Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > PUMP TANKS
Sort By:
1
Simmons 1358 Solid Cable Guard With Split Wire Hole World Wide Sourcing 18-1/4G Galvanized Malleable Cap World Wide Sourcing 18-3/8G Galvanized Malleable Cap
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4" to 6" casing. Easy to use, snap-in wire guide; with split circle wire hole. Flat banded, right hand threads. Flat banded, right hand threads.
Worldwide Sourcing 18-1/2G Galvanized Pipe Malleable Cap Worldwide Sourcing 21-1/2G Galvanized Pipe Malleable Coupling Worldwide Sourcing 21-1/4G Galvanized Pipe Malleable Coupling
Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Coupling, 1/2 in Nominal Size, Threaded, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Coupling, 1/4 in Nominal Size, Threaded, Malleable Iron, Galvanized
Worldwide Sourcing 2A-1/2G Galvanized Pipe 90 Degree Elbow World Wide Sourcing 18-1/8G Galvanized  Malleable Cap World Wide Sourcing 21-1/8G Galvanized Malleable Coupling
WORLDWIDE SOURCING Pipe Elbow, 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Coupling, 1/8 in Nominal Size, Threaded, Malleable Iron, Galvanized
World Wide Sourcing 3/8GM Galvanized Malleable Coupling World Wide Sourcing 4-1/2G Galvanized 45 Deg Elbow Worldwide Sourcing 18-3/4G Galvanized Pipe Malleable Cap
WORLDWIDE SOURCING Pipe Coupling, 3/8 in Nominal Size, Threaded, Malleable Iron, Galvanized Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Flat banded, right hand threads.
Legend 313-404 Water Service Fitting Worldwide Sourcing 21-3/4G Galvanized Pipe Malleable Coupling World Wide Sourcing 2A-1/4G Galvanized 90 Deg Elbow
Recommended on all flexible plastic connections WORLDWIDE SOURCING Pipe Coupling, 3/4 in Nominal Size, Threaded, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Elbow, 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing 2A-3/8G Galvanized 90 Deg Elbow Anderson 736113-0224 Pipe Nipple Anderson 756116-02 Street Pipe Elbow
WORLDWIDE SOURCING Pipe Elbow, 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 736113-0224, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
World Wide Sourcing 4-1/4G Galvanized 45 Deg Elbow World Wide Sourcing PPG120-10 Galvanized 45 Deg Elbow Legend 313-405 Water Service Fitting
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Recommended on all flexible plastic connections
Worldwide Sourcing 2A-3/4G Galvanized Pipe 90 Degree Elbow Anderson 736112-02 Pipe Nipple Anderson 736113-0232 Pipe Nipple
WORLDWIDE SOURCING Pipe Elbow, 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 736112-02, 1/8 in Nominal, NPT End, Close Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0232, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
World Wide Sourcing 18-1G Galv. Pipe Fitting Anderson 38300-0215 Pipe Nipple World Wide Sourcing PPG120-6 Galv. Pipe Fitting
Flat banded, right hand threads. Anderson Pipe Nipple, Series: 38300-0215, 1/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Anderson 736112-06 Pipe Nipple Anderson 736113-0424 Pipe Nipple World Wide Sourcing 4-3/4G Galvanized 45 Deg Elbow
Anderson Pipe Nipple, Series: 736112-06, 3/8 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0424, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
World Wide Sourcing 2A-1/8G Galvanized 90 Deg Elbow Anderson 38300-0220 Pipe Nipple Legend 313-414 Water Service Fitting
WORLDWIDE SOURCING Pipe Elbow, 1/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 38300-0220, 1/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Recommended on all flexible plastic connections.
Anderson 736113-0432 Pipe Nipple Anderson 38300-0415 Pipe Nipple B and K 511-613 Galvanized Malleable Iron Extension Piece
Anderson Pipe Nipple, Series: 736113-0432, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0415, 1/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1.
Anderson 38300-0225 Pipe Nipple Anderson 38300-0815 Pipe Nipple Anderson 736113-0240 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0225, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0815, 1/2 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0240, 1/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines
Legend 313-406 Water Service Fitting Anderson 38300-0615 Pipe Nipple Anderson 756116-04 Street Pipe Elbow
Recommended on all flexible plastic connections. Anderson Pipe Nipple, Series: 38300-0615, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 38300-0230 Pipe Nipple Anderson 756100-02 Pipe Elbow Anderson 38300-0420 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0230, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Elbow, Series: 756100-02, 1/8 in Nominal, FIP End, 90 deg, 1000 psi Working, Brass, Yellow, 250 deg F, Federal Public Law 111-380 Anderson Pipe Nipple, Series: 38300-0420, 1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 736113-0624 Pipe Nipple Worldwide Sourcing 2A-1G Galvanized Pipe 90 Degree Elbow Anderson 38300-0235 Pipe Nipple
Anderson Pipe Nipple, Series: 736113-0624, 3/8 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines WORLDWIDE SOURCING Pipe Elbow, 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 38300-0235, 1/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 738100-04 Pipe Elbow Anderson 738100-06 Pipe Elbow World Wide Sourcing 21-1G Galv. Pipe Fitting
Anderson Pipe Elbow, Series: 738100-04, 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738100-06, 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water WORLDWIDE SOURCING Pipe Coupling, 1 in Nominal Size, Threaded, Malleable Iron, Galvanized
Anderson 738100-02 Pipe Elbow World Wide Sourcing 18-1-1/4G Galvanized  Malleable Cap Anderson 38300-0820 Pipe Nipple
Anderson Pipe Elbow, Series: 738100-02, 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Flat banded, right hand threads. Anderson Pipe Nipple, Series: 38300-0820, 1/2 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0425 Pipe Nipple Oatey 42783 Cover Plates B and K Industries 511-614 Galv. Pipe Fitting
Anderson Pipe Nipple, Series: 38300-0425, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines 6" stainless steel cover plate conceals the clean-out plug access hole. Screw included. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1.
Anderson 736113-0440 Pipe Nipple Anderson 736113-0632 Pipe Nipple Anderson Metal 738119-0604 Brass Pipe Fitting
Anderson Pipe Nipple, Series: 736113-0440, 1/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0632, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines AMC Pipe Reducing Coupling, 3/8 x 1/4 in Nominal Size, IPT, Brass
Anderson Metal 738119-0602 Brass Pipe Reducing Coupling Anderson 736113-0248 Pipe Nipple Anderson 756123-0806 Reducing Pipe Nipple
AMC Pipe Reducing Coupling, 3/8 x 1/8 in Nominal Size, IPT, Brass Anderson Pipe Nipple, Series: 736113-0248, 1/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines F123 1/2" x 3/8" Reducing Hex Red Brass Nipple
Anderson 38300-0620 Pipe Nipple Anderson 38300-0240 Pipe Nipple Simmons 1371 Heat Shrink Kits
Anderson Pipe Nipple, Series: 38300-0620, 3/8 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0240, 1/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Individually packaged splicing kit. Certified lead-free. Heavy duty wall. Includes crimp connectors. Wire sizes: 3-wire 10-12-14.  Sleeve size 3/8" x 3".
Anderson 756122-08 Hex Pipe Nipple Anderson 38300-1215 Pipe Nipple Anderson 38300-0625 Pipe Nipple
UPC individually bagged. Anderson Pipe Nipple, Series: 38300-1215, 3/4 in Nominal, NPT End, 1-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0625, 3/8 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0430 Pipe Nipple Anderson 38300-0825 Pipe Nipple World Wide Sourcing 4-1G Galvanized 45 Deg Elbow
Anderson Pipe Nipple, Series: 38300-0430, 1/4 in Nominal, MNPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0825, 1/2 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
B and K Industries 510-803HN Galv Pipe World Wide Sourcing 21-1 1/4G Galv. Pipe Fitting World Wide Sourcing 18-1-1/2G Galv. Pipe Fitting
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1. WORLDWIDE SOURCING Pipe Coupling, 1-1/4 in Nominal Size, Threaded, Malleable Iron, Galvanized Flat banded, right hand threads.
Anderson 38300-0435 Pipe Nipple Anderson 736113-0448 Pipe Nipple Anderson 38300-0250 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0435, 1/4 in Nominal, MNPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736113-0448, 1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0250, 1/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-1220 Pipe Nipple Anderson 736112-12 Pipe Nipple Anderson Metal 738119-0806 Brass Pipe Fitting
Anderson Pipe Nipple, Series: 38300-1220, 3/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736112-12, 3/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines AMC Pipe Reducing Coupling, 1/2 x 3/8 in Nominal Size, IPT, Brass
Simmons 1235 3-Wire Submersible Splice Kit Anderson 38300-0630 Pipe Nipple Anderson 38300-0830 Pipe Nipple
Compression sleeve for 3 wire.  Wire sizes for 3 wire 10-12-14 submersible cable. Anderson Pipe Nipple, Series: 38300-0630, 3/8 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0830, 1/2 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 185 Cleanout Plug With Raised Head World Wide Sourcing 0745 Galvanized Malleable Cross Anderson 38300-0440 Pipe Nipple
Brass cleanout plug with raised square head for use with slip joint pliers. Flat banded, right hand threads. Anderson Pipe Nipple, Series: 38300-0440, 1/4 in Nominal, NPT End, 4 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0635 Pipe Nipple Anderson 738116-04 Street Pipe Elbow Anderson 738116-02 Street Pipe Elbow
Anderson Pipe Nipple, Series: 38300-0635, 3/8 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 738116-06 Street Pipe Elbow Anderson 738100-08 Pipe Elbow Anderson 38300-0260 Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Elbow, Series: 738100-08, 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Nipple, Series: 38300-0260, 1/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-1225 Pipe Nipple Anderson 38300-16 Pipe Nipple Anderson 38300-0835 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-1225, 3/4 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-16, 1 in Nominal, NPT End, CLOSE in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0835, 1/2 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
World Wide Sourcing 2A-1-1/4G Galv. Pipe Fitting Anderson 38300-0445 Pipe Nipple World Wide Sourcing 21-1 1/2G Galv. Pipe Fitting
WORLDWIDE SOURCING Pipe Elbow, 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 38300-0445, 1/4 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines WORLDWIDE SOURCING Pipe Coupling, 1-1/2 in Nominal Size, Threaded, Malleable Iron, Galvanized
B and K 510-804HN Galvanized Pipe Fittings Anderson 756116-06 Street Pipe Elbow Oatey 185 Cleanout Plug With Raised Head
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Brass cleanout plug with raised square head for use with slip joint pliers.
Anderson 756122-12 Hex Pipe Nipple Anderson 38300-0640 Pipe Nipple Anderson 38300-0450 Pipe Nipple
UPC individually bagged. Anderson Pipe Nipple, Series: 38300-0640, 3/8 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0450, 1/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Oatey 185 Cleanout Plug With Raised Head Anderson 38300-1230 Pipe Nipple Anderson 38300-0840 Pipe Nipple
Brass cleanout plug with raised square head for use with slip joint pliers. Anderson Pipe Nipple, Series: 38300-1230, 3/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0840, 1/2 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
World Wide Sourcing 18-2G Galv. Pipe Fitting World Wide Sourcing 0747 Galvanized P Malleable Cross World Wide Sourcing 4-1-1/4G Galvanized 45 Deg Elbow
Flat banded, right hand threads. Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Anderson 738116-08 Street Pipe Elbow World Wide Sourcing PPG180-25 Galvanized Malleable Cross Anderson 38300-1620 Pipe Nipple
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Flat banded, right hand threads. Anderson Pipe Nipple, Series: 38300-1620, 1 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Genova Products 80011F ABS-DWV Foam Core Pipe Anderson 38300-0845 Pipe Nipple Anderson 38300-1235 Pipe Nipple
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Anderson Pipe Nipple, Series: 38300-0845, 1/2 in Nominal, NPT End, 4-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1235, 3/4 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson Metal 738119-1206 Brass Pipe Reducing Coupling Anderson Metal 738119-1208 Brass Pipe Fitting Anderson 38300-0650 Pipe Nipple
AMC Pipe Reducing Coupling, 3/4 x 3/8 in Nominal Size, IPT, Brass AMC Pipe Reducing Coupling, 3/4 x 1/2 in Nominal Size, IPT, Brass Anderson Pipe Nipple, Series: 38300-0650, 3/8 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 738100-12 Pipe Elbow Worldwide Sourcing 2A1-1/2G Galvanized Pipe 90 Degree Elbow Anderson 738124-08 Street Pipe Elbow
Anderson Pipe Elbow, Series: 738100-12, 3/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water WORLDWIDE SOURCING Pipe Elbow, 1-1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Street Pipe Elbow, Series: 738124-08, 1/2 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 38300-0460 Pipe Nipple World Wide Sourcing 21-2G Galv. Pipe Fitting Anderson 38300-0850 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-0460, 1/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines WORLDWIDE SOURCING Pipe Coupling, 2 in Nominal Size, Threaded, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 38300-0850, 1/2 in Nominal, NPT End, 5 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
World Wide Sourcing 4-1-1/2G Galvanized 45 Deg Elbow Anderson 38300-1625 Pipe Nipple Anderson 38300-1240 Pipe Nipple
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Anderson Pipe Nipple, Series: 38300-1625, 1 in Nominal, NPT End, 2-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1240, 3/4 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-0855 Pipe Nipple Anderson 38300-0660 Pipe Nipple Anderson 738124-12 Street Pipe Elbow
Anderson Pipe Nipple, Series: 38300-0855, 1/2 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0660, 3/8 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Street Pipe Elbow, Series: 738124-12, 3/4 in Nominal, FIP X MIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Anderson 38300-1250 Pipe Nipple Anderson 38300-1245 Pipe Nipple Genova Products 80021F ABS-DWV Foam Core Pipe
Anderson Pipe Nipple, Series: 38300-1250, 3/4 in Nominal, NPT End, 5 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1245, 3/4 in Nominal, NPT End, 4-1/2 in Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Anderson 38300-1630 Pipe Nipple Anderson 38300-1260 Pipe Nipple Anderson 38300-0860 Pipe Nipple
Anderson Pipe Nipple, Series: 38300-1630, 1 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-1260, 3/4 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 38300-0860, 1/2 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 738116-12 Street Pipe Elbow Anderson 38300-1255 Pipe Nipple Simmons 1350 Torque Arrestor
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Nipple, Series: 38300-1255, 3/4 in Nominal, NPT End, 5-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Fits 1" or 1-1/4" Drop Pipe, Fits 4" to 8" well casing. Supplied with 2 stainless steel clamps.
Worldwide Sourcing 2A-2G Galvanized Pipe 90 Degree Elbow Anderson 38300-2020 Pipe Nipple Oatey 185 Cleanout Plug With Raised Head
WORLDWIDE SOURCING Pipe Elbow, 2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Nipple, Series: 38300-2020, 1-1/4 in Nominal, NPT End, 2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Brass cleanout plug with raised square head for use with slip joint pliers.
Oatey 1023 Drum Trap Covers World Wide Sourcing PPG180-32 Galv. Pipe Fitting Anderson Metal 738119-1612 Brass Pipe Fittings
3-1/4"-4" adjustable drum trap cover with 5-1/4" stainless steel cover and rubber gasket. Flat banded, right hand threads. AMC Pipe Reducing Coupling, 1 x 3/4 in Nominal Size, IPT, Brass
Anderson 38300-1635 Pipe Nipple World Wide Sourcing 4-2G Galv. Pipe Fitting Anderson 738100-16 Pipe Elbow
Anderson Pipe Nipple, Series: 38300-1635, 1 in Nominal, NPT End, 3-1/2 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Anderson Pipe Elbow, Series: 738100-16, 1 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, ASME B16.15, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
World Wide Sourcing PPG180-40 Galvanized Malleable Cross Oatey 185 Cleanout Plug With Raised Head Anderson 38300-1640 Pipe Nipple
Flat banded, right hand threads. Brass cleanout plug with raised square head for use with slip joint pliers. Anderson Pipe Nipple, Series: 38300-1640, 1 in Nominal, NPT End, 4 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines
Anderson 38300-2030 Pipe Nipple Anderson 736112-04 Pipe Nipple Oatey 185 Cleanout Plug With Raised Head
Anderson Pipe Nipple, Series: 38300-2030, 1-1/4 in Nominal, NPT End, 3 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, -65 TO 250 deg F, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Anderson Pipe Nipple, Series: 736112-04, 1/4 in Nominal, NPT End, Close Length, SCH 40, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines Brass cleanout plug with raised square head for use with slip joint pliers.
Anderson 738116-16 Street Pipe Elbow Anderson 738100-20 Pipe Elbow World Wide Sourcing PPG180-50 Galvanized Malleable Cross
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Elbow, Series: 738100-20, 1-1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Flat banded, right hand threads.
B&K 511 Pipe Cap Simmons MAB-4 Male Insert Adapter Legend Valve T-4350 Tube to Pipe Coupling
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Simmons Male Insert Adapter, 1 in Drop Pipe, 0.3 lb Load Capacity, Red Brass Bronze body and compression nut, stainless steel gripper ring.
Anderson 736112-08 Pipe Nipple Simmons 9486 Insert Fitting Anderson 756122-02 Hex Pipe Nipple
Anderson Pipe Nipple, Series: 736112-08, 1/2 in Nominal, NPT End, Close Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Brass or Steel Pipe, Low to Medium Pressure Lines 1" insert rope adapter. UPC individually bagged.
Anderson 738100-24 Pipe Elbow Anderson 38300-1660 Pipe Nipple Simmons AV45 Air Volume Controls
Anderson Pipe Elbow, Series: 738100-24, 1-1/2 in Nominal, IPT End, 90 deg, Brass, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Nipple, Series: 38300-1660, 1 in Nominal, NPT End, 6 in Length, Red? Brass, ASTM B43, ASME/ANSI B1.20.1, MS51846 Military, RoHS Complaint, For Copper and Iron Pipe, Low to Medium Pressure Lines Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45:  80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: 100 Maximum Tank Gallons, 3/8'' FIP. 42 Maximum Tank Gallons, 1/4'' FIP.
Simmons AV100 Jet Pump Air Volume Controls Genova Products 80031F ABS-DWV Foam Core Pipe Legend Valve T-4300 Tube to Pipe Coupling
Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45:  80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: 100 Maximum Tank Gallons, 3/8'' FIP. 42 Maximum Tank Gallons, 1/4'' FIP. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
B&K 511 Pipe Coupling Oatey Hub-Fit Gripper Mechanical Cleanout Plug Simmons XSS-4 Long Insert Adapter
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Threaded O-ring, stainless steel hardware. Plug seals 4-1/2" threaded opening. Made with glass-reinforced ABS plastic and natural rubber O-ring. A53 galvanized grade B hot roll electric weld.
Legend Valve T-4305 Tube to Pipe Coupling Legend Valve T-4320 Pipe Coupling B&K 511 Pipe Cap
Legend Valve Tube to Pipe Coupling, Series: T-4305, 3/4 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems Legend Valve Pipe Coupling, Series: T-4320, 3/4 in Nominal, IPS X MIP End, Copper, For All Potable Water Systems Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1.
Oatey 42744 Cleanout Plug With Raised Head Countersunk Simmons MAB-5 Male Insert Adapter Legend Valve 313-209NL Tube to Pipe Adapter
Countersunk and tapped. Simmons Male Insert Adapter, 1-1/4 in Drop Pipe, 0.5 lb Load Capacity, Red Brass Legend Valve Tube to Pipe Adapter, 3/4 X 1 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass
B and K 510-010BC Galvanized Pipe Malleable Iron 90 Degree Elbow Genova Products 80041F ABS-DWV Foam Core Pipe Legend Valve T-4300 Tube to Pipe Coupling
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Legend Valve Tube to Pipe Coupling, Series: T-4300, 1 X 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems
Anderson Metal 738119-0804 Brass Pipe Reducing Coupling Legend Valve T-4350 Tube to Pipe Coupling Anderson 756122-04 Hex Pipe Nipple
AMC Pipe Reducing Coupling, 1/2 x 1/4 in Nominal Size, IPT, Brass Bronze body and compression nut, stainless steel gripper ring. UPC individually bagged.
Legend 313-154NL Water Service Fitting Legend Valve 313-280NL Tube to Pipe Adapter Legend Valve 313-214NL Pack Joint Union
Bronze body and compression nut, stainless steel pipe gripper. Legend Valve Tube to Pipe Adapter, 1 X 3/4 in Nominal, Pack-Joint X MPT End, 100 psi Working, Lead Free Brass Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
B and K 510-210BC Galvanized Pipe Malleable Iron 45 Degree Elbow Legend Valve T-4305 Tube to Pipe Coupling Legend Valve T-4410 Tube Bend
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Legend Valve Tube to Pipe Coupling, Series: T-4305, 1 in Nominal, CTS X FIP End, Copper, For All Potable Water Systems Legend Valve Tube Bend, Series: T-4410, 90 deg, 3/4 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems
B&K 511 Pipe Coupling Legend Valve T-4300 Tube to Pipe Coupling Legend Valve 313-215NL Pack Joint Union
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw. Bronze body and pack joint nut, nylon anti-friction ring, stainless steel split-clamp screw.
Legend Valve T-4433 Tube Bend Legend 313-155NL Water Service Fitting CONTROL AIR SUBMERSIBLE PUMP
Legend Valve Tube Bend, Series: T-4433, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems Bronze body and compression nut, stainless steel pipe gripper. Air volume control for standard air-over-qater tanks. Use with submersible pump.
Legend Valve 313-220NL Pack Joint Union Legend Valve 313-244NL Pack Joint Union Legend Valve T-4411 Tube Bend
Legend Valve Pack Joint Union, 1 X 3/4 in Nominal, CTS X CTS End, Brass/Copper Legend Valve Pack Joint Union, 3/4 in Nominal, IPS X IPS End, Copper Legend Valve Tube Bend, Series: T-4411, 90 deg, 3/4 in Nominal, CTS End, Copper, For All Potable Water Systems
Anderson 756122-06 Hex Pipe Nipple B and K 510-011BC Galvanized Pipe Malleable Iron 90 Degree Elbow Legend Valve 313-384NL Pack Joint Tee
UPC individually bagged. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Legend Valve Pack Joint Tee, 3/4 in Nominal, CTS X MIP End, Copper
Legend Valve T-4410 Tube Bend Sta-Rite U238-5B Air Volume Control Kit Water Worker HT-2B Vertical Pre-charged Well Tank
Legend Valve Tube Bend, Series: T-4410, 90 deg, 1 in Nominal, CTS X MIP End, Copper, For All Potable Water Systems Includes: 1/4" compression fitting for plastic tube, nipple, air volume control and instruction sheet. Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
Legend Valve T-4411 Tube Bend Legend Valve 313-434NL Compression Tee B and K Industries 510-211BC Galv. Pipe Fitting
Legend Valve Tube Bend, Series: T-4411, 90 deg, 1 in Nominal, CTS End, Copper, For All Potable Water Systems Legend Valve Compression Tee, 3/4 in Nominal, CTS End, Copper Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1.
Simmons 705SB Long Tank Cross Legend Valve T-4413 Pipe Elbow Simmons 709SB Long Tank Cross
1" x 10" long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2" female tap in top of cross, 3/4" FIP x 1"MIP tapping on each leg. Legend Valve Pipe Elbow, Series: T-4413, 3/4 in Nominal, IPS End, 90 deg, Copper, For All Potable Water Systems Tank leg length 10", female tapping each leg 3/4", male tapping each leg 1", female tapping top of cross both 1/2", two female tappings  on side 1/4".
Legend Valve 313-394NL Pack Joint Tee Flotec FP7105-00 Vertical Pre-Charged Pressure Tank Legend Valve 313-395NL Pack Joint Tee
Legend Valve Pack Joint Tee, 3/4 in Nominal, CTS End, Copper Factory pre-charged to 20 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for small water systems and lower-flow applications. NSF-61 approved. Non-replaceable diaphragm. Legend Valve Pack Joint Tee, 1 in Nominal, CTS End, Copper
Legend Valve 313-390NL Pack-Joint Pipe Tee Water Worker HT-4B Vertical Pre-charged Well Tank Simmons 1840SB Pitless Adapter
Legend Valve Pipe Tee, Pack-Joint, 3/4 in Nominal, IPS End, Copper Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-Ring. Vertical position indicator. Fits 5"-12" well casing with 1" drop pipe. Factory tested to 250 PSI. Supports 5,000 pounds. Certified Water Tight by the Water Systems Council Pitless Adapter Division.
Legend Valve 313-435NL Compression Tee Anderson Metal 738119-2016 Brass Pipe Reducing Coupling Flotec FP7100-01 Vertical Pre-Charged Pressure Tank
Legend Valve Compression Tee, 1 in Nominal, CTS End, Copper AMC Pipe Reducing Coupling, 1-1/4 x 1 in Nominal Size, IPT, Brass Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for cabins and summer homes. NSF-61 approved. Replaceable air/water separator. Equivalency rating: 15 gal.
Simmons 709SBTP Tank Package Water Worker HT-14HB Horizontal Pre-Charged Well Tank Flotec FP7110T-08 Vertical Pre-Charged Pressure Tank
Includes No.708 - long tank cross (bronze cast), 2" pressure gauge, 1/2" boiler drain, 1/4 x 3 brass nipple, 30-50 FSG-2 switch, and relief valve. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Factory pre-char