Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (NON-WELL) > MISC NON-WELL PUMPS
Sort By:
1
Anderson Metal 756110-0402 Brass Pipe Hex Bushing Hancor FCE0B030000 External Single Wall Drain End Cap 3 in W B&K 510-903HC Lock Nut
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1.
FITTING DRAIN FLEX COUPLER 4IN FITTING PIPE CONNECTOR UNIVERS Anderson Metal 756108-02 Brass Pipe Cap
For joining 2 cut pieces of flex-Drain (not included), Use to adapt FLEX-Drain to wyes and tees to help provide good fit and function, Adapts FLEX-Drain to end caps and pop-up emitters (caps and emitters not included), Female connections, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit, Maximum working pressure of 70 psi, Polypropylene construction, Rated for soil drain and underground use. Features inner dimensions that connects to 3 in. pipe and an outer dimension that connects to 4 in. pipe. The most economical solution for connecting Flex-Drain 3 in. and 4 in. Corrugated pipe and 4 in. PVC. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
World Wide Sourcing 24-1/4X1/8G Galvanized Red Coupling World Wide Sourcing PPG240-10X6 Galv. Pipe Fitting Worldwide Sourcing 24-3/8X1/4G Galvanized Pipe Reducing Coupling
Flat banded, right hand threads. UL Listed. Flat banded, right hand threads. UL Listed. Flat banded, right hand threads. UL Listed.
World Wide Sourcing 24-1/2X1/4G Galv. Pipe Fitting Worldwide Sourcing 24-1/2X3/8G Galvanized Pipe Reducing Coupling Anderson Metal 756110-0604 Brass Pipe Fittings
Flat banded, right hand threads. UL Listed. Flat banded, right hand threads. UL Listed. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 756108-04 Brass Pipe Cap Hancor 0412AA Single Wall Corrugated External Snap Coupler World Wide Sourcing PPG90R-10X8 Galv Pipe Fitting
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. WORLDWIDE SOURCING Pipe Reducing Elbow, 3/8 x 1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
Anderson Metal 756110-0602 Brass Pipe Hex Bushing World Wide Sourcing 2B-1/2X3/8G Galvanized 90 Degree Elbow Worldwide Sourcing 24-3/4X1/2G Galvanized Pipe Reducing Coupling
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. WORLDWIDE SOURCING Pipe Elbow, 1/2 x 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Flat banded, right hand threads. UL Listed.
Anderson Metal 756108-06 Brass Pipe Cap World Wide Sourcing 24-3/4X1/4G Galvanized Red Coupling World Wide Sourcing 24-3/4X3/8G Galvanized Red Coupling
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Flat banded, right hand threads. UL Listed. Flat banded, right hand threads. UL Listed.
Anderson Metal 738108-04 Brass Pipe Cap Anderson Metal 738108-02 Brass Pipe Cap Anderson Metal 738108-06 Brass Pipe Cap
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Hancor 0432AA Single Wall Solid Snap End Cap World Wide Sourcing PPG90R-20X10 Galv Pipe Fitting Anderson Metal 738110-0806 Brass Pipe Fittings
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. WORLDWIDE SOURCING Pipe Reducing Elbow, 3/4 x 3/8 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Hancor 0433AA Single Wall Solid Internal Snap Plug World Wide Sourcing 2B-3/4X1/2G Galvanized 90 Degree Elbow FITTING DWNSPT ADPT 3X4IN BLK
For horizontal applications only. CSA approved. WORLDWIDE SOURCING Pipe Reducing Elbow, 3/4 x 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Polypropylene construction, Adapts to fit 3 in. or 4 in. corrugated pipe and 4 in. PVC pipe (not included), DWV applications, Maximum working pressure of 70 psi, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit, Flexible to fit most angles and provide easy connections.
FITTING DOWNSPOUT ADPT 2INX3IN Anderson Metal 756110-0804 Brass Pipe Fitting Worldwide Sourcing 24-1X3/4G Galvanized Pipe Reducing Coupling
Polypropylene construction provides durability, Flexible design is ideal for tight spots and curved spaces, Provides easy and versatile connections, Fits 4 inch pipe. Compatible with 2 in. x 3 in. downspouts, 70 psi maximum pressure rating, Exceeds ASTM standards. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Flat banded, right hand threads. UL Listed.
World Wide Sourcing PPG240-25X10 Galv Pipe Fitting Anderson Metal 738108-08 Brass Pipe Fittings Anderson Metal 756110-0802 Brass Pipe Hex Bushing
Flat banded, right hand threads. UL Listed. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance.Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
World Wide Sourcing 24-1X1/2G Galvanized Red Coupling Hancor 0462AA Single Wall Clay Snap Adapter FITTING ELBOW/CONNECT FLEX 4IN
Flat banded, right hand threads. UL Listed. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Polypropylene construction, Expands up to 21 in. to reach pipes that have been cut short and to help repair damaged sections of pipe, Flexible to create angles or turns, Maximum working pressure of 70 psi, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit,  Adapts to fit 3 in. or 4 in. corrugated pipe and 4 in. PVC pipe (not included), DWV applications
NDS 248 Corrugated Drain Fitting Anderson Metal 738110-1208 Brass Pipe Fittings Anderson Metal 738110-1206 Brass Pipe Hex Bushing
Extra wide, provides more area for channel connections. Use with 400 SPEE-D Series One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 738107-06 Pipe Elbow Anderson 738107-02 Pipe Elbow Anderson 738107-04 Pipe Elbow
Anderson Pipe Elbow, Series: 738107-06, 3/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-02, 1/8 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Anderson Pipe Elbow, Series: 738107-04, 1/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water
Hancor 0364AA Corrugated Drain Downspout Adapter World Wide Sourcing PPG90R-25X15 Galv Pipe Fitting World Wide Sourcing 2B1X3/4G Galvanized 90 Deg Elbow
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. WORLDWIDE SOURCING Pipe Reducing Elbow, 1 x 1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 1 x 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing 24-11/4X3/4G Galvanized Red Coupling World Wide Sourcing PPG240-32X15 Galv. Pipe Coupling Hancor 0417AA Single Wall Corrugated Internal Snap Coupler
Flat banded, right hand threads. UL Listed. Flat banded, right hand threads. UL Listed. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC or metal. CSA approved.
NDS 249 Offset Drain End Cap Adapter B and K Industries 510-803HN Galv Pipe Anderson Metal 738110-1204 Brass Pipe Fitting
Fits #TTABO040750 bottom outlet adapter. No channel cutting required. Usewith 400 SPEE-D series. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0804 Brass Pipe Fitting Anderson Metal 738108-12 Brass Pipe Fitting World Wide Sourcing 24-11/4X1G Galv Pipe Fitting
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Flat banded, right hand threads. UL Listed.
Hancor 0464AA Corrugated Drain Downspout Adapter Anderson 738107-08 Pipe Elbow Hancor 0465AA Corrugated Large Downspout Adapter
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Anderson Pipe Elbow, Series: 738107-08, 1/2 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved.
FITTING DRAIN FLEXIBLE 4IN T/Y Worldwide Sourcing 27-1/2G Galvanized Pipe Malleable Floor Flange World Wide Sourcing 24-11/2X3/4G Galvanized Red Coupling
Polypropylene construction, Adapts to fit 3 in. or 4 in. corrugated pipe and 4 in. PVC pipe (not included), Flexes to become a wye or tee, For DWV applications, Maximum working pressure of 70 psi, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit, Bends to fit most angles. Countersunk screw holes, not faced. Flat banded, right hand threads. Flat banded, right hand threads. UL Listed.
World Wide Sourcing 24-11/2X1G Galvanized Red Coupling Anderson Metal 750065-05 Brass Compression Elbow Simmons 1243 Air Valve
Flat banded, right hand threads. UL Listed. UPC individually bagged. For all charging applications. For use with conventional tanks.
World Wide Sourcing 24-11/2X11/4G Galv Pipe Fitting Simmons 31/2OD Standard Water Well Pump Valve B and K 510-804HN Galvanized Pipe Fittings
Flat banded, right hand threads. UL Listed. Waterproof impregnated lower valve for regular service. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, Threads: ANSI B1.20.1.
World Wide Sourcing PPG90R-32X20 Mall. Reducing 90 Degree Elbow World Wide Sourcing PPG90R-32X25 Galv Pipe Fitting Anderson Metal 738110-1612 Brass Pipe Fittings
WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/4 x 3/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/4 x 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-1608 Brass Pipe Hex Bushing Anderson 50869-0402 Tube Elbow Simmons 1-11/16X5/8 Pump Cup
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. UPC individually bagged. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Hancor 0490AA Single Wall Snap Elbow Hancor 0421AA Single Wall Snap Tee Simmons 1244 Air Valve
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. For all charging applications. For use with conventional tanks.
Simmons 11/4X1/2 Pump Cup Anderson Metal 738108-16 Brass Pipe Cap World Wide Sourcing PPG90R-40X32 Galv Pipe Fitting
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/2 x 1-1/4 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized
World Wide Sourcing PPG90R-40X25 Galv Pipe Fitting Anderson 738107-12 Pipe Elbow Worldwide Sourcing 27-3/4G Galvanized Pipe Malleable Floor Flange
WORLDWIDE SOURCING Pipe Reducing Elbow, 1-1/2 x 1 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Anderson Pipe Elbow, Series: 738107-12, 3/4 in Nominal, FIP End, 45 deg, 200 psi Working, Brass, Rough, 150 deg F, Federal Government S.3874, Federal Public Law 111-380, FixAll AB 1953, For Potable Water Countersunk screw holes, not faced. Flat banded, right hand threads.
World Wide Sourcing PPG240-50X20 Galvanized Red Coupling Hancor 0422AA Single Wall Pipe Wye World Wide Sourcing 24-2X1G Galvanized Red Coupling
Flat banded, right hand threads. UL Listed. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Flat banded, right hand threads. UL Listed.
World Wide Sourcing 24-2X11/4G Galvanized Red Coupling Worldwide Sourcing 27-1G Galvanized Pipe Malleable Floor Flange World Wide Sourcing 24-2X11/2G Galv Pipe Fitting
Flat banded, right hand threads. UL Listed. Countersunk screw holes, not faced. Flat banded, right hand threads. Flat banded, right hand threads. UL Listed.
Anderson Metal 738110-2016 Brass Pipe Fitting Simmons 946 Extra Heavy Recessed Drive Coupling Simmons 2X11/4 Pump Cup
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. Reduces O.D. to allow for greater waterway. Entire coupling galvanized. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Simmons 2X5/8 Pump Cup World Wide Sourcing 27-11/4G Galv. Pipe Fitting Anderson Metal 738104-04 Brass Pipe Union
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Countersunk screw holes, not faced. Flat banded, right hand threads. Anderson Pipe Union, 1/4 in Nominal Size, FPT, Brass
Anderson Metal 738104-06 Brass Pipe Union Anderson Metal 738104-02 Brass Pipe Fitting Simmons 8385L Standard Water Well Pump Valve
Anderson Pipe Union, 3/8 in Nominal Size, FPT, Brass Anderson Pipe Union, 1/8 in Nominal Size, FPT, Brass Waterproof impregnated lower valve for regular service.
Anderson Metal 738104-08 Brass Pipe Union Simmons 3X2 Pump Cup World Wide Sourcing 27-11/2G Galv. Pipe Fitting
Anderson Pipe Union, 1/2 in Nominal Size, FPT, Brass Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Countersunk screw holes, not faced. Flat banded, right hand threads.
World Wide Sourcing 2B-2X1-1/2G Galvanized 90 Degree Elbow Simmons 1695 Malleable Point Well Drive Cap Simmons 3X1/2 Pump Cup
WORLDWIDE SOURCING Pipe Reducing Elbow, 2 x 1-1/2 in Nominal Size, Threaded, 90 deg, Malleable Iron, Galvanized Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Anderson Metal 736140-0604 Brass Pipe Fitting Anderson Metal 738104-12 Brass Pipe Fittings Anderson Metal 738106-161612 Brass Pipe Fitting
One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. Anderson Pipe Union, 3/4 in Nominal Size, FPT, Brass Anderson Pipe Reducing Tee, 1 x 1 x 3/4 in Nominal Size, IPT, Brass
Anderson Metal 754048-0608 Brass Flare Fittings Anderson Metal 738110-0602 Brass Pipe Hex Bushing Anderson Metal 738110-0402 Brass Pipe Hex Bushing
UPC individually bagged. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson Metal 738110-0604 Brass Pipe Fitting Anderson Metal 754048-0806 Brass Flare Connector Anderson Metal 750065-04 Brass Compression Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are 'American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. UPC individually bagged. UPC individually bagged.
NDS Spee-D Corrugated Channel Grate Anderson Metal 736140-0806 Brass Pipe Fitting Anderson Metal 754048-0402 Brass Flare Connectors
Open surface area 38.76 square inches. 3/8" grate opening. Need 2 per 4 f/t off size-D channel. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight. UPC individually bagged.
Worldwide Sourcing 27-2G Galvanized Pipe Malleable Floor Flange Anderson Metal 754048-0808 Brass Flare Fittings Anderson Metal 736140-1208 Brass Pipe 3/4 x 1/2 In Nominal
Countersunk screw holes, not faced. Flat banded, right hand threads. UPC individually bagged. One piece construction. Used with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight.
Simmons 31/2X21/4 Pump Cup Anderson Metal 738104-16 Brass Pipe Union Anderson Metal 754048-1008 Brass Flare Fittings
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Anderson Pipe Union, 1 in Nominal Size, FPT, Brass UPC individually bagged.
Anderson Metal 738108-32 Brass Pipe Fitting Anderson Metal 754048-0804 Brass Flare Fitting Anderson 750070-0606 Tube Elbow
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. UPC individually bagged. UPC individually bagged.
Anderson Metal 750065-06 Brass Compression Fitting Simmons 1161 Plunger Assembly Simmons 152 Double Drop Double Hole Well Seal
UPC individually bagged. For No.22368A pump. Complete with rod. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
Simmons 111 Single Drop Single Hole Well Seal Square D FSG2J20CP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J20BP Pumptrol Type FSG Water Pump Pressure Switch
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
Square D Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J21CP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J21BP Pumptrol Type FSG Water Pump Pressure Switch
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF or internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed.
Square D Pumptrol Type FSG Water Pump Pressure Switch Square D Pumptrol Type FHG Air Compressor Pressure Switch Square D FSG2J21M4BP Pumptrol Type FSG Water Pump Pressure Switch
Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA 1 enclosure, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individually boxed. Air compressor pressure switch suitable for small electrically driven air compressors, set for Off at 100 PSI. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 20 PSIG. Adjustable Cut out range 40-100 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Water pump pressure switch factory set to 30-50 PSI.  Suitable for use on all types of pumps including jet, submersible, and reciprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individially boxed.
Square D FSG2J21M1BP Pumptrol Type FSG Water Pump Pressure Switch Square D FSG2J20M4BP Pumptrol Type FSG Water Pump Pressure Switch Anderson Metal 754048-0404 Brass Flare Connectors
Water pump pressure switch factory set to 30-50 PSI.  Suitable for use on all types of pumps including jet, submersible, and recriprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes a maintained manual cut-out lever allowing the pump to run on auto or to be turned off. Rated for 1.5 hp at 115 v and 2 hp at 230 v. Individially boxed. Water pump pressure switch factory set to 20-40 PSI.  Suitable for use on all types of pumps including jet, submersible, and reciprocating.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified, Includes low pressure cut-off to stop pump in the event of run dry or a line break. Individially boxed. UPC individually bagged.
Anderson Metal 754048-0612 Brass Flare Connectors Anderson 750070-0608 Reducing Tube Elbow Anderson Metal 754048-0812 Brass Flare Connectors
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Square D Pumptrol 2-Way Type FHG Air Compressor Pressure Switch Square D FHG12J52XBP Pumptrol 2-Way Type FHG Air Compressor Pressure Switch Anderson Metal 754048-1012 Brass Flare Connectors
Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. Air compressor pressure switch suitable for small electrically driven air compressors, includes a two way pressure release valve. Contacts open on rising pressure.  2 Pole, NEMA Type 1 indoor inclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant. Non adjustable differential 30 PSIG Adjustable Cut out range 70-150 PSIG 1.5 HP @115Vac, 2 HP @230Vac. Individially boxed. UPC individually bagged.
Anderson 750069-0404 Tube Elbow Anderson 750069-0806 Tube Elbow Anderson Metal 754048-0604 Brass Flare Fitting
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Wayne 66033-WYN1 Jet Pump Pressure Switch Anderson Metal 738104-20 Brass Pipe Fitting Anderson 750069-0604 Reducing Tube Elbow
For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded. Anderson Pipe Union, 1-1/4 in Nominal Size, FPT, Brass UPC individually bagged.
Anderson Metal 750069-0402 Brass Fittings Anderson Metal 754048-0606 Brass Flare Fittings NDS Spee-D Fabricated Spigot Bottom Outlet With Strainer
UPC individually bagged. UPC individually bagged. Can be installed anywhere along the channel, allowing for more versatile system configurations. Comes ready to install. Fits 3" and 4" S/D pipe. Grate not included.
Wayne 66025-WYN1 Jet Pump Pressure Switch Simmons 136 Single Drop Single Hole Well Seal Anderson 750069-0808 Tube Elbow
For domestic water systems, air compressors (not requiring mechanical release valves and where pressure does not exceed 65 PSI) and miscellaneous applications for gases and liquids which are not harmful to the Buna-N-diaphragm or the plated steel diaphragm housing. 1/4" FNPTF. Connection 1 HP at 120/240 Volt AC; 1,2,3 phase. 1/4 HP at 32 volt DC. Carded. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. UPC individually bagged.
NDS 400 Corrugated Drain Fitting Anderson Metal 738104-24 Brass Pipe Union Anderson Metal 750065-08 Brass Compression Elbow
5" PVC channel to manage water flow. Adapters and grates sold separately. Anderson Pipe Union, 1-1/2 in Nominal Size, FPT, Brass UPC individually bagged.
Simmons 177 Double Drop Double Hole Well Seal Anderson 750069-0606 Tube Elbow Anderson 750069-1008 Reducing Tube Elbow
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. UPC individually bagged. UPC individually bagged.
Anderson Metal 750065-10 Brass Compression Fittings Anderson 750069-0406 Tube Elbow Anderson 750069-0608 Tube Elbow
UPC individually bagged. UPC individually bagged. UPC individually bagged.
Anderson Metal 738106-121208 Brass Pipe Fitting Square D Pumptrol Float Liquid Level Switch Anderson Metal 738108-20 Brass Pipe Fitting
Anderson Pipe Reducing Tee, 3/4 x 3/4 x 1/2 in Nominal Size, IPT, Brass Float Switch designed for use in open tank or sump pump applications.   Reverse action contacts open on liquid rise. 2 pole, NEMA 1 enclosure, bracket mounted, Screw clamp terminals, UL/CSA Listed, RoHS compliant, contacts open on liquid rise. Rated for 2 hp at 115 v and 3 hp at 230 v. Individially boxed. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Sta-Rite Industries FP217-810 Well Pump Control Box Sta-Rite Industries FP217-811 Well Pump Control Box Simmons 758 Waterlight Well Cap
For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. Heavy duty cast iron, 5 bolt construction, 1/4" grounding lug, 9/16" screened vent, non toxic lead free paint, 1" NPT conduit connection. Casing ID.: 6" & 6-1/4"
Sta-Rite Industries FP217-812 Well Pump Control Box Simmons 1160 Pitcher Pump Anderson 750069-0408 Tube Elbow
For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. Designed for rugged, long life service, all parts are made from close grain cast iron for optimum strength. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Base tapped for 1-1/4" pipe connection. If handle is left in up position and no foot valve is listed, entire pump will drain-prevents freezing. UPC individually bagged.
Square D 9013GSG2J20 Mechanical Pressure Switch Simmons 0 Well Point Simmons 0 Well Point
Water pump and air compressor pressure switch with 20 - 40 PSI cut-in/cut-out settings. Designed to control water pumps and air compressors requiring higher electrical ratings.  2-Pole, NEMA 1 enclosure, 1/4" NPSF internal pressure connection, diaphragm actuated, UL/CSA Listed, RoHS compliant,  NSF61-Annex G certified. Rated for 2 hp at 115 v and 3 hp at 230 v. Individially boxed. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed.
Simmons 0 Well Point Simmons 0 Well Point Anderson Metal 750065-14 Brass Compression Elbow
Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. UPC individually bagged.
Sta-Rite SR4800-01 Jet Pump Packages Simmons 0 Well Point Sta-Rite VIP4D02 Submersible Pump Control Box
4" single pipe deep well jet kit. Use with convertible jet pumps for 4" deep well applications. For applications up to 110 feet depth to water. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. U.L. Listed (Pump Accessory 344X).  Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring.
PUMP LAWN PORT 1HP STAINLESS  Sta-Rite Industries VIP4F02 Submersible Pump Control Boxes Simer 2825SS Non-Submersible Utility Pump
Powerful 1 HP fan cooled, 115 volt motor. Corrosion resistant stainless steel housing. Integral carry handle for portability. Convenient on/off switch. 1? NPT Suction and discharge. 165? total dynamic head. Pressure up to 72 psi. Garden hose adapters included.B 115v, 5.2 AMP, 72 psi maximum pressure, 830 gph max flow rate, 1 year warranty from Superior Pump. U.L. Listed (Pump Accessory 344X).  Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring. Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats, and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gallons per minute. Pressures to 80 PSI, suction lifts to 20'. Continuous duty rated, 1 HP, 115V motor. Stainless steel pump housing with excellent self-priming capability. 1" threaded suction and discharge, garden hose fitting and 6' power cord included.
Sta-Rite Industries FP5172-08 Flotec Sta-Rite 3075SS Simer - Ace In The Hole
PUMP SPRINKLER 1.5HP
Our Price: $302.24
Fiberglass reinforced thermoplastic pump housing for the highest corrosion resistance. Superior performance at depths to water of 20' or less. Ready to install 230 volt, heavy-duty motor. Self-priming after pump housing is initially filled, protects against overheating. 1-1/2 HP pumps up to 67 gallons per minute. 2 HP pumps up to 69 gallons per minute. CSA certified. Total home water pressure booster system. 3/4 HP - maximum pumping capacity to 24 GPM. Maximum additional pressure - 40 PSI. Fully automatic system increases and maintains household water pressure - enjoy better showers, cleaning, sprinkling and more. Assemble, ready to install. Includes 6' 115V power cord. 1" female NPT intake and 1" male NPT discharge pipes. CSA certified.
   
 
1