/8IN FLARE Gas Mate F276328 Quick Connector
Yellow handle. 1/2 PSI maximum working pressure. Yellow handle. 1/2 PSI maximum working pressure. 1/4" male pipe thread x male plug quick connect fitting. For appliances 80,000 BTUs or less. CSA certified. For use with F276334. UL approved.
Brass Craft PSSC-61 Gas Ball Valves Brass Craft PSSC-60 Quarter Turn Gas Ball Valve Arrowhead Brass 221BCLD Boiler Drains
Non-replaceable rotor. 6.9"L x 4.9"W x 1.9"D Recommended for appliance connections. Corrosion resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle.
Anderson Metal 750086-0610 Brass Compression Adapter Arrowhead Brass 222BCLD Boiler Drains Arrowhead Brass 223BCLD Boiler Drains
Use with copper, aluminum, or plastic tubing for water, gas, oil, and vacuum lines in a -65 to 250-degree temperature range. Easy to disassemble, no flaring tool required. UPC individually bagged. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle.
Mr Heater F276148 Hose Assembly Mr Heater F273761 Low Pressure Regulator B and K Industries 110-225/110-125 Gas Ball Valve
9/16" left hand female threads on both ends. Used to connect one hose or for additional length connect two F276148, (Orgill Sku No. 418.3968) hoses with F276154, (Orgill Sku No. 437.0888) brass fitting. 3/8" female pipe thread x appliance end fitting. For Type 1 "QCC-1" gas grill systems. 11" W.C. regulator. 75,000 BTU maximum flow. -20 Deg. F ? 300 Deg. F temperature range, quarter-turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance, multi-directional flow, two-piece body design, chrome-plated brass ball, CSA - ANSI Z21.15, (1/2 PSIG), ANSI/ASME B16.44 (5G), UL listed, threaded ends comply with ANSI B1.20.1. Rated for 200 PSI
Mr Heater F276136 Pressure Regulator Mr Heater F273759 Low Pressure Regulator Mr Heater F271163-60 Hose Assembly
3/8" FPT x P.O.L. 11" low pressure regulator will operate barbecue grills and low pressure appliances. 3/8" female pipe thread x P.O.L. 11" W.C. low pressure regulator designed with 90 degree angle. Will operate on all standard barbecue grills and other appliances. 75,000 BTU maximum flow. 3/8" male pipe thread x 3/8" female flare. Most commonly used to hook a low pressure regulator to an appliance.
Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Gas Mate F276281 Full Flow Quick Connector Mr Heater F273707 Hose Assembly
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 1/4" male pipe thread x full flow male plug. For all appliances and all BTUs or high pressure appliances. Can be used with F276334 or can replace excess flow plug in F276181, F276186 and F276330 kits. 1/4" male pipe thread x 3/8" female flare. Replaces most hose assemblies between regulator and fish cooker/smoker, torches, or other appliances.
Mueller ProLine 1-Piece Quarter Turn Gas Ball Valve Anderson Metal 750082-0604 Brass Compression Mr Heater F276124 Hose Assembly
-20 to 300 degrees F. temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 PSIG), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1 Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. 3/8" male pipe thread x 3/8" female pipe thread. Often used to connect low pressure appliances to low pressure regulators.
Anderson 54806-0608 Tube To Pipe Coupling VALVE 1IN FIPX1IN FIP TEE HNDL Mr Heater F273717 Extension Hose Assembly
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Yellow handle. 1/2 PSI maximum working pressure. Commonly used in most weed burners, torches and fish cookers. 1/4" female pipe thread x 1/4" male pipe thread.
Anderson Metal 54808-0606 Flare Tube Fittings Mr Heater F271158-12 Flexible Pigtail Hose Assembly Mr Heater F273767 Low Pressure Regulator
9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. Acme flexible pigtail hose assembly. 1/4" inverted male flare x Acme Nut. Connects to a Stay A While Tee and Auto-Changeover Dual Stage Regulator. 1/4" female pipe inlet x 3/8" female pipe outlet. Use with low pressure appliances up to 200,000 BTUs.
Mr Heater F273758 Throwaway Cylinder Adapter B & K 109-304 Angle Steam Radiator Valve Mr Heater F276172 Tank Refill Adapter
1" -20 throwaway cylinder thread x soft nose P.O.L. - Propane bulk cylinder adapter with handwheel allows appliances designed for use on throwaway cylinders, and with a hose/regulator assembly to be attached directly to a bulk tank (i.e. "Mr. Camper", "Coleman Company Inc.", or "Century Primus" stove). Low pressure steam or circulated, hot water systems. 15 PSI, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel. Female throwaway cylinder thread x P.O.L. Refills 1 LB. bottles in 1 minute or less. (NOT AVAILABLE IN CANADA)
VALVE 1/2IN MIP X CSST DIRECT Anderson Metal 54808-0608 Flare Tube Fittings Gas Mate F276187 Quick Connector
Yellow handle. 1/2 PSI maximum working pressure. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. 3/8" male pipe thread x 3/8" female pipe thread. CSA certified. UL approved.
Anderson 750066-0806 3-Piece Reducing Tubing Coupling Anderson Metal 730081-08 Brass Compression Cap Anderson 750066-0808 3-Piece Tubing Coupling
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
BrassCraft FO-6 Tube Nut B & K 109-305 Angle Steam Radiator Valve Anderson Metal 750082-0806 Brass Compression
3/8" O.D. tube. Low pressure steam or circulated, hot water systems. 15 PSI, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged.
VALVE 3/4IN MIP X CSST DIRECT Anderson 750066-1008 3-Piece Tubing Coupling Mr Heater F271239 One Stop Gas Hookup Kit
Yellow handle. 1/2 PSI maximum working pressure. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. One stop 5 piece kit. Complete gas hook-up for most gas appliances. 18" long line. Typical Uses: Gas logs, unvented wall, mount heaters, gas stoves, and garage heaters.
Anderson 750066-0402 3-Piece Reducing Tubing Coupling Mr Heater F273701 Hose Assembly Anderson 754049-0608 Tube Elbow
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Connects appliances designed to use 1 pound disposable cylinder to a 5 to 20 pound cylinder. Hand tighten swivel on both ends. Swivel 1" -20 male throwaway cylinder thread x soft nose excess flow P.O.L. with handwheel. Commonly used with portable Buddy & Big Buddy w#017-4755 fuel filter. UPC individually bagged.
Anderson 754049-0402 Tube Elbow Anderson Metal 750062-04 Brass Compression Fittings Anderson Metal 750082-1006 Brass Compression Union
UPC individually bagged. Anderson Tube Full Union, 1/4 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750062-08 Brass Compression Fittings B & K 109-306 Angle Steam Radiator Valve Anderson 754049-0404 Tube Elbow
Anderson Tube Full Union, 1/2 in Nominal Size, Compression, Brass Low pressure steam or circulated, hot water systems. 15 PSI, WSP steam, Adjustable backing. Rising stem, heat resistant handle wheel. UPC individually bagged.
Anderson 754049-0808 Tube Elbow Anderson Metal 54844-06 Flare Tube Fitting Anderson 754049-0806 Tube Elbow
UPC individually bagged. 9/16''-24 fine thread flare end for space heaters. UPC individually bagged. UPC individually bagged.
Anderson 754055-08 2-Way Tube Elbow Mr Heater F273719 High Pressure Regulator Anderson 754050-0808 Tube Elbow
UPC individually bagged. Full flow soft nose P.O.L. x 1/4" female pipe thread. Range of 0-20 PSI. Most commonly used on torches, fish cookers, smokers or other high pressure appliances. 400,000 BTU capacity. UL Listed. UPC individually bagged.
Anderson Metal 750082-1008 Brass Compression Union Anderson Metal 750062-03 Brass Compression Fitting Anderson 750066-0404 3-Piece Tubing Coupling
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. Anderson Tube Full Union, 3/16 in Nominal Size, Compression, Brass Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750062-10 Brass Compression Fittings Anderson Metal 750062-06 Brass Compression Fittings Mr Heater F273711 Hose Assembly
Anderson Tube Full Union, 5/8 in Nominal Size, Compression, Brass Anderson Tube Full Union, 3/8 in Nominal Size, Compression, Brass Swivel 1" -20 male throwaway cylinder thread x swivel 1" -20 female throwaway cylinder thread. Used with most distribution posts or "T" and "Y" connectors as well as 1 LB. disposable cylinders. Hand tighten swivel on both ends.
Mr Heater F273702 Hose Assembly Anderson Metal 730081-10 Brass Compression Cap Anderson 754049-0604 Reducing Tube Elbow
Connects appliances designed to use 1 pound disposable cylinder to a 5 to 20 pound cylinder. Hand tighten swivel on both ends. Swivel 1" -20 male throwaway cylinder thread x soft nose excess flow P.O.L. with handwheel. Commonly used with portable Buddy & Big Buddy w#017-4755 fuel filter. UPC individually bagged. UPC individually bagged.
Gas Mate F276190 Quick Connector Anderson 750066-0604 3-Piece Reducing Tubing Coupling Anderson 754050-0812 Tube Elbow
For use with natural gas and propane. Precision milled and solid brass construction. Hex design allows solid fitment. 1/4" male pipe thread x 1/4" female pipe thread socket end. Certified 250 P.S.I. rated. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged.
Anderson Metal 757422-1204 Brass Compression Adapter Anderson 750066-0608 3-Piece Tubing Coupling Anderson Metal 750062-05 Brass Compression Fitting
UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Anderson Tube Full Union, 5/16 in Nominal Size, Compression, Brass
Anderson 754049-1008 Reducing Tube Elbow Anderson 754050-0606 Tube Elbow Anderson 750066-0504 3-Piece Reducing Tubing Coupling
UPC individually bagged. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson 750066-1012 3-Piece Tubing Coupling Mr Heater F273751 Adapter Tee REGULATOR DUALSTAGE W/POL
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Excess flow soft nose P.O.L. x 1" -20 male throwaway cylinder thread. Conveniently use camper and trailer propane supply for lanterns, tabletop barbecue, etc., at parks, campsites, and rest stops. Use with hose assembly F273711 (Orgill Sku No. 258.0256), F273701 (Orgill Sku No. 999.8113), and F273702 (Orgill Sku No. 620.3814). Also use with F273710. Excess flow soft nose P.O.L. (Inlet) x 3/8" female pipe thread (Outlet). Use with propane fueled indoor/outdoor appliances. 160,000 BTU maximum flow.
Anderson Metal 50862-04 Brass Compression Union Anderson 754055-10 2-Way Tube Elbow Anderson 754049-0606 Tube Elbow
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson 754050-1008 Reducing Tube Elbow Anderson 754050-0608 Tube Elbow Anderson 54748-1508 Tube To Pipe Connector
UPC individually bagged. UPC individually bagged. 15/16''-16 thread for brass range connectors. UPC individually bagged.
Anderson 750066-1412 3-Piece Tubing Coupling Anderson 750066-0812 3-Piece Tubing Coupling Anderson 754049-1012 Tube Elbow
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. UPC individually bagged.
Anderson 54746-1508 Tube To Pipe Coupling Anderson 754050-1012 Tube Elbow Anderson 754049-0812 Tube Elbow
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson 54748-1512 Tube To Pipe Connector Anderson 54746-1512 Tube To Pipe Coupling Anderson Metal 750062-14 Brass Compression Fittings
15/16''-16 thread for brass range connectors. UPC individually bagged. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Anderson Tube Union, 7/8 in Nominal Size, Compression, Brass
Anderson 750066-1408 3-Piece Reducing Tubing Coupling HEATER 10K BTU LP GAS 2PLAQUE HEATER 10K BTU LP BLUE FLAME
Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. Unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), Legs and wall mounting hardware included. *NOT APPROVED for CANADA* Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. It can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide years of comfortable and safe heat. *NOT APPROVED for CANADA*
HEATER 18K BTU LP GAS 3PLAQUE HEATER 20K BTU LP BLUE FLAME  HEATER 30K BTU LP GAS 5PLAQUE
Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. Unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), Legs and wall mounting hardware included. *NOT APPROVED for CANADA* Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. It can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide years of comfortable and safe heat. *NOT APPROVED for CANADA* Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. Unit can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. Multiple burner tiles utilize radiant heat warming your space with the power of the sun. With a factory standard Oxygen Depletion Sensor (ODS), Legs and wall mounting hardware included. *NOT APPROVED for CANADA*
HEATER 30K BTU LP BLUE FLAME  WATER HEATER NATGAS TALL 40GAL WATER HEATER N-GAS SHORT 40GAL
Equipped with a multi-output valve for easy temperature regulation and either a piezo or electronic spark ignition for easy operation. It can be permanently mounted to the wall or securely fastened to the floor with included mounting brackets and fasteners. With a factory standard Oxygen Depletion Sensor (ODS), rest assured this heater will provide years of comfortable and safe heat. *NOT APPROVED for CANADA* Meets or exceeds NAECA requirements. Meets or exceeds NAECA requirements.
WATER HEATER N-GAS SHORT 30GAL WATER HEATER NAT GAS 29GALLON WATER HEATER 50 GALLON TALL NG
Meets or exceeds NAECA requirements. Meets or exceeds NAECA requirements. Meets or exceeds NAECA requirements.
WATER HEATER LP TALL 40GALLON WATER HEATER TALL LP 30GALLON WATER HEATER 50 GALLON TALL LP
Meets or exceeds NAECA and ASHRAE requirements. Meets or exceeds NAECA and ASHRAE requirements. Meets or exceeds NAECA and ASHRAE requirements.
WATER HEATER LP SHORT 40GALLON WATER HEATER MHM TL NG/LP 29G WATER HEATER MHM TL NG/LP 40G
Meets or exceeds NAECA and ASHRAE requirements. Dual-Fuel mobile home water heater features a low-input pilot to help conserve energy. Suitable for use in manufactured housing with a convertible control that enables the water heater to be used with either natural or LP gas and is easy to install thanks to the side-mounted temperature and pressure-relief valve and cold-water inlet and includes a piezo ignition system for no-match lighting.  Meets or exceed NAECA and ASHRAE requirements Dual-Fuel mobile home water heater features a low-input pilot to help conserve energy. Suitable for use in manufactured housing with a convertible control that enables the water heater to be used with either natural or LP gas and is easy to install thanks to the side-mounted temperature and pressure-relief valve and cold-water inlet and includes a piezo ignition system for no-match lighting.  Meets or exceed NAECA and ASHRAE requirements
HEATER WTR MHDV TL NG/LP 30GAL Richmond 6GR50PVE2-42 Round and Tall Gas Water Heater WATER HEATER 75 GALLON TALL NG
30,000 BTU Natural Gas/Liquid Propane Water Heater has a direct vent design that offers installation versatility. UL approved for manufactured housing, the heater has a low-input pilot that conserves energy and a factory installed temperature-and-pressure relief valve. Hot/cold water connections are side mounted on the heater for fast, easy installation.  Meets or exceeds NAECA and ASHRAE requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements. Provides ample hot water for households with 5 people.  Its tall profile gives this heater a smaller footprint and allows for easy installation when tank diameter is a factor.  The water heater has a 6-Year tank warranty and meets or exceeds NAECA and ASHRAE requirements.
Richmond 6GR40PVE2-40 Round and Tall Gas Water Heater WATER HEAT MHDV TL NG/LP 40GAL Richmond 6GR40PVE2-36P Tall Gas Water Heater
Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements. 30,000 BTU Natural Gas/Liquid Propane Water Heater has a direct vent design that offers installation versatility. UL approved for manufactured housing, the heater has a low-input pilot that conserves energy and a factory installed temperature-and-pressure relief valve. Hot/cold water connections are side mounted on the heater for fast, easy installation.  Meets or exceeds NAECA and ASHRAE requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements.
Richmond 6GR50PVE2-42P Tall Gas Water Heater
Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements.
   
 
1