Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > STOVE PIPE & ACCESSORIES > STOVE PIPE FITTINGS - BLACK
Choose a sub category:
GAS VALVES GAS VALVES POLYETHYLENE TUBING
POLYETHYLENE TUBING NEEDLE VALVES NEEDLE VALVES
PEX TUBING PEX TUBING FLAIR IT TUBING
FLAIR IT TUBING HOSE BIBBS HOSE BIBBS
BOILER DRAINS BOILER DRAINS VINYL TUBING
VINYL TUBING RUBBER TUBING RUBBER TUBING
STOP VALVES STOP VALVES STOP & WASTE VALVES
STOP & WASTE VALVES GLOBE VALVES GLOBE VALVES
WATER SUPPLY LINE VALVES WATER SUPPLY LINE VALVES BALL VALVES
BALL VALVES GATE VALVES GATE VALVES
CHECK VALVES CHECK VALVES FOOT VALVES
FOOT VALVES SILLCOCKS SILLCOCKS
FROSTPROOF SILLCOCKS FROSTPROOF SILLCOCKS YARD HYDRANTS
YARD HYDRANTS VALVE/SILLCOCK HANDLES VALVE/SILLCOCK HANDLES
VALVE BOXES & COVERS VALVE BOXES & COVERS MISC VALVES & FITTINGS
MISC VALVES & FITTINGS
Sort By:
1
World Marketing WC-2 Kerosene Heater Wick Chart WASHER WATER HEATER SUPPLY    Elkhart Products 31096 Copper Fittings
World Marketing Kerosene Heater Wick Chart Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" EPC Pipe Elbow, Solder, 1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
Elkhart 31194 Copper Fitting Anderson Metal 754042-05 Brass Flare Union Danco 88493 Water Heater Washer
Fitting to copper.  Bagged. UPC individually bagged. Water heater supply line washer.
Elkhart Products 31106 Copper Fittings Elkhart 31202 Copper Fitting Camco 11523 Drain Valves
EPC Pipe Elbow, Solder, 3/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Fitting to copper.  Bagged. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Elkhart 31090 Copper Fitting World Marketing 602A Manual Siphon Pump Camco Mfg 11061 Dip Tube
EPC Pipe Elbow, Solder, 3/8 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Necessary for transfer of fuel from storage tank to heater. Easy to operate utilizing a large ball type siphon. Compatible with all types of kerosene heaters. Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket.
Anderson Metal 54802-06 Brass Flare Fittings Camco 07133 Element Gasket Kit Elkhart 31206 Copper Fitting
Two piece construction - nut and body. Use with copper, brass, aluminum, or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Resists mechanical pullout. Easy to disassemble and can be re-assembled many times with no effect on the seal. No flaring tool required. Primary uses fuel equipment, plumbing, gases refrigeration, and vacuum. UPC individually bagged. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. Fitting to copper.  Bagged.
Flair-It 16050 Flexpex Pex Tubing Flair-It 16051 Flexpex B and K 168-003NL Dielectric Unions
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
BAND CHIMNEY UNIVERSAL DSP    World Marketing DH-31 B Style Replacement Kerosene Igniter World Marketing DH-30 A Style Replacement Kerosene Igniter
Used to conceal the crimped end on the last length in the system. Pins in same direction as heating coil. Fits Dura Heat, Dyna-Glo, Envirotemp, Kero Heat*, Kero-World*. Fits many push type ignition assemblies. Redstone. Pins in opposite direction of heating coil. Fits Aladdin, Comfort Glow, Corona, Kero-Sun, Kero Heat, Sears, Toyotomi.
Anderson Metal 754042-10 Brass Flare Union Camco 10623 Dielectric Nipple B K Industries 168-004NL Dielectric Unions
UPC individually bagged. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 2143 High Watt Density Water Heater Element CLAMP HOSE STL ASSORTMENT 40PC Elkhart 31120 Copper Fitting
UL Listed, gasket included. All the popular sizes in one convenient kit for use in securing hoses around pipes and for automotive uses, Worm gear type, Zinc-plated to resist rust and corrosion, Comes in a re-sealable divided PVC storage case. EPC Pipe Elbow, Solder, 1 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
WaterFlex 0437012 Corrugated Flexible Water Heater Connector Imperial BM0047 Stove Pipe Starter Joint Flair-It 16052 Flexpex Pex Tubing
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Used to connect two non-crimped ends of pipe together. Crimped on both ends. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 PSI at 73.4 degrees Fahrenheit, 100 PSI at 180 degrees, 80 PSI at 200 degrees. With blue markings. Bar coded.
Camco 07223 Adapter Kit B and K 167-004NL Dielectric Unions Mintcraft HCMAN06 Hose Clamps
Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCMAN04 Hose Clamps B and K 102-816 Water Heater Drain Valves Imperial BM0095 Trim Stove Pipe Collar
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Imperial BM0093 Trim Stove Pipe Collar Imperial BM0094 Trim Stove Pipe Collar Imperial BM0096 Trim Stove Pipe Collar
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Camco 2343 High Watt Density Water Heater Element Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp CopperFlex WB034-24N Corrugated Water Heater Connector
UL Listed, gasket included. Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Imperial BM0026 Adjustable Flue Stopper World Marketing 501/21017K Kerosene Replacement Wick Elkhart 31134 Copper Fitting
Used to cover existing flue hole. Adjustable anchors keep stopper securely in place. For: ARTURO A.P.I. YD818. CORONA SS-DK and SS-DX. COSY 200. FLAME-GLO 90. HENRY ISLAND RB-2. KERO-SOLAR KMI-80.  KERO-SUN Omni 15 and Moonlighter (PRE H). KEYMAR KM-80 and Sundowner. KOGY 200. KOZY 200. MULTIPLEX (Yeih Tung) YD-818. NOBLE Queen. NORTHSTAR RB-2 Rainbow. PROSPERITY II HT-01 and CKH-3900. SAMARITAN S8700. SUNBEAM (NORTHERN) 3621. SUNNY 200/Cosy. TOYOSTOVE/TOYOTOMI RB2A and TSC15. EPC Pipe Elbow, Solder, 1-1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Elkhart 31128 Copper Fitting Camco 7723 Dual Element Lower Water Heater Thermostat
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. EPC Pipe Elbow, Solder, 1-1/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat Camco 2203 High Watt Density Water Heater Element Camco Mfg 10473 Pressure Relief Valve 3/4 In
UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed, gasket included. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever.
Camco 4363 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element Imperial BM0151 Clean Out Crimped Stove Pipe Plug
UL Listed, gasket included. UL Listed, gasket included. Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection.
Imperial BM0049 Stove Pipe Starter Joint B and K Industries 168-005NL Dielectric Unions CopperFlex WB00-12N Water Heater Connector
Used to connect two non-crimped ends of pipe together. Crimped on both ends. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Elkhart 31212 Copper Fitting Camco 2293 High Watt Density Water Heater Element CONNECTOR SS 3/4F1960X3/4X18IN
Fitting to copper.  Bagged. UL Listed, gasket included.
Camco 2283 High Watt Density Water Heater Element Camco 2263 High Watt Density Water Heater Element World Marketing 20401U Kerosene Replacement Wick
UL Listed, gasket included. UL Listed, gasket included. For: AMERICAN WICK AWHR-1100, 1101 and AWRF-1140. DURAHEAT DH1000-1011,  and DH1100. DYNA-GLO 31494, 31495, CT1200, RMC-55R, 55R7,  55R7B and RMC-65F. ENVIROTEMP 30492 (CT1100), 31494, 31495 (CT1200,CT1300F) RMC-55R, RMC-65F and RF-1300. HEAT MATE HMHR1101 and HMRF1140. KERO-HEAT CT1100, CT1200, 1300F, 30492 and RF1140. KERO JET SCT1100. KERO-WORLD KW-11(B-F), KC1100-1104 SENGOKU CT1100. TOYOKUNI 26EU. MEGA 110. REDSTONE RMC-55R7, 557B
Camco 4383 High Watt Density Water Heater Element World Marketing 48015 Kerosene Replacement Wick Camco 4603 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. For: COMFORT TEMP (Golden Glo) GG8420. HEAT BUSTER HB-105. KEROVIC 98-KV01. KNAPP MONARCH 18-2616-58, 18-2619-91 and 18-2614-91. NOVA Nine. ROBESON 2602-38, 2602-49, 2609-04, 2604-38, 2614-91, 2602-35, 2605-38, 2609-58, 2611-58, 2619-91, 2616-58, RAD10800 and 2610-58. TOSHIBA KSE-2150 and KSR28FE. TURCO 2000, 2001, 2005, 2006, 2007, 2008, 2010, 2016. VAN WYCK (see also Robeson) 2602-38 (RAD 10500). High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
World Marketing 504K Kerosene Replacement Wick World Marketing 505K Kerosene Replacement Wick World Marketing 502K Kerosene Replacement Wick
For: BANDO BK96. COMMANDER CH-96. EASY 2220 and 2000. FANCO RAD9600,CART100 and CART96. GEMINI III SYK10000. GOLD STAR 50-50. HEAT MATE K-5 and K-10. IMARFLEX 10000, 10500 and 11000. KERAY (Ker-O-Ray) Hawaiian. KERO-HEAT CT1400, CT1500, IT1000. KERO-SOLAR Master, KMI-81 and KMI-82. KERO-SUN Radiant 8, 10A-M and 22. LITWIN (Comfortor) C110 and C150. LOUDI F960 Yukon. MULTIPLEX (Yeih Tung) HT-02 and YD-789. PORTA-HEAT SYK-10,000. PROSPERITY II HT-02 and CKH-4900. ROBESON 2601-32, 2602-32, R9600, R10500, RAD20. SAMARITAN S8200 and SR9600. SUNSTAR EZ2220. TOYOSET (BY KERO-SUN) R96. TOYOSTOVE/TOYOTOMI RSA10G, 10, RC11, RSA21, RSA23, RSA24, RSA50, RSA85, RSA25A, TSR22, RSA8Radiant 8. VAN WYCK (see also Robeson) 2601-32 and 2602-32 (RA R9600). For: COMMANDER CH-100. ENVIROTEMP 30499 (R100 and RF110). KERO-SUN Radiant 36, SSTRM and R110. TOUCH & GLOW 2220 and 2850. TOYOSET (BY KERO-SUN) R100 and R110. TOYOSTOVE/TOYOTOMI RCA36, 36F, RCA37 and 37F. For: COSY 260 and 500. KERO-SUN Omni 85D, 85E, 85F, 85G and 85H. NORTHSTAR KSA-851. SAMARITAN S1300. TOYOSTOVE/TOYOTOMI KSA85D, KSA851D and KSA851E.
Camco 3943 High Watt Density Water Heater Element Mintcraft HCMSS08 Hose Clamps Mintcraft HCMSS04 Hose Clamps
UL Listed, gasket included. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN06-3L Hose Clamp Mintcraft HCRAN08 Hose Clamps World Marketing 27506 Kerosene Replacement Wick
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. For: ALADDIN B131 Temprite 8, S181 Tropic and S281 Temprite 7. ARTIFEX S100. FUJIKA (Fujica) KS-2A, KSG-175A and Young. KERAY (Ker-O-Ray) Survivor I, II and III. PERFECTION PSR-8 and 80W. RADIANT KING RK-70, 75 and 110. SHARP HSR-23F and 24F. SUNSHINE (Emerson) R-800. WESTERN AUTO/CITATION SCJ2012 and SCJ2013.
Camco 2223 High Watt Density Water Heater Element Elkhart 31216 Copper Fitting World Marketing 27500 Kerosene Replacement Wick
UL Listed, gasket included. Fitting to copper.  Bagged. For: ALADDIN B231, S471 Temprite 95, B331 Temprite 11, J480 Happy II, S481 and C481 Temprite 10. BOMBARDIER CR10 and R12. FUJIKA (Fujica) KSF225. KERAY (Ker-O-Ray) Tahitian DX. SHARP HSR-31F, 48D, 88F and 200. SUN HOUSEWARES K100. SUNSHINE (Emerson) R-1200. WESTERN AUTO/CITATION SCJ2015 and SCJ2016.
Imperial BM0039 Stove Pipe Reducer World Marketing 503K Kerosene Replacement Wick Camco 01023 Flapper Style Dielectric Heat Trap
Connect oval stove opening with round pipe. For: BANDO BK195. COSY 100. EASY 4570 and 100. ENERGY STAR EKS198C. FLAME-GLO 910. GEMINI III SYK20000. HEAT BUSTER HB-1950. KERO-SUN Omni 105E, 105F, 105G, 105H, 105I and Director. KOGY 100. KOZY 100. NOBLE King. NORTHSTAR KSA-105. NOVA One. PORTA-HEAT SYK-20000. SAMARITAN S19500. SUNNY 100/Cosy. SUNSTAR BK-195. TOYOSTOVE/TOYOTOMI KSA105E, KSA105F, KSA105G, KSA105H and KSA105I. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP.
Elkhart 10156960 Copper Fitting World Marketing 11002 Kerosene Replacement Wick WaterFlex 0437024 Corrugated Flexible Water Heater Connector
EPC Pipe Tee, 1/2 in Nominal Size, Copper x Copper x Female, Wrot Copper For: ALADDIN J580 Mark II. ARTURO A.P.I. KF3200. ENVIROTEMP 30477 and 30487 (PTE-4). EVERGLO PTE4, 30477 and 30487. FUJIKA (Fujica) KF3200A, KS-4A and Mark II. FUTURA FH31/E4 Queen. HENRY ISLAND FH-31/PT-E4 Queen. KENROY (KERO HEAT) 10500 and 10-5R. LESLIE LOCKE (Warm up Squad) KH7. MEGA PTE4. SUN HOUSEWARES K102.  YUASA Sunglow 30. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Mintcraft HCRAN12 Hose Clamps CopperFlex WB00-15N Water Heater Connector World Marketing 29013 Kerosene Replacement Wick
1-piece stainless steel housing and band in precision engineered, interlocked construction. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. For: AMERICANA AR100. AMERICAN WICK 30462. ARTIFEX S200. AVANTI KH10. CODEP 5700. COMFORT GLOW SR10. ENVIROTEMP 30462 (9500 BTU) and 30471 (SPR10). FLAME-GLO 920 and 926. GERALD GHR95, GH12 and GH14. HALLMARK HSC98. HAMAI HKS24 and HKF100. HANSON 5700. HEATMORE A7000, A9000 and A9600. KEROTECH Companion, Resident and Sable. KOZY 500. NORTHSTAR NS-95. SAGA 200. SANYO OHR85B, OHRG25, 25A, OHR261, OHR1010, OHR1020, OHR280, OHRG28H and 28. Sears 260011, 35001, 40220.  Sunbeam 3601, 3602, 3603, 3606. SUNWISE SPR10, SPR95 and 30471. YUASA J10 and J20.
Camco 4503 High Watt Density Water Heater Element Camco 10063 Water Heater Connector Camco 4483 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 2583 Low Watt Density Water Heater Element Mintcraft HCRAN16-3L Hose Clamp Mintcraft HCRAN10 Hose Clamps
UL & CSA listed, gasket included. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Camco 2163 High Watt Density Water Heater Element Worldwide Sourcing PMB-270-3LF3L Ice Maker Installation Kits Camco 4523 High Watt Density Water Heater Element
UL Listed, gasket included. Ice maker installation kit, 1/4" outlet. Dimension: 13.31 x 21.26 x 25.58 in. UL Listed, gasket included.
World Marketing 28030 Kerosene Replacement Wick World Marketing 28048 Kerosene Replacement Wick Mintcraft HCRAN24 Hose Clamp
For: CORONA SX3, 3C, 3FC, SPDX, SPDK and SX5. KEYMAR RM-1270 and Sunseeker. SUN AIR GLOW US-9-5 and US-11-5. Replacement wick, fits models Kero-World KC1208, DynaGlo RMC-11C, 11C7, DuraHeat DH1050. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN20 Hose Clamp AMC Hei-1Sp Ice Maker Kit Mintcraft HCRAN32-3L Hose Clamps
AMC Hei-1Sp Ice Maker Kit
Our Price: $11.75
1-piece stainless steel housing and band in precision engineered, interlocked construction. Hook up water supply to existing ice maker in freezer. 25' Polyethylene tubing. (1) 104SCSD self-tapping saddle valve. (1) 62 1/4 compression union. (3) 60P 1/4 delrin sleeve. (3) 61P-1/4 brass insert. Bagged. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Plumb Pak PP855-20LF Ice Maker Kit CopperFlex WB00-18N Water Heater Connector Imperial BM0153 Clean Out Crimped Stove Pipe Plug
Includes: 25' poly tubing. All necessary fittings. Shut off valve and saddle valve. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection.
World Marketing 28038 Kerosene Replacement Wick Mintcraft HCRAN28 Hose Clamps Mintcraft HCRAN36 Hose Clamps
For: ALOHA JY1120. ARTURO A.P.I. JY1120. COMFORT TEMP (Golden Glo) GG8445. CORONA 11DK, A, 17DK, B, C and SL11DK. KEYMAR KM-180 and Sunfire. SUN AIR GLOW US-18-7. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Watts 100XL Temperature and Pressure Relief Valve Imperial BM0013 Adjustable Stove Pipe Elbow World Marketing 27522 Kerosene Replacement Wick
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Adjustable from 0 to 90 degrees. For: ALADDIN B431, B531, B631, Temprite 15, S331 Supra 300, S431 Supra 400, S571 Temprite 15, TR5000, S681 Equator II, TR7000, Temprite 16, B631 and Temp. 20. BOMBARDIER C20 and R15. RADIANT KING RK420 and 450. SUNSHINE (Emerson) C-1500. WESTERN AUTO/CITATION SCJ2017 and SCJ2020.
Watts LL100XL-150/210 Temperature/Pressure Relief Valve World Marketing 509 Kerosene Replacement Wick Ideal Tridon 6260450 Worm Gear Hose Clamp
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). For: ENVIROTEMP 30494, 30497 (R101, RF111). KOGY 500. SEARS 35135, SC150, 35021 and 50212. Ideal Tridon Worm Gear Hose Clamp, Series: 6260450, 7/32 - 5/8 in Nominal Opening, NO 4 Trade, 5/16 in Width, 1/4 in Hex Bolt, Grade: 200/300, Stainless Steel Band, 200/300 Stainless Steel Bolt
Ideal Tridon 6260650 Worm Gear Hose Clamp Watts 100XL Temperature and Pressure Relief Valve World Marketing 28032 Kerosene Replacement Wick
Ideal Tridon Worm Gear Hose Clamp, Series: 6260650, 5/16 - 7/8 in Nominal Opening, NO 6 Trade, 5/16 in Width, 1/4 in Hex Bolt, Grade: 200/300, Stainless Steel Band, 200/300 Stainless Steel Bolt Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). For: ALADDIN TR6000 (TR6020). ALOHA JY1130. ARTURO A.P.I. JY1130. COMFORT GLOW C22600. COMFORT TEMP (Golden Glo) GG8440. CORONA 22DK, A, B, C, XLDK and 30465. ENVIROTEMP 30465 (22DK). HEAT MATE 2200. HENRY ISLAND Magnum. KERAY (Ker-O-Ray) Husky 2. KERO-WORLD KW-23. LOUDI E196 Husky. MAGNUM 22 and 23. NORTHSTAR NS-22. SEARS 35111. SUN AIR GLOW US-23-5. TEKNIKA 2000.
World Marketing 29001 Kerosene Replacement Wick Ideal Tridon Micro-Gear 62M Worm Gear Hose Clamp Anderson Metals 754039-06 Flare plug
For: AMERICANA AC200, AR140 and HSC180. ARTIFEX S300. AVANTI KH20. CODEP 5800. COMFORT GLOW SR14. COSY 420 and 510. EGAWA HKS-50 and HK-350. ENERGY STAR EKS146C. ENVIROTEMP 30464 (18000 BTU) (AC30). FLAME-GLO 942,950. GERALD GHR180, GH16, GH18. HALLMARK HSC180. HAMAI HKS50 and HKS60. HANSON 5800. HEAT GLOW SK150 and 152C. KEROTECH Beacon 180 and 45. SAGA 300. SANYO OHC420, 42A, OHC510, OHR300, OHR1210, OHRG30A, OHR41H and OHR1410. Sears 35002, 40218, 40219, 40316.  Sunbeam(northern) 3623, 3625, 3627, 5800. SUNWISE SPC180. YUASA J37, J40 and J50. Tiny, tough, precision engineered clamps provide tenacious connections on small diameter hose and tubing. Slim-line construction eases installation in confined areas. 5/16" wide band, 1/4" hex- head screw, 5/16" wide housing. UPC individually bagged.
Camco 4703 Low Watt Density Water Heater Element Camco 2363 High Watt Density Water Heater Element Imperial BM0030 Clean Out Stove Pipe Cap
UL Listed, gasket included. UL Listed, gasket included. Closes off one crimped end of an assembled tee or flue pipe. Aids in cleaning and inspection.
World Marketing 20430 Kerosene Replacement Wick World Marketing 32000 Kerosene Replacement Wick Mintcraft HCRAN40 Hose Clamps
Replacement wick.  Fits the following kerosene heater models: KeroWorld KW-12, KC1211. DuraHeat DH1051 and Redstone WK11C8. For: AMERICAN WICK AWHC-2230 and AWOR-2000. COMFORT GLOW C20000, GC19 and R15000. CRESTLINE 38, 803 and 881. ENERGY MART EM51C. ENVIROTEMP 30496 (CV2230). FANCO CONV22. HANDY MASTER HM-19. HEAT MATE HMHC2230 and K-20. IMARFLEX 20000, 21000 and 22000. KERO-HEAT CV2000, 2200, 2230, 30496 and 250. KERO JET SCV2230. KOEHRING KC-19. LITWIN (Comfortor) C 200. ROBESON 2603-32, C20000 and KHZ-2620WG. ROBESON 2622, 2623, 2620 and 2618. Sears 40302, 40314, 35100, 40315, 40317. SENGOKU CV2230. TOUCH & GLOW CR15 and K-20. VAN WYCK (see also Robeson) 2603-32 (CONV 2000). 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Elkhart 10156950 Copper Fitting World Marketing 32225 Kerosene Replacement Wick Mintcraft HCRAN52 Hose Clamps
EPC Tube Tee, Drop Ear, 1/2 in Nominal Size, Sweat, Wrot Copper For: Dura Heat DH2404S, DH2400-2400S. Dyna Glo 95C2, 95C4, 96B, 96C, Wk95C6C, WK95C8, 8B, 8C, 8RB.  Kero World KC2400-KC2404b. ENVIROTEMP 93043 (RMC-95C). Redstone WK95C6R. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Anderson Metals 754039-04 Flare plug World Marketing 510 Kerosene Replacement Wick Camco 4803 High Watt Density Water Heater Element
UPC individually bagged. For: ENVIROTEMP 30498 (O200). KERO-SUN DC-90 and O-200. SEARS 35175 and SC200. KERO SUN O85I-L, SSTRM II, R10N, O, R101, RF111, R40A-D. TOYOSET(By Kero Sun) R101, R40A-D, R111, RF111, SSTRM II.  TOYOSTOVE/TOYOTOMI DC60, DC80, DR86, DR86F, RC11D, RSA850, RC41, RC41F, RCA87, R400, SC-150. KERO SUN O85I-L, SSTRM II, R10N, O, R101, RF111, R40A-D. TOYOSET(By Kero Sun) R101, R40A-D, R111, RF111, SSTRM II.  TOYOSTOVE/TOYOTOMI DC60, DC80, DR86, DR86F, RC11D, RSA850, RC41, RC41F, RCA87, R400, SC-150. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
CopperFlex WB00-24N Water Heater Connector World Marketing 508 Kerosene Replacement Wick Camco 23503 Dielectric Union
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. For: ENVIROTEMP 30495 (O230) and SEARS 35102 (SC-230). KERO SUN O105M, N, O120A, B, O230, 30495.  TOYOSET(By Kero Sun) O230, SC-230.  TOYOSTOVE/TOYOTOMI KSA120, WC105E, R, WC-120. Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines.
World Marketing 601KWK Cordless Siphon Pump World Marketing 28033 Kerosene Replacement Wick World Marketing 28040 Kerosene Replacement Wick
Necessary for transfer of fuel from storage tank to heater. Powered by 2-D cell batteries. Batteries not included. Convenient on/off switch.  Compatible with all types of kerosene heaters. For: AMERICAN WICK AWHC2323. COMFORT GLOW C22800 (pins). CORONA 23DK and 30441. ENVIROTEMP 30441 (23DK). KERO-WORLD KW-23B. MEDALLION AWHC-2323. ROBESON KH5-2623WG (23,000). SEARS 35112. For: AMERICAN WICK AWHR-2010. COMFORT GLOW SX-2E. CORONA SX-2E and SX-2EF. KERO-WORLD KW-10. MEDALLION AWHR-2010. ROBESON KH6-2624WG.
Fluidmaster B1H12 Water Heater Connector Watts 100XL-8-150 Temperature and Pressure Relief Valve Mintcraft HCRAN44 Hose Clamps
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRAN48 Hose Clamps Mintcraft HCRAN56 Hose Clamps Mintcraft HCRSS10-3L Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS08-3L Hose Clamps Mintcraft HCRSS06-3L Hose Clamps Mintcraft HCRSS12 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Camco 4643 High Watt Density Water Heater Element Elkhart 31220 Copper Fitting Mintcraft HCRSS24 Hose Clamps
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Fitting to copper.  Bagged. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS16 Hose Clamps Mintcraft HCRSS20 Hose Clamps Camco 08143 Replacement Single Element Water Heater Thermostat
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Anderson Metal 754048-0608 Brass Flare Fittings Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector Camco 11572 Anode Rod
UPC individually bagged. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long.
Fluidmaster B4H18 Water Heater Connector Fluidmaster B3H18 Water Heater Connector Imperial BM0074 Stove Pipe Reducer
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Imperial Stove Pipe Reducer, Series: 611, 6 X 4 in Nominal, Small End Crimped End, 24 ga Thickness, Black
Mintcraft HCRSS28 Hose Clamps Mintcraft HCRSS32 Hose Clamp World Marketing 32444 Kerosene Replacement Wick
1-piece stainless steel housing and band in precision engineered, interlocked construction. 1-piece stainless steel housing and band in precision engineered, interlocked construction. FOR TOP ONLY. For: COMFORT GLOW GRW8B, GR8X, GR9, A, B, R10000, GRF9A and B (compl). ENERGY MART EM-M221 and EM-F221 (compl). KOEHRING KRB-93A, KR-9, KRD-93, KRF-9, KRF-93, KRF-93A (compl), 9300 Deluxe (compl). NATIONAL OS222 and OS2300R (compl). PANASONIC Top only of 2 Piece Assembly, OSF224X, OS10RF and OS9R. Sears 40202, 40204, 40205, 40208, 40209, 40211, 40212, 40216. TOUCH & GLOW CR-8 and CR-9 (compl).
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 3/8 - 7/8 in Nominal Opening, NO 6 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 7/16 - 1 in Nominal Opening, NO 8 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1/2 - 1-1/16 in Nominal Opening, NO 10 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1/2 - 1-1/4 in Nominal Opening, NO 12 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 11/16 - 1-1/2 in Nominal Opening, NO 16 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 3/4 - 1-3/4 in Nominal Opening, NO 20 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water
Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Ideal Tridon Hy-Gear 67-6 Worm Gear Hose Clamp Fluidmaster B1H18 Water Heater Connector
Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1 - 2 in Nominal Opening, NO 24 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Ideal Tridon Worm Gear Hose Clamp, Series: Hy-Gear 67-6, 1-1/4 - 2-1/4 in Nominal Opening, NO 28 Trade, 1/2 in Width, 5/16 in Hex Bolt, 35 in-lb Torque, Grade: 316, Stainless Steel Band, 316 Stainless Steel Bolt, For Marine? and Salt Water Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Eastman 60237 Round Mini Ice Maker Outlet Box Imperial BM0075 Stove Pipe Reducer Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector
Pre-loaded nails provide strong rigid mount. Nails are reversible and box can be mounted to left or right stud. Trim ring accommodates up to 1" sheet rock. UPC, Lead Free. Imperial Stove Pipe Reducer, Series: 611, 6 X 5 in Nominal, Small End Crimped End, 24 ga Thickness, Black Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Mintcraft HCRSS36 Hose Clamp Fluidmaster B2H18 Water Heater Connector Elkhart 31140 Copper Fitting
1-piece stainless steel housing and band in precision engineered, interlocked construction. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. EPC Pipe Elbow, Solder, 2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
Anderson Metal 754048-0806 Brass Flare Connector Imperial BM0077 Stove Pipe Reducer Eastman 60238 Round Mini Ice Maker Outlet Box
UPC individually bagged. Imperial Stove Pipe Reducer, Series: 611, 7 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black Pre-loaded nails provide strong rigid mount. Nails are reversible and box can be mounted to left or right stud. Trim ring accommodates up to 1" sheet rock. UPC, Lead Free.
Fluidmaster B1H24 Water Heater Connector Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector Imperial BM0079 Stove Pipe Reducer
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Imperial Stove Pipe Reducer, Series: 611, 8 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black
Plumb Pak PP888-10LF Water Heater Connector Plumb Pak PP888-1LF Water Heater Connector Anderson Metals 754039-08 Flare plug
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel UPC individually bagged.
Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 08163 Adjustable Water Heater Upper Thermostat Camco 7843 Single Element Water Heater Thermostat With HLC
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
Mintcraft HCRAN64 Hose Clamp Elkhart 10156962 Copper Fitting Anderson Metal 754042-04 Brass Flare Union
1-piece stainless steel housing and band in precision engineered, interlocked construction. EPC Pipe Tee, 3/4 in Nominal Size, Copper x Copper x Female, Wrot Copper UPC individually bagged.
Anderson Metal 754048-0402 Brass Flare Connectors Imperial BM0080 Stove Pipe Reducer Mintcraft HCRSS40 Hose Clamp
UPC individually bagged. Imperial Stove Pipe Reducer, Series: 611, 8 X 7 in Nominal, Small End Crimped End, 24 ga Thickness, Black 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Camco 09423 Replacement Gasket Kit Anderson Metal 754056-0604 Brass Flare Fitting Camco 10493 Temperature and Pressure Relief Valves
Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts. UPC individually bagged. Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
Mintcraft HCRAN72 Hose Clamps Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Mintcraft HCRAN80 Hose Clamps
1-piece stainless steel housing and band in precision engineered, interlocked construction. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. 1-piece stainless steel housing and band in precision engineered, interlocked construction.
Mintcraft HCRSS48 Hose Clamp Watts 100XL-8-125 Temperature and Pressure Relief Valve Anderson Metal 754048-0808 Brass Flare Fittings
1-piece stainless steel housing and band in precision engineered, interlocked construction. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UPC individually bagged.
Eastman 60234/39165 Ice Maker Outlet Box Anderson Metal 754044-04 Brass Flare Tee Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
1/2 CPVC UPC individually bagged. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications.
Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp Ideal Tridon Hy-Gear 68-0 Interlocked Worm Gear Hose Clamp
Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band using the full strength of the material to provide maximum anti-shear protection. No spot welds to rupture under stress or corrosion. One piece housing will not come apart under high loading. 5/16" hex-head screw. Especially suited to industrial applications. Features a full-size 9/16" band and housing width that allows 12-1/2 percent more sealing area over conventional 1/2" bands. One piece housing and interlocked construction. Mechanical design locks the one piece housing directly to the band us