Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > STOVE PIPE & ACCESSORIES > CHEMICAL CLEANERS & POLISHES
Choose a sub category:
POLYETHYLENE TUBING POLYETHYLENE TUBING WATER COOLERS / DISPENSERS
WATER COOLERS / DISPENSERS WATER HEATERS - GAS ICE MAKER KITS & ACCESSORIES
ICE MAKER KITS & ACCESSORIES PEX TUBING PEX TUBING
WATER HEATERS - ELECTRIC FLAIR IT TUBING FLAIR IT TUBING
WATER HEATERS - TANKLESS GAS VINYL TUBING VINYL TUBING
WATER HEATERS -TANKLESS ELEC RUBBER TUBING RUBBER TUBING
WATER HEATER ACCESSORIES WATER HEATER REPAIR PARTS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps Elkhart Products 31096 Copper Fittings Elkhart 31194 Copper Fitting
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. EPC Pipe Elbow, Solder, 1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Fitting to copper.  Bagged.
Anderson Metal 754014-06 Brass Flare Fittings Elkhart Products 31106 Copper Fittings SCREWS HEX STOVE PIPE BLK ZNC
UPC individually bagged. EPC Pipe Elbow, Solder, 3/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Self-drilling. Hex washer head. 12 screws per pack.
Elkhart 31202 Copper Fitting Fernco PQC-101 Qwik Caps Worldwide Sourcing TC-15 Flexible Test Caps
Fitting to copper.  Bagged. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing TC-2 Flexible Test Caps Elkhart 31090 Copper Fitting CONDITIONER CREOSOTE STICK 3OZ
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. EPC Pipe Elbow, Solder, 3/8 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Use on low burning fires in wood burning systems. Effective against scale and soot. Can help reduce the threat of a chimney fire and increase heating efficiency.
Elkhart 30550 Flush Pipe Reducing Bushing Fernco PQC-102 Qwik Caps POLISH STOVE LIQUID BLACK 8OZ
Elkhart Pipe Reducing Bushing, Flush, 3/4 X 1/2 in Nominal, FTG X C End, Wrot Copper, ASTM B75 Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Non-flammable, non-toxic polish that restores and preserves the beauty of cast iron and steel. Water soluble and virtually odourless. Natural waxes and carbon pigments. Not for use on painted or enameled surfaces.
Oatey 33400 Mechanical Test Plug Worldwide Sourcing TC-3 Flexible TestCaps Fernco PQC-103 Qwik Caps
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Worldwide Sourcing TC-4 Flexible Test Caps Fernco PQC-104 Qwik Caps Elkhart 31206 Copper Fitting
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. Fitting to copper.  Bagged.
REMOVER SOOT POWDER JAR 1LB   Oatey 33401 Mechanical Test Plug BAND CHIMNEY UNIVERSAL DSP
Use in wood burning systems. May be effective against scale and soot in wood burning systems. Can help reduce the threat of a chimney fire and increase heating efficiency. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG Used to conceal the crimped end on the last length in the system.
Elkhart 30556 Flush Pipe Reducing Bushing POLISH STOVE PASTE BLACK 6OZ  Oatey 33402 Mechanical Test Plug
Elkhart Pipe Reducing Bushing, Flush, 1 X 3/4 in Nominal, FTG X C End, Wrot Copper Non-flammable, non-toxic polish that restores and preserves the beauty of cast iron and steel. Water soluble & low odour formula. Not for use on painted or enameled surfaces. Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Spray Nine 15022 Fireplace Cleaner Elkhart 32532 Copper Fitting Elkhart 32530 Copper Fitting
Fireview Premium removes wood smoke, soot, creosote and more from fireplace/woodstove glass, exterior surfaces and brick/masonry hearth surfaces. Ammonia based formula has mild pH and makes cleaning fast and easy! Use on fireplace doors, wood/pellet stoves, stone, brick, hearth rugs and more. Solder joint, for fitting end. Solder joint, for fitting end.
Kel Kem KK0044 Gas Fireplace Glass Cleaner Elkhart Products 10133582 Copper Fittings DAMPER STOVEPIPE 5IN CAST IRON
Removes stubborn white mineral deposits left by gas burning appliance. Seals & protects for improves appearance and easier cleaning. Use for: Gas fireplace glass, BBQ glass, Ceramic tiles, Marble, Porcelain & other non-porous surfaces. EPC Pipe Union, 3/4 in Nominal Size, Copper, Copper Used to regulate air by twisting handle to open and close damper. Install in black flue pipe.
Kel Kem KK0315 Glass Cleaner and Conditioner HY-C SCLK Chimney Cap Leg Kit Kel Kem KK0047 Glass and Fireplace Cleaner
Removes baked-on soot, smoke, carbon, creosote and mineral residue. Cleans, seals & protects glass. Specially formulated non-abrasive cream. For wood burning stove and fireplace glass doors, coal and gas stove glass doors, enameled and ceramic surfaces including smooth ceramic range tops. Stainless steel leg kit converts bolt-on style chimney cap to slip-in. For use where tile liner does not protrude. Extra strength cleaner for removing smoke & creosote stains from brick or glass. Ideal for fireplace glass doors, bricks and sandstone or masonry surfaces. Not for use on gas fireplaces.
Oatey 33403 Mechanical Test Plug Elkhart 31120 Copper Fitting Imperial BM0047 Stove Pipe Starter Joint
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG EPC Pipe Elbow, Solder, 1 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Used to connect two non-crimped ends of pipe together. Crimped on both ends.
Harvey's 014100 Pipe Wrap Elkhart Products 33580 Copper Fittings Imperial GV0586 Shanty Cap
High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection. EPC Pipe Union, 1/2 in Nominal Size, Copper, Copper Used to control back drafts. Prevents rain from entering the chimney.
Imperial BM0247 Trim Stove Pipe Collar Imperial BM0246 Trim Stove Pipe Collar Imperial BM0245 Trim Stove Pipe Collar
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Imperial BM0052-A Stove Pipe Damper CONDITIONER CREOSOTE PWDR 1LB DAMPER STOVEPIPE 6IN CAST IRON
Used to regulate air by twisting handle to open and close damper. Install in black flue pipe. Use on low burning fires in wood burning systems. Effective against scale and soot. Can help reduce the threat of a chimney fire and increase heating efficiency. Used to regulate air by twisting handle to open and close damper. Install in black flue pipe.
Imperial BM0095 Trim Stove Pipe Collar Imperial BM0093 Trim Stove Pipe Collar Imperial BM0094 Trim Stove Pipe Collar
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Imperial BM0096 Trim Stove Pipe Collar DAMPER STOVEPIPE 8IN CAST IRON Imperial GV0587 Shanty Cap
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Used to regulate air by twisting handle to open and close damper. Install in black flue pipe. Used to control back drafts. Prevents rain from entering the chimney.
REMOVER SOOT POWDER JAR 2LB   STOPPER FLUE ADJ 4-8IN ALMOND Imperial BM0026 Adjustable Flue Stopper
Use in wood burning systems. May be effective against scale and soot in wood burning systems. Can help reduce the threat of a chimney fire and increase heating efficiency. Used to cover existing flue hole. Adjustable anchors keep stopper securely in place. Used to cover existing flue hole. Adjustable anchors keep stopper securely in place.
Elkhart 31134 Copper Fitting Imperial GV0588 Shanty Cap Kel Kem KK0050 Glass and Masonry Cleaner
EPC Pipe Elbow, Solder, 1-1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Used to control back drafts. Prevents rain from entering the chimney. Dispenses as a foam. Particularly effective on smoke and creosote stains. Non-flammable, non-acid and non-abrasive.
Elkhart 31128 Copper Fitting Imperial BM0151 Clean Out Crimped Stove Pipe Plug Imperial BM0049 Stove Pipe Starter Joint
EPC Pipe Elbow, Solder, 1-1/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection. Used to connect two non-crimped ends of pipe together. Crimped on both ends.
Elkhart 31212 Copper Fitting Imperial GV0589 Shanty Cap Imperial GV0590 Shanty Cap
Fitting to copper.  Bagged. Used to control back drafts. Prevents rain from entering the chimney. Used to control back drafts. Prevents rain from entering the chimney.
PAINT STOVE AEROSOL 12OZ BLACK CONDITIONER CREOSOTE PWDR 2LB Elkhart 31216 Copper Fitting
Ideal for wood, coal or pellet stoves, stove pipe and barbecues. 700 Deg. C (1300 Deg. F). Use on low burning fires in wood burning systems. Effective against scale and soot. Can help reduce the threat of a chimney fire and increase heating efficiency. Fitting to copper.  Bagged.
Imperial BM0039 Stove Pipe Reducer Elkhart 10156960 Copper Fitting Imperial GV0591 Shanty Cap
Connect oval stove opening with round pipe. EPC Pipe Tee, 1/2 in Nominal Size, Copper x Copper x Female, Wrot Copper Used to control back drafts. Prevents rain from entering the chimney.
Elkhart 33584 Copper Fitting Harvey's 014130 Pipe Wrap Kel Kem KK0039 Chimney Creosote Cleaner
EPC Pipe Union, 1 in Nominal Size, Copper, Copper High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection. For wood burning systems. Removal or reduction of scale and soot can help reduce the threat of a chimney fire and increase heating efficiency.
Imperial BM0153 Clean Out Crimped Stove Pipe Plug Billy Penn 8101 Roof Cap Billy Penn 8100 Roof Cap
Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection. Billy Penn Roof Cap, Round Shape, 4 in Diameter, Steel, Galvanized, For Single Wall Pipe Billy Penn Roof Cap, Round Shape, 3 in Diameter, Steel, Galvanized, For Single Wall Pipe
Imperial BM0013 Adjustable Stove Pipe Elbow Anderson Metals 754039-06 Flare plug Imperial BM0030 Clean Out Stove Pipe Cap
Adjustable from 0 to 90 degrees. UPC individually bagged. Closes off one crimped end of an assembled tee or flue pipe. Aids in cleaning and inspection.
Billy Penn 8102 Roof Cap Elkhart 10156950 Copper Fitting Anderson Metals 754039-04 Flare plug
Billy Penn Roof Cap, Round Shape, 5 in Diameter, Steel, Galvanized, For Single Wall Pipe EPC Tube Tee, Drop Ear, 1/2 in Nominal Size, Sweat, Wrot Copper UPC individually bagged.
PAINT STOVE/GRILL BRHON PT BLK Anderson Metal 754014-04 Brass Flare Nut Billy Penn 8103 Roof Cap
Hi-Temp Black 650 Deg. C (1200 Deg. F). Unique blend of heat resistant pigments in a silicone polymer resin. Beautifies and protects any steel surface. UPC individually bagged. Billy Penn Roof Cap, Round Shape, 6 in Diameter, Steel, Galvanized, For Single Wall Pipe
Anderson Metal 754014-08 Brass Flare Fittings Elkhart 31220 Copper Fitting Anderson Metal 754014-10 Brass Flare Fittings
UPC individually bagged. Fitting to copper.  Bagged. UPC individually bagged.
Imperial BM0074 Stove Pipe Reducer Imperial BM0075 Stove Pipe Reducer Elkhart 31140 Copper Fitting
Imperial Stove Pipe Reducer, Series: 611, 6 X 4 in Nominal, Small End Crimped End, 24 ga Thickness, Black Imperial Stove Pipe Reducer, Series: 611, 6 X 5 in Nominal, Small End Crimped End, 24 ga Thickness, Black EPC Pipe Elbow, Solder, 2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
Imperial BM0077 Stove Pipe Reducer Imperial BM0079 Stove Pipe Reducer Anderson Metals 754039-08 Flare plug
Imperial Stove Pipe Reducer, Series: 611, 7 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black Imperial Stove Pipe Reducer, Series: 611, 8 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black UPC individually bagged.
Anderson Metal 754018-04 Brass Flare Fitting Elkhart 10156962 Copper Fitting Anderson Metal 754014-05 Brass Flare Nut
UPC individually bagged. EPC Pipe Tee, 3/4 in Nominal Size, Copper x Copper x Female, Wrot Copper UPC individually bagged.
Imperial BM0080 Stove Pipe Reducer Imperial BM0062 Stove Pipe Increaser Anderson Metals 754039-10 Flare plug
Imperial Stove Pipe Reducer, Series: 611, 8 X 7 in Nominal, Small End Crimped End, 24 ga Thickness, Black Ecco Flue Pipe Increaser, 6 x 8 in Nominal, Crimped End, 24 ga Thickness, Matte, Black UPC individually bagged.
Imperial BM0061 Stove Pipe Increaser Imperial BM0063 Stove Pipe Increaser Elkhart 33585 Copper Fitting
Ecco Flue Pipe Increaser, 7 x 6 in Nominal, Crimped End, 24 ga Thickness, Matte, Black, For Solid Fuel Appliances Such As Wood Stoves Ecco Flue Pipe Increaser, 8 x 7 in Nominal, Crimped End, 24 ga Thickness, Matte, Black, For Solid Fuel Appliances Such As Wood Stoves EPC Pipe Union, 1-1/4 in Nominal Size, Copper, Copper
FLUE PIPE INCREASER 5X6IN BLK Billy Penn 8104 Roof Cap Anderson Metal 754020-0806 Brass Flare Nut
Imperial Flue Pipe Increaser, 1-Piece, 5 x 6 in Nominal, 24 ga Thickness, Black Billy Penn Roof Cap, Round Shape, 7 in Diameter, Steel, Galvanized, For Single Wall Pipe UPC individually bagged.
Elkhart 33586 Copper Fitting Billy Penn 8105 Roof Cap Imperial BM0040 Oval to Round Stove Pipe Boot
EPC Pipe Union, 1-1/2 in Nominal Size, Copper, Copper Billy Penn Roof Cap, Round Shape, 8 in Diameter, Steel, Galvanized, For Single Wall Pipe Connect oval stove opening with round pipe.
Anderson Metal 754018-10 Brass Flare Nut Imperial BM0082 Assembled Tee Anderson Metal 754020-0604 Brass Flare Reducing Nut
UPC individually bagged. Used to direct exhaust upward. UPC individually bagged.
Imperial BM0083 Pipe Tee Anderson Metal 754018-06 Brass Flare Fitting Imperial BM0084 Pipe Tee
Used to direct exhaust upward. UPC individually bagged. Used to direct exhaust upward.
Imperial BM0085 Pipe Tee ADAPTOR STOVE 6 IN            Billy Penn 2490 Roof Jack
Used to direct exhaust upward. May be required to adapt some stove flue outlets to double wall stove pipe. Billy Penn Roof Jack, 4 in, Steel, Galvanized, For Pitched Roof
Billy Penn 2491 Roof Jack ADAPTOR CHIMNEY 6IN           HY-C SC Chimney Cap
Billy Penn Roof Jack, 6 in, Steel, Galvanized, For Pitched Roof Used to complete the connection between DSP double wall stove pipe and any insulated chimney system. Black powder coated galvanized steel. Protects internal fireplace and keeps out rain, birds, animals and debris. Completely assembled easy to install.  24 gauge single piece steel hood. Steel mesh and base for extra strength. Slotted hex-head bolts. One screw at each corner tightens against the flue tile.
Anderson Metal 754018-08 Brass Flare Fittings Elkhart 33587 Copper Fitting HY-C SC Chimney Cap
UPC individually bagged. EPC Pipe Union, 2 in Nominal Size, Copper, Copper Black powder coated galvanized steel. Protects internal fireplace and keeps out rain, birds, animals and debris. Completely assembled easy to install.  24 gauge single piece steel hood. Steel mesh and base for extra strength. Slotted hex-head bolts. One screw at each corner tightens against the flue tile.
Selkirk 266215 Fixed Stove Pipe Elbow HY-C SC Chimney Cap HY-C SC Adjustable Small Chimney Cap
Used to offset double wall stove pipe toward insulated chimney. Non-positional connection system allows 360 degree rotation. Black powder coated galvanized steel. Protects internal fireplace and keeps out rain, birds, animals and debris. Completely assembled easy to install.  24 gauge single piece steel hood. Steel mesh and base for extra strength. Slotted hex-head bolts. One screw at each corner tightens against the flue tile. Protects internal fireplace and chimney from deterioration. Keeps out rain, birds, animals, and debris. Black powder coated galvanized steel. 24 gauge galvanized hood. 16 gauge galvanized wire mesh. 14 gauge galvanized braces. Steel mounting brackets. Fits Rectangular: 8" x 8", 9" x 9", 8" x 12", 9" x 13", 12" x 12", and 13" x 13" outside tile sizes. Fits Round: 8", 10", and 12" outside tile diameters.
Anderson Metal 754014-12 Brass Flare Fitting HY-C SC Chimney Cap HY-C SC Chimney Cap
UPC individually bagged. 24 Gauge single pieces stainless steel hood with roll formed edges. 16 gauge stainless steel base for extra strength. 18 gauge 3/4" expanded stainless steel mesh. Stainless steel slotted hex-head bolts. Expanded metal mesh turned inward at base to allow cover to rest firmly on tile closing any openings around tile. Outside mounting provides greater free air-space for better draft. Optional heavy-duty stainless steel leg kit (For use when flue tile does not extend above crown.) Black powder coated galvanized steel. Protects internal fireplace and keeps out rain, birds, animals and debris. Completely assembled easy to install.  24 gauge single piece steel hood. Steel mesh and base for extra strength. Slotted hex-head bolts. One screw at each corner tightens against the flue tile.
HY-C SC Chimney Cap TREATMENT CREOSOTE 2LB        HY-C SC Adjustable Large Chimney Cap
24 Gauge single pieces stainless steel hood with roll formed edges. 16 gauge stainless steel base for extra strength. 18 gauge 3/4" expanded stainless steel mesh. Stainless steel slotted hex-head bolts. Expanded metal mesh turned inward at base to allow cover to rest firmly on tile closing any openings around tile. Outside mounting provides greater free air-space for better draft. Optional heavy-duty stainless steel leg kit (For use when flue tile does not extend above crown.) For airtight wood burning systems. Helps reduce creosote build up in your chimney. Protects internal fireplace and chimney from deterioration. Keeps out rain, birds, animals, and debris. Black powder coated galvanized steel. 24 gauge galvanized hood. 16 gauge galvanized wire mesh. 14 gauge galvanized braces. Steel mounting brackets. Fits Rectangular: 13" x 13", 13" x 18", 9" x 18" and 12" x 16" outside tile sizes. Fits Oval: 8" x 17", 10" x 17", and 13" x 17" outside tile sizes.
Imperial BM0014 Adjustable Stove Pipe Elbow CAP AND TEE 6 INCH            Imperial BM0015 Adjustable Stove Pipe Elbow
Adjustable from 0 to 90 degrees. Used in conjunction with a vertical insulated chimney to provide easy access for inspection and cleaning. Adjustable from 0 to 90 degrees.
Imperial BM0023 1-Piece Corrugated Stove Pipe Elbow Selkirk 266230 Fixed Stove Pipe Elbow HY-C SC Chimney Cap
Used to connect two lengths of flue pipe together. Used to offset double wall stove pipe toward insulated chimney in a through-the-wall installation. Non-positional connection system allows 360 degree rotation. 24 Gauge single pieces stainless steel hood with roll formed edges. 16 gauge stainless steel base for extra strength. 18 gauge 3/4" expanded stainless steel mesh. Stainless steel slotted hex-head bolts. Expanded metal mesh turned inward at base to allow cover to rest firmly on tile closing any openings around tile. Outside mounting provides greater free air-space for better draft. Optional heavy-duty stainless steel leg kit (For use when flue tile does not extend above crown.)
Imperial BM0016 Adjustable Stove Pipe Elbow Imperial BM0025 1-Piece Corrugated Stove Pipe Elbow Vogelzang BD-06 Barometric Damper
Adjustable from 0 to 90 degrees. Used to connect two lengths of flue pipe together. Prevents over-drafting in wood stoves, coal stoves, circulators and add-on furnaces. Provides a safer, more efficient burn pattern. Automatic combustion control with spin dial. Versatile mounting applications. For use with 6" single wall flue pipe.
Fulton 1F-72 Flue Stopper Fulton 3F-72 Flue Stopper REMOVER SOOT STICK 3OZ
Embossed and decorated of first class material, enamel coated front and back. Clamps of spring wire constructed so they will never lose their strength. Springs will adjust themselves to fit either smooth or irregular flue hole. Colored finish. Embossed and decorated of first class material, enamel coated front and back. Clamps of spring wire constructed so they will never lose their strength. Springs will adjust themselves to fit either smooth or irregular flue hole. Colored finish. Use in wood burning systems. May be effective against scale and soot in wood burning systems. Can help reduce the threat of a chimney fire and increase heating efficiency.
Vogelzang HR-6 Heat Reclaimer Vogelzang HR-8 Heat Reclaimer WTR HEAT TNKLS ELEC 3.5KW 120V
HR-6 Heat Reclaimer, 6 in
Our Price: $108.00
Attaches to stove pipe and reclaims heat normally lost up the flue. Whisper quiet, safety tested UL fan motor gently blows warm air into the room. Thermostatically controlled, turns on at 160 Deg. Fahrenheit, off at 130 Deg. Fahrenheit. Decorative nickel trim. Attaches to stove pipe and reclaims heat normally lost up the flue. Whisper quiet, safety tested UL fan motor gently blows warm air into the room. Thermostatically controlled, turns on at 160 Deg. Fahrenheit, off at 130 Deg. Fahrenheit. Decorative nickel trim. On demand, continuous hot water. Compact and stylish. 99.8% energy efficient. Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation. Digital temperature display.
WATER HEAT TNKLS ELEC 6KW 220V WTER HEAT TNKLS ELEC 11KW 240V WTER HEAT TNKLS ELEC 18KW 240V
On demand, continuous hot water. Compact and stylish. 99.8% energy efficient. Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation. Digital temperature display. Compact and stylish with digital temperature control in increments of 1?F ranging from 80?F to 140?F. 99.9% energy efficient. Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation. Digital temperature display. Compact and stylish with digital temperature control in increments of 1?F ranging from 80?F to 140?F. 99.9% energy efficient. Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation. Digital temperature display.
WTER HEAT TNKLS ELEC 27KW 240V Rheem / Richmond RMTGH-95DVLN Water Heater Rheem / Richmond RMTGH-95DVLP Water Heater
On demand, continuous hot water. Compact and stylish with digital temperature control in increments of 1?F ranging from 80?F to 140?F. 99.8% energy efficient. Robust copper immersion heating elements with brass top increases durability and are threaded for easy replacement. Simple installation. Digital temperature display. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D.
Rheem / Richmond RMTGH-95XLN Water Heater Rheem / Richmond RMTGH-95XLP Water Heater
For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D.
   
 
1