Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > KEROSENE FUEL
Sort By:
1
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metal 730561-05 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metals P60P Tube Sleeve Anderson Metal 730561-08 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metals PLL 760 Compression Sleeve Anderson Metals PLL 760 Compression Sleeve Anderson Metal 730561-10 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 754014-06 Brass Flare Fittings Legend 313-404 Water Service Fitting Conbraco APPW512 Apollo
UPC individually bagged. Recommended on all flexible plastic connections Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Legend 313-405 Water Service Fitting
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Recommended on all flexible plastic connections
Anderson Metal 730561-06 Brass Compression Adapter Insert B and K Industries 888-221RP Bleeder Caps Legend 313-414 Water Service Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Fits most drainable valves. 3 styles of caps with washers included. Recommended on all flexible plastic connections.
Legend 313-406 Water Service Fitting PIPE PEXA 1/2IN X 5FT WHITE   Anderson Metal 754822-0606 Brass Flare Fitting
Recommended on all flexible plastic connections. Colored print line denotes color of pipe (black print for white pipe). Anderson Tube Adapter, 3/8 in Nominal Size, Flared x Compression, Brass
Mueller 107-634 Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Quarter Turn Ball Valve
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Conbraco APPW534 Apollo Conbraco APPW1012 Apollo Mueller ProLine Quarter Turn Ball Valve
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
KBI SWL-0500-T Stop and Waste Valve KBI SWL-0750-T Stop and Waste Valve Mueller ProLine Quarter Turn Ball Valve
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Allows draining of the non-pressure side of valve via 1/8" port. (polypropylene plug included). Complies with all applicable ASTM and ANSI standards. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
Mueller 107-342NL Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
PIPE PEXA 3/4IN X 5FT WHITE   Conbraco APPW51 Apollo Anderson Metals P60P Tube Sleeve
Colored print line denotes color of pipe (black print for white pipe). Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
B & K 102-303 No-Kink Hose Bibb Mueller ProLine Quarter Turn Ball Valve B & K 102-403 No-Kink Hose Bibb
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
B & K 102-304 No-Kink Hose Bibb B & K QuarterMaster No-Kink Hose Bibb Conbraco APPW1034 Apollo
For use with water or oil. multi-turn operation, 3/4" hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Mueller ProLine Full Port Ball Valve Genova 500 Line Valve B & K 103-003 Hose Bibb
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. High-temperature thermoplastics designed to be solvent welded to tubing size CPVC piping for hot and cold water. Employs the globe valve principle and the Street/Socket feature which allows use with 1/2" and 3/4" CPVC tubing (Requires couplings for attaching to 3/4" tubing). Bulk. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
Mueller ProLine Quarter Turn Solvent Ball Valve Mueller ProLine Quarter Turn Ball Valve B & K 103-003 Hose Bibb
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 3/4" hose thread outlet, threaded  ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7
B & K 102-404 No-Kink Hose Bibb B & K QuarterMaster No-Kink Hose Bibb Plumb Pak PP25502LF Saddle Valve
For use with water or oil, multi-turn operation, 3/4" hose thread outlet, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7 Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe.
B & K QuarterMaster No-Kink Hose Bibb Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Full Port Ball Valve
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO ANSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G.
B & K QuarterMaster No-Kink Hose Bibb Mueller ProLine Quarter Turn Solvent Ball Valve B & K QuarterMaster Hose Bibb
Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO-ansi/ nsf 61-9 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
Anderson Metals 60P Tube Sleeve Anderson Metals 60P Tube Sleeve B & K 103-013 Hose Bibb
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
B&K Proline Stop and Waste Valve Mueller ProLine Quarter Turn Ball Valve B & K 103-014 Hose Bibb
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G. Neoprene seal washer, 3/4" hose thread outlet, high flow rate capability, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7, certified to NSF 61.
Mueller ProLine Full Port Ball Valve Plumb Pak PP855-2LF Saddle Valve B & K QuarterMaster Hose Bibb
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. 1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe. Easy quarter turn on/off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60 percent copper alloy brass construction with chrome-plated brass ball, Teflon seats, and rust-resistant handle. 125 PSI max working pressure. 3/4" hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1; hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.
Mueller ProLine Quarter Turn Ball Valve Mueller ProLine Full Port Ball Valve Anderson 7104SCSD Self-Tapping Saddle Valve
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. For use with copper tubing. Can be installed while line is under pressure. Valve has 1/4" compression connection and clamp will fit 3/8" thru 1-3/8" O.D. copper tubing. Includes valve, saddle, nuts, screws and washer. PIERCE PIN SHOWN IN CLOSED POSITION. Bagged.
Anderson 759103-0402 Angle Needle Shut-Off Valve Anderson 759106-04 Straight Needle Shut-Off Valve Conbraco APPB2012 Apollo
Anderson Needle Shut-Off Valve, Angle, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body, Chrome Plated Finish Anderson Needle Shut-Off Valve, Straight, 1/4 in Nominal, Compression X Compression End, Brass Body Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Conbraco APPR2012 Apollo BIBB HOSE MULTI-TURN 1/2IN    Mueller ProLine Full Port Ball Valve
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet. Nickel finish, full port, PTFE disc and seat, frost-proof stainless steel ball design, CSA ANSI Z 21.15 (1/2 PSIG), CSA certified to ASME B 16.33 (5G), CSA certified to ASME B16.44 (125G), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-Gas shutoff valve (YSDT), FM approved, comforms to MSS-SP-110, meets fed spec WW-V-35, Type II, Class A Style 3, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Apollo APXV1212 Quarter Turn Ball Valve Mueller ProLine Full Port Ball Valve Anderson Metals PLF 760 Compression Sleeve
Apollo Ball Valve, Quarter Turn, Series: APXV1212, 1/2 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807 -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Oatey 43789 Dwv Saddle Tee Kit Genova 61231 Dwv Saddle Tee BIBB HOSE MULTI-TURN 3/4IN
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1-1/2" pipe into its inside diameter. CAN BE GLUED WITH PVC CEMENT. Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet.
PIPE PEXA 1IN X 5FT WHITE     B&K Proline Stop and Waste Valve B&K Proline Stop and Waste Valve
Colored print line denotes color of pipe (black print for white pipe). Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, solder end comply with ANSI B16.18, certified to NSF 61-G. Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve  PIPE PEX WHITE 1INX10FT
PIPE PEX WHITE 1INX10FT
Our Price: $10.39
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Solvent Ball Valve Oatey 43791 Dwv Saddle Tee Kit
Full port, PTFE seat and packing, padking gland, chrome-plated brass ball and stem, PEX to copper threaded connection, pipe threads comply with ANSI B1.20.1, PEX connections comply with ASTM F-1807, IAPMO listed to cUPC, certified to NSF 61-G. For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings.
Anderson 50873-0402 Needle Valve Plumb Pak PP855-30LF Saddle Tee B&K Proline Stop and Waste Valve
Anderson Needle Valve, 1/4 X 1/8 in Nominal, Plastic X Male Pipe End, -65 TO 250 deg F, Brass Body 1/2" F.I.P. outlet for 1/2" I.P.  or 3/4" O.D. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61.
Mueller ProLine Full Port Ball Valve Mueller ProLine Quarter Turn Ball Valve B & K 103-023 Hose Bibb
400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
VALVE BALL 1-1/2IN S80 SOLVENT Anderson Metals PLF 760 Compression Sleeve B&K Proline Stop and Waste Valve
Rated for 150 PSI at 73 Deg. F. For use with cold water applications, certified to NSF61-G, PTFE seats, EPDM O-rings. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Rising stem, for use with hot or cold water, plug allows draining of non-pressure side of valve when closed, Solvent ends comply with ASTM 2846, certified to NSF 61.
Mueller ProLine Full Port Ball Valve B&K Proline 7700 Full Port Solder Ball Valve VALVE GARDEN 1/2IN
VALVE GARDEN 1/2IN
Our Price: $12.11
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, CSA certified to 1/2 psig, CSA certified to ASME B16.33(5G), B16.44 (125G), threaded ends comply with ANSI B1.20.1, IAMPO IGC 157 certified, IAPMO listed cUPC, certified to NSF 61. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Multi-turn shutoff valves that allow for the regulation of water flow. Designed with an integrated drain vent, allowing for easy cold weather maintenance. Push-to-connect ends that enable quick installation and are compatible with Copper, CPVC and PEX pipe. Combines either a 1/2 or 3/4 Push-To-Connect inlet with a 3/4 MHT outlet connection.
BIBB HOSE QTR TURN 90DEG 1/2IN Oatey 43795 Dwv Saddle Tee Kit Anderson Metals 60P Tube Sleeve
Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
Oatey 43793 Dwv Saddle Tee Kit Anderson 759101-0402 Straight Needle Shut-Off Valve Apollo APXV3434 Quarter Turn Ball Valve
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Anderson Needle Shut-Off Valve, Straight, 1/4 X 1/8 in Nominal, Compression X Male Pipe End, Brass Body Apollo Ball Valve, Quarter Turn, Series: APXV3434, 3/4 in, 32 - 180 deg F, Crimpex End Connection, Brass Body, NSF Approved, ASTM F1807
B&K Proline Stop and Waste Valve Anderson 759106-06 Straight Needle Shut-Off Valve Mueller ProLine Full Port Ball Valve
Rising stem, six-point cast-iron handle, plug allows draining of non-pressure side of valve when closed, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G. Anderson Needle Shut-Off Valve, Straight, 3/8 in Nominal, Compression X Compression End, Brass Body Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included.
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve VALVE BALL 1/2IN F1960
-40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G. 200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G.
VALVE GARDEN 3/4IN            STOP VALVE W/DRAIN 1/2IN      Arrowhead 253 No-Kink Hose Bibb
VALVE GARDEN 3/4IN
Our Price: $13.20
STOP VALVE W/DRAIN 1/2IN
Our Price: $13.20
Multi-turn shutoff valves that allow for the regulation of water flow. Designed with an integrated drain vent, allowing for easy cold weather maintenance. Push-to-connect ends that enable quick installation and are compatible with Copper, CPVC and PEX pipe. Combines either a 1/2 or 3/4 Push-To-Connect inlet with a 3/4 MHT outlet connection. Push-to-connect stop valve with drain. Brass. Connects to copper, PEX, CPVC or PE-RT pipe. Lead free DZR brass construction. Designed for potable water distribution. Meets all UPC, IPC, and cUPC requirements. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Anderson Metals 750060-14 Compression Sleeve B&K Proline 7700 Full Port Ball Valve HOSE BIBB QTR TURN 1/2IN
HOSE BIBB QTR TURN 1/2IN
Our Price: $13.65
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. Quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet at a 45 degree angle to prevent hose kinks.
Anderson 7104SC Saddle Valve Kit Mueller ProLine Full Port Ball Valve HOSE BIBB QTR TURN 3/4IN
HOSE BIBB QTR TURN 3/4IN
Our Price: $13.92
For installing automatic ice maker kits on refrigerators. Kit includes angle needle valve designed to control accurate water flow into evaporative cooler units, plus a saddle clamp that permits installation in water pipe nearest humidifier unit. Furnished complete with copper tube insert and gasket. Cadmium plated clamps and bolts. Saddle clamp made to fit 3/8", 1/2" and 3/4". -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet at a 45 degree angle to prevent hose kinks.
BIBB HOSE QTR TURN 90DEG 3/4IN Arrowhead 353 No-Kink Hose Bibb Arrowhead 351 No-Kink Hose Bibb
Multi-turn or quarter-turn shutoff that allows for the regulation of water flow. Ideal for replacement and new construction installations. Ideal for replacement and new construction installations. Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe. No special tools, crimping, glue or soldering is needed. Approved for behind-the-wall applications with no access panels. Combines a 3/4 in. garden hose outlet with a 1/2 in. or 3/4 in. MHT push-to-connect inlet. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle.
Arrowhead 301 Standard Hose Bibb Anderson Metals BG3 Compression Sleeve Anderson Metal 754014-04 Brass Flare Nut
Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. UPC individually bagged.
Anderson Metal 750086-0610 Brass Compression Adapter Arrowhead 302 Standard Hose Bibb STOP VALVE W/DRAIN 3/4IN
STOP VALVE W/DRAIN 3/4IN
Our Price: $14.45
Use with copper, aluminum, or plastic tubing for water, gas, oil, and vacuum lines in a -65 to 250-degree temperature range. Easy to disassemble, no flaring tool required. UPC individually bagged. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight short shank. Push-to-connect stop valve with drain. Brass. Connects to copper, PEX, CPVC or PE-RT pipe. Lead free DZR brass construction. Designed for potable water distribution. Meets all UPC, IPC, and cUPC requirements.
Anderson Metal 754014-08 Brass Flare Fittings Mueller ProLine Full Port Ball Valve B & K 103-024 Hose Bibb
UPC individually bagged. 400 PSI WOG, 160 PSI at 73DegF, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, ideal for use in potable water and radiant heating applications, PEX connections comply with ASTM F-1807, IAPMO listd to cUPC, certified to NSF 61-G. 200 PSI water, oil or gas. 1/4-turn operation. Large flow rate. Chrome plated brass ball. 3/4" hose outlet. Pipe thread complies with ANSI B1.20.1. Hose threads comply with ANSI B1.20.7. UPC coded bulk.
VALVE BALL 3/4IN F1960        Conbraco APPB2034 Apollo Conbraco APPR2034 Apollo
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Mueller ProLine Full Port Ball Valve Anderson Metal 754014-10 Brass Flare Fittings Anderson Metals BG3 Compression Sleeve
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. UPC individually bagged. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Legend Valve T-4350 Tube to Pipe Coupling Anderson Metal 754018-04 Brass Flare Fitting B&K Proline 7700 Full Port Solder Ball Valve
Bronze body and compression nut, stainless steel gripper ring. UPC individually bagged. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson Metals 60P Tube Sleeve Arrowhead 201 Shank-On Thread Hose Bibb Anderson Metal 754014-05 Brass Flare Nut
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. UPC individually bagged.
NDS WSU-1520-S Full Port Pool Diverter Single Union Ball Valve Arrowhead 202 Shank-On Thread Standard Hose Bibb Mueller ProLine Full Port Ball Valve
Full port design, preset at 5 psi or 12 feet of head and can be adjusted to 14 psi or 32 feet of head, combination of 1-1/2" socket and 2" spigot on each end can be used on both sizes of pipe, single union design for easy serviceability, EPDM o-ring, meets/exceeds ASTM & Ansi STANDARDS. Bulk. Features heavy pattern rough brass, 1-piece O-ring bonnet, and coated tee handle. Straight on taper. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Anderson Metal 754044-04 Brass Flare Tee Mueller ProLine Full Port Ball Valve SharkBite 22222-0000LF 1-Piece Full Port In-Line Ball Valve
UPC individually bagged. Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
VALVE BALL SHARKBITE BRS 1/2IN Legend Valve T-4300 Tube to Pipe Coupling Mueller ProLine Full Port Ball Valve
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G.
B&K Proline 7700 Full Port Ball Valve Anderson Metal 754020-0806 Brass Flare Nut BASE M SERIES HEATER 20K - 30K
Procom PF09B Heater Bases
Our Price: $20.60
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. UPC individually bagged. Used for floor mounting all Procom heaters that produce more than 10,000 BTU?s of heat.
Mueller ProLine Full Port Ball Valve Legend Valve T-4305 Tube to Pipe Coupling SharkBite 22185-0000LF 1-Piece Full Port In-Line Ball Valve
200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. Legend Valve Tube to Pipe Coupling, Series: T-4305, 3/4 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water).
VALVE BALL SHARKBITE BRS 3/4IN Mueller ProLine Full Port Ball Valve Legend Valve T-4320 Pipe Coupling
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Legend Valve Pipe Coupling, Series: T-4320, 3/4 in Nominal, IPS X MIP End, Copper, For All Potable Water Systems
Conbraco APPW538 Apollo B&K Proline 7700 Full Port Ball Valve Legend Valve 313-209NL Tube to Pipe Adapter
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, threaded ends comply with ANSI B1.20.1, IAPMO listed to cUPC, certified to NSF 61-G. Legend Valve Tube to Pipe Adapter, 3/4 X 1 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass
B&K Proline 7700 Full Port Solder Ball Valve Anderson Metal 754018-10 Brass Flare Nut BALL VALVE SLIP 1/2IN
BALL VALVE SLIP 1/2IN
Our Price: $23.81
-20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome-plated brass ball and stem, suitable for vacuum use up to 7 PSIA, port allows non-pressure side to drain when closed, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. UPC individually bagged.
World Marketing 24-3508 Thermocouple Anderson Metal 754020-0604 Brass Flare Reducing Nut VALVE BALL 1IN F1960
800mm. Fits all Kozy-World pre 2015 vent-free wall heaters. UPC individually bagged.
Mueller ProLine Full Port Ball Valve Legend Valve T-4300 Tube to Pipe Coupling Legend Valve T-4350 Tube to Pipe Coupling
200 PSI WOG, -20 to 300 degrees F temperature range, full port, PTFE seat and packing, chrome plated brass ball and stem, suitable for vacuum use up to 7 PSIA, IAPMO listed to CUPC,  certified to NSF 61-G. Legend Valve Tube to Pipe Coupling, Series: T-4300, 1 X 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems Bronze body and compression nut, stainless steel gripper ring.
Mueller ProLine Full Port Ball Valve B&K Proline Ground Key Stop and Drain Valve Legend 313-154NL Water Service Fitting
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2. Bronze body and compression nut, stainless steel pipe gripper.
Legend Valve 313-280NL Tube to Pipe Adapter Anderson Metal 754018-06 Brass Flare Fitting Anderson Metal 754044-06 Brass Flare Tee
Legend Valve Tube to Pipe Adapter, 1 X 3/4 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass UPC individually bagged. UPC individually bagged.
Anderson Metal 754044-05 Brass Flare Fitting Legend Valve 313-214NL Pack Joint Union B&K Proline Ground Key Stop and Drain Valve
UPC individually bagged. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. Bronze construction, cap pattern, plated tee handle. Drains non-pressure side of line automatically when turned off. Tee handle can be removed to use the valve with a 3/8" square key. Threaded ends comply with ANSI B1.20.2.
Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve Mueller ProLine Full Port Ball Valve
Full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, 316 stainless steel grip ring, complies with ASSE 1061, certified to NSF 61-G, IAMPO listed to cUPC, PEX stiffeners included. -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Legend Valve T-4305 Tube to Pipe Coupling Legend Valve T-4410 Tube Bend BALL VALVE SLIP 3/4IN
BALL VALVE SLIP 3/4IN
Our Price: $29.68
Legend Valve Tube to Pipe Coupling, Series: T-4305, 1 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems Legend Valve Tube Bend, Series: T-4410, 90 deg, 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems
BLOWER VENT FREE  FITS ALL2016 Legend Valve T-4300 Tube to Pipe Coupling Legend Valve 313-215NL Pack Joint Union
Replacement Fan Assembly for the 20,000 BTU through 30,000 BTU - Mr. Heater  - Vent Free Heaters 2016 & UP. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
VALVE BALL BRASS 1INX1IN      Conbraco APPB10012 Apollo Conbraco APPR10012 Apollo
High quality forged brass ball valve with SharkBite connections. The SharkBite connections allow the user to connect the ball valves to copper tubing, CPVC, and PEX in seconds. Convenient single lever control makes it easy to use and encourages shut-off of water supply. Instant push-fit connections for increased ease of use - no soldering, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 200 degrees F (water). Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems.
Conbraco APPW10012 Apollo PIPE PEXA 1/2IN X 100FT WHITE PIPE PEXA 1/2IN X 100FT RED
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Colored print line denotes color of pipe (black print for white pipe). Colored print line denotes color of pipe (black print for white pipe).
PIPE PEXA 1/2IN X 100FT BLUE  Anderson Metal 754044-08 Brass Flare Tee Legend Valve T-4433 Tube Bend
Colored print line denotes color of pipe (black print for white pipe). UPC individually bagged. Legend Valve Tube Bend, Series: T-4433, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems
Anderson Metal 754018-08 Brass Flare Fittings Anderson Metal 757422-1204 Brass Compression Adapter Legend 313-155NL Water Service Fitting
UPC individually bagged. UPC individually bagged. Bronze body and compression nut, stainless steel pipe gripper.
Sharkbite APPB2012 Straight Pex Tubing Sharkbite APPR2012 Straight Pex Tubing Legend Valve 313-220NL Pack Joint Union
Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Cross-linked, high-density polyethylene tubing for use in hot and cold potable water distribution systems. Legend Valve Pack Joint Union, 1 X 3/4 in Nominal, CTS X CTS End, Brass/Copper
Anderson Metal 754059-080806 Brass Flare Tee Legend Valve 313-244NL Pack Joint Union Mueller ProLine Full Port Ball Valve
UPC individually bagged. Legend Valve Pack Joint Union, 3/4 in Nominal, IPS X IPS End, Copper -20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated ball and stem, CSA certified to ASME B16.33 (5G) and B16.44 (125G), CR91-002 (1/2, 2, & 5 psig), UL gas shutoff valve (YRPV), UL manual valves (MHKZ), UL compressed gas shutoff valve (YQNZ), UL flammable liquid shutoff valve (YRBX), UL LP-gas shutoff valve (YSDT), FM approved, threaded ends comply with ANSI B1.20.1, IAMPO listed to cUPC, certified to NSF 61-G.
DuraHeat TT-15S Single Burner Tank Top Heater Legend Valve T-4411 Tube Bend Mueller ProLine Full Port Ball Valve
Heavy steel construction. Outdoor heaters are the perfect solution to cold weather work and play!  They attach easily to a standard 20lb LP cylinder. (CYLINDER NOT INCLUDED) to provide instant infra-red heat. Includes adjustable control valve and CSA Certified safety tip function on CSA models. 9 -13-15,000 BTU's. Match light. Legend Valve Tube Bend, Series: T-4411, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems -40 to 194 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAMPO IGC 157 certified, IAPMO listed to cUPC, certified to NSF 61-G.
Mueller ProLine Full Port Ball Valve World Marketing 20-7010 Gas Install Kit Legend Valve 313-384NL Pack Joint Tee
-20 to 300 degrees F temperature range, full port, packing gland, PTFE seat and packing, chrome-plated brass ball and stem, solder ends comply with ANSI B16.18, IAPMO listed to cUPC, certified to NSF 61-G. Gas Appliance Installation Kit.  Includes 1/2" Gas Flex Connection 24", 3/8" & 1/2" Adapter Fittings, Pipe Sealant.  For Kozy- World, GloWarm, Comfort Glo, and gas heater and fireplace installation. Legend Valve Pack Joint Tee, 3/4 in Nominal, CTS X MIP End, Copper
BLOWER M SERIES HEATERS       Anderson Metal 754014-12 Brass Flare Fitting Legend Valve T-4410 Tube Bend