Home > HEATING & COOLING > FIREPLACE & ACCESSORIES > FIREPLACE > HEARTH MATS & STOVE BOARDS
Choose a sub category:
WATER HEATERS - GAS WATER HEATERS - GAS WATER HEATERS - ELECTRIC
WATER HEATERS - ELECTRIC WATER HEATERS - TANKLESS GAS WATER HEATERS - TANKLESS GAS
WATER HEATERS -TANKLESS ELEC WATER HEATERS -TANKLESS ELEC WATER HEATER ACCESSORIES
WATER HEATER ACCESSORIES WATER HEATER REPAIR PARTS WATER HEATER REPAIR PARTS
Sort By:
1
B&K G85-300HC Stud Guard EPC 30626 Tube Cap B&K G85-500HC Stud Guard
Protects pipes and wiring installation. EPC Tube Cap, 1/2 in Nominal, Sweat/Solder End, Wrot Copper, 5/8 in OD Protects pipes and wiring installation.
EPC 30622 Tube Cap EPC 30630 Tube Cap EPC 30624 Tube Cap
EPC Tube Cap, 1/4 in Nominal, Sweat/Solder End, Wrot Copper, 3/8 in OD EPC Tube Cap, 3/4 in Nominal, Sweat/Solder End, Wrot Copper, 7/8 in OD EPC Tube Cap, 3/8 in Nominal, Sweat/Solder End, Wrot Copper, 1/2 in OD
WASHER WATER HEATER SUPPLY    B&K G85-900HC Stud Guard Elkhart Products 30310 Copper Fittings
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Protects pipes and wiring installation. EPC Pipe Adapter, 1/2 in Nominal Size, Copper x MNPT, Wrot Copper
Elkhart Products 31096 Copper Fittings Elkhart 31194 Copper Fitting Elkhart Products 30330 Copper Fittings
EPC Pipe Elbow, Solder, 1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Fitting to copper.  Bagged. EPC Pipe Adapter, 3/4 in Nominal Size, Copper x MNPT, Wrot Copper
B&K G86-800HC Stud Plate Danco 88493 Water Heater Washer EPC 30632 Tube Cap
Protects pipes and wiring installation. Water heater supply line washer. EPC Tube Cap, 1 in Nominal, Sweat/Solder End, Wrot Copper, 1-1/8 in OD
Elkhart Products 31106 Copper Fittings Elkhart 31202 Copper Fitting Camco 11523 Drain Valves
EPC Pipe Elbow, Solder, 3/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Fitting to copper.  Bagged. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Elkhart 31090 Copper Fitting Elkhart 30550 Flush Pipe Reducing Bushing Elkhart 30304 Copper Fitting
EPC Pipe Elbow, Solder, 3/8 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Elkhart Pipe Reducing Bushing, Flush, 3/4 X 1/2 in Nominal, FTG X C End, Wrot Copper, ASTM B75 EPC Pipe Reducing Adapter, 3/8 x 1/2 in Nominal Size, Copper x MNPT, Wrot Copper
Elkhart 30300 Copper Fitting EPC 30634 Tube Cap EPC 30626CP Tube Cap
EPC Pipe Adapter, 3/8 in Nominal Size, Copper x MNPT, Wrot Copper EPC Tube Cap, 1-1/4 in Nominal, Sweat/Solder End, Wrot Copper, 1-3/8 in OD EPC Tube Cap, 1/2 in Nominal, Sweat/Solder End, Wrot Copper, 5/8 in OD
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit EPC 30636 Tube Cap
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. EPC Tube Cap, 1-1/2 in Nominal, Sweat/Solder End, Wrot Copper, 1-5/8 in OD
Elkhart 30318 Copper Fitting Elkhart 31206 Copper Fitting Elkhart 30338 Copper Fitting
EPC Pipe Reducing Adapter, 1/2 x 3/8 in Nominal Size, Copper x MNPT, Wrot Copper Fitting to copper.  Bagged. EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x MNPT, Wrot Copper
B and K 168-003NL Dielectric Unions Elkhart 30556 Flush Pipe Reducing Bushing Camco 10623 Dielectric Nipple
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Elkhart Pipe Reducing Bushing, Flush, 1 X 3/4 in Nominal, FTG X C End, Wrot Copper For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
B K Industries 168-004NL Dielectric Unions Elkhart Products 30316 Copper Fittings Camco 2143 High Watt Density Water Heater Element
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. EPC Pipe Reducing Adapter, 3/4 x 1/2 in Nominal Size, Copper x MNPT, Wrot Copper UL Listed, gasket included.
DRAIN PIPE PERF FLEX 4INX8FT  DRAIN PIPE SOLID FLEX 4INX8FT Elkhart Products 30342 Copper Fittings
Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. EPC Pipe Adapter, 1 in Nominal Size, Copper x MNPT, Wrot Copper
Elkhart 31120 Copper Fitting Hancor 04020010H Drain Pipe WaterFlex 0437012 Corrugated Flexible Water Heater Connector
EPC Pipe Elbow, Solder, 1 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Perforated 3-hole. 120 degree. CSA approved. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Elkhart 30354 Copper Fitting Camco 07223 Adapter Kit B and K 167-004NL Dielectric Unions
EPC Pipe Adapter, 1-1/4 in Nominal Size, Copper x MNPT, Wrot Copper Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Imperial BM0042 Large End Stove Pipe Slip Joint with 2 in Collar Hancor HY-PF1-04-0010 Perforated Single Wall Pipe Hancor 04540010H Solid Single Wall Pipe
Allows custom connection between two pipe joints without cutting pipe. Tapered to slide into pipe. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
B and K 102-816 Water Heater Drain Valves Camco 2343 High Watt Density Water Heater Element Elkhart 30290 Copper Fitting
1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. UL Listed, gasket included. EPC Pipe Adapter, 1/4 in Nominal Size, Copper x MNPT, Wrot Copper
CopperFlex WB034-24N Corrugated Water Heater Connector EPC 30638 Tube Cap Elkhart 30368 Copper Fitting
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. EPC Tube Cap, 2 in Nominal, Sweat/Solder End, Wrot Copper, 2-1/8 in OD EPC Pipe Adapter, 1-1/2 in Nominal Size, Copper x MNPT, Wrot Copper
Elkhart 31134 Copper Fitting WaterFlex 0437018 Corrugated Flexible Water Heater Connector Elkhart 30336 Copper Fitting
EPC Pipe Elbow, Solder, 1-1/2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. EPC Pipe Adapter, 3/4 x 1 in Nominal Size, Copper x MNPT, Wrot Copper
Oatey 43789 Dwv Saddle Tee Kit Elkhart 31128 Copper Fitting Imperial BM0044 Large End Stove Pipe Slip Joint with 2 in Collar
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. EPC Pipe Elbow, Solder, 1-1/4 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications Allows custom connection between two pipe joints without cutting pipe. Tapered to slide into pipe.
B and K 160-303NL Compression Couplings Camco 7723 Dual Element Lower Water Heater Thermostat Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat
Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Genova 61231 Dwv Saddle Tee Camco 2203 High Watt Density Water Heater Element Camco Mfg 10473 Pressure Relief Valve 3/4 In
Solvent welds directly onto the side of a 3" pipe to provide a simple way of connecting a branch into a drain pipe. The inlet is constructed to accept a 2" fitting over its outside diameter or an 1-1/2" pipe into its inside diameter. CAN BE GLUED WITH PVC CEMENT. UL Listed, gasket included. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever.
Camco 4363 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element B and K Industries 168-005NL Dielectric Unions
UL Listed, gasket included. UL Listed, gasket included. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
CopperFlex WB00-12N Water Heater Connector Elkhart 31212 Copper Fitting Elkhart 30348 Copper Fitting
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Fitting to copper.  Bagged. EPC Pipe Reducing Adapter, 1 x 3/4 in Nominal Size, Copper x MNPT, Wrot Copper
Camco 2293 High Watt Density Water Heater Element CONNECTOR SS 3/4F1960X3/4X18IN Camco 2283 High Watt Density Water Heater Element
UL Listed, gasket included. UL Listed, gasket included.
Camco 2263 High Watt Density Water Heater Element Camco 4383 High Watt Density Water Heater Element Oatey 43791 Dwv Saddle Tee Kit
UL Listed, gasket included. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings.
Camco 4603 High Watt Density Water Heater Element Camco 3943 High Watt Density Water Heater Element Plumb Pak PP855-30LF Saddle Tee
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL Listed, gasket included. 1/2" F.I.P. outlet for 1/2" I.P.  or 3/4" O.D.
Camco 2223 High Watt Density Water Heater Element Elkhart 31216 Copper Fitting Camco 01023 Flapper Style Dielectric Heat Trap
UL Listed, gasket included. Fitting to copper.  Bagged. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP.
Elkhart 10156960 Copper Fitting WaterFlex 0437024 Corrugated Flexible Water Heater Connector CopperFlex WB00-15N Water Heater Connector
EPC Pipe Tee, 1/2 in Nominal Size, Copper x Copper x Female, Wrot Copper Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Camco 4503 High Watt Density Water Heater Element Camco 10063 Water Heater Connector Camco 4483 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 2583 Low Watt Density Water Heater Element Camco 2163 High Watt Density Water Heater Element Camco 4523 High Watt Density Water Heater Element
UL & CSA listed, gasket included. UL Listed, gasket included. UL Listed, gasket included.
Elkhart 80310CP Copper Fitting CopperFlex WB00-18N Water Heater Connector Watts 100XL Temperature and Pressure Relief Valve
EPC Pipe Adapter, 1/2 in Nominal Size, Copper x MIP, Wrot Copper Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Oatey 43795 Dwv Saddle Tee Kit Watts LL100XL-150/210 Temperature/Pressure Relief Valve Watts 100XL Temperature and Pressure Relief Valve
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Oatey 43793 Dwv Saddle Tee Kit Camco 4703 Low Watt Density Water Heater Element Camco 2363 High Watt Density Water Heater Element
Complete with tee and U-bolts, nuts and washers. Available in two sizes which provide capability of tapping 1-1/2" or 2" DWV pipe to 3" or 4" existing schedule 40 DWV pipe.  3" x 2" and 4" x 2" spigots accept 1-1/2" schedule 40 DWV inside socket, joins to 2" with 2" couplings. Allows tapping of existing DWV lines without cutting pipe. Fits inside 2" DWV with couplings. UL Listed, gasket included. UL Listed, gasket included.
B and K 160-304NL Compression Couplings Elkhart 10156950 Copper Fitting Camco 4803 High Watt Density Water Heater Element
Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF. EPC Tube Tee, Drop Ear, 1/2 in Nominal Size, Sweat, Wrot Copper High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Oatey 38707 Pipe Guards Oatey 38708 Pipe Guards CopperFlex WB00-24N Water Heater Connector
Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed. Made of polyethylene. Protects copper and plastic in concrete. For non code installations. Will not attack plastic pipe. Polyethylene Sleeving is 4 Mils thick. Fits 1/2", 3/4" and 1" pipes. Boxed. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Camco 23503 Dielectric Union Fluidmaster B1H12 Water Heater Connector Watts 100XL-8-150 Temperature and Pressure Relief Valve
Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Camco 4643 High Watt Density Water Heater Element Elkhart 31220 Copper Fitting Camco 08143 Replacement Single Element Water Heater Thermostat
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Fitting to copper.  Bagged. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Elkhart 30378 Copper Fitting Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector Camco 11572 Anode Rod
EPC Pipe Adapter, 2 in Nominal Size, Copper x MNPT, Wrot Copper Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long.
Fluidmaster B4H18 Water Heater Connector Fluidmaster B3H18 Water Heater Connector Fluidmaster B1H18 Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector Fluidmaster B2H18 Water Heater Connector Elkhart 31140 Copper Fitting
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. EPC Pipe Elbow, Solder, 2 in Nominal Size, Copper, 45 deg, Wrot Copper, For Industrial/Residential Applications
Elkhart Products 30330CP Copper Fittings Fluidmaster B1H24 Water Heater Connector Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector
EPC Pipe Adapter, 3/4 in Nominal Size, Copper x MIP, Wrot Copper Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Plumb Pak PP888-10LF Water Heater Connector Plumb Pak PP888-1LF Water Heater Connector Selkirk Platinum 243006 Double Wall Vent Pipe
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F.
Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 08163 Adjustable Water Heater Upper Thermostat DRAIN PIPE PERF FLEX 4INX25FT
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable.
DRAIN PIPE SOLID FLEX 4INX25FT Camco 7843 Single Element Water Heater Thermostat With HLC Elkhart 10156962 Copper Fitting
Great for diverting water from one place to another, Water will not seep out until it reaches the end of the pipe. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. EPC Pipe Tee, 3/4 in Nominal Size, Copper x Copper x Female, Wrot Copper
Camco 09423 Replacement Gasket Kit Camco 10493 Temperature and Pressure Relief Valves Watts 100XL-8-125 Temperature and Pressure Relief Valve
Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts. Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Selkirk Platinum 3VP Double Wall Vent Pipe Plumb Pak PP888-3LF Water Heater Connector B and K Industries 160-305NL Compression Coupling
Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF.
Imperial BM0024 Crimped Elbow WaterFlex 0437118 Corrugated Flexible Water Heater Connector Cash Acme 22441LF Sharkbite
Used to connect two lengths of flue pipe together. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip.
Cash Acme 22604LF Sharkbite Water Heater Installation Kit VALVE T/P 3/4IN 3-5/16LS150PSI Camco 2923 Ultra Low Watt Density Water Heater Element
Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Temperature and pressure relief valve. Relieves pressure up to 150 psi/210F. 3/4 inlet/outlet, copper alloy body, 3-5/16" shank. UL & CSA listed. Gasket included. Best when water has high mineral content, withstands dry firing, heats in lime and sand buildup that would burn out ordinary elements, highest grade nickel and chromium incoloy,
Camco 2853 Ultra Low Watt Density Water Heater Element Camco 2903 Ultra Low Watt Density Water Heater Element B and K Industries 160-306NL Compression Coupling
UL Listed, gasket included. UL Listed, gasket included. Brass body and nut, rubber gaskets. Rated up to 125 PSI at 210 DegF.
Cash Acme U3088FLEX24LF Braided Flexible Water Heater Connector Camco 10193 Water Heater Connector Kit Selkirk DoubleWall Fixed Length Stove Pipe 6 in ID
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Contains: (2) 3/4" x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll teflon tape. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Plumb Pak PP888-11LF Water Heater Connector Plumb Pak PP888-4LF Water Heater Connector WaterFlex 0437124 Corrugated Flexible Water Heater Connector
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 4943 Ultra Low Watt Density Water Heater Element Selkirk Platinum 3VP Double Wall Vent Pipe Plumb Pak PP888-12LF Water Heater Connector
Best when water has high mineral content. Withstands dry firing. Heats in lime and sand buildup that would burn out ordinary elements. Highest grade nickel and chromium incoloy alloy. Ultra low-watt density (50 watts per square inch). UL & CSA listed. Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel
Selkirk Platinum 243086 Double Wall Adjustable Length Vent Pipe Camco 2723 Low Watt Density Water Heater Element Watts 374A Boiler Pressure Relief Valve
Type L Air Insulated Pellet Vent Adjustable Length Pipe is designed to be telescoped over a fixed length of vent in order to create an assembly of specific length. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1"). Used in hot water boiler applications to protect against excessive pressure on all type of hot water heating boiler equipment. Iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Standard pressure setting: 30 psi, pressure range: rated up to 550,000 BTU/hr at 30 psi (2 bar) setting only.
DRAIN PERF FLEX W/SOCK 4X25FT Plumer's Pack 07013 Thermodisc Contractor Pack Selkirk Platinum 3VP Double Wall Vent Pipe
Exceeds ASTM standards and is made with no-break copolymers for professional grade strength and integrity, Proprietary peak and valley design offers greater surface area and a 30 percent higher load-bearing rating than standard corrugated pipe, Perforated pipe with sock is ideal for French drain application in fine soil, Fittings available to adapt to 3 or 4 in. corrugated pipe and 4 in. PVC, Perfect for tight spaces and curvy places, Taping joints is not necessary. This pipe has spaced slits, so water drains in stages.  It's also perfect for applications such as French drains or dispersing water from flower beds, but works even better in locations where surrounding soil or sand is fine and requires filtration or where debris is considerable. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) TOD lower thermostat #08122  (1) TOD upper thermostat #08162. Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F.
Camco 10183 Water Heater Connector Kit Plumer's Pack 07023 Thermostat Contractor Cash Acme U3068FLEX18BVLF Braided Flexible Water Heater Connector
Contains (2) 3/4" NPT  x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll Teflon tape, (2 )3/4" NPT compression adapters, (1) 1/2" x 24" stainless steel gas connector. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) Apcom style lower thermostat w/protector #07722  (1) Apcom style upper thermostat w/protector #07862. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing.
FMI 12-8DM Double Wall Insulated Chimney Pipe Camco 2953 Ultra Low Watt Density Water Heater Element Sure-Temp 266086 Double Wall Adjustable Length Smoke Pipe
Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. UL127 Listed. Up to 1700 Degree Pipe. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1"). Used to adjust pipe to desired length. Adjustable from 12" to 18", eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8" per joint.
Cash Acme U3088FLEX18BVLF Braided Flexible Water Heater Connector FMI 18-8DM Double Wall Insulated Chimney Pipe Selkirk Platinum 243060 Double Wall Vent Pipe
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. UL127 Listed. Up to 1700 Degree Pipe. Engineered for pellet and corn burning stoves. Coupling joint connects in seconds to assure joint integrity. Gasketed joint design. Painted pipe lengths available for interior use. Inner wall 304 stainless steel, outer wall paintable galvanized. Rolled-over male end eliminates sharp edges. 1" clearance to combustibles. Removable tee cap for inspection and cleaning. Internal spacing bead assures uniform insulating air space between pipe walls. Tested and listed by Underwriters' Laboratories, INC., in accordance with UL-641 Standard for Low Temperature Venting Systems, and applicable requirements from UL-103 Standard for Residential Type and Building Heating Appliance Chimneys. When installed according to Selkirk installation instructions, complies with National Safety Standards such as NFPA-211. Rated for flue temperatures up to 570 degrees F.
Sure-Temp 266024 Double Wall Fixed Length Smoke Pipe FMI 24-8DM Double Wall Insulated Chimney Pipe Sure-Temp 206012 Type HT Insulated Chimney Pipe
Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. UL127 Listed. Up to 1700 Degree Pipe. Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The "solid pack" density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation and also blocks radiation heat transfer. Tested to 2100 degrees F. UL listed.
Selkirk 268086 Double Wall Adjustable Length Smoke Pipe Watts 1156F Feed Water Pressure Regulator Hancor 03510100 Regular Solid Single Wall Pipe 100 ft
Used to adjust pipe to desired length. Adjustable from 12" to 18", eliminating the need to cut pipe. Includes finishing band. For installed length, subtract 1-3/8" per joint. For use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Maximum Pressure: 100psi (6.9 bar). Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
AmeriVent 6HS-12 Triple Wall Insulated Chimney Pipe FMI 36-8DM Double Wall Insulated Chimney Pipe Sure-Temp 266036 Double Wall Fixed Length Smoke Pipe
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 degrees F. as called for in UL 103 HT Standard. Requires 2" air space to combustibles. Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. UL127 Listed. Up to 1700 Degree Pipe. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards.
Sure-Temp 206018 Type HT Insulated Chimney Pipe DAMPER JOINT 6X24IN BLACK     HY-C T2UL3636WW-1 Lined Type 2 Stove Board with Rounded Corners
Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The "solid pack" density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation and also blocks radiation heat transfer. Tested to 2100 degrees F. UL listed. Pre-drilled holes for cast iron damper. Protect floors from intense heat, hot coals, ashes and soot that wood stoves can produce. Use stove boards under other heating appliances such as kerosene, gas and electric heaters.
HY-C T2UL3242GT-1 Lined Type 2 Stove Board with Rounded Corners HY-C T2UL3242ST-1 Lined Type 2 Stove Board with Rounded Corners HY-C T2UL3242BL-1 Lined Type 2 Stove Board with Rounded Corners
Protect floors from intense heat, hot coals, ashes and soot that wood stoves can produce. Use stove boards under other heating appliances such as kerosene, gas and electric heaters. Protect floors from intense heat, hot coals, ashes and soot that wood stoves can produce. Use stove boards under other heating appliances such as kerosene, gas and electric heaters. Protect floors from intense heat, hot coals, ashes and soot that wood stoves can produce. Use stove boards under other heating appliances such as kerosene, gas and electric heaters.
HY-C T2UL3242WW-1 Lined Type 2 Stove Board with Rounded Corners Selkirk 267036 Double Wall Smoke Pipe Hancor 04010100 Perforated Regular Single Wall DWV Pipe 100 ft
Protect floors from intense heat, hot coals, ashes and soot that wood stoves can produce. Use stove boards under other heating appliances such as kerosene, gas and electric heaters. Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Hancor 04020100H 3-Hole Channel Flow Perforated Single Wall Pipe 100 ft Imperial BM0102 Half Joint Stove Pipe Imperial BM0101 Stove Pipe
Perforated 3-hole. 120 degree. CSA approved. Used to connect woodstove to entrance of chimney. Crimped on one end. Used to connect woodstove to entrance of chimney. Crimped on one end.
Hancor 04510100 Regular Solid Single Wall Pipe 100 ft FMI 48-8DM Double Wall Insulated Chimney Pipe Imperial BM0103 Half Joint Stove Pipe
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Inner and outer pipe. The outer pipe, made of galvanized steel, provides cooling air necessary to maintain safe chimney temperatures, while the inner pipe, made of stainless steel, emits gases out of the fireplace. Snap- lock design. UL127 Listed. Up to 1700 Degree Pipe. Used to connect woodstove to entrance of chimney. Crimped on one end.
Selkirk 268036 Double Wall Fixed Length Smoke Pipe Hancor 04730100BS Perforated/Wrap Regular Single Wall Pipe 100 ft Sure-Temp 208012 Type HT Insulated Chimney Pipe
Double Wall stove pipe is a connector pipe that links wood stoves to insulated chimneys. This system features a black aluminized steel outer casing and heavy gauge stainless steel inner liner. 1/4" air space between inner and outer pipes provides superior insulating value. 6" clearance to combustibles. Three metal screws supplied with each length. For installed length, subtract 1-3/8" per joint. Listed to ULC S641 and UL 103 standards. ADS 4" single-wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. The pipe is perforated for subsurface water collection or leaching and wrapped with a non-woven, synthetic wrap material that allows water to flow through, but keeps sand and soil from blocking the pipe. The 100 foot roll of pipe allows installation of long runs with fewer joints. Meets ASTM F405 standards. CSA approved. Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The "solid pack" density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation and also blocks radiation heat transfer. Tested to 2100 degrees F. UL listed.
AmeriVent 8HS-12 Triple Wall Insulated Chimney Pipe Sure-Temp 206024 Type HT Insulated Chimney Pipe Imperial BM0104 Half Joint Stove Pipe
Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 degrees F. as called for in UL 103 HT Standard. Requires 2" air space to combustibles. Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The "solid pack" density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation and also blocks radiation heat transfer. Tested to 2100 degrees F. UL listed. Used to connect woodstove to entrance of chimney. Crimped on one end.
Camco 08421 Water Heater Valves Sure-Temp 208018 Type HT Insulated Chimney Pipe AmeriVent 6HS-24 Triple Wall Insulated Chimney Pipe
4" water column, 1-1/4" shank length, 1/2" NPT gas inlet by 1/2" inverted flare outlet, adjustable 70-160 degrees. Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The "solid pack" density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation and also blocks radiation heat transfer. Tested to 2100 degrees F. UL listed. Pipe sections combine corrosion-resistant stainless steel and sturdy galvanized steel for strong chimney construction. Lightweight pipe with snap-lock joints offers faster, easier installations. Features a space-age refractory blanket between the stainless steel/galvanized walls to withstand intermittent temperatures up to 2100 degrees F. as called for in UL 103 HT Standard. Requires 2" air space to combustibles.
Imperial BM0220 Stove Pipe 6 in ID Sure-Temp 206006 Type HT Insulated Chimney Pipe HY-C T2UL3652GT-1 Lined Type 2 Stove Board with Rounded Corners
Used to connect woodstove to entrance of chimney. Crimped end should be oriented toward the stove to allow for condensationand creosote to flow down inside the pipe. Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The "solid pack" density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation and also blocks radiation heat transfer. Tested to 2100 degrees F. UL listed. Protect floors from intense heat, hot coals, ashes and soot that wood stoves can produce. Use stove boards under other heating appliances such as kerosene, gas and electric heaters.
HY-C T2UL3652ST-1 Lined Type 2 Stove Board with Rounded Corners