Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PLUMBING TOOLS > PIPE/TUBE BENDERS
Sort By:
1
Thermwell P10XB/6 Frost King Worldwide Sourcing 31-1/2B Black Pipe Malleable Plug Thermwell P11XB/6 Frost King
Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
World Wide Sourcing 31-1/4B Black Pipe  Malleable Screwed Plug World Wide Sourcing 31-3/8B Black Pipe  Malleable Screwed Plug World Wide Sourcing B300 10 Black Pipe Malleable Cap
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Flat banded, right hand threads.
Worldwide Sourcing 31-3/4B Black Pipe Malleable Plug Worldwide Sourcing 18-1/2B Black Pipe Malleable Cap World Wide Sourcing B291 6 Black Pipe Fitting
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Flat banded, right hand threads. For steam and water working pressure up to 150 pounds. Squared head, right hand threads.
World Wide Sourcing B300 8 Black Pipe Malleable Cap Worldwide Sourcing 18-3/4B Black Pipe Cap World Wide Sourcing B240 8X6 Black Pipe  Malleable Reducing Coupling
Flat banded, right hand threads. Flat banded, right hand threads. Flat banded, right hand threads. UL Listed.
World Wide Sourcing B300 6 Black Pipe Fitting Anderson Metal 756108-02 Brass Pipe Cap World Wide Sourcing B240 10X8 Black Pipe Red Coupling
Flat banded, right hand threads. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Flat banded, right hand threads. UL Listed.
World Wide Sourcing B240 15X8 Black Pipe Red Coupling World Wide Sourcing BSC 6 Black Pipe Mercfhant Coupling 1/8 In Tundra Plus PR38138UW Pipe Insulation
Flat banded, right hand threads. UL Listed. WORLDWIDE SOURCING Pipe Merchant Coupling, 1/8 in Nominal Size, Threaded, Steel, Black Oxide Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
World Wide Sourcing 24-1/2X3/8B Black Pipe Red Coupling World Wide Sourcing 31-1B Black Pipe Malleable Screwed Plug M-D Building Products 50162 Tube Pipe Insulation
Flat banded, right hand threads. UL Listed. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Pre-cut, self sealing slits for easy application
Anderson Metal 756108-04 Brass Pipe Cap World Wide Sourcing BSC 8 Black Pipe Merchant Coupling Worldwide Sourcing 6-1/2B Black Pipe 90 Degree Street Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. WORLDWIDE SOURCING Pipe Merchant Coupling, 1/4 in Nominal Size, Threaded, Steel, Black Oxide WORLDWIDE SOURCING Pipe Street Elbow, 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide
World Wide Sourcing BSC 10 Black Pipe Merchant Coupling World Wide Sourcing BSC 15 Black Pipe Merchant Coupling World Wide Sourcing 18-1B Black Pipe Malleable Cap
WORLDWIDE SOURCING Pipe Merchant Coupling, 3/8 in Nominal Size, Threaded, Steel, Black Oxide WORLDWIDE SOURCING Pipe Merchant Coupling, 1/2 in Nominal Size, Threaded, Steel, Black Oxide Flat banded, right hand threads.
World Wide Sourcing 6-1/4B Black Pipe 90 Deg St Elbow World Wide Sourcing B240 20X10 Black Pipe Fitting Worldwide Sourcing 24-3/4X1/2B Black Pipe Reducing Coupling
WORLDWIDE SOURCING Pipe Street Elbow, 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide Flat banded, right hand threads. UL Listed. Flat banded, right hand threads. UL Listed.
World Wide Sourcing 6-3/8B Black Pipe Fitting World Wide Sourcing BSC 20 Black Pipe Merchant Coupling Anderson Metal 756108-06 Brass Pipe Cap
WORLDWIDE SOURCING Pipe Street Elbow, 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide WORLDWIDE SOURCING Pipe Merchant Coupling, 3/4 in Nominal Size, Threaded, Steel, Black Oxide One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738108-04 Brass Pipe Cap Anderson Metal 738108-02 Brass Pipe Cap Anderson Metal 738108-06 Brass Pipe Cap
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Worldwide Sourcing 6-3/4B Black Pipe 90 Degree Street Elbow TVM IK00011 Foil Tape World Wide Sourcing 24-1X1/2B Black Pipe Red Coupling
WORLDWIDE SOURCING Pipe Street Elbow, 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide Made of a special UV metallized polypropylene film, with a high tack acrylic adhesive. Flat banded, right hand threads. UL Listed.
World Wide Sourcing 24-1X3/4B Black Pipe Red Coupling World Wide Sourcing B291 32 Black Pipe  Malleable Screwed Plug Worldwide Sourcing NHC-150 No Hub Couplings
Flat banded, right hand threads. UL Listed. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
World Wide Sourcing B291 40 Black Pipe  Malleable Screwed Plug World Wide Sourcing B92 6 Black Pipe 90 Deg St Union World Wide Sourcing B300 32 Black Pipe Malleable Cap
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. WORLDWIDE SOURCING Pipe Street Elbow, 1/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide Flat banded, right hand threads.
Cobra PST075 Tube Bending Springs Cobra PST071 Tube Bending Springs Worldwide Sourcing FC56-1515 Flexible Couplings
For free-form bending of soft copper and aluminum tubing without kinking. Bagged. For free-form bending of soft copper and aluminum tubing without kinking. Bagged. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing NHC-22 No Hub Couplings Cobra PST076 Tube Bending Springs M-D 50140 Pipe Insulation
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. For free-form bending of soft copper and aluminum tubing without kinking. Bagged. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4").
Fernco PNH-150 Flexible Pipe Coupling Anderson Metal 738108-08 Brass Pipe Fittings Worldwide Sourcing TC-150 Drain Pipe Connectors
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Used to extend, alter or repair any combination of 1-1/4" or 1-1/2"  brass or plastic drain pipes. For above ground use only.
Worldwide Sourcing FC56-22 Flexible Couplings World Wide Sourcing B300 40 Black Pipe Malleable Cap Worldwide Sourcing NHC-33 No Hub Couplings
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flat banded, right hand threads. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco PNH-215 Pipe Reducing Coupling M-D 50142 Pipe Insulation World Wide Sourcing BSC 25 Black Pipe Merchant Coupling
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). WORLDWIDE SOURCING Pipe Merchant Coupling, 1 in Nominal Size, Threaded, Steel, Black Oxide
Fernco PTC-150 Flexible Tube Coupling Worldwide Sourcing 27-1/2B Black Pipe Malleable Floor Flange World Wide Sourcing 6-1B Black Pipe Fitting
Quick, easy way to extend, alter or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is is formulated to provide a reliable connection that can be installedin minutes. Carded. Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Street Elbow, 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide
Worldwide Sourcing FC56-215 Flexible Coupling World Wide Sourcing BSC 32 Black Pipe Merchant Coupling Worldwide Sourcing KJ-020 No Hub Coupling
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. WORLDWIDE SOURCING Pipe Merchant Coupling, 1-1/4 in Nominal Size, Threaded, Steel, Black Oxide Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
World Wide Sourcing 24-11/4X1B Black Pipe Red Coupling Worldwide Sourcing FC56-15125 Flexible Couplings Fernco PNH-33 Flexible Pipe Coupling
Flat banded, right hand threads. UL Listed. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
Fernco PDTC150 Drain and Trap Connectors World Wide Sourcing B240 40X32 Black Pipe Red Coupling Worldwide Sourcing NHC-44 No Hub Couplings
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Flat banded, right hand threads. UL Listed. Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
World Wide Sourcing BSC 40 Black Pipe Merchant Coupling Fernco PNH-22 Flexible Pipe Coupling Thermwell FV15H Frost King
WORLDWIDE SOURCING Pipe Merchant Coupling, 1-1/2 in Nominal Size, Threaded, Steel, Black Oxide The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. 1/8" thick, self adhesive vinyl foam and aluminum foil insulation tape for hot and cold pipes. 2"W  x 15'L.
M-D Building 50144 Pipe Insulation Fernco 1056 Flexible Pipe Stock Coupling Anderson Metal 738108-12 Brass Pipe Fitting
Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Size is listed for copper pipe. Subtract appropriate amount for Iron or PVC usage (1/8"-1/4"). Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
World Wide Sourcing 31-2B Black Pipe Malleable Screwed Plug Worldwide Sourcing 22U-205 Flexible Donut Worldwide Sourcing 22U-139 Flexible Donut
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco PDTC215 Drain and Trap Connectors Fernco P22U-139 Compression Reducing Donut Worldwide Sourcing KJ-005 No Hub Couplings
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Worldwide Sourcing KJ-009 No Hub Couplings Fernco PNH-44 Flexible Pipe Coupling Fernco 1056 Flexible Pipe Stock Coupling
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564. The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Worldwide Sourcing DTC-150 Drain Pipe Connectors Fiber Fix 4006 Pipe Repair Wrap Worldwide Sourcing 27-3/4B Black Pipe Malleable Floor Flange
Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only. Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included. Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Worldwide Sourcing FT-150 Flexible Trap Worldwide Sourcing FC56-33 Flexible Couplings Fernco 1059 Flexible Pipe Coupling
Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. For above ground use only. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco 1056 Flexible Pipe Stock Coupling World Wide Sourcing 18-2B Black Pipe Malleable Cap M-D Building Products 02378 Pipe Wrap Tape
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Flat banded, right hand threads. Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.
Worldwide Sourcing 33U-305 Flexible Donut Worldwide Sourcing FC56-44 Flexible Couplings Worldwide Sourcing FC56-32 Flexible Couplings
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-021 Flexible Coupling World Wide Sourcing 6-1-1/4B Black Pipe 90 Deg St Elbow Worldwide Sourcing FC56-315 Flexible Couplings
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. WORLDWIDE SOURCING Pipe Street Elbow, 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco P33U-305 Compression Red Donuts Worldwide Sourcing KJ-018 Flexible Couplings Worldwide Sourcing DTC-215 Drain Pipe Connectors
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Worldwide Sourcing 44U-405 Flexible Donuts Fernco P22U-205 Compression RedDonuts
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
World Wide Sourcing 27-1B Black Pipe Fitting Fernco P33U-205 Compression Reducing Donut Fernco PFT150 Flexible PVC Traps
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. The flexible PVC material adjusts to the pipe's misalignment and installs securely creating a a leak-free connection. Resists freeze damage.  Squeezes to clean; no drain tools or cleaners needed. carded
World Wide Sourcing B240 50X40 Black Pipe Red Coupling Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing 33U-205 Flexible Donut
Flat banded, right hand threads. UL Listed. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing 44U-305 Flexible Donut Fernco 1056 Flexible Pipe Reducing Stock Coupling Worldwide Sourcing KJ-015 Flexible Couplings
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-016 Flexible Couplings Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing KJ-014 Flexible Couplings
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-019 Flexible Couplings Worldwide Sourcing QL-150 Flexible Elbows World Wide Sourcing 6-1-1/2B Black Pipe 90 Deg St Elbow
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. WORLDWIDE SOURCING Pipe Street Elbow, 1-1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide
Genova Products 80011F ABS-DWV Foam Core Pipe World Wide Sourcing BSC 50 Black Pipe Malleable Steel Merchant Coupling Fernco 1056 Flexible Pipe Stock Coupling
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. WORLDWIDE SOURCING Pipe Merchant Coupling, 2 in Nominal Size, Threaded, Steel, Black Oxide Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Worldwide Sourcing 33U-139 Flexible Donut Fernco 1002 Flexible Pipe Reducing Stock Coupling Worldwide Sourcing QL-200 Flexible Elbows
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1002 designed for clay to cast iron or plastic. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fiber Fix 4013 Pipe Repair Wrap Worldwide Sourcing FC56-43 Flexible Coupling Fernco 1056 Flexible Pipe Reducing Stock Coupling
Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco PQL-150 Flexible Dwv Pipe Elbow Worldwide Sourcing KJ-002 Drain Pipe Connectors Worldwide Sourcing KJ-004 Drain Pipe Connectors
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications. Use to extend, alter or repair drain pipes. Can be used for installation of condensate lines on air conditioners. Not for use in potable water applications.
Fernco 1001 Flexible Pipe Stock Coupling Anderson Metal 738108-16 Brass Pipe Cap Fernco 1056 Flexible Dwv Pipe Reducing Coupling
Series 1001 designed for clay to clay. Specially formulated PVC compound positively seals any sewer and drain connection. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco P33U-139 Compression Reducing Donut Worldwide Sourcing KJ-001 Flexible Couplings Fernco P44U-405 Compression Red Donuts
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
Fernco PQL-200 Flexible Dwv Pipe Elbow Fernco 1060 Flexible Pipe Coupling Fernco 1059 Flexible Pipe Coupling
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Worldwide Sourcing 44U-205 Flexible Donut Worldwide Sourcing QT-150 Flexible Tees Worldwide Sourcing KJ-010 No Hub Couplings
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Worldwide Sourcing KJ-008 Flexible Coupling Fernco PQT-150 Flexible Pipe Tee Worldwide Sourcing KJ-006 No Hub Couplings
For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
Fernco 1056 Flexible Pipe Stock Coupling Worldwide Sourcing 44U-139 Flexible Donut Worldwide Sourcing QT-200 Flexible Tees
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
M-D Building Products 02394 Pipe Wrap Tape Fernco P1056-100 Drain Pipe Connectors Fernco P1056-075 Drain Pipe Connectors
Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead. Ideal for any drain application that uses  plastic, PVC, CPVC, or copper drain pipes. Makes for fast and easy installation of condensate lines on air conditioning units. Not for use in pressure or POTABLE water applications. Carded.
Fiber Fix 4020 Pipe Repair Wrap Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing KJ-013 Flexible Couplings
Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1060 Flexible Pipe Coupling World Wide Sourcing 27-11/4B Black Pipe Mall Floor Flange Genova Products 80021F ABS-DWV Foam Core Pipe
Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco PQT-200 Flexible Pipe Tee Worldwide Sourcing KJ-017 Flexible Coupling
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. For connecting pipes made of unlike materials such as clay to cast iron.  Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing KJ-011 Flexible Couplings Pro-Flex 3000 Flexible Shielded Pipe Transition Coupling Worldwide Sourcing QL-300 Flexible Elbows
Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Proflex allows you to make transition pipe connections that are resistant to shear forces, while creating a rigid, long-lasting pipe joint. Shielded coupling connects cast iron, plastic, steel, extra-heavy cast iron, and tubular drain waste and vent systems. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1002 Flexible Pipe Stock Coupling World Wide Sourcing 6-2B Black Pipe 90 Deg St Elbow TAPE SILICONE 1INX14FT
TAPE SILICONE 1INX14FT
Our Price: $10.43
Series 1002 designed for clay to cast iron or plastic. WORLDWIDE SOURCING Pipe Street Elbow, 2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Black Oxide Miracle Wrap self-fusing silicone tape. Measures 1" X 14'. Perfect for any outdoor and indoor DIY project including sealing leaks, repairing wiring, renewing grips, and waterproof connections.
Fernco 1056 Flexible Pipe Reducing Stock Coupling Fernco P44U-205 Compression Reducing Donut World Wide Sourcing B321 50 Black Pipe Fitting Mall Floor Flange
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Fernco P44U-305 Compression Red Donuts Fernco 1060 Flexible Pipe Coupling Fernco PQL-300 Flexible Dwv Pipe Elbow
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
World Wide Sourcing 27-11/2B Black Pipe Mall Floor Flange Fernco P44U-139 Compression Reducing Donut Fernco 1056 Flexible Pipe Reducing Stock Coupling
Countersunk screw holes, not faced. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco 1059 Flexible Pipe Coupling Superior Tool 61600 Tube Bender Sets Worldwide Sourcing KJ-012 Flexible Coupling
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Bends copper, aluminum and soft thin-wall tubing. Set of 4, includes 1/4", 3/8", 1/2" and 5/8". Bright plated. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1070 Flexible Pipe Stock Coupling Worldwide Sourcing KJ-007 Flexible Coupling HEAT WRAP FIBERFIX 2IN X 70IN
Series 1070 designed for polyethylene to plastic pipe. Available in 3", 4", 6", and 8" sizes. Connects corrugated polyethylene drainage and irrigation systems to sewere, drain or DWV plastic pipe. Conforms to ASTM D5926. Allows for the repair of plastic pipes without replacing good fittings. Can also be used with plastic traps. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. FiberFix combines industrial-strength fibers and specialized resin into a repair wrap that hardens like steel?made for high-temperature applications. Simply activate the repair wrap in water, wrap tightly around the broken object, and cure with heat. Heat cued, insujlative, heat resistant ujp to 850 degees F, air and water tight.
Fernco PBR-64 O-Ring Fernco 1060 Flexible Pipe Coupling Fernco 1059 Flexible Pipe Coupling
Provide a quick, simple means of making secure connections between most 4" house pipe and 6" sewer pipe. Meets ASTM C443 and C425. Accepted for use in connecting 4" Cl or plastic house pipe to 6" clay, plastic, concrete or A/C sewer pipe. Series 1060 designed for plastic socket to plastic socket. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-socket connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included. Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
Fernco FP-P46 Pow-R Patch Epoxy Patches Fernco FPW248CS Pow-R Wrap Fernco PQT-300 Flexible Pipe Tee
Pow-R-Patch is a complete repair kit that includes a pre-coated fiberglass cloth in a self-contained mixing pounc and a pair of protective gloves. Use on wet or dry surfaces. Will adhere to metal, wood, fiberglass,plastic and more. Flat or Round surface repairs. Holds up to 100 psi. Heat resistant to 425? F. Pow-R-Wrap is a water-activated fiberglass wrap that permanently repairs wet or dry pipe of hose. Self-contained kit includes everything you need to repair a magnitude of applications. Cures in 30-60 minutes. Works on or corroded pipes. Works underwater- fresh or salt. Ideal for repairing copper, plastics, PVC pipe, rubber, fiberglass, galvanized and concrete. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Worldwide Sourcing QT-300 Flexible Tees Worldwide Sourcing KJ-003 Corrugated Flex Coupling Fernco XJ-150 Flexible Pipe Expansion Joint Coupling
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. For specific use underground. Designed with ring stopper on the inside of the coupling to connect corrugated polyethylene drainage pipe and irrigation systems to plastic DWV pipe. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMOPS 109, PS90, & CSA B602. Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak.
Worldwide Sourcing QT-400 Flexible Tees Worldwide Sourcing FC56-64 Flexible Couplings Worldwide Sourcing QL-400 Flexible Elbows
Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Connects cast iron, copper, plastic or steel pipe. Extra long for greater versatility. Good for replacing fittings that have been cut off at the joint. For above ground use only. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco 1003 Flexible Pipe Coupling OUTLET SNGL W/INDICATOR LIGHT Fernco 1056 Flexible Pipe Coupling
Series 1003 designed for clay to asbestos cement fibre or ductile iron. Specially formulated PVC compound positively seals any sewer and drain connection. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco PQL-400 Flexible Dwv Pipe Elbow Genova Products 80031F ABS-DWV Foam Core Pipe Mintcraft T0743L Tube Benders
Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Lever style for easy use. Fits 1/4", 5/16" and 3/8" O.D. tubes.
Easy Heat 10802 Pipe Heating Cable Connection Kit GAUGE G-TST INCRMT 0-30PSI 2IN Fernco 1056 Flexible Pipe Reducing Stock Coupling
For electrical power connection and end sealing of Freeze Free pipe heating cable. 0 ? 30 psi 2" increment gas test gauge tests up to 30 psi. The gauge features a durable plastic face and comes in a steel case. The gauge is designed to fit onto 3/4 in. MPT threads. Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
BURNER LOG LIGHTER NAT GAS    T-BURNER LOG LIGHTER NAT GAS  Fernco 1056 Flexible Pipe Stock Coupling
1/2" FIP X 18". 1/2" FIP X 18" Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
Fernco XJ-3 Flexible Pipe Expansion Joint Coupling Worldwide Sourcing FC56-66 Flexible Couplings Fernco PQT-400 Flexible Pipe Tee
Allows for thermal expansion and contraction of drain, waste and vent pipes and inside rain water conductor systems. Unique one-piece construction, internal stops for positive positioning, no sliding parts to malfunction, no packing to jam, freeze or leak. Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground.  Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602. Fits cast iron, copper, steel or lead pipe. Extra length for 90? connection. NOTE: Not recommended for underground connections. For drain waste and vent use only.  Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
Easy Heat EH38 Pipe Cable Thermostat Anderson Metal 738108-32 Brass Pipe Fitting Fernco 1002 Flexible Pipe Reducing Stock Coupling
Temperature regulator used with freeze free pipe cable. On at 38 degrees F. Off at 50 degrees F. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Series 1001 designed for clay to clay. Specially formulated PVC compound positively seals any sewer and drain connection.
Fernco 1056 Flexible Pipe Reducing Stock Coupling VALVE 1/2 LOG LIGHTER ANGLE CP