Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (WELL) > WELL & JET PUMPS
Sort By:
1
Simmons 1358 Solid Cable Guard With Split Wire Hole Worldwide Sourcing 31-1/4G Galvanized Pipe Malleable Plug Anderson Metal 756109-02 Brass Pipe Plug Cored Square Head
Prevents submersible power cable from rubbing against side of the well. Made from strong polyethylene. Adjustable for 4" to 6" casing. Easy to use, snap-in wire guide; with split circle wire hole. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Anderson Pipe Plug, Cored, Square Head, 1/8 in Nominal Size, MPT, Brass
Worldwide Sourcing 31-3/8G Galvanized Pipe Malleable Plug Anderson Metal 756103-02 Brass Pipe Coupling Worldwide Sourcing 31-1/2G Galvanized Pipe Malleable Plug
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. AMC Pipe Coupling, Barstock, 1/8 in Nominal Size, Threaded, Brass For steam and water working pressure up to 150 pounds. Squared head, right hand threads.
Anderson Metal 756110-0402 Brass Pipe Hex Bushing B&K 510-903HC Lock Nut Anderson Metal 757001-0402 Insert Fittings
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
World Wide Sourcing 31-1/8G Galvanized Malleable Plug Worldwide Sourcing 31-3/4G Galvanized Pipe Malleable Plug Anderson Metal 757001-0202 Insert Fittings
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757014-04 Insert Fittings Anderson Metal 756109-04 Brass Pipe Plug Cored Square Head Anderson Metal 756110-0604 Brass Pipe Fittings
Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Anderson Pipe Plug, Cored, Square Head, 1/4 in Nominal Size, MPT, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 756103-04 Brass Pipe Coupling Anderson Metal 757001-0602 Insert Fittings Anderson Metal 757014-06 Insert Fittings
AMC Pipe Coupling, Barstock, 1/4 in Nominal Size, Threaded, Brass Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Worldwide Sourcing 31-1G Galvanized Pipe Malleable Plug Anderson 756116-02 Street Pipe Elbow Anderson Metal 757014-05 Insert Fittings
For steam and water working pressure up to 150 pounds. Squared head, right hand threads. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
World Wide Sourcing PPG90R-10X8 Galv Pipe Fitting Anderson Metal 756110-0602 Brass Pipe Hex Bushing Anderson Metal 756109-06 Brass Pipe Plug Cored Square Head
WORLDWIDE SOURCING Pipe Reducing Elbow, 3/8 x 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Plug, Square Head, 3/8 in Nominal Size, MPT, Brass
Worldwide Sourcing 6-1/4G Galvanized Pipe 90 Degree Elbow Worldwide Sourcing 6-1/2G Galvanized Pipe 90 Degree Elbow Anderson Metal 757001-0404 Insert Fitting
WORLDWIDE SOURCING Pipe Street Elbow, 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Street Elbow, 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
World Wide Sourcing 2B-1/2X3/8G Galvanized 90 Degree Elbow Anderson Metal 757014-03 Insert Fittings Anderson Metal 757001-0604 Insert Fittings
WORLDWIDE SOURCING Pipe Elbow, 1/2 x 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
BrassCraft 294F Half Union Adapter World Wide Sourcing 6-3/8G Galvanized 90 Deg St Elbow World Wide Sourcing PPG90R-20X10 Galv Pipe Fitting
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. WORLDWIDE SOURCING Pipe Street Elbow, 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 3/4 x 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing PPG121-8 Galvanized 45 Deg Elbow Anderson Metal 738110-0806 Brass Pipe Fittings World Wide Sourcing 2B-3/4X1/2G Galvanized 90 Degree Elbow
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. WORLDWIDE SOURCING Pipe Reducing Elbow, 3/4 x 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
BrassCraft 293M Half Union Adapter World Wide Sourcing PPG121-10 Galvanized 45 Deg Elbow World Wide Sourcing PPG121-15 Galvanized 45 Deg St Elbow
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Anderson Metal 757001-0804 Insert Fittings BrassCraft MAU1-10-8 Gas Adapter Worldwide Sourcing 6-3/4G Galvanized Pipe 90 Degree Elbow
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. WORLDWIDE SOURCING Pipe Street Elbow, 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Anderson Metal 757001-0606 Insert Fitting World Wide Sourcing 6-1/8G Galvanized 90 Deg St Elbow BrassCraft MAU2-10-8 Gas Adapter
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. WORLDWIDE SOURCING Pipe Street Elbow, 1/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
Anderson Metal 756103-06 Brass Pipe Coupling Anderson Metal 756110-0804 Brass Pipe Fitting Anderson 756116-04 Street Pipe Elbow
AMC Pipe Coupling, Barstock, 3/8 in Nominal Size, Threaded, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
World Wide Sourcing PPG130R-15X10 Galv. Pipe Fitting World Wide Sourcing 31-1-1/4G Galv. Pipe Fitting World Wide Sourcing 11A3/4X3/4X1/2G Galvanized Tee
Flat banded, right hand threads. For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Flat banded, right hand threads.
Anderson Metal 738103-04 Brass Pipe Fitting Anderson Metal 738103-06 Brass Pipe Coupling Anderson Metal 738103-02 Brass Pipe Coupling
AMC Pipe Coupling, 1/4 in Nominal Size, FPT, Brass AMC Pipe Coupling, 3/8 in Nominal Size, FPT, Brass AMC Pipe Coupling, 1/8 in Nominal Size, FPT, Brass
World Wide Sourcing PPG130R-20X15X15 Galv Pipe Fitting World Wide Sourcing PPG130R-20X15X20 Galv Pipe Fitting Anderson Metal 756110-0802 Brass Pipe Hex Bushing
Flat banded, right hand threads. Flat banded, right hand threads. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
BrassCraft PSSL-14 Gas Dryer Adapter World Wide Sourcing 31-1-1/2G Galvanized Malleable Plug Anderson Metal 757014-08 Insert Fittings
For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D For steam and water working pressure up to 150 pounds. Squared head, right hand threads. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 738109-08 Brass Pipe Fittings Anderson Metal 757001-0806 Insert Fitting BrassCraft PSSC-62 Gas Supply Adapter
Anderson Pipe Plug, Cored, 1/2 in Nominal Size, IPT, Brass Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. For corrugated tube. Recommended for gas range connections.
FITTING ADAPTER GAS 3/8IN MIP Anderson Metal 738110-1208 Brass Pipe Fittings Anderson Metal 757014-10 Insert Fittings
3/8" OD Flare x 3/8" MIP tapped 1/8 FIP. For use with gas appliances. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
BrassCraft PSSC-66 Gas Supply Adapter Anderson Metal 738110-1206 Brass Pipe Hex Bushing BrassCraft PSSL-16 Gas Supply Union
For corrugated tube. Recommended for gas range connections. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread.
Brass-Craft FU3-6 Pipe Union Anderson Metal 757001-1006 Insert Fittings Simmons 1371 Heat Shrink Kits
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Individually packaged splicing kit. Certified lead-free. Heavy duty wall. Includes crimp connectors. Wire sizes: 3-wire 10-12-14.  Sleeve size 3/8" x 3".
Anderson 738107-06 Pipe Elbow Anderson 738107-02 Pipe Elbow Anderson 738107-04 Pipe Elbow
Anderson Pipe Elbow, Series: 738107-06, 3/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-02, 1/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-04, 1/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Brass-Craft PSSC-63 Male Half Union BrassCraft MAU1-10-12 Gas Adapter BrassCraft MAU2-10-12 Gas Adapter
For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
World Wide Sourcing PPG90R-25X15 Galv Pipe Fitting World Wide Sourcing 2B1X3/4G Galvanized 90 Deg Elbow World Wide Sourcing PPG121-6 Galvanized 45 Deg Elbow
WORLDWIDE SOURCING Pipe Reducing Elbow, 1 x 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 1 x 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Anderson Metal 738109-12 Brass Pipe Fitting Brass-Craft PSSL-15 Female Pipe Union Worldwide Sourcing 6-1G Galvanized Pipe 90 Degree Elbow
Anderson Pipe Plug, Cored, 3/4 in Nominal Size, IPT, Brass For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. WORLDWIDE SOURCING Pipe Street Elbow, 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Anderson Metal 738103-08 Brass Pipe Fittings BrassCraft 2294M Half Union Adapter Brass-Craft PSSC-64 Male Half Union
AMC Pipe Coupling, 1/2 in Nominal Size, FPT, Brass For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP.
Brass-Craft PSSD-43 Male Half Union Anderson Metal 738110-1204 Brass Pipe Fitting Anderson Metal 738110-0804 Brass Pipe Fitting
For 3/8'' ID (1/2'' OD) corrugated tube. Recommended for fixed air heater, gas range, furnace, and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8'' FIP thread. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
World Wide Sourcing 7-3/4G Galvanized 45 Deg St Elbow BrassCraft PSSD-42 Gas Supply Union Simmons 1235 3-Wire Submersible Splice Kit
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. For 3/8'' I.D. (1/2'' OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces, and water heater connections. Use with PlumbShop SD or RSD Series connectors. Compression sleeve for 3 wire.  Wire sizes for 3 wire 10-12-14 submersible cable.
BrassCraft M40-10 Gas Tube Cap Anderson 738107-08 Pipe Elbow World Wide Sourcing 31-2G Galv. Pipe Fitting
For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures. Up to 1/2 psi maximum. Anderson Pipe Elbow, Series: 738107-08, 1/2 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water For steam and water working pressure up to 150 pounds. Squared head, right hand threads.
Worldwide Sourcing 27-1/2G Galvanized Pipe Malleable Floor Flange Anderson 738116-04 Street Pipe Elbow Anderson 738116-02 Street Pipe Elbow
Countersunk screw holes, not faced. Flat banded, right hand threads. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 738116-06 Street Pipe Elbow Anderson Metal 757001-0808 Insert Fittings World Wide Sourcing PPG121-25 Galvanized 45 Deg St Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads.
Anderson Metal 738109-16 Brass Pipe Plug Cored World Wide Sourcing PPG130R-25X20X20 Galvanized Red Tee World Wide Sourcing PPG130R-25X15 Galvanized Red Tee
Anderson Pipe Plug, Cored, 1 in Nominal Size, IPT, Brass Flat banded, right hand threads. Flat banded, right hand threads.
World Wide Sourcing PPG130R-25X20 Galvanized Red Tee Anderson Metal 757001-1208 Insert Fittings Anderson Metal 757001-1212 Insert Fitting
Flat banded, right hand threads. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson 756116-06 Street Pipe Elbow World Wide Sourcing PPG90R-32X20 Mall. Reducing 90 Degree Elbow World Wide Sourcing PPG90R-32X25 Galv Pipe Fitting
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/4 x 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/4 x 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Anderson Metal 738103-12 Brass Pipe Fittings Anderson Metal 738110-1612 Brass Pipe Fittings Anderson Metal 738110-1608 Brass Pipe Hex Bushing
AMC Pipe Coupling, 3/4 in Nominal Size, FPT, Brass One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 757001-0608 Insert Fitting Anderson 54840-06 Space Heater Tube Cap Anderson Metal 757001-1008 Insert Fitting
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
World Wide Sourcing 6-1-1/4G Galv. Pipe Fitting Anderson 738116-08 Street Pipe Elbow Anderson 54806-0606 Tube To Pipe Coupling
WORLDWIDE SOURCING Pipe Street Elbow, 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged.
World Wide Sourcing PPG90R-40X32 Galv Pipe Fitting World Wide Sourcing PPG90R-40X25 Galv Pipe Fitting Anderson 738107-12 Pipe Elbow
WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/2 x 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/2 x 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Elbow, Series: 738107-12, 3/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
World Wide Sourcing 6-1-1/2G Galv. Pipe Fitting Worldwide Sourcing 27-3/4G Galvanized Pipe Malleable Floor Flange World Wide Sourcing PPG130R-32X20 Galv. Pipe Fitting
WORLDWIDE SOURCING Pipe Street Elbow, 1-1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Countersunk screw holes, not faced. Flat banded, right hand threads. Flat banded, right hand threads.
World Wide Sourcing PPG130R-32X25 Galv. Pipe Malleable Reducing Tee Anderson Metal 757001-0302 Insert Fittings Worldwide Sourcing 27-1G Galvanized Pipe Malleable Floor Flange
Flat banded, right hand threads. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Countersunk screw holes, not faced. Flat banded, right hand threads.
World Wide Sourcing PPG121-32 Galvanized 45 Deg Elbow Anderson Metal 738114-16 Brass Pipe Plug Anderson Metal 738103-16 Brass Pipe Fitting
Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. Anderson Pipe Plug, Solid, 1 in Nominal Size, IPT, Red Brass AMC Pipe Coupling, 1 in Nominal Size, FPT, Brass
Anderson Metal 738110-2016 Brass Pipe Fitting Anderson Metal 738109-24 Brass Pipe Fitting Anderson 738116-12 Street Pipe Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Anderson Pipe Plug, Cored, 1-1/2 in Nominal Size, IPT, Brass One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 54800-06 Space Heater Tube Nut Simmons 1350 Torque Arrestor World Wide Sourcing PPG130R-40X20 Galv Pipe Fitting
9/16-24 thread. Bagged with flag tag. Fits 1" or 1-1/4" Drop Pipe, Fits 4" to 8" well casing. Supplied with 2 stainless steel clamps. Flat banded, right hand threads.
World Wide Sourcing PPG130R-40X32 Galv. Pipe Fitting Anderson Metal 757001-0304 Insert Fittings World Wide Sourcing 27-11/4G Galv. Pipe Fitting
Flat banded, right hand threads. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Countersunk screw holes, not faced. Flat banded, right hand threads.
World Wide Sourcing PPG130R-50X40 Galv. Pipe Malleable Reducing Tee World Wide Sourcing PPG121-40 Galvanized 45 Deg St Elbow World Wide Sourcing 6-2G Galv. Pipe Fitting
Flat banded, right hand threads. Standard screwed, for steam and water working pressure up to 150 pounds. Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Street Elbow, 2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Southland 511-810BC Square Head Pipe Plug World Wide Sourcing 27-11/2G Galv. Pipe Fitting World Wide Sourcing 2B-2X1-1/2G Galvanized 90 Degree Elbow
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Countersunk screw holes, not faced. Flat banded, right hand threads. WORLDWIDE SOURCING Pipe Reducing Elbow, 2 x 1-1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Anderson Metal 738103-20 Brass Pipe Coupling Anderson Metal 757001-0504 Insert Fittings Anderson Metal 756121-02 Brass Pipe Fitting
AMC Pipe Coupling, 1-1/4 in Nominal Size, FPT, Brass Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Simmons 450-5 Relief Valve Anderson Metal 738114-20 Brass Pipe Fitting Anderson 738116-16 Street Pipe Elbow
Cast brass finish. Pressure only relief valve. Factory preset at 75 psi. Anderson Pipe Plug, Solid, 1-1/4 in Nominal Size, IPT, Red Brass One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 736140-0604 Brass Pipe Fitting Anderson Metal 738110-0602 Brass Pipe Hex Bushing Anderson Metal 738110-0402 Brass Pipe Hex Bushing
One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0604 Brass Pipe Fitting Anderson 54806-0608 Tube To Pipe Coupling Anderson Metal 54808-0606 Flare Tube Fittings
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag.
Anderson Metal 738103-24 Brass Pipe Fitting Simmons MAB-4 Male Insert Adapter Anderson Metal 738114-04 Brass Pipe Plug
AMC Pipe Coupling, 1-1/2 in Nominal Size, FPT, Brass Simmons Male Insert Adapter, 1 in Drop Pipe, 0.3 lb Load Capacity, Red Brass Anderson Pipe Plug, Solid, 1/4 in Nominal Size, IPT, Red Brass
Anderson Metal 738114-02 Brass Pipe Plug Anderson Metal 738114-06 Brass Pipe Plug Anderson Metal 757002-0606 Insert Fittings
Anderson Pipe Plug, Solid, 1/8 in Nominal Size, IPT, Red Brass Anderson Pipe Plug, Solid, 3/8 in Nominal Size, IPT, Red Brass One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757002-0604 Insert Fittings Anderson Metal 757002-0404 Insert Fittings Simmons 9486 Insert Fitting
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 1" insert rope adapter.
Anderson Metal 736140-0806 Brass Pipe Fitting Anderson Metal 756121-08 Brass Pipe Plug Cored Hex Head Anderson Metal 757002-0406 Insert Fittings
One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Worldwide Sourcing 27-2G Galvanized Pipe Malleable Floor Flange Anderson Metal 54808-0608 Flare Tube Fittings Anderson Metal 756121-04 Brass Pipe Plug Cored Hex Head
Countersunk screw holes, not faced. Flat banded, right hand threads. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Simmons AV45 Air Volume Controls Anderson Metal 757002-0804 Insert Fittings Simmons AV100 Jet Pump Air Volume Controls
Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45:  80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: 100 Maximum Tank Gallons, 3/8'' FIP. 42 Maximum Tank Gallons, 1/4'' FIP. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Used in jet pump water systems. Maintains proper charge in conventional tanks. Prolongs pump life by reducing frequency of cycling. No. AV-45:  80 Maximum Tank Gallons, 1/4'' FIP. No. AV-100: 100 Maximum Tank Gallons, 3/8'' FIP. 42 Maximum Tank Gallons, 1/4'' FIP.
Anderson Metal 757002-0504 Insert Fittings Anderson Metal 736140-1208 Brass Pipe 3/4 x 1/2 In Nominal Anderson Metal 757002-0202 Insert Fittings
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757001-0506 Insert Fittings Anderson Metal 757001-0406 Insert Fittings Southland 511-811BC Square Head Pipe Plug
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1.
Simmons XSS-4 Long Insert Adapter Anderson Metal 757001-0204 Insert Fittings BrassCraft FO-6 Tube Nut
A53 galvanized grade B hot roll electric weld. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 3/8" O.D. tube.
Anderson Metal 757002-0806 Insert Fittings Simmons MAB-5 Male Insert Adapter Anderson Metal 756121-06 Brass Pipe Plug Cored Hex Head
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Simmons Male Insert Adapter, 1-1/4 in Drop Pipe, 0.5 lb Load Capacity, Red Brass One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Anderson Metal 757001-0408 Insert Fittings Anderson Metal 54844-06 Flare Tube Fitting Anderson Metal 757020-0604 Insert Fittings
Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. 9/16''-24 fine thread flare end for space heaters. UPC individually bagged. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D.
Anderson Metal 757002-0608 Insert Fittings Anderson Metal 757002-0808 Insert Fittings B and K Industries 510-310BC Galv Pipe Fitting
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1.
Anderson Metal 757002-0506 Insert Fittings Anderson Metal 757001-0812 Insert Fittings CONTROL AIR SUBMERSIBLE PUMP
One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. +32 degrees to 200 degrees F. temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose I.D. Air volume control for standard air-over-qater tanks. Use with submersible pump.
Sta-Rite U238-5B Air Volume Control Kit Sharkbite EB75 Pressure Regulating Valve Watts LFN45B Pressure Reducing Valve
Includes: 1/4" compression fitting for plastic tube, nipple, air volume control and instruction sheet. Compact iron-body pressure reducing and regulating valve designed for installations where small size and economy are important, and where local codes allow the use of iron body regulators for water service. Intended for use where supply line inlet pressure does not exceed 300 psi. Suitable for either cold or hot water service. Ideal for domestic installations, it automatically reduces and regulates inlet pressure down to the standard factory setting of 45 psi. Features inbuilt back-pass check and fully pressure-balanced piston. NPT threaded female union inlet x NPT female outlet. Compact, versatile, bronze body construction, with built-in strainer and bypass. For residential and light-duty commercial water pressure regulating. Integral stainless steel strainer, removable when bottom plug is removed. Replaceable seat module, serviceable inline. 33 to 180 degrees Fahrenheit temperature range. 400 psi max working pressure. 50 psi standard reducing pressure, adjustable 25 to 75 psi. Bypass feature controls thermal expansion pressure until inlet pressure is above 150 psi. Meets requirements of ASSE Standard 1003 (ANSI A112.26.2); IAPMO Listed.
Simmons 705SB Long Tank Cross Anderson 54748-1508 Tube To Pipe Connector Simmons 709SB Long Tank Cross
1" x 10" long tank cross, silicon bronze fabricated with copper pipe and male fitting, one 1/2" female tap in top of cross, 3/4" FIP x 1"MIP tapping on each leg. 15/16''-16 thread for brass range connectors. UPC individually bagged. Tank leg length 10", female tapping each leg 3/4", male tapping each leg 1", female tapping top of cross both 1/2", two female tappings  on side 1/4".
B and K Industries 510-311BC Galv Pipe Fitting Anderson 54746-1508 Tube To Pipe Coupling Sharkbite EB45 Pressure Regulating Valve
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Half-cartridge based pressure reducing and regulating valve with bronze body. Assembled using the double union nuts with the special sharkbite fittings. Sharkbite fittings can be used on copper, PEX and CPVC. Supplied by factory with a standard delivery setting of 45 psi. Can be adjusted fro 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 200 psi. Suited for either cold or hot water service. Features compact pressure reducing and regulating valves, Certified by ASSE Standard1003, Listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge, Instant push-fit connections.
Sharkbite EB45 Pressure Regulating Valve Anderson 54748-1512 Tube To Pipe Connector Anderson 54746-1512 Tube To Pipe Coupling
Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge. 15/16''-16 thread for brass range connectors. UPC individually bagged. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged.
Sharkbite EB45 Pressure Regulating Valve Simmons 1840SB Pitless Adapter Sharkbite EB45 Pressure Regulating Valve
Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge. Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-Ring. Vertical position indicator. Fits 5"-12" well casing with 1" drop pipe. Factory tested to 250 PSI. Supports 5,000 pounds. Certified Water Tight by the Water Systems Council Pitless Adapter Division. Half-cartridge based pressure reducing and regulating valve with bronze body. Supplied by factory with a standard delivery setting of 45 psi. Outlet pressure can be adjusted from 10-70 psi without changing the spring. Intended for use where supply line pressure does not exceed 400 psi. Suited for either cold or hot water service. Features: Compact pressure reducing and regulating valves, certified to ASSA Standard 1003 and listed by IAPMO and ASSE, By-pass mechanism integral with the cartridge.
Simmons 709SBTP Tank Package Sharkbite EB25 Pressure Regulating Valve Simmons 1822SB Pitless Adapter
Includes No.708 - long tank cross (bronze cast), 2" pressure gauge, 1/2" boiler drain, 1/4 x 3 brass nipple, 30-50 FSG-2 switch, and relief valve. Stainless steel body, orange twist-cap eliminates need for wrench adjustment, numerical indicator show pressure without the need of a gauge, single piece cartridge can be removed with valve body remaining in place, Outlet pressure range: 20-90 psi, Maximum temperature: 180 degrees F., Maximum initial pressure: 300 psi. Compact pitless adapter. Bronze body. For submersible pump applications. Buna-N O-Ring. Vertical position indicator. Fits 5"-12" well casing with 1" drop pipe. Factory tested to 250 PSI. Supports 5,000 pounds. Certified Water Tight by the Water Systems Council Pitless Adapter Division.
PUMP SHALLOW WELL CAST 1/2HP  PUMP CONVERTIBL WELL CAST1/2HP PUMP JET SHALLOW WELL 3/4HP
Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. 1-1/4 NPT suction, 1" discharge/ drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump. Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications.  1-1/4" NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1" discharge/ drive port.Deep well conversion assembly included. 6.4/3.2 amps. 1 year warranty from Superior Pump. 3/4 HP dual voltage motor (115/230v).  Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate.  Pre-mounted, fully adjustable pressure switch.For shallow well applications up to 25' depth. 7.8/3.9 amps, 1-1/4 NPT suction, 1" discharge/dirive port, 20/40 pressure switch, 74 psi max pressure, 13.75 gpm max flow rate. 1 year warranty from superior Pump.