Home > HEATING & COOLING > HEAT & AIR CONDITIONING > HEATERS > KEROSENE HEATER ACCESSORIES
Sort By:
1
Anderson Metal 754042-05 Brass Flare Union BrassCraft 294F Half Union Adapter BrassCraft 293M Half Union Adapter
UPC individually bagged. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
BrassCraft MAU1-10-8 Gas Adapter World Marketing 602A Manual Siphon Pump BrassCraft MAU2-10-8 Gas Adapter
Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. Necessary for transfer of fuel from storage tank to heater. Easy to operate utilizing a large ball type siphon. Compatible with all types of kerosene heaters. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
American Valve P230 1/2 PVC Fitting KBI Flo Control ProGuard Tube To Pipe Adapter Anderson Metal 54802-06 Brass Flare Fittings
AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Two piece construction - nut and body. Use with copper, brass, aluminum, or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Resists mechanical pullout. Easy to disassemble and can be re-assembled many times with no effect on the seal. No flaring tool required. Primary uses fuel equipment, plumbing, gases refrigeration, and vacuum. UPC individually bagged.
Anderson Metals 730061-10 Compression Nut BrassCraft PSSL-14 Gas Dryer Adapter BrassCraft PSSC-62 Gas Supply Adapter
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D For corrugated tube. Recommended for gas range connections.
FITTING ADAPTER GAS 3/8IN MIP BrassCraft PSSC-66 Gas Supply Adapter American Valve P230 3/4 PVC Fitting
3/8" OD Flare x 3/8" MIP tapped 1/8 FIP. For use with gas appliances. For corrugated tube. Recommended for gas range connections. AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
BrassCraft PSSL-16 Gas Supply Union Brass-Craft FU3-6 Pipe Union KBI Flo Control ProGuard Tube To Pipe Adapter
For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
Brass-Craft PSSC-63 Male Half Union BrassCraft MAU1-10-12 Gas Adapter BrassCraft MAU2-10-12 Gas Adapter
For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
Anderson 754055-06 2-Way Tube Elbow Brass-Craft PSSL-15 Female Pipe Union BrassCraft 2294M Half Union Adapter
UPC individually bagged. For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414.
Brass-Craft PSSC-64 Male Half Union Brass-Craft PSSD-43 Male Half Union NDS CPT-0500-S PVC Compression Run Tees
For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. For 3/8'' ID (1/2'' OD) corrugated tube. Recommended for fixed air heater, gas range, furnace, and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8'' FIP thread. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
KBI Flo Control ProGuard Tube To Pipe Adapter NDS CPT-0500-T PVC Compression Run Tees World Marketing DH-31 B Style Replacement Kerosene Igniter
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Pins in same direction as heating coil. Fits Dura Heat, Dyna-Glo, Envirotemp, Kero Heat*, Kero-World*. Fits many push type ignition assemblies. Redstone.
BrassCraft PSSD-42 Gas Supply Union BrassCraft M40-10 Gas Tube Cap World Marketing DH-30 A Style Replacement Kerosene Igniter
For 3/8'' I.D. (1/2'' OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces, and water heater connections. Use with PlumbShop SD or RSD Series connectors. For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures. Up to 1/2 psi maximum. Pins in opposite direction of heating coil. Fits Aladdin, Comfort Glow, Corona, Kero-Sun, Kero Heat, Sears, Toyotomi.
Anderson Metal 754042-10 Brass Flare Union Anderson 754050-0806 Tube Elbow Anderson 54840-06 Space Heater Tube Cap
UPC individually bagged. UPC individually bagged. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
NDS CPT-0750-S PVC Compression Run Tees NDS CPT-0750-T PVC Compression Run Tees American Valve P230 1 PVC Fitting
Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
NDS CPT-1000-S PVC Compression Run Tees NDS CPT-1000-T PVC Compression Run Tees Anderson 54806-0606 Tube To Pipe Coupling
Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged.
Abbott Rubber 9001P-200 Lightweight Non-Toxic Tubing KBI Flo Control ProGuard Tube To Pipe Adapter PlumbPak PP855-21 Tubing
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries 1/4" x 25' poly tubing.
World Marketing 501/21017K Kerosene Replacement Wick KBI Flo Control ProGuard Tube To Pipe Adapter Anderson 54800-06 Space Heater Tube Nut
For: ARTURO A.P.I. YD818. CORONA SS-DK and SS-DX. COSY 200. FLAME-GLO 90. HENRY ISLAND RB-2. KERO-SOLAR KMI-80.  KERO-SUN Omni 15 and Moonlighter (PRE H). KEYMAR KM-80 and Sundowner. KOGY 200. KOZY 200. MULTIPLEX (Yeih Tung) YD-818. NOBLE Queen. NORTHSTAR RB-2 Rainbow. PROSPERITY II HT-01 and CKH-3900. SAMARITAN S8700. SUNBEAM (NORTHERN) 3621. SUNNY 200/Cosy. TOYOSTOVE/TOYOTOMI RB2A and TSC15. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-3/4 in Length X 2 in Width X 2-1/4 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries 9/16-24 thread. Bagged with flag tag.
World Marketing 20401U Kerosene Replacement Wick World Marketing 48015 Kerosene Replacement Wick World Marketing 504K Kerosene Replacement Wick
For: AMERICAN WICK AWHR-1100, 1101 and AWRF-1140. DURAHEAT DH1000-1011,  and DH1100. DYNA-GLO 31494, 31495, CT1200, RMC-55R, 55R7,  55R7B and RMC-65F. ENVIROTEMP 30492 (CT1100), 31494, 31495 (CT1200,CT1300F) RMC-55R, RMC-65F and RF-1300. HEAT MATE HMHR1101 and HMRF1140. KERO-HEAT CT1100, CT1200, 1300F, 30492 and RF1140. KERO JET SCT1100. KERO-WORLD KW-11(B-F), KC1100-1104 SENGOKU CT1100. TOYOKUNI 26EU. MEGA 110. REDSTONE RMC-55R7, 557B For: COMFORT TEMP (Golden Glo) GG8420. HEAT BUSTER HB-105. KEROVIC 98-KV01. KNAPP MONARCH 18-2616-58, 18-2619-91 and 18-2614-91. NOVA Nine. ROBESON 2602-38, 2602-49, 2609-04, 2604-38, 2614-91, 2602-35, 2605-38, 2609-58, 2611-58, 2619-91, 2616-58, RAD10800 and 2610-58. TOSHIBA KSE-2150 and KSR28FE. TURCO 2000, 2001, 2005, 2006, 2007, 2008, 2010, 2016. VAN WYCK (see also Robeson) 2602-38 (RAD 10500). For: BANDO BK96. COMMANDER CH-96. EASY 2220 and 2000. FANCO RAD9600,CART100 and CART96. GEMINI III SYK10000. GOLD STAR 50-50. HEAT MATE K-5 and K-10. IMARFLEX 10000, 10500 and 11000. KERAY (Ker-O-Ray) Hawaiian. KERO-HEAT CT1400, CT1500, IT1000. KERO-SOLAR Master, KMI-81 and KMI-82. KERO-SUN Radiant 8, 10A-M and 22. LITWIN (Comfortor) C110 and C150. LOUDI F960 Yukon. MULTIPLEX (Yeih Tung) HT-02 and YD-789. PORTA-HEAT SYK-10,000. PROSPERITY II HT-02 and CKH-4900. ROBESON 2601-32, 2602-32, R9600, R10500, RAD20. SAMARITAN S8200 and SR9600. SUNSTAR EZ2220. TOYOSET (BY KERO-SUN) R96. TOYOSTOVE/TOYOTOMI RSA10G, 10, RC11, RSA21, RSA23, RSA24, RSA50, RSA85, RSA25A, TSR22, RSA8Radiant 8. VAN WYCK (see also Robeson) 2601-32 and 2602-32 (RA R9600).
World Marketing 505K Kerosene Replacement Wick World Marketing 502K Kerosene Replacement Wick World Marketing 27506 Kerosene Replacement Wick
For: COMMANDER CH-100. ENVIROTEMP 30499 (R100 and RF110). KERO-SUN Radiant 36, SSTRM and R110. TOUCH & GLOW 2220 and 2850. TOYOSET (BY KERO-SUN) R100 and R110. TOYOSTOVE/TOYOTOMI RCA36, 36F, RCA37 and 37F. For: COSY 260 and 500. KERO-SUN Omni 85D, 85E, 85F, 85G and 85H. NORTHSTAR KSA-851. SAMARITAN S1300. TOYOSTOVE/TOYOTOMI KSA85D, KSA851D and KSA851E. For: ALADDIN B131 Temprite 8, S181 Tropic and S281 Temprite 7. ARTIFEX S100. FUJIKA (Fujica) KS-2A, KSG-175A and Young. KERAY (Ker-O-Ray) Survivor I, II and III. PERFECTION PSR-8 and 80W. RADIANT KING RK-70, 75 and 110. SHARP HSR-23F and 24F. SUNSHINE (Emerson) R-800. WESTERN AUTO/CITATION SCJ2012 and SCJ2013.
World Marketing 27500 Kerosene Replacement Wick World Marketing 503K Kerosene Replacement Wick World Marketing 11002 Kerosene Replacement Wick
For: ALADDIN B231, S471 Temprite 95, B331 Temprite 11, J480 Happy II, S481 and C481 Temprite 10. BOMBARDIER CR10 and R12. FUJIKA (Fujica) KSF225. KERAY (Ker-O-Ray) Tahitian DX. SHARP HSR-31F, 48D, 88F and 200. SUN HOUSEWARES K100. SUNSHINE (Emerson) R-1200. WESTERN AUTO/CITATION SCJ2015 and SCJ2016. For: BANDO BK195. COSY 100. EASY 4570 and 100. ENERGY STAR EKS198C. FLAME-GLO 910. GEMINI III SYK20000. HEAT BUSTER HB-1950. KERO-SUN Omni 105E, 105F, 105G, 105H, 105I and Director. KOGY 100. KOZY 100. NOBLE King. NORTHSTAR KSA-105. NOVA One. PORTA-HEAT SYK-20000. SAMARITAN S19500. SUNNY 100/Cosy. SUNSTAR BK-195. TOYOSTOVE/TOYOTOMI KSA105E, KSA105F, KSA105G, KSA105H and KSA105I. For: ALADDIN J580 Mark II. ARTURO A.P.I. KF3200. ENVIROTEMP 30477 and 30487 (PTE-4). EVERGLO PTE4, 30477 and 30487. FUJIKA (Fujica) KF3200A, KS-4A and Mark II. FUTURA FH31/E4 Queen. HENRY ISLAND FH-31/PT-E4 Queen. KENROY (KERO HEAT) 10500 and 10-5R. LESLIE LOCKE (Warm up Squad) KH7. MEGA PTE4. SUN HOUSEWARES K102.  YUASA Sunglow 30.
World Marketing 29013 Kerosene Replacement Wick World Marketing 28030 Kerosene Replacement Wick World Marketing 28048 Kerosene Replacement Wick
For: AMERICANA AR100. AMERICAN WICK 30462. ARTIFEX S200. AVANTI KH10. CODEP 5700. COMFORT GLOW SR10. ENVIROTEMP 30462 (9500 BTU) and 30471 (SPR10). FLAME-GLO 920 and 926. GERALD GHR95, GH12 and GH14. HALLMARK HSC98. HAMAI HKS24 and HKF100. HANSON 5700. HEATMORE A7000, A9000 and A9600. KEROTECH Companion, Resident and Sable. KOZY 500. NORTHSTAR NS-95. SAGA 200. SANYO OHR85B, OHRG25, 25A, OHR261, OHR1010, OHR1020, OHR280, OHRG28H and 28. Sears 260011, 35001, 40220.  Sunbeam 3601, 3602, 3603, 3606. SUNWISE SPR10, SPR95 and 30471. YUASA J10 and J20. For: CORONA SX3, 3C, 3FC, SPDX, SPDK and SX5. KEYMAR RM-1270 and Sunseeker. SUN AIR GLOW US-9-5 and US-11-5. Replacement wick, fits models Kero-World KC1208, DynaGlo RMC-11C, 11C7, DuraHeat DH1050.
World Marketing 28038 Kerosene Replacement Wick NDS CPT-1250-T PVC Compression Run Tees Abbott Rubber 7101P/PSVTR32-200 Lightweight Tubing
For: ALOHA JY1120. ARTURO A.P.I. JY1120. COMFORT TEMP (Golden Glo) GG8445. CORONA 11DK, A, 17DK, B, C and SL11DK. KEYMAR KM-180 and Sunfire. SUN AIR GLOW US-18-7. NDS Pipe Tee, 1-1/4 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 2.67 in Outside Dia, 6-1/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
World Marketing 27522 Kerosene Replacement Wick World Marketing 509 Kerosene Replacement Wick World Marketing 28032 Kerosene Replacement Wick
For: ALADDIN B431, B531, B631, Temprite 15, S331 Supra 300, S431 Supra 400, S571 Temprite 15, TR5000, S681 Equator II, TR7000, Temprite 16, B631 and Temp. 20. BOMBARDIER C20 and R15. RADIANT KING RK420 and 450. SUNSHINE (Emerson) C-1500. WESTERN AUTO/CITATION SCJ2017 and SCJ2020. For: ENVIROTEMP 30494, 30497 (R101, RF111). KOGY 500. SEARS 35135, SC150, 35021 and 50212. For: ALADDIN TR6000 (TR6020). ALOHA JY1130. ARTURO A.P.I. JY1130. COMFORT GLOW C22600. COMFORT TEMP (Golden Glo) GG8440. CORONA 22DK, A, B, C, XLDK and 30465. ENVIROTEMP 30465 (22DK). HEAT MATE 2200. HENRY ISLAND Magnum. KERAY (Ker-O-Ray) Husky 2. KERO-WORLD KW-23. LOUDI E196 Husky. MAGNUM 22 and 23. NORTHSTAR NS-22. SEARS 35111. SUN AIR GLOW US-23-5. TEKNIKA 2000.
World Marketing 29001 Kerosene Replacement Wick NDS CPT-1500-T PVC Compression Run Tees World Marketing 20430 Kerosene Replacement Wick
For: AMERICANA AC200, AR140 and HSC180. ARTIFEX S300. AVANTI KH20. CODEP 5800. COMFORT GLOW SR14. COSY 420 and 510. EGAWA HKS-50 and HK-350. ENERGY STAR EKS146C. ENVIROTEMP 30464 (18000 BTU) (AC30). FLAME-GLO 942,950. GERALD GHR180, GH16, GH18. HALLMARK HSC180. HAMAI HKS50 and HKS60. HANSON 5800. HEAT GLOW SK150 and 152C. KEROTECH Beacon 180 and 45. SAGA 300. SANYO OHC420, 42A, OHC510, OHR300, OHR1210, OHRG30A, OHR41H and OHR1410. Sears 35002, 40218, 40219, 40316.  Sunbeam(northern) 3623, 3625, 3627, 5800. SUNWISE SPC180. YUASA J37, J40 and J50. NDS Pipe Tee, 1-1/2 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 3.01 in Outside Dia, 6-3/4 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Replacement wick.  Fits the following kerosene heater models: KeroWorld KW-12, KC1211. DuraHeat DH1051 and Redstone WK11C8.
World Marketing 32000 Kerosene Replacement Wick World Marketing 32225 Kerosene Replacement Wick World Marketing 510 Kerosene Replacement Wick
For: AMERICAN WICK AWHC-2230 and AWOR-2000. COMFORT GLOW C20000, GC19 and R15000. CRESTLINE 38, 803 and 881. ENERGY MART EM51C. ENVIROTEMP 30496 (CV2230). FANCO CONV22. HANDY MASTER HM-19. HEAT MATE HMHC2230 and K-20. IMARFLEX 20000, 21000 and 22000. KERO-HEAT CV2000, 2200, 2230, 30496 and 250. KERO JET SCV2230. KOEHRING KC-19. LITWIN (Comfortor) C 200. ROBESON 2603-32, C20000 and KHZ-2620WG. ROBESON 2622, 2623, 2620 and 2618. Sears 40302, 40314, 35100, 40315, 40317. SENGOKU CV2230. TOUCH & GLOW CR15 and K-20. VAN WYCK (see also Robeson) 2603-32 (CONV 2000). For: Dura Heat DH2404S, DH2400-2400S. Dyna Glo 95C2, 95C4, 96B, 96C, Wk95C6C, WK95C8, 8B, 8C, 8RB.  Kero World KC2400-KC2404b. ENVIROTEMP 93043 (RMC-95C). Redstone WK95C6R. For: ENVIROTEMP 30498 (O200). KERO-SUN DC-90 and O-200. SEARS 35175 and SC200. KERO SUN O85I-L, SSTRM II, R10N, O, R101, RF111, R40A-D. TOYOSET(By Kero Sun) R101, R40A-D, R111, RF111, SSTRM II.  TOYOSTOVE/TOYOTOMI DC60, DC80, DR86, DR86F, RC11D, RSA850, RC41, RC41F, RCA87, R400, SC-150. KERO SUN O85I-L, SSTRM II, R10N, O, R101, RF111, R40A-D. TOYOSET(By Kero Sun) R101, R40A-D, R111, RF111, SSTRM II.  TOYOSTOVE/TOYOTOMI DC60, DC80, DR86, DR86F, RC11D, RSA850, RC41, RC41F, RCA87, R400, SC-150.
NDS CPT-2000-T PVC Compression Run Tees World Marketing 508 Kerosene Replacement Wick World Marketing 601KWK Cordless Siphon Pump
NDS Pipe Tee, 2 in Nominal Size, Compression x Threaded, 2.41 in Inside Dia, 3.72 in Outside Dia, 7-1/2 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified For: ENVIROTEMP 30495 (O230) and SEARS 35102 (SC-230). KERO SUN O105M, N, O120A, B, O230, 30495.  TOYOSET(By Kero Sun) O230, SC-230.  TOYOSTOVE/TOYOTOMI KSA120, WC105E, R, WC-120. Necessary for transfer of fuel from storage tank to heater. Powered by 2-D cell batteries. Batteries not included. Convenient on/off switch.  Compatible with all types of kerosene heaters.
World Marketing 28033 Kerosene Replacement Wick World Marketing 28040 Kerosene Replacement Wick Anderson Metals 730061-03 Compression Nut
For: AMERICAN WICK AWHC2323. COMFORT GLOW C22800 (pins). CORONA 23DK and 30441. ENVIROTEMP 30441 (23DK). KERO-WORLD KW-23B. MEDALLION AWHC-2323. ROBESON KH5-2623WG (23,000). SEARS 35112. For: AMERICAN WICK AWHR-2010. COMFORT GLOW SX-2E. CORONA SX-2E and SX-2EF. KERO-WORLD KW-10. MEDALLION AWHR-2010. ROBESON KH6-2624WG. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metal 750082-0604 Brass Compression World Marketing 32444 Kerosene Replacement Wick Spartan 20010 Lightweight Flexible Pipe
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. FOR TOP ONLY. For: COMFORT GLOW GRW8B, GR8X, GR9, A, B, R10000, GRF9A and B (compl). ENERGY MART EM-M221 and EM-F221 (compl). KOEHRING KRB-93A, KR-9, KRD-93, KRF-9, KRF-93, KRF-93A (compl), 9300 Deluxe (compl). NATIONAL OS222 and OS2300R (compl). PANASONIC Top only of 2 Piece Assembly, OSF224X, OS10RF and OS9R. Sears 40202, 40204, 40205, 40208, 40209, 40211, 40212, 40216. TOUCH & GLOW CR-8 and CR-9 (compl). Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
Anderson 54806-0608 Tube To Pipe Coupling Anderson Metal 54808-0606 Flare Tube Fittings Anderson Metal 754042-04 Brass Flare Union
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. UPC individually bagged.
Anderson Metals 730061-04 Compression Nut Anderson Metal 754056-0604 Brass Flare Fitting Anderson Metal 54808-0608 Flare Tube Fittings
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. UPC individually bagged. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
Abbott Rubber 9002P Lightweight Non-Toxic Tubing Anderson Metal 754042-08 Brass Flare Fittings BASE M SERIES HEATER 20K - 30K
Procom PF09B Heater Bases
Our Price: $20.60
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture. UPC individually bagged. Used for floor mounting all Procom heaters that produce more than 10,000 BTU?s of heat.
BrassCraft FO-6 Tube Nut Anderson Metals 754070-04 Swivel Tube to Hose Adapter Anderson Metals 730061-05 Compression Nut
3/8" O.D. tube. UPC individually bagged. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Abbott Rubber 7001P Lightweight Tubing Anderson Metal 750082-0806 Brass Compression Spartan 20020 Lightweight Flexible Pipe
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
PIPE POLY 160LB 1/2IN X 100FT Cresline 18205 Flexible Pipe Anderson Metals 730061-06 Compression Nut
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Cresline 18335 Flexible Pipe Anderson Metals 754070-06 Swivel Tube to Hose Adapter World Marketing 24-3508 Thermocouple
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. UPC individually bagged. 800mm. Fits all Kozy-World pre 2015 vent-free wall heaters.
Anderson Metal 754056-0806 Brass Flare Fitting Cresline 18105 Flexible Pipe Anderson 754049-0608 Tube Elbow
UPC individually bagged. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. UPC individually bagged.
Abbott Rubber 7002P/PSVTR52-100 Lightweight Tubing Anderson 754049-0402 Tube Elbow Anderson Metal 750062-04 Brass Compression Fittings
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. UPC individually bagged. Anderson Tube Full Union, 1/4 in Nominal Size, Compression, Brass
Anderson Metal 750082-1006 Brass Compression Union Cresline 18515 Flexible Tubing Abbott Rubber 9003P/PSPTR6-100 Lightweight Non-Toxic Tubing
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901 For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
TUBING POLY CE BLU CTS 3/4X100 Anderson Metal 750062-08 Brass Compression Fittings Anderson Metal 754056-1008 Brass Flare Reducing Union
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901 Anderson Tube Full Union, 1/2 in Nominal Size, Compression, Brass UPC individually bagged.
Spartan 20030 Lightweight Flexible Pipe Anderson 754049-0404 Tube Elbow Anderson 754049-0808 Tube Elbow
Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less. UPC individually bagged. UPC individually bagged.
Anderson Metal 54844-06 Flare Tube Fitting Anderson 754049-0806 Tube Elbow Anderson 754055-08 2-Way Tube Elbow
9/16''-24 fine thread flare end for space heaters. UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson 754050-0808 Tube Elbow BLOWER VENT FREE  FITS ALL2016 World Marketing 32400 Kerosene Replacement Wick
UPC individually bagged. Replacement Fan Assembly for the 20,000 BTU through 30,000 BTU - Mr. Heater  - Vent Free Heaters 2016 & UP. For: COMFORT GLOW GRW8B, GR8X, GR9, A, B, R10000, GRF9A and B (compl). CRESTLINE 35, 303 and 531. ENERGY MART EM-M221 and EM-F221 (compl). HANDY MASTER HM-10 (complete ass'y). KOEHRING KRB-93A, KR-9, KRD-93, KRF-9, KRF-93, KRF-93A (compl), 9300 Deluxe (compl). NATIONAL OS222 and OS2300R (compl). PANASONIC 2 Piece Complete Assembly, OSF224X, OS10RF and OS9R. SEARS 40, 202, 402, 044, 020, 500, 209, 114, 021, 200 and 000. TOUCH & GLOW CR-8 and CR-9 (compl).
World Marketing 27512 Kerosene Replacement Wick Anderson Metal 750082-1008 Brass Compression Union Anderson Metal 750062-03 Brass Compression Fitting
For: ALADDIN S581 Equator I. ENVIROTEMP 30483 (200E). HART 20000. PERFECTION PSR-15 and 150W. RADIANT KING RK-500. SUNSHINE (Emerson) C-1500 (metal band). TOYOKUNI 90EA, 90EGQ, 90EU, 96EU and 200EU. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble - no flaring tool required. Primarily used for water, gasoline, oil, and vacuum lines. UPC individually bagged. Anderson Tube Full Union, 3/16 in Nominal Size, Compression, Brass
Anderson Metals 730061-08 Compression Nut Abbott Rubber 7003P/PSVTR68-100 Lightweight Tubing Anderson Metals 754070-08 Swivel Tube to Hose Adapter
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. UPC individually bagged.
Anderson Metal 750062-10 Brass Compression Fittings Anderson Metal 750062-06 Brass Compression Fittings Anderson 754049-0604 Reducing Tube Elbow
Anderson Tube Full Union, 5/8 in Nominal Size, Compression, Brass Anderson Tube Full Union, 3/8 in Nominal Size, Compression, Brass UPC individually bagged.
Anderson Metals 754070-10 Swivel Tube to Hose Adapter Anderson Metal 754042-06 Brass Flare Fittings Abbott Rubber 9004P Lightweight Non-Toxic Tubing
UPC individually bagged. UPC individually bagged. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
Anderson 754050-0812 Tube Elbow Anderson Metal 750062-05 Brass Compression Fitting Anderson Metals 750061-14 Compression Nut
UPC individually bagged. Anderson Tube Full Union, 5/16 in Nominal Size, Compression, Brass Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Abbott Rubber 7005P/PSVTR86-100 Lightweight Tubing Cresline 18215 Flexible Pipe Anderson 754049-1008 Reducing Tube Elbow
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. UPC individually bagged.
Anderson 754050-0606 Tube Elbow Cresline 18005 Flexible Pipe Abbott Rubber 7004P/PSVTR75-100 Lightweight Tubing
UPC individually bagged. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Abbott Rubber RVIG Non-Toxic Tubing Abbott Rubber RVBIG Non-Toxic Tubing Cresline 18355 Flexible Pipe
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. General purpose grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
Abbott Rubber RVEB Non-Toxic Tubing World Marketing 20-7010 Gas Install Kit BLOWER M SERIES HEATERS
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Gas Appliance Installation Kit.  Includes 1/2" Gas Flex Connection 24", 3/8" & 1/2" Adapter Fittings, Pipe Sealant.  For Kozy- World, GloWarm, Comfort Glo, and gas heater and fireplace installation. For use with all Procom heaters that produce more than 10,000 BTU?s of heat.  It offers either manual or thermostatic control, and does require electricity.
Abbott Rubber RVDC Non-Toxic Tubing Cresline 18535 Flexible Tubing TUBING POLY CE BLUE CTS 1X100
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901 For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high density, manufactured from select resins. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.AWWA C-901
Anderson Metal 50862-04 Brass Compression Union Anderson 754055-10 2-Way Tube Elbow TUBING POLY SIDR-7 HD 3/4X100
UPC individually bagged. UPC individually bagged. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
Anderson 754049-0606 Tube Elbow Anderson 754050-1008 Reducing Tube Elbow Abbott Rubber RVJG Non-Toxic Tubing
UPC individually bagged. UPC individually bagged. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
Abbott Rubber 7006P/PSVTR108-10 Lightweight Tubing Cresline 18115 Flexible Pipe Spartan 20040 Lightweight Flexible Pipe
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
Anderson 754050-0608 Tube Elbow Anderson 54748-1508 Tube To Pipe Connector Anderson 754049-1012 Tube Elbow
UPC individually bagged. 15/16''-16 thread for brass range connectors. UPC individually bagged. UPC individually bagged.
Abbott Rubber RVKI Non-Toxic Tubing Anderson 54746-1508 Tube To Pipe Coupling Spartan 20015 Lightweight Flexible Pipe
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
Cresline 18015 Flexible Pipe Abbott Rubber RVBKI Non-Toxic Tubing Abbott Rubber 7044P/PSVTR85-100 Lightweight Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. General purpose grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Cresline 18225 Flexible Pipe Abbott Rubber RVLI Non-Toxic Tubing Anderson 754050-1012 Tube Elbow
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. UPC individually bagged.
Abbott Rubber RPEB Lightweight Non-Toxic Tubing Abbott Rubber RPBEB Tubing Abbott Rubber 9005P/PSPTR10-50 Lightweight Non-Toxic Tubing
FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings. Suitable for use with air and water lines. Use as pneumatic control line. For use with compression style fittings. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, light weight, and resistant to stress cracking, it forms a solid barrier to gases, vapor, and moisture.
Abbott Rubber A14000TB Piliable Air Hose Cresline 18375 Flexible Pipe Anderson 754049-0812 Tube Elbow
Light weight construction, suitable for air, water, and spray applications, contractor grade, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. UPC individually bagged.
Abbott Rubber 7045P/PSVTR69-100 Lightweight Tubing Abbott Rubber RPFD Lightweight Non-Toxic Tubing Spartan 21050 Lightweight Flexible Pipe
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
Abbott Rubber RBBO Flexible Bilge Discharge Hose PIPE POLY 160LB 1/2IN X 400FT Anderson 54748-1512 Tube To Pipe Connector
Curshproof, suitable for marine and low pressure discharge, abrasion and kink resistant, no fittings necessary. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. 15/16''-16 thread for brass range connectors. UPC individually bagged.
Anderson 54746-1512 Tube To Pipe Coupling Abbott Rubber RBBP Flexible Bilge Sump Hose Abbott Rubber RPIG Lightweight Non-Toxic Tubing
Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Curshproof, suitable for marine and low pressure discharge, abrasion and kink resistant, no fittings necessary. FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings.
Abbott Rubber A38000TB Piliable Air Hose Anderson Metal 750062-14 Brass Compression Fittings TUBING POLY SIDR-7 HD 1X100FT
Light weight construction, suitable for air, water, and spray applications, contractor grade, for use with hose barbs and clamps. Anderson Tube Union, 7/8 in Nominal Size, Compression, Brass PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
Abbott Rubber RVHF Non-Toxic Tubing Cresline 18125 Flexible Pipe Spartan 20035 Lightweight Flexible Pipe
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less.
Abbott Rubber RPGE Lightweight Non-Toxic Tubing Cresline 18340 Flexible Pipe Abbott Rubber RVLK Non-Toxic Tubing
FDA Grade, suitable for use with air and water lines, use as pneumatic control line, for use with compression style fittings. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
Abbott Rubber 7013P Lightweight Tubing Spartan 20025 Lightweight Flexible Pipe Abbott Rubber 7010P/PSVTR1612-5 Lightweight Tubing
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
PIPE POLY 125LB 3/4IN X 400FT Abbott Rubber RVGE Non-Toxic Tubing Abbott Rubber RVFD Non-Toxic Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
Abbott Rubber 10011P Braided Hose Spartan 21060 Lightweight Flexible Pipe Abbott Rubber 7011P/PSVTR1620-5 Lightweight Tubing
FDA grade, suitable for use with liquid  transfer, pneumatic and vacuum line, for use with hose barbs and clamps. Lightweight, low pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperatures working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Abbott Rubber RVMK Non-Toxic Tubing KeroKlean PW-11 Kerosene Additive Abbott Rubber RAKG Air Hose
FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Helps eliminate pollutants, emissions, and kerosene odor, and increases combustion for longer wick life.  Helps eliminate moisture problems.  8 ounce bottle treats 80 gallons of kerosene.  Child - proof cap. Assortment includes vanilla, cinnamon, pine and hollyberry scents. DO NOT SPECIFY COLOR. Light weight construction, suitable for air, water, and spray applications, contractor grade, for use with hose barbs and clamps.
Cresline 18220 Flexible Pipe Cresline 18135 Flexible Pipe Abbott Rubber A12000TB Piliable Air Hose
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. Light weight construction, suitable for air, water, and spray applications, contractor grade, for use with hose barbs and clamps.
Cresline 18110 Flexible Pipe Abbott Rubber 7007P/PSVTR128-10 Lightweight Tubing Abbott Rubber RBBR Flexible Bilge Discharge Hose
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less. FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Curshproof, suitable for marine and low pressure discharge, abrasion and kink resistant, no fittings necessary.
Abbott Rubber RALI Air Hose