Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > FIREPLACE > MISC FIREPLACE ACCESSORIES
Sort By:
1
Elkhart 32414 2-Hole Tube Strap EPC 30626 Tube Cap B and K Industries P01-050HC Baby J-Hook
Contractor Pack - Bagged EPC Tube Cap, 1/2 in Nominal, Sweat/Solder End, Wrot Copper, 5/8 in OD ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
B and K Industries P01-075HC Baby J-Hook B&K G13-100HC 2-Hole Pipe Strap B and K P28-050HC Pipe Clamps
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation.
EPC 30622 Tube Cap Thermwell P10XB/6 Frost King EPC 30630 Tube Cap
EPC Tube Cap, 1/4 in Nominal, Sweat/Solder End, Wrot Copper, 3/8 in OD Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness. EPC Tube Cap, 3/4 in Nominal, Sweat/Solder End, Wrot Copper, 7/8 in OD
B and K P28-075HC Pipe Clamps EPC 30624 Tube Cap B and K Industries P01-100HC Baby J-Hook
Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. EPC Tube Cap, 3/8 in Nominal, Sweat/Solder End, Wrot Copper, 1/2 in OD ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
B&K G13-038HC 2-Hole Pipe Strap B&K C13-100HC 2-Hole Pipe Strap B&K G13-125HC 2-Hole Pipe Strap
Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
B and K Industries G65-050HC Clevis Hanger B&K C13-125HC 2-Hole Pipe Strap Thermwell P11XB/6 Frost King
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
B&K P20-100HC Perforated Hanger Tape B&K G13-050HC 2-Hole Pipe Strap B and K Industries P25-050HC Pipe Clamp
Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction.
B and K P25-075HC Pipe Clamps Elkhart 32428 2-Hole Tube Strap B&K C15-125HC Nail
Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Contractor Pack - Bagged B&K Nail, 1-1/4 in, Copper, Plated Steel
B and K Industries P24-050HC Pipe Clamps B&K C13-150HC 2-Hole Pipe Strap Elkhart 32424 2-Hole Tube Strap
Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Contractor Pack - Bagged
B and K P24-075HC Pipe Clamps B&K G20-124HC Pipe Strap B&K C13-050HC 2-Hole Pipe Strap
Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use.
Elkhart 32426 2-Hole Tube Strap B&K G80-038HC Plate Connector 3/8 in B & K Industries P27-075HC Pipe Insulator
Contractor Pack - Bagged Galvanized malleable iron top plate connector used to connect split ring hangers with a 3/8" all thread rod. Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration.
B&K G20-128HC Pipe Strap B&K C13-075HC 2-Hole Pipe Strap Elkhart Products 31096 Copper Fittings
Galvanized steel 28 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Lightweight steel. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. EPC Pipe Elbow, Solder, 1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
B & K Industries P27-050HC Pipe Insulator B and K G72-050HC Split Ring Hangers B&K G60-038HC Beam Clamp
Durable polypropylene pipe insulator.  V-shaped notch to easily snap onto pipe.  Flanged with holes for secure installation.  Eliminates noise and vibration. B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Galvanized Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist.
B and K G72-075HC Split Ring Hangers B and K P24-100HC Pipe Clamps B&K G13-150HC 2-Hole Pipe Strap
B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Galvanized Durable polypropylene half clamp provides an easy and efficient way to secure pipes.  Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
B and K Industries P28-100HC Pipe Clamp Elkhart 31194 Copper Fitting B&K G13-075HC 2-Hole Pipe Strap
Durable polypropylene standard clamp.  Split, ribbed design to allow for expansion and contraction after installation.  Flanged with holes for secure installation. Fitting to copper.  Bagged. Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit.
B and K Industries C23-050HC J-Hook B&K C13-200HC 2-Hole Pipe Strap Tundra Plus PR38138UW Pipe Insulation
Provides quick nail support. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use. Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
Elkhart 83003 2-Hole Tube Strap B and K Industries P25-100HC Pipe Clamp B&K C22-075HC J-Nail Pipe Strap
Contractor Pack - Bagged Durable polypropylene full clamp provides an easy and efficient way to secure pipes.  Clamp grips, insulates, and isolates the pipe from the mounting surface.  Preloaded barbed nails allow pipe to secured in any direction. Provides quick nail support.
B and K G72-100HC Split Ring Hangers B&K G13-200HC 2-Hole Pipe Strap B&K G60-050HC Beam Clamp
B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Galvanized Galvanized steel two-hole strap to secure pipe.  Two holes for use with nails or screws to ensure stable fit. Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist.
B and K Industries G65-075HC Clevis Hanger B&K P20-250HC Perforated Hanger Tape M-D Building Products 50162 Tube Pipe Insulation
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Pre-cut, self sealing slits for easy application
Worldwide Sourcing TWC0534-3L Hanger Iron B and K V30-150HC Pipe Hangers B and K Industries G65-100HC Clevis Hanger
Galvanized finish. 3/4" x 10' Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
B and K Industries G10-050HC Pipe Hook B&K G18-050HC 1-Hole Pipe Strap B and K Industries G65-150HC Clevis Hanger
Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger.
B and K Industries G10-075HC Pipe Hook EPC 30632 Tube Cap Elkhart Products 31106 Copper Fittings
Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated. EPC Tube Cap, 1 in Nominal, Sweat/Solder End, Wrot Copper, 1-1/8 in OD EPC Pipe Elbow, Solder, 3/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
B and K V30-200HC Pipe Hangers B&K G18-075HC 1-Hole Pipe Strap B and K Industries G10-100HC Pipe Hook
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Galvanized steel one-hole strap to secure pipe.  One hole for use with nails or screws to ensure stable fit in tight areas. Galvanized steel water pipe supply hook.  Nail point ends for easy drive-in use. Vinyl coated.
HOOK J 10PK 1/2IN             B and K Industries G65-200HC Clevis Hanger B and K Industries C10-050HC Pipe Hook
HOOK J 10PK 1/2IN
Our Price: $2.64
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use.
Elkhart 83005 2-Hole Tube Strap B and K Industries V30-300HC Pipe Hanger B&K C13-038HC 2-Hole Pipe Strap
Contractor Pack - Bagged Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Copper plated two-hole strap to secure pipe.  Corrosion resistant, for indoor & outdoor use.
B and K C10-075HC Pipe Hooks HOOK J 10PK 3/4IN             Elkhart 31202 Copper Fitting
HOOK J 10PK 3/4IN
Our Price: $2.97
Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Fitting to copper.  Bagged.
B and K V30-400HC Pipe Hangers B and K Industries C10-100HC Pipe Hook Elkhart 83006 2-Hole Tube Strap
Vinyl coated galvanized steel DWV pipe hanger.  Locking screw keeps pipe secure.  Keyhole design provides faster installation.  Perforated holes allow for several hanging lengths. Copper plated water pipe supply hook.  Corrosion resistant, for indoor & outdoor use.  Nail point ends for easy drive-in use. Contractor Pack - Bagged
B and K G72-125HC Split Ring Hangers Elkhart 31090 Copper Fitting B and K G72-150HC Split Ring Hangers
B & K Ring Hanger, Split, 1-1/4 in Opening, Malleable Iron, Galvanized EPC Pipe Elbow, Solder, 3/8 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications B & K Ring Hanger, Split, 1-1/2 in Opening, Malleable Iron, Galvanized
Plumb Pak PP855-8 Pipe Strap Elkhart 30304 Copper Fitting Genova 500 Tubing Strap
3/4'" x 10'. For hanging pipes, fastening faucets and valves, repair jobs and more. EPC Pipe Reducing Adapter, 3/8 x 1/2 in Nominal Size, Copper x MNPT, Wrot Copper Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included.
Genova 500 Tubing Strap B and K G72-200HC Split Ring Hangers American Valve P230 1/2 PVC Fitting
Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included. B & K Ring Hanger, Split, 2 in Opening, Malleable Iron, Galvanized AMERICAN Valve Pipe Tee, 1/2 in Nominal Size, Compression x Compression x NPT, 0.83 in Inside Dia, 1.85 in Outside Dia, 5 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F
EPC 30634 Tube Cap EPC 30626CP Tube Cap KBI Flo Control ProGuard Tube To Pipe Adapter
EPC Tube Cap, 1-1/4 in Nominal, Sweat/Solder End, Wrot Copper, 1-3/8 in OD EPC Tube Cap, 1/2 in Nominal, Sweat/Solder End, Wrot Copper, 5/8 in OD KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
M-D 50140 Pipe Insulation B&K P20-500HC Perforated Hanger Tape Pellet Pipe 243810 Storm Collar
Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). Plastic strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated.  Easy to cut and lightweight. Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly.
American Valve P230 3/4 PVC Fitting M-D 50142 Pipe Insulation EPC 30636 Tube Cap
AMERICAN Valve Pipe Tee, 3/4 in Nominal Size, Compression x Compression x NPT, 1.04 in Inside Dia, 2.05 in Outside Dia, 5.2 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). EPC Tube Cap, 1-1/2 in Nominal, Sweat/Solder End, Wrot Copper, 1-5/8 in OD
KBI Flo Control ProGuard Tube To Pipe Adapter Elkhart 30318 Copper Fitting Genova 52105 Tube Hanger
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x MNPT, Wrot Copper Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
Genova 52107 Tube Hanger Elkhart 31206 Copper Fitting Elkhart 30338 Copper Fitting
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling. Fitting to copper.  Bagged. EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x MNPT, Wrot Copper
NDS CPT-0500-S PVC Compression Run Tees KBI Flo Control ProGuard Tube To Pipe Adapter M-D Building 50144 Pipe Insulation
Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 5-1/2 in Length X 5-1/2 in Width X 3 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4").
NDS CPT-0500-T PVC Compression Run Tees B&K C20-124HC Pipe Strap BAND CHIMNEY UNIVERSAL DSP
NDS Pipe Tee, 1/2 in Nominal Size, Compression x Threaded, 0.86 in Inside Dia, 1.81 in Outside Dia, 5 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Copper plated 24 gauge strapping with perforated holes to be used for securing any size pipe.  Corrosion resistant, for indoor & outdoor use. Allows custom straps to be fabricated. Used to conceal the crimped end on the last length in the system.
Elkhart Products 30316 Copper Fittings Genova 79716 Pipe Hanger Elkhart 32532 Copper Fitting
EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x MNPT, Wrot Copper Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included. Solder joint, for fitting end.
Elkhart 32530 Copper Fitting Elkhart Products 10133582 Copper Fittings Genova 79721 Pipe Hanger
Solder joint, for fitting end. EPC Pipe Union, 3/4 in Nominal Size, Copper, Copper Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
Genova 79731 Pipe Hanger NDS CPT-0750-S PVC Compression Run Tees NDS CPT-0750-T PVC Compression Run Tees
Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included. Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards. NDS Pipe Tee, 3/4 in Nominal Size, Compression x Threaded, 1.09 in Inside Dia, 2.01 in Outside Dia, 5-3/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Camco 09943 Water Heater Element Wrenches Elkhart 31120 Copper Fitting Worldwide Sourcing PMB-424 Pipe Straps
Zinc plated element wrenches fit all screw-in elements and 1-1/2" nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can?t. EPC Pipe Elbow, Solder, 1 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications 3/4" x 10'.
B&K G20-524HC Pipe Strap American Valve P230 1 PVC Fitting Genova 79741 Pipe Hanger
Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. AMERICAN Valve Pipe Tee, 1 in Nominal Size, Compression x Compression x NPT, 1.31 in Inside Dia, 2.4 in Outside Dia, 5.65 in Length, SCH 40, 150 psi at 73 deg F Working, PVC, 140 deg F Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
Imperial BM0047 Stove Pipe Starter Joint Elkhart Products 33580 Copper Fittings NDS CPT-1000-S PVC Compression Run Tees
Used to connect two non-crimped ends of pipe together. Crimped on both ends. EPC Pipe Union, 1/2 in Nominal Size, Copper, Copper Working temperature max., 140 degrees F. at 66 PSI. Working pressure 150 PSI at 70 degrees F. Complies with all applicable ASTM and ANSI standards.
NDS CPT-1000-T PVC Compression Run Tees Imperial BM0042 Large End Stove Pipe Slip Joint with 2 in Collar Imperial BM0095 Trim Stove Pipe Collar
NDS Pipe Tee, 1 in Nominal Size, Compression x Threaded, 1.31 in Inside Dia, 2.27 in Outside Dia, 5-5/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Allows custom connection between two pipe joints without cutting pipe. Tapered to slide into pipe. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Imperial BM0093 Trim Stove Pipe Collar Imperial BM0094 Trim Stove Pipe Collar Imperial BM0096 Trim Stove Pipe Collar
Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech. Provides a finished appearance at wall or chimney opening. Install on wall where flue pipe connects to masonry chimney breech.
Camco 11260 Drain Pan With 1 in PVC Fitting KBI Flo Control ProGuard Tube To Pipe Adapter Camco 9973 Quick Change Element Tool
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1-1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 3 in Length X 1-3/4 in Width X 5-1/2 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water.
EPC 30638 Tube Cap Imperial BM0026 Adjustable Flue Stopper Elkhart 31134 Copper Fitting
EPC Tube Cap, 2 in Nominal, Sweat/Solder End, Wrot Copper, 2-1/8 in OD Used to cover existing flue hole. Adjustable anchors keep stopper securely in place. EPC Pipe Elbow, Solder, 1-1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
Elkhart 30336 Copper Fitting Elkhart 31128 Copper Fitting Imperial BM0044 Large End Stove Pipe Slip Joint with 2 in Collar
EPC Pipe Adapter, 3/4 x 1 in Nominal Size, Copper x MNPT, Wrot Copper EPC Pipe Elbow, Solder, 1-1/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Allows custom connection between two pipe joints without cutting pipe. Tapered to slide into pipe.
Camco 11460 Drain Pan With 1 in PVC Fitting Imperial BM0151 Clean Out Crimped Stove Pipe Plug Camco 10023 Water Heater Continuity Tester With Battery
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection. Test your elements and thermostats while still in the water heater. 1 piece.
Imperial BM0049 Stove Pipe Starter Joint Elkhart 31212 Copper Fitting Elkhart 30348 Copper Fitting
Used to connect two non-crimped ends of pipe together. Crimped on both ends. Fitting to copper.  Bagged. EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x MNPT, Wrot Copper
KBI Flo Control ProGuard Tube To Pipe Adapter Camco 11360 Drain Pan With 1 in PVC Fitting Elkhart 31216 Copper Fitting
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-3/4 in Length X 2 in Width X 2-1/4 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Fitting to copper.  Bagged.
Imperial BM0039 Stove Pipe Reducer Elkhart 10156960 Copper Fitting Camco 11400 Drain Pan With 1 in PVC Fitting
Connect oval stove opening with round pipe. EPC Pipe Tee, 1/2 in Nominal Size, Copper x Copper x Female, Wrot Copper For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Elkhart 33584 Copper Fitting Anderson Metal 754040-08 Brass Flare Cap Imperial BM0153 Clean Out Crimped Stove Pipe Plug
EPC Pipe Union, 1 in Nominal Size, Copper, Copper UPC individually bagged. Used to close off non-crimped end of flue pipe or tee. Aids in cleaning and inspection.
B and K Industries P02-300HC J-Hook B&K G20-1024HC Pipe Strap Imperial BM0013 Adjustable Stove Pipe Elbow
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe.  Allows custom straps to be fabricated. Adjustable from 0 to 90 degrees.
NDS CPT-1250-T PVC Compression Run Tees Imperial BM0030 Clean Out Stove Pipe Cap NDS CPT-1500-T PVC Compression Run Tees
NDS Pipe Tee, 1-1/4 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 2.67 in Outside Dia, 6-1/8 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Closes off one crimped end of an assembled tee or flue pipe. Aids in cleaning and inspection. NDS Pipe Tee, 1-1/2 in Nominal Size, Compression x Threaded, 1.7 in Inside Dia, 3.01 in Outside Dia, 6-3/4 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified
Anderson Metal 754040-04 Brass Flare Cap Elkhart 10156950 Copper Fitting Camco 9953 Professional Element Socket
UPC individually bagged. EPC Tube Tee, Drop Ear, 1/2 in Nominal Size, Sweat, Wrot Copper Fits standard 1/2" socket drive to replace screw-in water heater elements.
NDS CPT-2000-T PVC Compression Run Tees Elkhart 31220 Copper Fitting Camco 20800 Drain Pan With 1 in PVC Fitting
NDS Pipe Tee, 2 in Nominal Size, Compression x Threaded, 2.41 in Inside Dia, 3.72 in Outside Dia, 7-1/2 in Length, SCH 40, 150 psi at 72 deg F Working, PVC, White, NSF Listed, ANSI Specified Fitting to copper.  Bagged. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
GLOVES FIREPLACE COWHIDE LTHR Imperial BM0074 Stove Pipe Reducer Selkirk 243502 Trim Plate
Made of genuine cowhide leather. Cuff extends above the wrist for superior protection, for safety and comfort. Universal size. Imperial Stove Pipe Reducer, Series: 611, 6 X 4 in Nominal, Small End Crimped End, 24 ga Thickness, Black Used to finish off the bottom (ceiling) side of a floor/ceiling penetration or on the outside wall as a exterior shield. Over-all size is 12-1/2" x 12-1/2". UL Listed.
Imperial BM0075 Stove Pipe Reducer Selkirk 243430 Tee Support Elkhart 31140 Copper Fitting
Imperial Stove Pipe Reducer, Series: 611, 6 X 5 in Nominal, Small End Crimped End, 24 ga Thickness, Black Type L pellet vent. Can be used to support either a 3" or 4" diameter tee installation. UL Listed. EPC Pipe Elbow, Solder, 2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
Camco 20840 Drain Pan With 1 in PVC Fitting Imperial BM0077 Stove Pipe Reducer Selkirk 243520 Wall Bracket
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Imperial Stove Pipe Reducer, Series: 611, 7 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3" from wall. UL Listed.
Imperial BM0079 Stove Pipe Reducer Elkhart 10156962 Copper Fitting Homebasix CPA03110MM3L Adult Hearth Fireplace Gloves
Imperial Stove Pipe Reducer, Series: 611, 8 X 6 in Nominal, Small End Crimped End, 24 ga Thickness, Black EPC Pipe Tee, 3/4 in Nominal Size, Copper x Copper x Female, Wrot Copper 16" Pigskin gloves.
Imperial BM0080 Stove Pipe Reducer Anderson Metal 754040-10 Brass Flare Cap B and K P02-400HC J-Hooks
Imperial Stove Pipe Reducer, Series: 611, 8 X 7 in Nominal, Small End Crimped End, 24 ga Thickness, Black UPC individually bagged. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
Camco 20830 Drain Pan With 1 in PVC Fitting Rheem / Richmond RP20063 Water Heater Gasket Kit Imperial BM0062 Stove Pipe Increaser
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. Ecco Flue Pipe Increaser, 6 x 8 in Nominal, Crimped End, 24 ga Thickness, Matte, Black
Imperial BM0061 Stove Pipe Increaser Imperial BM0063 Stove Pipe Increaser Elkhart 33585 Copper Fitting
Ecco Flue Pipe Increaser, 7 x 6 in Nominal, Crimped End, 24 ga Thickness, Matte, Black, For Solid Fuel Appliances Such As Wood Stoves Ecco Flue Pipe Increaser, 8 x 7 in Nominal, Crimped End, 24 ga Thickness, Matte, Black, For Solid Fuel Appliances Such As Wood Stoves EPC Pipe Union, 1-1/4 in Nominal Size, Copper, Copper
Camco 20810 Drain Pan With 1 in PVC Fitting FLUE PIPE INCREASER 5X6IN BLK Imperial BM0024 Crimped Elbow
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Imperial Flue Pipe Increaser, 1-Piece, 5 x 6 in Nominal, 24 ga Thickness, Black Used to connect two lengths of flue pipe together.
Rheem / Richmond RP20064 Thermocoupler-Gasket Kits Anderson Metal 754040-06 Brass Flare Fitting Thermwell SP57/11C Insulation Blanket
Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: 24" thermocouple, burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. UPC individually bagged. 3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters.
Elkhart 33586 Copper Fitting B and K Industries P01-125HC Baby J-Hook B and K P02-150HC J-Hooks
EPC Pipe Union, 1-1/2 in Nominal Size, Copper, Copper ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit.
M-D 04663 Water Heater Insulation Blanket Homebasix A801-C3L Wood Fireplace Bellow Selkirk DoubleWall Fixed Length Stove Pipe 6 in ID
White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged. Oak finish with brass trim. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
B and K Industries P02-200HC J-Hook Quick R B5-69 Water Heater Insulation Jacket Imperial BM0040 Oval to Round Stove Pipe Boot
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs.  Includes nails for secure fit. Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gallon tank. 2" x 48" x 75" blanket per bag. Connect oval stove opening with round pipe.
Imperial BM0082 Assembled Tee B and K Industries C83-075HC Pipe Hanger Pellet Pipe 243800 Vertical Termination Stove Pipe Cap 8 in OD
Used to direct exhaust upward. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL Listed.
B and K Industries G65-125HC Clevis Hanger Selkirk 243243 Adjustable Pipe Connector Camco 20860 Drain Pan With 1 in PVC Fitting
Galvanized steel for IPS pipe.  For use with all thread rod up to 3/8".  Works as a suspension style hanger. Adjustable pipe connector will connect to 3" appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3" VP pipe, elbow or tee. UL Listed. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Selkirk A 243825 Adjustable Pellet Vent Roof Flashing B and K Industries C83-100HC Pipe Hanger Imperial BM0083 Pipe Tee
Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. Used to direct exhaust upward.
FMI AK4 Combustion Outside Air Kit Imperial BM0084 Pipe Tee Imperial BM0085 Pipe Tee
Complete kit with collar, hood, & 3' flex pipe. Fits all models. Used to direct exhaust upward. Used to direct exhaust upward.
ADAPTOR STOVE 6 IN            Behrens 617S Coal Hod B and K Industries C72-038HC Ring Hanger
May be required to adapt some stove flue outlets to double wall stove pipe. Made of highest quality steel. Heavy-duty wire handle. Ideal for storing firewood or removing hot ashes. B & K Ring Hanger, Split, 3/8 in Opening, Malleable Iron, Copper Plated
DRAIN PAN W/H 32IN ID ALUMINUM B and K Industries C83-050HC Pipe Hanger Behrens 617P Coal Hod
Aluminum pan for gas or electric water heaters, 32" internal diameter, will not rust or crack, PVC fitting included. Copper plated bell hanger for use hanging from a wall, joist, or stud.  Corrosion resistant.  Copper plated screw to secure hanger to substrate and 2 additional copper plated screws to secure pipe to hanger. Made of highest quality steel. Heavy-duty wire handle. Ideal for storing firewood or removing hot ashes.
Behrens B906P Ash Pail Eastman 60022/DET-5 Thermal Expansion Tank ADAPTOR CHIMNEY 6IN
Multiple dry storage applications: Fireplace ashes, yard waste, trash, holds up to 25 pounds of pet food or bird seed. Lid moluded, locking bail keeps lid secure and deters rodents and other pests. Offset bottom keeps can off ground. Weather and chemical resistant. Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar). Used to complete the connection between DSP double wall stove pipe and any insulated chimney system.
B and K C82-050HC Pipe Hangers B and K C72-050HC Ring Hangers Pellet Pipe 243803 Exit Stove Pipe Cap 5-3/4 in L
Mueller Pipe Hanger, Milford, 1/2 in Opening, Steel, Copper Plated, 6 in Length, Includes: Nails B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Copper Plated Exit Cone Cap is