Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PLUMBING TOOLS > TUBE CUTTERS
Sort By:
1
Worldwide Sourcing 35-1/2X3/8B Black Pipe Hex Bushing World Wide Sourcing B241 20X6 Black Pipe Malleable Pipe Bushing World Wide Sourcing 35-3/8X1/4B Black Pipe Hex Bushing
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1/2 x 3/8 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3/4 x 1/8 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3/8 x 1/4 in Nominal Size, MIP x FIP, Malleable Iron, Black
Worldwide Sourcing 35-3/4X1/2B Black Pipe Hex Bushing Worldwide Sourcing 35-1/2X1/4B Black Pipe Hex Bushing World Wide Sourcing B241 10X6 Black Pipe  Malleable Pipe Bushing
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3/4 x 1/2 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1/2 x 1/4 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3/8 x 1/8 in Nominal Size, MIP x FIP, Malleable Iron, Black
World Wide Sourcing 35-3/4X1/4B Black Pipe Hex Bushing World Wide Sourcing B241 20X10 Black Pipe Hex Bushing World Wide Sourcing 35-1/4X1/8B Black Pipe Hex Bushing
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3/4 x 1/4 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3/4 x 3/8 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1/4 x 1/8 in Nominal Size, MIP x FIP, Malleable Iron, Black
Worldwide Sourcing 11A-1/2B Black Pipe Tee Mintcraft PMB-5053L Sillcock Keys World Wide Sourcing 11A-1/4B Black PipeMalleable Tee
Flat banded, right hand threads. Sillcock key for 1/4" stem. For use on outside water faucets. Flat banded, right hand threads.
World Wide Sourcing B130 10 Black Pipe Malleable Tee Worldwide Sourcing 35-1X3/4B Black Pipe Hex Bushing World Wide Sourcing 35-1X1/2B Black Pipe Hex Bushing
Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1 x 3/4 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1 x 1/2 in Nominal Size, MIP x FIP, Malleable Iron, Black
Worldwide Sourcing 11A-3/4B Black Pipe Tee Mintcraft PMB-508-3L Fitting Brushes Mintcraft PMB-509 Fitting Brushes
Flat banded, right hand threads. MintCraft Fitting Brush, 1/2 in, For Copper Tubing MintCraft Fitting Brush, 3/4 in, For Copper Tubing
SILLCOCK KEY 5/16IN           Harvey's EZ Clean Sand Cloth Oatey 31328 Fitting Brush
SILLCOCK KEY 5/16IN
Our Price: $3.15
Used to open and close sillcocks or spigots. This key will fit 5/16 inch valves. Constructed of metal to provide strength and durability. 120 grit. Flexible, yet strong cotton fabric combined with a tough, hard aluminum oxide abrasive to provide faster cleaning. With two layers of a special adhesive and water resistant resin to provide longer life and consistently stronger solder joints. Packaged in hang tab box. Designed for cleaning, deburring, and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
World Wide Sourcing B130 6 Black Pipe Fitting Oatey 31327 Fitting Brush Oatey 31329 Fitting Brush With 1 in Handle
Flat banded, right hand threads. Designed for cleaning, deburring, and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire. Designed for cleaning, deburring, and polishing the inside of copper fittings prior to soldering. Can also be used to clean plastic and brass. Brush is made of high carbon steel bristles to ensure a long lasting, durable and sharp cutting surface. Contoured plastic handle provides a comfortable grip. Stem is made of galvanized steel wire.
BRUSH TUBE CLEANING 1/2X5/8IN Oatey 31411 Abrasive Sand Cloth BRUSH UTILITY SET
BRUSH UTILITY SET
Our Price: $3.61
Tube cleaning brush for cleaning outer walls of copper pipe. 120 grit for cleaning copper pipe and fittings and other soft metals.  Can be used for polishing, deburring, and roughing copper tubing, as well as plastic pipe.  Water - resistant with resin - bonded flexible cloth backing.  The 100% coverage of the cloth backing, with tough aluminum oxide abrasive, provides fast cleaning and long life. Cleans and prepares surfaces for joining. Set includes (1) brass bristled brush and (1) stainless steel bristled brush. Use to clean and prepare pipe surfaces prior to join. Removes debris, rust, and dirt.
Oatey 31409 Reuseable Grit Pad Oatey 31345 Od Tube Cleaning Brush World Wide Sourcing B241 32X20 Black Pipe Hex Bushing
Will not tear or rust. For cleaning pipe and fittings and general use. Contains two 2"x6" coarse grade nylon pads. O.D. tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding. WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1-1/4 x 3/4 in Nominal Size, MIP x FIP, Malleable Iron, Black
World Wide Sourcing B241 32X15 Black Pipe Hex Bushing BRUSH TUBE CLEANING 3/4X7/8IN World Wide Sourcing B241 40X32 Black Pipe Hex Bushing
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1-1/4 x 1/2 in Nominal Size, MIP x FIP, Malleable Iron, Black Tube cleaning brush for cleaning outer walls of copper pipe. WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1-1/2 x 1-1/4 in Nominal Size, MIP x FIP, Malleable Iron, Black
World Wide Sourcing B241 40X25 Black Pipe Hex Bushing World Wide Sourcing 35-1-1/4X1B Black Pipe Hex Bushing Oatey 31346 Od Tube Cleaning Brush
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1-1/2 x 1 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1-1/4 x 1 in Nominal Size, MIP x FIP, Malleable Iron, Black O.D. tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding.
Plumb Pak PP854-15 All Purpose Cleaning Brush Plumb Pak PP855-3 Abrasive Cloth Superior Tool 42525 Tubing Cutter Wheels
Soft bristles for applying primer, glue, or other solutions. 2 per card. For smoothing pipes to create secure connections. For tube and pipe cutters. Made of alloy steel, heat treated and black oxided. No. 42525: For use with both Superior mini tube cutters (#35025 & #35078).
World Wide Sourcing B241 40X20 Black Pipe Fittings Oatey 31347 Od Tube Cleaning Brush World Wide Sourcing 11A-1B Black Pipe Fitting
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 1-1/2 x 3/4 in Nominal Size, MIP x FIP, Malleable Iron, Black O.D. tube cleaning brush is used for cleaning the outside diameter of copper piping prior to soldering. Can also be used to clean plastic pipe. Cleans outside piping quickly and effectively. Outer cover is made of high impact polystyrene. Brush is made of hard bright tempered steel wire. Easy-to-grip brush ensures a clean surface and prepares the pipe for soldering or solvent welding. Flat banded, right hand threads.
BRUSH TUBE CLEANING 3/8X1/2IN World Wide Sourcing B241 50X25 Black Pipe Hex Bushing 2 x 1 In World Wide Sourcing 35-2X1-1/2B Black Pipe Hex Bushing
Tube cleaning brush for cleaning outer walls of copper pipe. WORLDWIDE SOURCING Pipe Hexagonal Bushing, 2 x 1 in Nominal Size, MIP x FIP, Malleable Iron, Black WORLDWIDE SOURCING Pipe Hexagonal Bushing, 2 x 1-1/2 in Nominal Size, MIP x FIP, Malleable Iron, Black
Cobra PST026 Tubing Cutter Wheel Cobra PST025 Tubing Cutter Wheels Plumb Pak PP840-30 Furnace Keys
Use with PST001 and PST006. Use with PST004. 1 Per Card.
World Wide Sourcing B241 50X20 Black Pipe Hex Bushing Plumb Pak PP874-00PC Shut Off Key Plumb Pak PP840-31 Furnace Keys
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 2 x 3/4 in Nominal Size, MIP x FIP, Malleable Iron, Black Key for loose key stops. Tamper proof. 1 Per Card.
World Wide Sourcing 11A-1 1/4B Black Pipe Malleable Tee Plumb Pak PP855-5 Inside Cleaning Brush General Tools RW121/2 Tube Cutter Wheel
Flat banded, right hand threads. Twisted wire handle. Can be used with power drill. For use with all General cutters for cutting copper tubing.
Mintcraft RP-043L Tubing Cutter Wheel Arrowhead Brass PK1300 Loose Key Handle Plumb Pak PP855-4 Inside Cleaning Brush
Replacement cutter wheel for SKU No. 682.1771. Loose key handle. Fits all models. Twisted wire handle. Can be used with power drill.
Bondo/Dynatron 03131 Plumbers Abrasive Cloth Worldwide Sourcing GN 1/2X18-S Galvanized Pipe Nipples SuperiorTool 35025 Economy
Tough, flexible cloth backing for sanding hard-to-reach areas. Long-lasting, fast cutting. Use for de-burring and metal finishing. 1" X 6' Roll With thread protection on all pipe thread. 5/8? O.D. Mini Tubing Cutter - roller-less design. For use in confined areas on copper, aluminum and mild steel. Zinc-plated body. One-piece knob & screw. Heat-treated alloy steel cutting wheel. Replacement cutter wheel #42525
Superior Tool 42835 Tubing Cutter Wheels World Wide Sourcing 11A-1 1/2B Black Pipe Malleable Tee Cobra PST090 Deburring Tool
No. 42835: For use with all Superior 1-1/8" capacity tube cutters. Flat banded, right hand threads. Deburring Tool removes burrs from plastic and copper tubing.
Mintcraft 24481-3L Tubing Cutters Plumb Pak PP840-35 Tube Cutter Worldwide Sourcing GN 3/4X18-S Galvanized Pipe Nipples
Cuts brass, aluminum and plastic tubing. Zinc body and knob. For tubing 1/8'' O.D. to 5/8'' O.D. With thread protection on all pipe thread.
Worldwide Sourcing GN 1/2X24-S Galvanized Pipe Nipples Mintcraft TCM-120B3L Tubing Cutters Mintcraft T0533L Swaging Tools
With thread protection on all pipe thread. Zinc body, steel knob. Suj2 cutting sheet. For cutting tubes 1/8" to 7/8" O.D. Fits 3/16", 1/4", 5/16", 3/8", 1/2", and 5/8" O.D. tubing.
World Wide Sourcing B241 65X50 Black Pipe Fitting Mintcraft T1543L Sillcock Key World Wide Sourcing GN 1X18-S Galv. Pipe Nipple
WORLDWIDE SOURCING Pipe Hexagonal Bushing, 2-1/2 x 2 in Nominal Size, MIP x FIP, Malleable Iron, Black Hardened steel. Designed to fit 1/4", 9/32", 5/16", and 11/32" square stem. With thread protection on all pipe thread.
Oatey 31321 Open Mesh Abrasive Sand Cloth SuperiorTool 35275 Economy Screw Feed Tube Cutter World Wide Sourcing 11A-2B Black Pipe Malleable Tee
Very long-lasting sharp cutting abrasive for working with copper, brass, or aluminum. 180 open mesh cloth is fully waterproof and may easily be cleaned with water for repeated use. An open nylon fabric with a phenolic resin adhesive provides a rugged, waterproof aluminum oxide cloth of superior quality. Packaged in a dispenser box for clean storage. Carded. Cuts tubing of hard or soft aluminum, brass, copper and thin wall conduit. Tubing rides freely on hardened rollers. Cuts cleanly without burrs or tubing distortion. Flare cut-off rollers permit cutting directly behind a cracked flare without waste. Special Superior long-life alloy cutter wheels. Retractable, hardened reamer blade built-in, locks open or closed. Flat banded, right hand threads.
Flair-It 01150 Plastic Tubing Cutter SuperiorTool 35078 Professional Mintcraft T003-3L Tubing Cutters
Cuts PEX pipe only. Painted with rollers. Cutting capacity 1/8" to 7/8" O.D. For use in confined areas on copper, aluminum and mild steel. Large, knurled knob allows easy tightening. Zinc body, steel knob. Suj2 cutting sheet. For cutting tubes 1/8" to 5/8" O.D.
CUTTER TUBE                   Sharkbite U701A Tube Cutter Worldwide Sourcing GN 3/4X24-S Galvanized Pipe Nipples
CUTTER TUBE
Our Price: $11.30
Tight space tubing cutter.  Cuts up to 1-1/8" (28mm) diameter pipe.  Enclosed threads prevent jams from dirt and debris.  Fixed length design, allows full swing cutting action.  Include replacement blade.  Cuts copper, aluminum and stainless. For use with SharkBite Barb 3/8", 1/2", 3/4" and 1" PEX tubing. With thread protection on all pipe thread.
BRUSH FITTING 4-IN-1          KEY BOX WATER METER BRASS     Oatey 31407 4-in-1 Pipe Fitting Brush
BRUSH FITTING 4-IN-1
Our Price: $11.79
KEY BOX WATER METER BRASS
Our Price: $11.98
4-in-1 fitting brush cleans and prepares copper pipe for joining. fits pipes measuring 1/2"ID or 3/4"ID. and 5/8"OD. or 7/8"O.D. Includes 4 long-lasting high carbon steel brushes for cleaning the ID and OD of 1/2'' and 3/4'' copper tube and fittings. Also used for battery terminals and deburring.
Worldwide Sourcing GN 1/2X30-S Galvanized Pipe Nipples World Wide Sourcing GN 11/4X18-S Galvanized Pipe Nipples Superior Tool 05250 Plumbers Extractor Kit
With thread protection on all pipe thread. With thread protection on all pipe thread. Extract broken pipe quickly and easily. Five sizes: 1/8", 1/4", 3/8", 1/2", and 3/4".
Worldwide Sourcing GN 1/2X36-S Galvanized Pipe Nipples World Wide Sourcing GN 1X24-S Galv. Pipe Nipple Worldwide Sourcing DT-077 Torque Wrenches
With thread protection on all pipe thread. With thread protection on all pipe thread. Tightens steel bands to 60 inch-pounds of torque. Automatically releases once correct torque has been achieved. Designed for use with Orgill Worldwide Sourcing flexible fittings.
SuperiorTool 35180 Professional CUTTER TUBE A/O STYLE         World Wide Sourcing B241 80X50 Black Pipe Hex Bushing
CUTTER TUBE A/O STYLE
Our Price: $13.72
For cutting tubing in close quarters. Hardened alloy steel cutter wheel. Cutting capacity 1/8" to 1-1/8" O.D. Quick adjust tubing cutter.  Cuts up to 1-1/4" (32mm) diameter pipe.  Fast size adjustment, featuring a spring loaded release trigger.  Include replacement blade.  Cuts copper, aluminum and stainless. WORLDWIDE SOURCING Pipe Hexagonal Bushing, 3 x 2 in Nominal Size, MIP x FIP, Malleable Iron, Black
Mintcraft TC-100A3L Tubing Cutters Superior Tool 42215 Tubing Cutter Wheels Superior Tool 03943 Bleckman
Aluminum body and nylon knob. Suj2 cutting wheel. Fold away reamer. For cutting tubes 1/8" to 1-1/8" O.D. No. 42215: For use with No. 02802 pipe cutter 2" capacity. Quick and easy way to remove leaking compression sleeves without damaging walls. Armless design screws directly into compression nut for fast removal. Ideal for working on frozen or corroded supply stops.
Worldwide Sourcing GN 3/4X30-S Galvanized Pipe Nipples Plumb Pak PP840-3 Tube Cutter Mintcraft T006-3L Tubing Cutters
With thread protection on all pipe thread. For tubing 1/8" O.D. to 1-1/8" O.D. Zinc body and nylon knob. Suj2 cutting wheel. For cutting tubes 1/8" to 1-1/8" O.D.
Worldwide Sourcing GN 1/2X48-S Galvanized Pipe Nipples World Wide Sourcing GN 11/2X18-S Galvanized Pipe Nipples SuperiorTool 35236 Screw Feed
With thread protection on all pipe thread. With thread protection on all pipe thread. 1-1/8" O.D. screw-feed tubing cutter. Traditional style heavy duty mid-range cutter. Cuts & deburrs copper, aluminum & mild steel. Durable epoxy powdercoated finish for corrosion-resistance. Heat-treated alloy steel cutting wheel.Replacement cutter wheels #42835 (Cu, Al, Brass) & #42836 (PVC, CPVC, ABS).
Mintcraft WMT30583L Water Meter Keys World Wide Sourcing GN 1X30-S Galvanized Pipe Nipples World Wide Sourcing GN 1/4X60-S Galvanized Pipe Nipples
For turning off/on water supply valves. Black painted finish with MintCraft blue dip coating handle. With thread protection on all pipe thread. With thread protection on all pipe thread.
World Wide Sourcing GN 11/4X24-S Galvanized Pipe Nipples Worldwide Sourcing GN 3/4X36-S Galvanized Pipe Nipples World Wide Sourcing GN 1/2X72-S Galvanized Pipe Nipples
With thread protection on all pipe thread. With thread protection on all pipe thread. With thread protection on all pipe thread.
Worldwide Sourcing GN 1/2X60-S Galvanized Pipe Nipples World Wide Sourcing GN 11/2X24-S Galvanized Pipe Nipples Plumb Pak PP10-7 Air Valve Key
Air Valve Key - Case of 6
Our Price: $18.54
With thread protection on all pipe thread. With thread protection on all pipe thread. Pro-quality plumbing tool. For hot water radiators, convectors, and baseboards. Carded.
THREAD CLEANER                World Wide Sourcing GN 11/4X30-S Galvanized Pipe Nipples World Wide Sourcing GN 1X36-S Galv. Pipe Nipple
THREAD CLEANER
Our Price: $19.02
Cleans threads on hose taps, eliminates the need to replace hose spigot, for hose bibs and male hose ends. Hardened plated steel. Use with 3/8" socket drive or wrench. With thread protection on all pipe thread. With thread protection on all pipe thread.
World Wide Sourcing GN 3/8X60-S Galvanized Pipe Nipples SuperiorTool 35219 Enclosed Feed Tube Cutter Worldwide Sourcing GN 3/4X48-S Galvanized Pipe Nipples
With thread protection on all pipe thread. 1?"O.D. Enclosed-Feed  Capacity. 1/8" to 1-1/8". Cuts tubing of hard or soft aluminum, brass, copper and thin wall conduit. Enclosed feed mechanism to protect threads against dirt and damage. Tubing rides freely on hardened rollers. Cuts cleanly without burrs or tubing distortion. Special Superior long-life alloy cutter wheels. Retractable, hardened reamer blade built in, locks open or closed. With thread protection on all pipe thread.
Worldwide Sourcing GN 3/4X60-S Galvanized Pipe Nipples World Wide Sourcing GN 11/4X36-S Galvanized Pipe Nipples World Wide Sourcing GN 2X18-S Galvanized Pipe Nipples
With thread protection on all pipe thread. With thread protection on all pipe thread. With thread protection on all pipe thread.
KEY/WRENCH BOX METER COMBO    Worldwide Sourcing GN 1X48-S Galvanized Pipe Nipples World Wide Sourcing GN 3/4X72-S Galvanized Pipe Nipples
With thread protection on all pipe thread. With thread protection on all pipe thread.
Mintcraft T0013L Tubing Cutters Flair-It 01175 Pipe Cutter World Wide Sourcing GN 11/2X30-S Galvanized Pipe Nipples
Aluminum body and wheel. Suj2 cutting wheel. For cutting tubes 1/8" to 1-1/8".  Includes spare cutting wheel. Flair-It Pipe Cutter, Universal With thread protection on all pipe thread.
Plumb Pak PP806-20 Sill Cock Key PLUMBERS KNIFE KIT            World Wide Sourcing GN 2X24-S Galvanized Pipe Nipples
PLUMBERS KNIFE KIT
Our Price: $23.18
For 1/4" square stem. Zinc finish, carded. Features a durable stainless steel body with an anodized aluminum handle and a quick blade change feature that requires no tools. The blade is hidden in the handle during storage and is easily accessed with the thumb and locks safely in place. There is a second slot used for any standard reciprocating saw blade that will convert this tool into a saw. The tool also features a hardened steel reamer blade for copper and PVC tubing. The reamer blade is accessed with the thumb and folds back into the handle and is hidden when the job is complete. With thread protection on all pipe thread.
World Wide Sourcing GN 1-1/2X36-S Galvanized Pipe Nipples Lenox S1 Manual Tubing Cutter World Wide Sourcing GN 1X60-S Galv. Pipe Nipple
With thread protection on all pipe thread. Serrated stainless steel blade requires less force to make a cut, leaving a flush end. Rubberized handles allow for confident cutting even in wet or dirty environments. Cuts up to 1" nominal. With thread protection on all pipe thread.
World Wide Sourcing GN 11/4X48-S Galv. Pipe Nipple World Wide Sourcing GN 2X30-S Galvanized Pipe Nipples Wiss WRPCMD Medium Ratchet Pipe Cutter
With thread protection on all pipe thread. With thread protection on all pipe thread. Ratcheting mechanism provides increased convenience and less effort. Allows pipe cutting in tight areas and other hard-to-reach places. Durable metal cutting head and lightweight nylon/fiberglass handle. Use on copper, brass, aluminum and thin-wall conduit material.
World Wide Sourcing GN 1X72-S Galvanized Pipe Nipples World Wide Sourcing GN 11/2X48-S Galvanized Pipe Nipples World Wide Sourcing GN 11/4X60-S Galv. Pipe Nipple
With thread protection on all pipe thread. With thread protection on all pipe thread. With thread protection on all pipe thread.
World Wide Sourcing GN 2X36-S Galvanized Pipe Nipples SuperiorTool ST2000 Pipe/Tube Cutter Wiss WRPCLG Large Ratchet Pipe Cutter
With thread protection on all pipe thread. Combination tube cutter and pipe cutter. Cuts up to 2-1/8" tube and up to 1" pipe. Rental. Ratcheting mechanism provides increased convenience and less effort. Allows pipe cutting in tight areas and other hard-to-reach places. Durable metal cutting head and lightweight nylon/fiberglass handle. Use on copper, brass, aluminum and thin-wall conduit material.
Lenox S2 Manual Tubing Cutter Mintcraft T0053L Tubing Cutter World Wide Sourcing GN 11/2X60-S Galvanized Pipe Nipples
High carbon steel blade cuts rigid plastic tubing with a single cut. Rubberized handles allow for confident cutting even in wet or dirty environments. Cast aluminum body. Cuts up to 1" nominal. Aluminum alloy die cast body and knob. Suj2 cutting wheel. Fold away reamer. For cutting tubes 5/8" to 2-1/8" O.D. With thread protection on all pipe thread.
World Wide Sourcing GN 11/4X72-S Galvanized Pipe Nipples Mintcraft WMT60343L Water Meter Keys World Wide Sourcing GN 2X48-S Galvanized Pipe Nipples
With thread protection on all pipe thread. For turning off/on water supply valves. Black painted finish with MintCraft blue dip coating handle. With thread protection on all pipe thread.
Flair-It 01100 Ratchet Tube Cutter World Wide Sourcing GN 11/2X72-S Galvanized Pipe Nipples World Wide Sourcing GN 2X60-S Galvanized Pipe Nipples
Cuts PEX pipe only. With thread protection on all pipe thread. With thread protection on all pipe thread.
World Wide Sourcing GN 2X72-S Galvanized Pipe Nipples SuperiorTool 2802 Pipe Cutter
With thread protection on all pipe thread. For fast, clean pipe cutting, long shanked frame protects thread on cutter screw from wear. Shockproof malleable frame guaranteed not to break or warp. Spring action cutter prevents damage to rollers. Will cut black iron pipe and hollow galvanized steel fence post. All bearing points. Rental.
   
 
1