Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (NON-WELL) > TRASH / SEWAGE PUMPS
Sort By:
1
ADAPTER SWIVEL 1/2F1960X1/2FEM ADAPTER 3/4 F1960 X1/2IN MALE ADAPTER REDUCE 1/2F1960X3/4SWT
ELBOW REDUCE 1/2X3/4          ADAPTER 1/2 F1960 X3/4IN MALE ELBOW DROPEAR 1/2F1960 X1/2FIP
TEE REDUCE 3/4X1/2X1/2 F1960  TEE REDUCE 1/2X1/2X3/4 F1960  ADAPTER 1IN F1960 X3/4IN MIP
ELBOW SWIVEL 1/2F1960 X1/2FEM COUPLING 1IN F1960            ADAPTER REDUCE 1/2F1960X3/4SWT
ADAPTER 3/4IN F1960 X 1IN MIP COUPLER REDUCE 1X3/4IN F1960  ADAPTER REDUCE 3/4F1960 X1SWT
ELBOW DROPEAR 3/4F1960 X1/2FIP ADAPTER REDUCE 3/4F1960 X1 SWT World Wide Sourcing 0745 Galvanized Malleable Cross
Flat banded, right hand threads.
ADAPTER SWIVEL 3/4F1960X3/4FEM TEE REDUCE 3/4X1/2X3/4 F1960  ADAPTER 1F1960 X 1IN FEM SWT
ADAPTER 1IN F1960 X 1IN MIP   STUBOUT 1/2IN F1960 X4X8 W/EAR ADAPTER 1IN F1960 X1IN FIP
SLEEVE 1/2IN F1960            Simmons 1243 Air Valve Carriff 04010-24 Drain Sleeves
For all charging applications. For use with conventional tanks. One-piece knitted polyester covers your pipe and will keep out most sedimentation and increase water flow. Dependable filter helps prevent expensive drainage system replacement or costly repairs by screening out problem-causing sand and sediment from clogging drains.  Easy installation, more resistant to ripping and tearing in installation process and because it is cut to required length there is no waste. Eliminates the need for gravel backfill, delivering significant savings in installation time, material and labor.
Simmons 31/2OD Standard Water Well Pump Valve ADAPTER REDUCE 3/4F1960 X1FIP World Wide Sourcing 0747 Galvanized P Malleable Cross
Waterproof impregnated lower valve for regular service. Flat banded, right hand threads.
World Wide Sourcing PPG180-25 Galvanized Malleable Cross Simmons 1-11/16X5/8 Pump Cup Simmons 1244 Air Valve
Flat banded, right hand threads. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. For all charging applications. For use with conventional tanks.
TEE REDUCE 1INX1INX1/2IN F1960 Simmons 11/4X1/2 Pump Cup ELBOW DROPEAR 3/4F1960 X3/4FIP
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
PLUG 1/2IN F1960 POLYALLOY    ELBOW 1IN F1960               COUPLER 3/4IN X 1/2IN F1960
COUPLER 1/2POLY X1/2IN F1960  TEE 1IN X 1IN X 1IN F1960     TEE REDUCE 1INX1INX3/4IN F1960
SLEEVE 3/4IN F1960            Simmons 946 Extra Heavy Recessed Drive Coupling Simmons 2X11/4 Pump Cup
Reduces O.D. to allow for greater waterway. Entire coupling galvanized. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
Simmons 2X5/8 Pump Cup World Wide Sourcing PPG180-32 Galv. Pipe Fitting PLUG 3/4IN F1960 POLYALLOY
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder. Flat banded, right hand threads.
World Wide Sourcing PPG180-40 Galvanized Malleable Cross COUPLING 1/2IN F1960          ADAPTER 3/4IN F1960 X1/2IN FIP
Flat banded, right hand threads.
STUBOUT 3/4IN F1960 X4X8 W/EAR COUPLER 1/2 F1960 POLYALLOY   COUPLER 3/4POLY X3/4IN F1960
Simmons 8385L Standard Water Well Pump Valve ELBOW 1/2IN F1960 X1/2IN MIP  Simmons 3X2 Pump Cup
Waterproof impregnated lower valve for regular service. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
ADAPTER 1/2F1960 X1/2IN FEMSWT ADAPTER 1/2F1960 X1/2 MALE SWT ADAPTER 1/2IN F1960 X1/2IN MIP
Simmons 1695 Malleable Point Well Drive Cap Simmons 3X1/2 Pump Cup ADAPTER 1/2IN F1960 X3/4IN FIP
Designed for proper driving of well points. Has inside recess to prevent damage to pipe threads. Octagon-shaped for positive wrenching. Threads are standard pipe size, small vent hole in top of casting relieves pressure during driving operation. Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
ELBOW 1/2IN F1960 POLYALLOY   SLEEVE 1IN F1960              World Wide Sourcing PPG180-50 Galvanized Malleable Cross
Flat banded, right hand threads.
ADAPTER 3/4F1960 X3/4IN FEMSWT MANIFOLD 3/4 F1960 6OUT 1/2IN MANIFOLD 3/4 F1960 4OUT 1/2IN
MANIFOLD 3/4 F1960 2OUT 1/2IN TEE REDUCE 3/4X3/4X1/2 F1960  ADAPTER 1/2IN F1960 X1/2IN FIP
ADAPTER 1/2IN F1960 X1/2IN MIP MANIFOLD 3/4 F1960 3OUT 1/2IN TEE 1/2IN X 1/2IN X1/2IN F1960
COUPLER 3/4 F1960 POLYALLOY   COUPLING 3/4IN F1960          MANIFOLD 3/4 F1960 4OUT 3/4IN
ELBOW 1/2IN F1960             Simmons 31/2X21/4 Pump Cup PLUG 1IN F1960 POLYALLOY
Plastic and wax impregnated oak-tan leather cups for regular service. No.3X2 - Use with #2 Pitcher Pump for 3" Cylinder. No.31/2X21/4 - Use with #3 Pitcher Pump for 31/2" Cylinder.
ELBOW 3/4IN F1960 POLYALLOY   ELBOW 1IN F1960 POLYALLOY     TEE 3/4IN X3/4IN X3/4IN F1960
ADAPTER 3/4F1960 X3/4IN SWT   TEE 1/2IN X1/2IN X1/2IN F1960 ADAPTER 3/4IN F1960 X3/4IN MIP
ADAPTER 1 F1960 X 1IN MALE SWT Simmons 1161 Plunger Assembly Simmons 152 Double Drop Double Hole Well Seal
For No.22368A pump. Complete with rod. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
TEE 1IN X1IN X1IN F1960 POLYAL Simmons 111 Single Drop Single Hole Well Seal ADAPTER 3/4IN F1960 X3/4IN FIP
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed.
TEE 3/4IN X 3/4IN X3/4IN F1960 COUPLER 1IN F1960 POLYALLOY   ELBOW 3/4IN F1960
Simmons 136 Single Drop Single Hole Well Seal Simmons 177 Double Drop Double Hole Well Seal Water Worker HT-2B Vertical Pre-charged Well Tank
For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. For effective seal against pollution and contamination of wells from surface drainage. Many state health departments have adopted codes which require the sealing of water wells. Well is perfectly sealed by expanding the high quality of rubber packet, drawing together the top and bottom castings by tightening of belts.  Boxed. Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
Flotec FP7105-00 Vertical Pre-Charged Pressure Tank Sta-Rite Industries FP217-810 Well Pump Control Box Sta-Rite Industries FP217-811 Well Pump Control Box
Factory pre-charged to 20 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for small water systems and lower-flow applications. NSF-61 approved. Non-replaceable diaphragm. For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed.
Simmons 758 Waterlight Well Cap Sta-Rite Industries FP217-812 Well Pump Control Box Simmons 1160 Pitcher Pump
Heavy duty cast iron, 5 bolt construction, 1/4" grounding lug, 9/16" screened vent, non toxic lead free paint, 1" NPT conduit connection. Casing ID.: 6" & 6-1/4" For use with 3-wire 4" submersibles. Significantly reduces power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to install and service design. 230V. UL listed. Designed for rugged, long life service, all parts are made from close grain cast iron for optimum strength. All bolt lugs are reinforced for maximum strength. Cap can be adjusted for a wide range of handle positions. Base tapped for 1-1/4" pipe connection. If handle is left in up position and no foot valve is listed, entire pump will drain-prevents freezing.
Water Worker HT-4B Vertical Pre-charged Well Tank Simmons 0 Well Point Simmons 0 Well Point
Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed.
Flotec FP7100-01 Vertical Pre-Charged Pressure Tank Simmons 0 Well Point Simmons 0 Well Point
Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for cabins and summer homes. NSF-61 approved. Replaceable air/water separator. Equivalency rating: 15 gal. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed.
Sta-Rite SR4800-01 Jet Pump Packages Simmons 0 Well Point Flotec FP7110T-08 Vertical Pre-Charged Pressure Tank
4" single pipe deep well jet kit. Use with convertible jet pumps for 4" deep well applications. For applications up to 110 feet depth to water. Heavy duty galvanized inner pipe. Cast iron point. Stainless steel gauze and screen. Pipe size 1-1/4" diameter. Boxed. Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for household applications. NSF-61 approved. Replaceable air/water separator.
Water Worker HT-14HB Horizontal Pre-Charged Well Tank Sta-Rite VIP4D02 Submersible Pump Control Box Sta-Rite Industries VIP4F02 Submersible Pump Control Boxes
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. U.L. Listed (Pump Accessory 344X).  Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring. U.L. Listed (Pump Accessory 344X).  Significantly reduce power consumption. Saving electrical usage translates directly to cooler motor temperatures, resulting in longer motor life. Contains starting components in an easy-to repair design. Open design permits easy wiring.
Flotec FP7110 Vertical Pre-Charged Pressure Tank Water Worker HT-20HB Horizontal Pre-Charged Well Tank Water Worker HT-20B Vertical Pre-charged Well Tank
Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for household applications. NSF-61 approved. Replaceable air/water separator. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
Superior Pump 93501 Continuous Duty Sewage Pump Wayne RPP50 Sewage Pumps Flotec FP7230-08 Vertical Pressure Tank
1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, rugged cast iron construction, 10' grounded waterproof power cord, pumps up to 80 gallons per minute, 4800 gallons per hour, bottom intake provides for clog resistant suction, clog-free metal vortex impeller, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 2" solids, 2" female iron pipe discharge thread. Cast aluminum, non-clogging vortex impeller. One year warranty from Superior Pump Co. 1/2 HP cast iron submersible sewage pump. Max flow rate is 5700 GPH at 0 ft. Durable, cast iron submersible sewage pump. 2 in. NPT discharge capable of handling up to 2 in. solids. Ideal for basement or below grade installations. Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Standard air volume control tap. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Piping size 1-1/4".
Flotec FP7210-00 Horizontal Pressure Tank Flotec FP7235-08 Vertical Pressure Tank Flotec FP7120 Vertical Pre-Charged Pressure Tank
Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Length 36-1/2", piping size 3/4". Tank mounting bracket, pump hook-up kit, and air volume control included. Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Standard air volume control tap. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Piping size 1-1/4". Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Large capacity - ideal for high demand water usage. NSF-61 approved. Replaceable air/water separator.
Sta-Rite FPOS1800LTS Sink Pump System Water Worker HT-32B Vertical Pre-charged Well Tank Wayne CSE50TE Sewage Pumps
Under-sink basin system with 1/3 HP sump pump - pumps up to 2880 GPH. Ideal for pumping washing machine, wet bar and air conditioning drainage without an in-ground basin. Heavy-duty 6 gallon structural foam drainage tank. Easy installation - eliminates need for expensive plumbing renovation. CSA certified. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Designed for residential and light commercial sewage applications. Ideal for basement or below grade installations. Maximum pumping capacity of 7680 GPH. Cast Iron motor and pump housing. Automatic operation with replaceable piggyback tether float switch. 2" discharge and capable of handling 2" NPT solids. Designed for 18" diameter or larger basins.
Flotec FP7240-00 Vertical Pressure Tank Tsurumi HS Agitator Trash Pump Superior Pump 93015 Pre-Plumbed Sewage Pump Kit
Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Standard air volume control tap. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Piping size 1-1/4". Handles up to 20 percent of sand, solids, leaves, and debris without clogging. Semi-vortex urethane rubber impeller with shaft mounted agitator suspends solids and allows for pumping of sand and stringy material. Continuous duty, air filled copper wound motor with class B insulation. Built-in thermal protection prevents motor failure due to overloading, accidental run-dry, and single phasing in three phase units. Double inside mechanical seals with silicon carbide faces (both top and bottom) run in an oil filled chamber. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hours provide for extended operational life. 2 year commercial warranty. Pump: 1/2 hp sewage pump (93501), cast iron, tethered, 2" discharge, cast aluminum vortex impeller, 7.6 amp, 10' cord. Includes: 18" x 30" basin, 18" cover, check valve and snap-in plug. Basin features: Structural foam construction, air tight molded reusable pvc, corrosion resistant, 4" inlet hub, 2" discharge and vent, 30 gal capacity, built in torque stops. Check valve features: heavy duty rubber boots, stainless steel clamps, full flow design, 2" connections. Snap-in hub features: heavy duty stainless steel clamp, water & vapor tight seal, fits 4" DWV schedule 40/80 pipe. .
Sta-Rite FPSE3601A-04 Flotec Sta-Rite Industries E75STVT Sewage Pumps CON-AIRE PUMP TANK 50GAL
Automatic submersible sewage pump made from rugged cast-iron to maximize pump life. Heavy-duty motor with overload protection provides safe operation. Maximum pumping capacity to 9000 GPH. 2" NPT discharge and 10' power cord.  Requires 18" minimum diameter sewage basin. CSA certified. 115V, 10' cord, CSA and CUS listed, 13500 gph capacity, energy-efficient PSC motor, rust-proof impeller, 2" NPT discharge pipe, 2" maximum solid handling. Pro-Source Pressure Tank, Vertical, Series: PS50-T50, 50 gal Capacity, 20 in Diameter, 32-1/2 in Height, 1-1/4 in Connection, FNPT Connection, Heavy Gauge Steel, Electrostatically Applied, Baked-On Polyester Paint, 40 psi, CSA/ANSI 61 Certified, NSF Approved, For Use in Water Systems
Water Worker HT-44B Vertical Pre-charged Well Tank Water Worker HT-86B Vertical Pre-charged Well Tank Thetford 38700 Toilet
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. ALL COMPONENTS SOLD SEPARATELY. Rear discharge toilet and macerating pump system allows for an additional bathroom in a location with no under-the-floor plumbing. Macerator Pump Specifications 18.5" (470 mm) W x 11.5" (290 mm) h x 7" (175 mm), GPM: Max 60 (227 liters), .8 HP, 8A at 120V, 600W, 22 lbs (10 kg). Pump:980-4287. Round Bowl: 980-4303. Elongated Bowl: 980-4295. Tank: 980-4311.
Water Worker HT-119B Vertical Pre-charged Well Tank ENGINE SEMI TRASH PUMP 4HP    Tsurumi EPT3 Portable Trash Pump
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. 4RLAG-2H Aluminum Water Transfer Pump. Powered by Commercial grade Honda GX120 engine. Durable cast iron semi-open style impeller. Lightweight aluminum casing includes HD roll frame. Self-priming to 25' of suction lift. Built-in check valve. EPA certified. 2" MNPT inlet and discharge.Max head 59 ft. Max flow 143 GPM. Compact, reliable design. Heavy-duty Honda gas engine with oil sensor. High chrome impeller, cast iron volute casing, and stainless steel wear plate. Silicon carbide mechanical seal. Galvanized steel hose couplings provide increased durability and decreased maintenance. Durable rolled-steel frame provides pump/engine with maximum protection, ease of handling or transport, and safe operation. Pump/engine set mounted to cage frame on rubber vibration cushions to buffer stress and wear. 2 year commercial warranty.
Tsurumi EPT3 Portable Trash Trash Pump
Compact, reliable design. Heavy-duty Honda gas engine with oil sensor. High chrome impeller, cast iron volute casing, and stainless steel wear plate. Silicon carbide mechanical seal. Galvanized steel hose couplings provide increased durability and decreased maintenance. Durable rolled-steel frame provides pump/engine with maximum protection, ease of handling or transport, and safe operation. Pump/engine set mounted to cage frame on rubber vibration cushions to buffer stress and wear. 2 year commercial warranty. Rental.
   
 
1