Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > OIL HEATER ACCESSORIES
Choose a sub category:
GAS VALVES NEEDLE VALVES HOSE BIBBS
BOILER DRAINS STOP VALVES STOP & WASTE VALVES
GLOBE VALVES WATER SUPPLY LINE VALVES BALL VALVES
GATE VALVES CHECK VALVES FOOT VALVES
SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
VALVE/SILLCOCK HANDLES VALVE BOXES & COVERS MISC VALVES & FITTINGS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps Anderson Metals 50868-0402 Tube Adapter BrassCraft 294F Half Union Adapter
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. UPC individually bagged. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
Fernco PQC-101 Qwik Caps Worldwide Sourcing TC-15 Flexible Test Caps General Filters 1A-30 Replacement Oil Filter Cartridge
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. 10-micron wool felt. Center core bonded to prevent media migration.
BrassCraft 293M Half Union Adapter Worldwide Sourcing TC-2 Flexible Test Caps Anderson Metal 750068-0602 Brass Fitting
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
BrassCraft MAU1-10-8 Gas Adapter Fernco PQC-102 Qwik Caps BrassCraft MAU2-10-8 Gas Adapter
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
BrassCraft PSSL-14 Gas Dryer Adapter Anderson Metal 750068-0406 Brass Fittings BrassCraft PSSC-62 Gas Supply Adapter
For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. For corrugated tube. Recommended for gas range connections.
FITTING ADAPTER GAS 3/8IN MIP Worldwide Sourcing TC-3 Flexible TestCaps BrassCraft PSSC-66 Gas Supply Adapter
3/8" OD Flare x 3/8" MIP tapped 1/8 FIP. For use with gas appliances. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For corrugated tube. Recommended for gas range connections.
Oatey 33400 Mechanical Test Plug BrassCraft PSSL-16 Gas Supply Union Brass-Craft FU3-6 Pipe Union
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
Fernco PQC-103 Qwik Caps Brass-Craft PSSC-63 Male Half Union BrassCraft MAU1-10-12 Gas Adapter
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
BrassCraft MAU2-10-12 Gas Adapter Worldwide Sourcing TC-4 Flexible Test Caps Fernco PQC-104 Qwik Caps
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Brass-Craft PSSL-15 Female Pipe Union Flair-It 16050 Flexpex Pex Tubing General Filters 2A-710u Replacement Oil Filter Cartridge
For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. 10-micron wool felt. Center core bonded to prevent media migration.
BrassCraft 2294M Half Union Adapter Flair-It 16051 Flexpex Brass-Craft PSSC-64 Male Half Union
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP.
Brass-Craft PSSD-43 Male Half Union Anderson Metal 750068-0408 Brass Fittings Oatey 33401 Mechanical Test Plug
For 3/8'' ID (1/2'' OD) corrugated tube. Recommended for fixed air heater, gas range, furnace, and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8'' FIP thread. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
BrassCraft PSSD-42 Gas Supply Union B K Industries 102-003 Boiler Drains BrassCraft M40-10 Gas Tube Cap
For 3/8'' I.D. (1/2'' OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces, and water heater connections. Use with PlumbShop SD or RSD Series connectors. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61. For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures. Up to 1/2 psi maximum.
Oatey 33402 Mechanical Test Plug B K Industries 102-103 Boiler Drains B K Industries 102-004 Boiler Drains
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61. Rising stem, six-point cast-iron handle, 3/4" hose thread outlet, complies with ASME A112.18.1, threaded ends comply with ANSI B1.20.1. hose threads comply with ANSI B1.20.7, certified to NSF 61.
B & K 102-303 No-Kink Hose Bibb Brass Craft CSSTNN-16N Gas Appliance Connectors Kbi/King BDC-0500-S Ever Tuff
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
B & K 102-403 No-Kink Hose Bibb B & K 102-304 No-Kink Hose Bibb KBI/King BDC-0750-S Flowguard Gold Boiler Drains
For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. High-impact CPVC construction for use in hot or cold fluid systems up to 180 degrees F. Use with water and approved chemicals. 1/2" MHT outlet. Beige color body with red wheel handle. tpe seal for chemical resistance and long life. Polypropylene handle and stem. Tapered valve seat allows precise flow adjustment. Complies with all applicable ASTM and ANSI standards.
B & K QuarterMaster No-Kink Hose Bibb Anderson 54840-06 Space Heater Tube Cap B K Industries 102-104 Boiler Drains
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. Neoprene seal disc. 3/4" male hose thread. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Rising stem certified to NSF 61.
Delavan .65GPH-80 Solid Cone Type B Spray Nozzle Delavan 1.00GPH-80 Solid Cone Type B Spray Nozzle Delavan .75GPH-80 Hollow Cone Type A Spray Nozzle
Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
Delavan 1.25GPH-80 Hollow Cone Type A Spray Nozzle Delavan .75GPH-80 Solid Cone Type B Spray Nozzle Delavan .65GPH-80 Hollow Cone Type A Spray Nozzle
Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
Delavan 1.00GPH-80 Hollow Cone Type A Spray Nozzle Delavan .60GPH-80 Hollow Cone Type A Spray Nozzle Delavan .85GPH-80 Hollow Cone Type A Spray Nozzle
Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
B & K 103-003 Hose Bibb B & K 103-003 Hose Bibb B & K 102-404 No-Kink Hose Bibb
3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Brass Craft CSSTNN-22N Gas Appliance Connectors B & K QuarterMaster No-Kink Hose Bibb B and K Industries 102-703HN Boiler Drains
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18.
Oatey 33403 Mechanical Test Plug B K Industries 102-053HN Quarter Master Flair-It 16052 Flexpex Pex Tubing
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
B and K 102-803HC Boiler Drains Brass Craft CSSTNN-28N Gas Appliance Connectors B & K QuarterMaster No-Kink Hose Bibb
Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton
Delavan .50GPH-90 Hollow Cone Type A Spray Nozzle Delavan .75GPH-60 Hollow Cone Type A Spray Nozzle Delavan 1.10GPH-80 Hollow Cone Type A Spray Nozzle
Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
Anderson Metal 750068-0812 Brass Fittings Delavan .65GPH-60 Hollow Cone Type A Spray Nozzle Delavan .85GPH-80 Solid Cone Type B Spray Nozzle
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners.
Delavan 1.35GPH-60 Solid Cone Type B Spray Nozzle Delavan 1.00GPH-60 Hollow Cone Type A Spray Nozzle Delavan .65GPH-90 Hollow Cone Type A Spray Nozzle
Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
Delavan 1.25GPH-90 Hollow Cone Type A Spray Nozzle Delavan 1.35GPH-80 Hollow Cone Type A Spray Nozzle Delavan 1.50GPH-60 Hollow Cone Type A Spray Nozzle
Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
Delavan 1.50GPH-80 Hollow Cone Type A Spray Nozzle Delavan 1.20GPH-60 Solid Cone Type B Spray Nozzle Delavan 1.65GPH-60 Hollow Cone Type A Spray Nozzle
Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
Delavan 1.20GPH-80 Solid Cone Type B Spray Nozzle Delavan 1.65GPH-80 Solid Cone Type B Spray Nozzle Delavan 1.75GPH-80 Solid Cone Type B Spray Nozzle
Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners. Produce a spray that distributes droplets fairly uniformly throughout the complete pattern. The spray pattern becomes progressively more hollow at higher flow rates. Provides smooth ignition and efficient combustion, particularly in larger burners.
Delavan .85GPH-60 Hollow Cone Type A Spray Nozzle Delavan 1.25GPH-60 Hollow Cone Type A Spray Nozzle Delavan .60GPH-90 Hollow Cone Type A Spray Nozzle
Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion. Mainly used on burners with a hollow cone air pattern and for throughputs up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low-noise combustion.
B & K QuarterMaster No-Kink Hose Bibb B & K QuarterMaster Hose Bibb B and K Industries 102-704HC Boiler Drains
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. Rising stem, neoprene seal washer, 3/4" hose thread outlet, cast iron handle. Theaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7, colde ends comply with ANSI B16.18.
Anderson 54806-0606 Tube To Pipe Coupling B and K Industries 102-054HN Quarter Master B & K 103-013 Hose Bibb
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7; solder (sweat) ends comply with ANSI-B16.18. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
B and K 102-804HC Boiler Drains B & K 103-014 Hose Bibb Mueller ProLine Compact Pattern Standard Port Gate Valve
Rising stem, six-point cast iron lhandle, 3/4" hose thread ourlet. Threaded ends comply with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.
B & K QuarterMaster Hose Bibb B and K 102-033 Boiler Drains BIBB HOSE MULTI-TURN 1/2IN
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton. For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet.
Mueller ProLine Compact Pattern Standard Port Gate Valve Genova 53067 Washer Hose Valve B and K 102-013 Boiler Drains
Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Solvent welds directly to 1/2" CPVC tubing and adapts to female hose couplings. Most often used in conjunction with No.53056/530561 wing elbow to supply water to automatic washing machines. Bulk. 3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7.
B and K 102-014 Boiler Drains BIBB HOSE MULTI-TURN 3/4IN    Mueller ProLine Full Port Gate Valve
3/4" hose threaded outlet, cast iron handle. Meets NSF/ANSI 61-9. Nose threads comply to ANSI B1.20.7. Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet. Full port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Brass Craft CSSTNN-34N Gas Appliance Connectors BrassCraftCSSLNN-10NGasApplianceConnectors NDS ProGuard Gate Valve
Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
NDS ProGuard Gate Valve Anderson 54800-06 Space Heater Tube Nut Brass Craft CSSL54-12 Gas Appliance Connectors
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. 9/16-24 thread. Bagged with flag tag. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSD54-12 Gas Appliance Connectors Mueller ProLine Compact Pattern Standard Port Gate Valve Mueller ProLine Compact Pattern Standard Port Gate Valve
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, solder ends comply with ANSI B16.18, certified to NSF 61.
Brass Craft CSSLNN-16N Gas Appliance Connector BrassCraftCSSCNN-22NGasApplianceConnectors BrassCraftCSSLNN-22NGasApplianceConnectors
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Mueller ProLine Full Port Gate Valve B & K 103-023 Hose Bibb BrassCraftCSSLNN-28NGasApplianceConnectors
Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
B and K 102-034 Boiler Drains Brass Craft CSSLNN-34N Gas Appliance Connector VALVE GARDEN 1/2IN
VALVE GARDEN 1/2IN
Our Price: $12.11
For 5/8" OD Tubing with stuffing box. Neoprene seal disc, 3/4" hose thread outlet, cast iron handle. Hose threads comply with ANSI B1.20.1, rising stem certified to NSF 61. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Multi-turn shutoff valves that allow for the regulation of water flow. Designed with an integrated drain vent, allowing for easy cold weather maintenance. Push-to-connect ends that enable quick installation and are compatible with Copper, CPVC and PEX pipe. Combines either a 1/2 or 3/4 Push-To-Connect inlet with a 3/4 MHT outlet connection.
BIBB HOSE QTR TURN 90DEG 1/2IN NDS ProGuard Gate Valve NDS ProGuard Gate Valve
Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards.
Anderson Metal 730081-04 Brass Compression Cap Brass Craft CSSTNN-46N Gas Appliance Connectors Del-O-Flo .55GPH-90A Plug Resistant Type A/B Spray Nozzle
UPC individually bagged. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Low-capacity nozzles designed to minimize the plugging problems associated with very low flow rates. The special interior design of the Del-O-Flo flushes contaminants through, limiting build-up. These nozzles will interchange whenever standard A or B nozzles are called for.
Anderson Metal 730081-06 Brass Compression Fitting B and K Industries G014SS101118RP Gas Connectors Brass Craft CSSL54-18 Gas Appliance Connectors
UPC individually bagged. CSA certified up to .05 PSIG, -40 to 150 degrees operating temperature. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSNN-28N Gas Appliance Connector VALVE GARDEN 3/4IN            Brass Craft CSSC21-24 Gas Appliance Connectors
VALVE GARDEN 3/4IN
Our Price: $13.20
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Multi-turn shutoff valves that allow for the regulation of water flow. Designed with an integrated drain vent, allowing for easy cold weather maintenance. Push-to-connect ends that enable quick installation and are compatible with Copper, CPVC and PEX pipe. Combines either a 1/2 or 3/4 Push-To-Connect inlet with a 3/4 MHT outlet connection. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Arrowhead 253 No-Kink Hose Bibb World Marketing FA1005 Forced Air Air Filter Kit Brass Craft CSSL54-36 Gas Appliance Connectors
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Fits all Dura Heat kerosene forced air heaters except DFA400/650 series. Also fits most DynaGlo and DynaPro models. Kit includes 1 Intake Filter #287-4100-10, 1 Lint Filter #287-4100-00, and 1 Output Filter #287-4000-10. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
HOSE BIBB QTR TURN 1/2IN      Brass Craft CSSL54-24 Gas Appliance Connectors Mueller ProLine Full Port Gate Valve
HOSE BIBB QTR TURN 1/2IN
Our Price: $13.65
Quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet at a 45 degree angle to prevent hose kinks. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61.
Brass Craft CSSCNN-16N Gas Appliance Connector Mueller ProLine Compact Pattern Standard Port Gate Valve HOSE BIBB QTR TURN 3/4IN
HOSE BIBB QTR TURN 3/4IN
Our Price: $13.92
Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested. Standard port, non-rising stem, six-point cast-iron handle, brass wedge disk, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet at a 45 degree angle to prevent hose kinks.
BIBB HOSE QTR TURN 90DEG 3/4IN Arrowhead 353 No-Kink Hose Bibb Arrowhead 351 No-Kink Hose Bibb
Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Arrowhead 301 Standard Hose Bibb Brass Craft CSSD54-18 Gas Appliance Connectors Arrowhead Brass 221BCLD Boiler Drains
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle.
Brass Craft CSSD54-24 Gas Appliance Connectors Arrowhead 302 Standard Hose Bibb Brass Craft CSSC21-18 Gas Appliance Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Arrowhead Brass 222BCLD Boiler Drains Arrowhead Brass 223BCLD Boiler Drains B & K 103-024 Hose Bibb
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated wheel handle. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
Brass Craft CSSD54-24P Procoat Brass Craft CSSD54-30 Gas Appliance Connectors Brass Craft CSSL54-30 Gas Appliance Connectors
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
World Marketing FA1007 Forced Air Kerosene Photocell Anderson Metal 754048-0608 Brass Flare Fittings Brass Craft CSSTNN-58N Gas Appliance Connectors
Fits all DuraHeat kerosene forced air heaters except DFA400/650 series. UPC individually bagged. Coated stainless steel gas appliance connector without fittings. Use with adaptors and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-36P Procoat Gas Dryer Connectors Brass Craft CSSC21-30 Gas Appliance Connector Anderson Metal 750082-0604 Brass Compression
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged.
NDS ProGuard Gate Valve NDS ProGuard Gate Valve Brass Craft CSSC21-36 Gas Appliance Connectors
PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. PVC construction. Gray color body with red handle. EPDM O-rings. Complies with all applicable ASTM and ANSI standards. ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration.
Brass Craft CSSD54-36 Gas Appliance Connectors Anderson 54806-0608 Tube To Pipe Coupling Brass Craft CSSLNN-46N Gas Appliance Connector
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-24P Procoat Gas Dryer Connectors Anderson Metal 54808-0606 Flare Tube Fittings Brass Craft CSSCNN-46N Gas Appliance Connectors
Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. Coated stainless steel gas appliance connector without fittings. Use with adapters and valves only. Connectors without fittings are not CSA designed-certified. Leak tested.
Brass Craft CSSL54-48 Gas Appliance Connector Anderson Metal 754048-0806 Brass Flare Connector Mueller ProLine Standard Port Gate Valve
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. UPC individually bagged. Non-rising stem, six-point cast-iron handle, compression ends for solderless connection to copper tubing, certified to NSF 61.
World Marketing FA1008 Spark Plug World Marketing FA1009 Spark Plug Mueller ProLine Full Port Gate Valve
For use with DuraHeat kerosene portable forced air heaters and also fits similar DynaGlo and DynaPro models. For use with DuraHeat kerosene portable forced air heaters and also fits similar DynaGlo and DynaPro models. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type1, class 150 lb. specification, solder ends comply with ANSI B16.18, certified to NSF 61-G.
Brass Craft CSSD54-48 Gas Appliance Connectors Arrowhead 201 Shank-On Thread Hose Bibb Anderson Metal 754048-0402 Brass Flare Connectors
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. UPC individually bagged.
Brass Craft CSSC21-48 Gas Appliance Connectors Anderson Metal 750068-0806 Brass Fittings Anderson Metal 54808-0608 Flare Tube Fittings
ProCoat coated stainless steel gas connector with fittings. For use with residential and commercial gas appliances not subject to frequent movement that utilize natural, manufactured, mixed, liquefied-petroleum gases and LP gas-air mixtures: residential kitchen appliances, infrared or blue-flame "hearth-style" heating units, decorative gas log appliances, pulse combustion furnaces, manufactured housing (permanent residence mobile homes), laundry/utility appliances, forced air heating units, and rooftop HVAC units. Superior corrosion resistance. Greater strength and flexibility. Easy to install. CSA certified for indoor and outdoor use. 100% leak tested. Design-certified (assembled connector) and manufactured in accordance with ANSI Z21.24, ANSI Z21.75, AGAL Contract No. 8204, listed by the New York City Board of Standards and Appeals and by the Commonwealth of Massachusetts Division of Registration. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
Arrowhead 202 Shank-On Thread Standard Hose Bibb B & K 106-003NL Globe Valve Anderson Metal 754048-0808 Brass Flare Fittings
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. 125 PSI steam WSP. 200 PSI water, oil or air WOG. Bronze to bronze seal. Heavy cast iron handle. Threaded ends comply with ANSI B1.20.1. UPC individually bagged.
Brass Craft CSSD54-48P Procoat Mueller ProLine Full Port Gate Valve Brass Craft CSSL54-48P Procoat
Uniform baked-on polymer coating leaves no gaps to resist corrosion and chemicals and protect against leaks. Manufactured without soldered or brazed joints form type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. 3/8'' ID (1/2'' OD) with fittings. CSA IAS design certified for gas appliances indoor and outdoor. Full port, non-rising stem, screw over bonnet, five-point cast-iron handle, solid wedge disk, meets MSS SP-80, type 1, class 150 lb. specifications, threaded ends comply with ANSI B1.20.1, certified to NSF 61. Manufactured without soldered or brazed joints from type 304 stainless steel. Broader face nuts and fittings with smoother connector ends seal with less torque for easy installation. Uniform coating leaves no gaps and protects against corrosion and leaks.  1/4" ID 3/8" OD tube with fittings.
Brass Craft CSSD54-36P Procoat Brass Craft CSSLNN-58N Gas Appliance Connectors NDS ProGuard Gate Valve