Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > FIREPLACE > FIRELOGS/FIRE STARTERS
Choose a sub category:
WATER HEATERS - GAS WATER HEATERS - ELECTRIC WATER HEATERS - TANKLESS GAS
WATER HEATERS -TANKLESS ELEC WATER HEATER ACCESSORIES WATER HEATER REPAIR PARTS
Sort By:
1
Oatey 39100/33460 Test Caps Oatey 39101/33461 Test Caps Oatey 39102/33462 Test Caps
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps Elkhart Products 31272 Copper Fittings Elkhart Products 32700 Copper Fittings
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS. EPC Pipe Elbow, Close Rough, Solder, 1/2 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Tee, 1/2 in Nominal Size, Copper, Wrot Copper
Elkhart Products 31288 Copper Fittings Elkhart Products 31400 Copper Fittings Elkhart 31266 Copper Fitting
EPC Pipe Elbow, Close Rough, Solder, 3/4 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Street Elbow, Close Rough, Solder, 1/2 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Elbow, Close Rough, Solder, 3/8 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications
Elkhart 31262 Copper Fitting Elkhart 32048 Copper Fitting Elkhart 32044 Copper Fitting
EPC Pipe Elbow, Close Rough, Solder, 1/4 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Reducer, 1/2 x 3/8 in Nominal Size, FTG x Copper, Copper EPC Pipe Reducer, 3/8 x 1/4 in Nominal Size, FTG x Copper, Copper
Elkhart 32050 Copper Fitting Elkhart 31396 Copper Fitting Elkhart 32064 Copper Fitting
EPC Pipe Reducer, 1/2 x 1/4 in Nominal Size, FTG x Copper, Copper EPC Pipe Street Elbow, Close Rough, Solder, 3/8 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Reducer, 3/4 x 1/2 in Nominal Size, FTG x Copper, Copper
Elkhart Products 31408 Copper Fittings Elkhart Products 32768 Copper Fittings Fernco PQC-101 Qwik Caps
EPC Pipe Street Elbow, Close Rough, Solder, 3/4 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Tee, 3/4 in Nominal Size, Copper, Wrot Copper Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Worldwide Sourcing TC-15 Flexible Test Caps Elkhart Products 31296 Copper Fittings Worldwide Sourcing TC-2 Flexible Test Caps
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. EPC Pipe Elbow, Close Rough, Solder, 1 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco PQC-102 Qwik Caps Elkhart 32072 Copper Fitting Elkhart Products 32774 Copper Fittings
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. EPC Pipe Reducer, 1 x 3/4 in Nominal Size, FTG x Copper, Copper EPC Pipe Reducing Tee, 3/4 x 3/4 x 1/2 in Nominal Size, Copper, Wrot Copper
Elkhart 32794 Copper Fitting Elkhart 32668 Copper Fitting Oatey 33400 Mechanical Test Plug
EPC Pipe Reducing Tee, 3/4 x 1/2 x 1/2 in Nominal Size, Copper, Wrot Copper EPC Pipe Tee, 3/8 in Nominal Size, Copper, Wrot Copper Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Elkhart 32790 Copper Fitting Fatwood 9983 Fire Starter FIRESTARTER SQUARES 24
EPC Pipe Reducing Tee, 3/4 x 1/2 x 3/4 in Nominal Size, Copper, Wrot Copper 100% All natural pine wood hand split approx 8' length. Safe, simple, and mess-free way to start any fire. Use in fireplaces, pellet fuel stoves, and barbecues. Place two (2) sticks in fire area and light with match. Easy to light fire starter squares burn up to 10 minutes. Suitable for fireplaces, woodstoves, charcoal grills or campfires. No toxic fumes. Safe alternative to liquid and gel fire starters. Ideal for igniting fires, even on windy and wet days. Convenient and lightweight survival aid.
Worldwide Sourcing TC-3 Flexible TestCaps Pellet Pipe 243810 Storm Collar Elkhart 30236 Copper Fitting
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Type L pellent vent storm collar used at the top of the flashing to assist in shedding water from the assembly. EPC Pipe Street Adapter, 1/2 in Nominal Size, Copper x FNPT, Wrot Copper
Elkhart 30136 Copper Fitting Fernco PQC-103 Qwik Caps Elkhart 30124 Copper Fitting
EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x FNPT, Wrot Copper Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x FNPT, Wrot Copper
Elkhart 30242 Copper Fitting Worldwide Sourcing TC-4 Flexible Test Caps Elkhart 31290 Copper Fitting
EPC Pipe Street Adapter, 3/4 in Nominal Size, Copper x FNPT, Wrot Copper For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. EPC Pipe Reducing Elbow, Close Rough, Solder, 3/4 x 1/2 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications
Fernco PQC-104 Qwik Caps Elkhart 32640 Copper Fitting Elkhart 32076 Copper Fitting
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926. EPC Pipe Tee, 1/4 in Nominal Size, Copper, Wrot Copper EPC Pipe Reducer, 1 x 1/2 in Nominal Size, FTG x Copper, Copper
Oatey 33401 Mechanical Test Plug Elkhart Products 82503 Copper Fittings Elkhart 31392 Copper Fitting
Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG EPC Pipe Elbow, Close Rough, Solder, 1/2 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Street Elbow, Close Rough, Solder, 1/4 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications
Elkhart 31412 Copper Fitting Oatey 33402 Mechanical Test Plug Elkhart 30156 Copper Fitting
EPC Pipe Street Elbow, Close Rough, Solder, 1 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x FNPT, Wrot Copper
Elkhart 32084 Copper Fitting Elkhart 31274 Copper Fitting Elkhart 32082 Copper Fitting
EPC Pipe Reducer, 1-1/4 x 3/4 in Nominal Size, FTG x Copper, Copper EPC Pipe Reducing Elbow, Close Rough, Solder, 1/2 x 3/8 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Reducer, 1-1/4 x 1 in Nominal Size, FTG x Copper, Copper
Elkhart 31306 Copper Fitting Elkhart 10156882 Copper Fitting FIRESTARTER GEL160Z
EPC Pipe Elbow, Close Rough, Solder, 1-1/4 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Drop Ear Tube Elbow, 90 deg, 1/2 in Nominal Size, Sweat, Cast Copper Ethanol Based. Odorless & Smokeless. Lights Instantly. Non-Toxic and gentle on the Environment.
Elkhart 10156816 Copper Fitting Elkhart 31298 Copper Fitting FIRESTARTER GEL 160Z
EPC Pipe Elbow, 1/2 in Nominal Size, Copper x FPT, 90 deg, Cast Copper EPC Pipe Reducing Elbow, Close Rough, Solder, 1 x 3/4 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications Ethanol based, lights instantly. Smokeless and odourless. Gentle on the environment.
Elkhart Products 30134 Copper Fittings Oatey 33403 Mechanical Test Plug Elkhart Products 10156856 Copper Fittings
EPC Pipe Reducing Adapter, 1/2 X 3/4 in Nominal Size, Copper x FNPT, Wrot Copper Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG EPC Drop Ear Tube to Pipe Elbow, 90 deg, 1/2 in Nominal Size, Sweat x FPT, Cast Copper
Elkhart 31416 Copper Fitting Lignetics FG10 Wood Pellet Fuel Imperial BM0042 Large End Stove Pipe Slip Joint with 2 in Collar
EPC Pipe Street Elbow, Close Rough, Solder, 1-1/4 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications Made from recycled, renewable sawmill waste. Contain all-natural biomass products and are manufactured at the highest quality control levels, designating our wood pellet fuel as premium grade. Produces a consistent, high BTU output and produce less than one percent ash. Allows custom connection between two pipe joints without cutting pipe. Tapered to slide into pipe.
Elkhart 32094 Copper Fitting Elkhart 32704 Copper Fitting Elkhart 10156842 Copper Fitting
EPC Pipe Reducer, 1-1/2 x 3/4 in Nominal Size, FTG x Copper, Copper EPC Pipe Reducing Tee, 1/2 x 1/2 x 3/4 in Nominal Size, Copper, Wrot Copper EPC Pipe Elbow, 1/2 in Nominal Size, Copper x Male, 90 deg, Cast Copper
Elkhart 10156826 Copper Fitting Elkhart 30436 Copper Fitting Elkhart 10135464 Copper Fitting
EPC Pipe Elbow, 3/4 in Nominal Size, Copper x Male, 90 deg, Cast Copper EPC Pipe Street Adapter, 1/2 in Nominal Size, FTG x MIP, Wrot Copper EPC Tube to Pipe Elbow, 90 deg, 1/2 in Nominal Size, Sweat x FIP, Cast Copper
B K Industries 160-003HC Compression Couplings Elkhart 80009 Copper Fitting GEL FIRESTARTER 320Z
Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. EPC Pipe Tee, 1/2 in Nominal Size, Copper, Wrot Copper Ethanol Based. Odorless & Smokeless. Lights Instantly. Non-Toxic and gentle on the Environment.
Elkhart 31420 Copper Fitting Elkhart 32818 Copper Fitting Imperial BM0044 Large End Stove Pipe Slip Joint with 2 in Collar
EPC Pipe Street Elbow, Close Rough, Solder, 1-1/2 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Tee, 1 in Nominal Size, Copper, Wrot Copper Allows custom connection between two pipe joints without cutting pipe. Tapered to slide into pipe.
FIRESTARTER MULTI-USE 12PK    Elkhart 31314 Copper Fitting Elkhart Products 82504 Copper Fittings
Specially designed to use like kindling but with added fire power to get any size fire going. Tested and certified as a low VOC emission charcoal starter. Made from a 100% renewable blend of wax and recycled bio-mass fibers.  Starts wood fires in fireplaces, campfires, fire pits & wood stoves. Results in faster and more complete ignition of the wood, reducing emissions of particulate matter and carbon monoxide.  2 sticks stack like an ?x? to start wood fires. 1/2 a stick lights charcoal briquets. 6 Fire Pack (12 sticks) packaged in cellophane wrap. EPC Pipe Elbow, Close Rough, Solder, 1-1/2 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Elbow, Close Rough, Solder, 3/4 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications
FIRESTARTER GEL 320Z          Elkhart 30166 Copper Fitting Elkhart 10156794 Copper Fitting
Ethanol based, lights instantly. Smokeless and odourless. Gentle on the environment. EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x FNPT, Wrot Copper EPC Pipe Elbow, 3/4 in Nominal Size, Copper x FPT, 90 deg, Cast Copper
Fatwood 9904 Fire Starter Fatwood 9987 Fire Starter Elkhart 32824 Copper Fitting
100% All natural pine wood hand split approx 8" length. Safe, simple, and mess-free way to start any fire. Use in fireplaces, pellet fuel stoves, and barbecues. Place two (2) sticks in fire area and light with match. 100% All natural pine wood hand split approx 8' length. Safe, simple, and mess-free way to start any fire. Use in fireplaces, pellet fuel stoves, and barbecues. Place two (2) sticks in fire area and light with match. EPC Pipe Reducing Tee, 1 x 1 x 3/4 in Nominal Size, Copper, Wrot Copper
Elkhart 32828 Copper Fitting Elkhart 30154 Copper Fitting Elkhart 30444 Copper Fitting
EPC Pipe Reducing Tee, 1 x 1 x 1/2 in Nominal Size, Copper, Wrot Copper EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x FNPT, Wrot Copper EPC Pipe Street Adapter, 3/4 in Nominal Size, FTG x MIP, Wrot Copper
FIRELOG STARTER 18OZ.         Elkhart 31322 Copper Fitting Elkhart 32838 Copper Fitting
4 firelighters break apart easily and ignite quickly and burn up to 30 minutes. Using quick start results in faster and more complete ignition of the wood, reducing emissions of particulate matter and carbon monoxide. EPC Pipe Elbow, Close Rough, Solder, 2 in Nominal Size, Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications EPC Pipe Reducing Tee, 1 x 3/4 x 3/4 in Nominal Size, Copper, Wrot Copper
Anderson Metals 754039-06 Flare plug B K Industries 160-004HC Compression Couplings Elkhart 32866 Copper Fitting
UPC individually bagged. Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. EPC Pipe Tee, 1-1/4 in Nominal Size, Copper, Wrot Copper
Elkhart Products 10156858 Copper Fittings Anderson Metals 754039-04 Flare plug Elkhart 10156880 Copper Fitting
EPC Drop Ear Tube to Pipe Elbow, 90 deg, 3/4 in Nominal Size, Sweat x FPT, Cast Copper UPC individually bagged. EPC Drop Ear Tube Elbow, 90 deg, 3/4 in Nominal Size, Sweat, Cast Copper
Elkhart 32920 Copper Fitting Elkhart 32874 Copper Fitting Elkhart 32872 Copper Fitting
EPC Pipe Reducing Tee, 1-1/2 x 1-1/2 x 1/2 in Nominal Size, Copper, Wrot Copper EPC Pipe Reducing Tee, 1-1/4 x 1-1/4 x 3/4 in Nominal Size, Copper, Wrot Copper EPC Pipe Reducing Tee, 1-1/4 x 1-1/4 x 1 in Nominal Size, Copper, Wrot Copper
Elkhart 32918 Copper Fitting B and K Industries 160-005HC Compression Coupling Fatwood 9908 Fire Starter
EPC Pipe Reducing Tee, 1-1/2 x 1-1/2 x 3/4 in Nominal Size, Copper, Wrot Copper Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. Harvested from the stumps of pine trees that contain a high concentration of natural resin. 100 percent natural, with no chemical or additives. User friendly, safe, clean and non-toxic, Indoor or outdoor use. Indefinite shelf life. Can be started with a match, even when wet. SCS Green Cross certified. Great for use in barbecues, campfires, wood stoves, fire pits, pellet stoves, chimneys, coal stoves, fireplaces.
FIRELOG 2-1/2LB US            Elkhart 32910 Copper Fitting Selkirk 243502 Trim Plate
FIRELOG 2-1/2LB US
Our Price: $14.73
Lights fully in less than 5 minute. EPC Pipe Tee, 1-1/2 in Nominal Size, Copper, Wrot Copper Used to finish off the bottom (ceiling) side of a floor/ceiling penetration or on the outside wall as a exterior shield. Over-all size is 12-1/2" x 12-1/2". UL Listed.
Selkirk 243430 Tee Support Selkirk 243520 Wall Bracket Elkhart 10156792 Copper Fitting
Type L pellet vent. Can be used to support either a 3" or 4" diameter tee installation. UL Listed. For use on the exterior to support pipe to wall. Use only with Selkirk pellet stove pipe. Hold pipe 3" from wall. UL Listed. EPC Pipe Elbow, 1/2 x 3/4 in Nominal Size, Copper x FPT, 90 deg, Cast Copper
Elkhart 31424 Copper Fitting Firestart 00045 Fire Starter Fatwood 9910 Fire Starter
EPC Pipe Street Elbow, Close Rough, Solder, 2 in Nominal Size, FTG x Copper, 90 deg, Wrot Copper, For Industrial/Residential Applications Individually wrapped starters that ignite easily and burn up to 30 minutes. Using firestarters results in faster and more complete ignition of the wood, reducing emissions of particulate matter and carbon monoxide. 100% All natural pine wood hand split approx 8' length. Safe, simple, and mess-free way to start any fire. Use in fireplaces, pellet fuel stoves, and barbecues. Place two (2) sticks in fire area and light with match.
Anderson Metals 754039-08 Flare plug Selkirk Platinum 243006 Double Wall Vent Pipe B and K 160-006HC Compression Couplings
UPC individually bagged. Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F. Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe.
FIRELOG IND/OTD 3HR 4.5LB     Selkirk Platinum 3VP Double Wall Vent Pipe Elkhart 80010 Copper Fitting
FIRELOG IND/OTD 3HR 4.5LB
Our Price: $18.42
Lights quickly ? full flames in less than 5 minutes and burns up to 3 hours. Burns 80% cleaner than wood. Use in an indoor, open hearth fireplace or outdoor fireplace or fire pit. UL approved safety classification for use in UL-listed factory built fireplaces. Chimney Safety Institute of America Accepted Product. Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F. EPC Pipe Tee, 3/4 in Nominal Size, Copper, Wrot Copper
Anderson Metals 754039-10 Flare plug B and K 160-007HC Compression Couplings Imperial BM0024 Crimped Elbow
UPC individually bagged. Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. Used to connect two lengths of flue pipe together.
FIRELOG ROASTING CAMPFIRE 4PK FIRELOG 4LB FR/ENG            Elkhart 329782X2X1 Copper Fitting
FIRELOG 4LB FR/ENG
Our Price: $21.80
Creates hot, glowing coals perfect for roasting and cooking campfire foods. Stacks and burns like wood.  Produces 60% less emissions than a similar duration wood fire in a fire pit. Made from a 100% renewable blend of wax and recycled biomass fibers, including real wood charcoal.  Uses 75% less fuel than firewood for an equivalent campfire, resulting in significantly fewer trees cut down for use as firewood. 4 logs (starting with 2) create a hot, robust fire for up to 2 hours. 5 lb, 4-log bundle makes 1 campfire. Lights fully in less than 5 minute. EPC Pipe Reducing Tee, 2 x 2 x 1 in Nominal Size, Copper, Wrot Copper
Elkhart 32974 Copper Fitting B and K Industries 160-008HC Compression Coupling Selkirk DoubleWall Fixed Length Stove Pipe 6 in ID
EPC Pipe Reducing Tee, 2 x 2 x 1-1/2 in Nominal Size, Copper, Wrot Copper Hydroformed steel body, rubber compression gasket, and metal friction ring, rated up to 125 PSI at 210 degrees F., iron pipe size for piping or repairs on galvanized pipe. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
FIRELOG IND/OTD 3HR 4.5LB     Elkhart 32970 Copper Fitting Selkirk Platinum 3VP Double Wall Vent Pipe
FIRELOG IND/OTD 3HR 4.5LB
Our Price: $23.86
Lights quickly ? full flames in less than 5 minutes and burns up to 3 hours. EPC Pipe Tee, 2 in Nominal Size, Copper, Wrot Copper Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F.
Pellet Pipe 243800 Vertical Termination Stove Pipe Cap 8 in OD Selkirk 243243 Adjustable Pipe Connector Selkirk A 243825 Adjustable Pellet Vent Roof Flashing
Vertical round top/termination cap. Type L pellet vent. Cap provides necessary protection of the vent system from rain and other elements. UL Listed. Adjustable pipe connector will connect to 3" appliance outlet and is securely fastened with a hose clamp, while the male end adapts to the standard inlet end of 3" VP pipe, elbow or tee. UL Listed. Type L pellet vent. Flashings are used for keeping water and other debris from entering between the pipe and roof. Adjustable pitch. UL Listed.
Selkirk Platinum 243086 Double Wall Adjustable Length Vent Pipe Selkirk Platinum 3VP Double Wall Vent Pipe Pellet Pipe 243803 Exit Stove Pipe Cap 5-3/4 in L
Type L Air Insulated Pellet Vent Adjustable Length Pipe is designed to be telescoped over a fixed length of vent in order to create an assembly of specific length. Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F. Exit Cone Cap is designed to direct flue gases perpendicular to the wall and to increase their velocity, projecting them further away from the building. UL Listed.
Sure-Temp 266086 Double Wall Adjustable Length Smoke Pipe Pellet Pipe 243230 Type L Vent Stove Pipe Elbow Pellet Pipe 243805 Horizontal Termination Stove Pipe Cap 8 in OD
Used to adjust pipe to desired length. Adjustable from 12" to 18", eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8" per joint. Type L vent systems for pellet stove applications.Used to orient pipe between vertical and horizontal orientation. Rated for flue temperatures up to 570 degrees F. Model VP may be installed with a minimum 1" air space clearance to combustible surfaces, framing lumber, drywall, and plywood. UL Listed. Horizontal Termination Cap is designed specifically for use on installations in which the Type L vent terminates in a horizontal orientation on the outside of a structure. UL Listed.
Selkirk 243410 Ceiling Support Pellet Pipe 243460 Wall Thimble Pellet Pipe 243246 Insulated Type L Chimney Adapter
Type L pellet vent ceiling support/firestop. Type L Pellet Vent Wall Thimble must be used in all thru-the-wall installations involving combustible construction. UL Listed. Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system.
Selkirk Platinum 243060 Double Wall Vent Pipe Pellet Pipe 243230B Type L Vent Stove Pipe Elbow Sure-Temp 266024 Double Wall Fixed Length Smoke Pipe
Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F. Type L vent systems for pellet stove applications.Used to orient pipe between vertical and horizontal orientation. Rated for flue temperatures up to 570 degrees F. Model VP may be installed with a minimum 1" air space clearance to combustible surfaces, framing lumber, drywall, and plywood. UL Listed. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Pellet Pipe 243248 Insulated Type L Chimney Adapter Pellet Pipe 243100 Stove Pipe Tee With Cap Selkirk 268086 Double Wall Adjustable Length Smoke Pipe
Type L Pellet Vent to Selkirk Insulated Chimney Adapters are for use in connecting a Model VP Vent System into an existing Selkirk Chimney system. Type L Air Insulated Pellet Vent Tee with Cap designed for use in changing the orientation of the vent from horizontal to vertical and making inspection and cleaning of pellet stove system easier. UL Listed. Used to adjust pipe to desired length. Adjustable from 12" to 18", eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8" per joint.
Sure-Temp 266036 Double Wall Fixed Length Smoke Pipe DAMPER JOINT 6X24IN BLACK     Selkirk 267036 Double Wall Smoke Pipe
Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. Pre-drilled holes for cast iron damper. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Duraflame 11763 Fireplace Matches 11 in L Imperial BM0102 Half Joint Stove Pipe Imperial BM0101 Stove Pipe
Strike on box matches for fireplaces and grills. Used to connect woodstove to entrance of chimney. Crimped on one end. Used to connect woodstove to entrance of chimney. Crimped on one end.
Imperial BM0103 Half Joint Stove Pipe Flame-Magik KK0316 Color Crystal Selkirk 268036 Double Wall Fixed Length Smoke Pipe
Used to connect woodstove to entrance of chimney. Crimped on one end. Adds colorful blue and green flames in woodstoves, fireplaces and campfires. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Imperial BM0104 Half Joint Stove Pipe Imperial BM0220 Stove Pipe 6 in ID Imperial BM0110 Stove Pipe
Used to connect woodstove to entrance of chimney. Crimped on one end. Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensationand creosote to flow down inside the pipe. Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensation and creosote to flow down inside the pipe.
Imperial BM0111 Stove Pipe FIRESTARTER SQUARES 144       Imperial BM0112 Stove Pipe
Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensation and creosote to flow down inside the pipe. Easy to light fire starter squares burn up to 10 minutes. Suitable for fireplaces, woodstoves, charcoal grills or campfires. No toxic fumes. Safe alternative to liquid and gel fire starters. Ideal for igniting fires, even on windy and wet days. Convenient and lightweight survival aid. Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensation and creosote to flow down inside the pipe.
Selkirk DoubleWall Telescopic Length Stove Pipe 6 in ID Imperial BM0113 Stove Pipe Selkirk 283870 Thru-The-Wall Stove Vent Kit
Includes finishing band. Easily removable for inspection and cleaning. Eliminates the need to cut pipe. For installed length, subtract 1-3/8" per joint. Adjustable 38" to 68" length. Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensation and creosote to flow down inside the pipe. For pellet and corn appliances. Kit contains: 3" horizontal cap, 3" 90 degree elbow, 3" wall bracket, (5) 3" one-foot pipe lengths, 3" tee with cleanout, 3" wall thimble, and 3" pipe connector. System rated for flue temperatures up to 570 degrees. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel, outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103.
Selkirk 284875 High Elevation Stove Vent Kit Lost Coast 10275 Season Firewood Lost Coast 00033 Seasoned Kindling
For pellet and corn appliances. Kit contains: 4" horizontal cap, 4" 90-degree elbow, 4" wall bracket, (5) 4" one-foot pipe lengths, 4" tee with cleanout, 4" wall thimble, 4" tee support, 3" to 4" pellet increaser, 4" pipe connector, and 3" pipe connector. System rated for flue temperatures up to 570 degrees. Proven coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Inner wall is 304 stainless steel, outer wall is paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Meets UL-641 and UL-103. Contains slow and hot burning firewood, such as oak, eucalyptus, madrone, or ash. Offers reliable quality, consistently low moisture content, and is uniformly packaged for stacking and handling. Premium Seasoned and USDA Certified Kiln-Dried. Takes the time and trouble out of starting a fire. Ultra-dry, uniformly split kindling makes starting a fire a snap.
   
 
1