Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (NON-WELL) > SUMP PUMP PARTS & ACCESSORIES
Sort By:
1
Flair-It 16841 Flair-It Pex Polybutylene Adapter Flair-It 16842 Flair-It Flair-It 16860 Tube Cap
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Used for capping off PEX fittings. Bar coded.
Worldwide Sourcing 11A-1/4G Galvanized Pipe Tee World Wide Sourcing 11A-3/8G Galvanized Malleable Tee Worldwide Sourcing 11A-1/2G Galvanized Pipe Tee
Flat banded, right hand threads. Flat banded, right hand threads. Flat banded, right hand threads.
ADAPTER SWIVEL 1/2F1960X1/2FEM Flair-It 16859 Tube Cap Flair-It 16855 Flair-It Pex Polybutylene Coupling
Used for capping off PEX fittings. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16872 Flair-It Pex Polybutylene Adapter 3/4Comp x 3/4 MPT BSP Flair-It 16870 Flair-It Flair-It 16812 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16800 Flair-It Worldwide Sourcing 11A-3/4G Galvanized Pipe Tee Flair-It 26790 Flair-It Pex Polybutylene Adapter
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Flat banded, right hand threads. For hot and cold water. Inserts into Polybutylene tubing allowing you to use PEX fittings with Polybutylene tubing.  3 Per Bag.
Flair-It 16799 Flair-It ADAPTER 3/4 F1960 X1/2IN MALE Flair-It 16840 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
World Wide Sourcing 11A-1/8G Galvanizedanize Malleable Tee Flair-It 16862 Tube Plug Flair-It 16810 Flair-It
Flat banded, right hand threads. Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16852 Flair-It Flair-It 16868 Flair-It Pex Polybutylene Adapter Flair-It 16815 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16853 Flair-It Flair-It 16847 Flair-It Flair-It 16863 Tube Plug
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used for inserting a plug into the end of a pipe. Bar coded.
Flair-It 16803 Flair-It Pex Polybutylene 90 Degree Elbow ADAPTER REDUCE 1/2F1960X3/4SWT Flair-It 16858 Flair-It Pex Polybutylene Adapter
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
ELBOW REDUCE 1/2X3/4          ADAPTER 1/2 F1960 X3/4IN MALE Flair-It 16850 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16848 Flair-It Pex Polybutylene Adapter Flair-It 16873 Swivel Nut Coupling ELBOW DROPEAR 1/2F1960 X1/2FIP
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded.
TEE REDUCE 3/4X1/2X1/2 F1960  Flair-It 16802 Flair-It TEE REDUCE 1/2X1/2X3/4 F1960
For hot and cold water. 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16820 Flair-It Flair-It 16874 Swivel Nut Coupling Flair-It 16861 Tube Cap
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. Used for capping off PEX fittings. Bar coded.
Flair-It 16845 Flair-It Pex Polybutylene Coupling Flair-It 16816 Flair-It Pex Polybutylene 90 Degree Swivel Elbow ADAPTER 1IN F1960 X3/4IN MIP
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
ELBOW SWIVEL 1/2F1960 X1/2FEM COUPLING 1IN F1960            ADAPTER REDUCE 1/2F1960X3/4SWT
ADAPTER 3/4IN F1960 X 1IN MIP COUPLER REDUCE 1X3/4IN F1960  ADAPTER REDUCE 3/4F1960 X1SWT
Flair-It 16846 Flair-It Pex Polybutylene Coupling ELBOW DROPEAR 3/4F1960 X1/2FIP ADAPTER REDUCE 3/4F1960 X1 SWT
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16831 Flair-It Pex Polybutylene Tee 3/8 x 3/8 x 3/8 Comp ADAPTER SWIVEL 3/4F1960X3/4FEM Worldwide Sourcing 11A-1G Galvanized Pipe Tee
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Flat banded, right hand threads.
TEE REDUCE 3/4X1/2X3/4 F1960  Flair-It 16864 Tube Plug Flair-It 16844 Transition Coupling
Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded.
Flair-It 16809 Flair-It ADAPTER 1F1960 X 1IN FEM SWT  Flair-It 16817 Flair-It Pex Polybutylene 90 Degree Swivel Elbow
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16865 Swivel Tube Adapter ADAPTER 1IN F1960 X 1IN MIP   Flair-It 16806 Flair-It Pex Polybutylene 90 Degree Elbow
Toilet connection to PEX connection. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It? 16871 Tube to Pipe Adapter STUBOUT 1/2IN F1960 X4X8 W/EAR ADAPTER 1IN F1960 X1IN FIP
Used for connecting icemaker fittings to PEX or Polybutylene tubing. Bar coded.
SLEEVE 1/2IN F1960            Flair-It 16826 Flair-It Pex Polybutylene Tee3/4 x 3/4 x 1/2 Comp Flair-It 16805 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
ADAPTER REDUCE 3/4F1960 X1FIP Flair-It 16869 Swivel Tube Adapter Flair-It 16834 Flair-It Pex Polybutylene 1/2 x 1/2 x 1/8 In
Toilet connection to PEX connection. Bar coded. Used to connect icemaker fittings to PEX or Polybutylene tubing. Bar coded.
Flair-It 16343 Transition Coupling Flair-It 16827 Flair-It Pex Polybutylene Tee 3/4 x 3/4 x 3/4 Comp Flair-It 16825 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 3/4 Comp
Couplings fit copper, PEX, Polybutylene or CPVC. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
TEE REDUCE 1INX1INX1/2IN F1960 ELBOW DROPEAR 3/4F1960 X3/4FIP PLUG 1/2IN F1960 POLYALLOY
Flair-It 16824 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 1/2 Comp Flair-It 16830 Flair-It World Wide Sourcing 11A-1 1/4G Galv. Pipe Fitting
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Flat banded, right hand threads.
ELBOW 1IN F1960               COUPLER 3/4IN X 1/2IN F1960   COUPLER 1/2POLY X1/2IN F1960
TEE 1IN X 1IN X 1IN F1960     TEE REDUCE 1INX1INX3/4IN F1960 SLEEVE 3/4IN F1960
World Wide Sourcing 11A-1 1/2G Galv. Pipe Fitting Flair-It 16347 Transition Coupling PLUG 3/4IN F1960 POLYALLOY
Flat banded, right hand threads. Couplings fit copper, PEX, Polybutylene or CPVC.
PEDESTAL SWITCH REPLACEMENT   COUPLING 1/2IN F1960          ADAPTER 3/4IN F1960 X1/2IN FIP
Universal design replaces most external pedestal pump float swithes. Durable metal switch arm. Includes wire leads and mounting hardwaare. 120V, 15 amp.
STUBOUT 3/4IN F1960 X4X8 W/EAR COUPLER 1/2 F1960 POLYALLOY   COUPLER 3/4POLY X3/4IN F1960
ELBOW 1/2IN F1960 X1/2IN MIP  ADAPTER 1/2F1960 X1/2IN FEMSWT Worldwide Sourcing 11A-2G Galvanized Pipe Tee
Flat banded, right hand threads.
ADAPTER 1/2F1960 X1/2 MALE SWT ADAPTER 1/2IN F1960 X1/2IN MIP ADAPTER 1/2IN F1960 X3/4IN FIP
ELBOW 1/2IN F1960 POLYALLOY   SLEEVE 1IN F1960              ADAPTER 3/4F1960 X3/4IN FEMSWT
MANIFOLD 3/4 F1960 6OUT 1/2IN MANIFOLD 3/4 F1960 4OUT 1/2IN MANIFOLD 3/4 F1960 2OUT 1/2IN
TEE REDUCE 3/4X3/4X1/2 F1960  ADAPTER 1/2IN F1960 X1/2IN FIP ADAPTER 1/2IN F1960 X1/2IN MIP
MANIFOLD 3/4 F1960 3OUT 1/2IN TEE 1/2IN X 1/2IN X1/2IN F1960 COUPLER 3/4 F1960 POLYALLOY
Hancor 1537ADH Sump Pump Well Lid COUPLING 3/4IN F1960          MANIFOLD 3/4 F1960 4OUT 3/4IN
High density polyethylene constructed. Meets ASTM D3350. CSA approved.
ELBOW 1/2IN F1960             PLUG 1IN F1960 POLYALLOY      ELBOW 3/4IN F1960 POLYALLOY
ELBOW 1IN F1960 POLYALLOY     TEE 3/4IN X3/4IN X3/4IN F1960 ADAPTER 3/4F1960 X3/4IN SWT
TEE 1/2IN X1/2IN X1/2IN F1960 ADAPTER 3/4IN F1960 X3/4IN MIP ADAPTER 1 F1960 X 1IN MALE SWT
TEE 1IN X1IN X1IN F1960 POLYAL ADAPTER 3/4IN F1960 X3/4IN FIP Wayne 56395 Pump Switch Kit
For Models: SSF33, SSF50, CDU790 and CDU800.
TEE 3/4IN X 3/4IN X3/4IN F1960 Superior Pump 92000 Replacement Tethered Float Switch COUPLER 1IN F1960 POLYALLOY
Non-mercury tethered float switch, 10' cord with piggyback plug, flexible wire construction. Run current:13 amps. Start current: 90 amps. Liquid temperature: 140 degrees F.
B and K 510-610BC Galvanized Pipe Fittings ELBOW 3/4IN F1960             Hancor 1524ADH Sump Pump Well
Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. High density polyethylene construction. Includes three pre-formed inlet collars sized to fit 4" corrugated polyethylene drainage lines. Molded side panel is designed lines. Molded side panel is designed to accept outside basement perimeter line at any elevation along well wall. Meets ASTM D3350. 18" Dia. x 24" Length. CSA approved. Lid not included.
Superior Pump 92010 Replacement Vertical Float Switch B and K 510-611BC Galvanized Pipe Fittings Water Worker HT-2B Vertical Pre-charged Well Tank
10' power cord, flexible wire construction, pump bracket sold separately. Run current: 13 amps. Start current 90 amps. Liquid temperature 140 degrees F. Meets the following specifications: Material: ANSI/ASTM A-197, Dimensions: ANSI/ASME B.16.3, B16.14, B16.39, Threads: ANSI B1.20.1. Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
Sta-Rite FP18-15BD-P2 Tethered Float Switch Flotec FP7105-00 Vertical Pre-Charged Pressure Tank Water Worker HT-4B Vertical Pre-charged Well Tank
Replaces most standard float switches. Ideal for 14" diameter or larger sump basins. Piggy-back style plug with 10' cord. Mounting strap included. Factory pre-charged to 20 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for small water systems and lower-flow applications. NSF-61 approved. Non-replaceable diaphragm. Maximum 100 psi pressure rating for residential use. Heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
Flotec FP7100-01 Vertical Pre-Charged Pressure Tank Superior Pump 92130 Wireless Remote Water Detector Flotec FP7110T-08 Vertical Pre-Charged Pressure Tank
Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for cabins and summer homes. NSF-61 approved. Replaceable air/water separator. Equivalency rating: 15 gal. Pump remote monitor with early warning alerts to help you protect your property and minimize repair costs. Set your smartphone, tablet or computer to monitor for water leaks and high or low temperature/humidity levels to prevent frozen pipes or mold growth. Water damage can be caused by frozen or broken pipes, rusty water heaters, leaky roofs, basements and foundations from snow, rain or floods, faulty plumbing installation, sump pump overflow, leaky dishwasher hoses and washing machine overflow. Connect the included gateway to your existing network router, and register your remote monitor to activate remote monitoring. Receive text and email alerts. Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for household applications. NSF-61 approved. Replaceable air/water separator.
Water Worker HT-14HB Horizontal Pre-Charged Well Tank Flotec FP7110 Vertical Pre-Charged Pressure Tank Water Worker HT-20HB Horizontal Pre-Charged Well Tank
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Convenient size - ideal for household applications. NSF-61 approved. Replaceable air/water separator. Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
Water Worker HT-20B Vertical Pre-charged Well Tank Pacer P-58-0206 Quick Connect PUMP SHALLOW WELL CAST 1/2HP
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. Includes polypropylene Quick-Connect fittings, 20' PVC reinforced suction hose, 25' PVC discharge hose, and HDPE suction strainer. Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. 1-1/4 NPT suction, 1" discharge/ drive port, 67 psi maximum pressure, 12.5 gpm flow rate, 1 year warranty from Superior Pump.
Flotec FP7230-08 Vertical Pressure Tank Flotec FP7210-00 Horizontal Pressure Tank Flotec FP7235-08 Vertical Pressure Tank
Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Standard air volume control tap. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Piping size 1-1/4". Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Length 36-1/2", piping size 3/4". Tank mounting bracket, pump hook-up kit, and air volume control included. Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Standard air volume control tap. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Piping size 1-1/4".
BATTERY 75AMP SEALD LEAD ACID Flotec FP7120 Vertical Pre-Charged Pressure Tank PUMP CONVERTIBL WELL CAST1/2HP
Sealed AGM (absorbent glass mat) lead acid design. Spill proof design. Longer run times. Longer service life. Up to 5 times faster charge compared to flooded battery. No maintenance required. Recommend for use with backup sump pump systems. Will pump approximately 5900 gallons of water per charge*. Battery dimensions: 10-1/4"L x 6-1/2"W x 9-1/2"H Factory pre-charged to 40 PSI for efficiency - extends pump life by providing more water between pump cycles compared to standard tanks. Heavy-gauge steel construction for maximum durability and extended life. Precision press fit design - minimizes gaps between components, reducing corrosion and seam leaks. Large capacity - ideal for high demand water usage. NSF-61 approved. Replaceable air/water separator. Rugged cast iron pump body for durability, Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications.  1-1/4" NPT suction, 58 psi maximum pressure, 9.9 gpm mas flow rate, 1" discharge/ drive port.Deep well conversion assembly included. 6.4/3.2 amps. 1 year warranty from Superior Pump.
Bur-Cam Pumps 506321 Convertible Jet Pumps PUMP JET SHALLOW WELL 3/4HP   Sta-Rite Industries FP4212-08 Flotec
Cast iron convertible jet pump. SW operation 0-25' with ejector screwed on pump body. DW operation 0-80' with 2 pipes and ejector down in the well. High performance noryl impeller, industrial motor totally enclosed, fan cooled. full time connected run capacitor, to eliminate starting wear vs regular motor. thermal and overload protection, built for a continuous use. 1/2 hp TEFC motor, 115/230v. maximum pressure of 85 psi. capacity at 20 psi: 650 gph/ 5', 565 gph/10', 485 gph/15', 365 gph/20', 245 gph/25', 575 gph/30', 465 gph/40', 365 gph/50,' 170 gph/80,'  1" NPT suction. 1" NPT discharge. 38 lbs (17.27kg) 3/4 HP dual voltage motor (115/230v).  Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate.  Pre-mounted, fully adjustable pressure switch.For shallow well applications up to 25' depth. 7.8/3.9 amps, 1-1/4 NPT suction, 1" discharge/dirive port, 20/40 pressure switch, 74 psi max pressure, 13.75 gpm max flow rate. 1 year warranty from superior Pump. Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
Sta-Rite Industries FP4012-10 Flotec Sta-Rite Industries FP4022-08 Flotec Sta-Rite FSNCH-L Sta-Rite
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve. Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime. Dust-proof cover to protect all electrical components from dust and insects. Motor features stainless steel shaft, heavy-duty ball bearings, balanced rotor and insulated motor windings. Pre-set, pre-wired pressure switch for automatic operation when used with water system tank. Top or side discharge-simplifies installation. 1-1/4" NPT suction and 3/4" NPT discharge. Dual voltage 115/230V; factory set at 230V. Wiring diagrams are permanently affixed on each motor for easy field change to 115 volt. Pressure switch setting 30-50. CSA certified.
Water Worker HT-32B Vertical Pre-charged Well Tank Wayne Pumps CWS50 Deep Well Jet Pumps Sta-Rite Industries FP4222-08 Flotec
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. 1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately). Rugged cast iron construction. Superior performance at depths to water of 100' or less. 1/2 HP pumps up to7.9 GPM. 3/4 HP pumps up to 11.9 GPM. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP preset at 230V. Prewired pressure switch preset for 30/50 PSI operation. Self-priming after pump housing is initially filled. Built-in pressure regulator. CSA certified. Jet kit sold separately.
Sta-Rite Industries FP4032 Flotec PUMP JET CONV W/EJECT KIT 1HP Wayne Pumps CWS75 Deep Well Jet Pumps
Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM.  Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified. 1 HP dual voltage motor (115/230v). Rugged cast iron pump body for durability. Tough thermoplastic impeller. Glass filled thermoplastic diffuser. Cast iron seal plate. Pre-mounted, fully adjustable pressure switch. For shallow well applications up to 25' depth. Can be used in deep well applications. 10/5 amps, 115/230 volt, 1-1/4" NPT suction, 71 psi max pressure, 13.2 gpm max flow rate. 1 year warranty from Superior Pump. 1/2 HP and 3/4 HP cast iron convertible jet well pump. Assembled in the US with foreign and domestic parts. 3/4 in. NPT discharge with 1 1/4 in. NPT suction and 1 in. drive. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Pressure switch is pre-set at 30-50 PSI for automatic operation. Max flow rate of 408 GPH at 0 ft. (50 PSI/CWS50) and 462 GPH at 0 ft. (50 PSI/CWS75). Durable cast iron volute with dedicated priming port for volute filling. For wells 0 ft. - 90 ft. in depth. Jet assembly required (sold separately).
Flotec FP7240-00 Vertical Pressure Tank Franklin Electric RJC-75 Red Lion Sta-Rite FSNDH Sta-Rite
Replaces any standard galvanized, glass-lined or epoxy-lined tank. Precision press fit design minimizes gaps between components, reducing the possibility of corrosion and seam leaks. Heavy gauge, all steel construction. Powder epoxy interior coating electrostatically applied. Tough polyester exterior paint. Standard air volume control tap. Excellent corrosion resistant tank for home water systems applications such as retention tank, holding tank and pressure tank. The epoxy interior coating is resistant to corrosion and is FDA listed. Piping size 1-1/4". Ideal for use in shallow well (less than 25') and deep well (25' to 90') applications.  For heavy duty applications.  115/230 volt heavy-duty motor with voltage selector for simple connection to existing power source.  Produces up to 71 PSI with automatic shut-off.  Cast iron pump housing.  Includes factor pre-wire 30/50 pressure switch.  18 GPM. Close-grained cast iron body and base, specially treated for corrosion resistance. Provides strong performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water. Drain port provided for easy winterizing. Pump primes faster and handles more air with a multi-port, precision-molded, reinforced polypropylene diffuser. Motor windings feature insulation materials that protect against excessive moisture and contaminants. Heavy-duty ball bearings are sealed, permanently lubricated, and tested to ensure extended life and smooth quiet operation. Built-in jet features a high strength poly-carbonate nozzle and venturi for maximum resistance to corrosion and abrasion. Clean out plug provided for ease of service. Noryl impeller is precision molded for perfect balance, and is ultra smooth for highest performance and efficiency. Mechanical shaft seal is precision lapped and made of highly polished carbon-ceramic, stainless steel construction, with an internal design for continuous water lubrication. Balanced rotor is die cast under high pressures for uniform performance and greater efficiency. Pump and motor shaft are stainless steel for maximum corrosion resistance, with a one-piece threaded shaft for positive drive and alignment. Includes a dustproof cover to protect all electrical components from dirt, dusts, and insects. Pressure switch with adjustable cut-in and fixed differential (20 PSI). 115/230V
Franklin Electric RL12G05-3W2V Red Lion Sta-Rite Industries SLC-L Sta-Rite Pro Jet Franklin Electric RL12G05-2W1V Red Lion
4" submersible deep well pump. Powered by a 3-wire, 230 volt industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box. The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models. The ProJet SL convertible jets utilize easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages. Close-grained cast iron construction. Reinforced polypropylene diffuser with brass wear ring. One-piece threaded stainless steel shaft. High quality pressure switch with adjustable cut-in pressure settings. CSA certified. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Franklin Electric RL12G05-2W2V Red Lion Franklin Electric RJC-50 Red Lion CON-AIRE PUMP TANK 50GAL
4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. Ideal for use in shallow well (less than 25') and deep well (25' to 90') applications. Cast iron pump housing for heavy duty applications. 115/230 volt heavy-duty motor with voltage selector for simple connection to existing power source. Includes factory pre-wired 30/50 pressure switch that produces up to 76 PSI with automatic shut-off. 11 GPM. Pro-Source Pressure Tank, Vertical, Series: PS50-T50, 50 gal Capacity, 20 in Diameter, 32-1/2 in Height, 1-1/4 in Connection, FNPT Connection, Heavy Gauge Steel, Electrostatically Applied, Baked-On Polyester Paint, 40 psi, CSA/ANSI 61 Certified, NSF Approved, For Use in Water Systems
Water Worker HT-44B Vertical Pre-charged Well Tank Sta-Rite Industries FP2211 Flotec Sta-Rite Industries FP2212 Flotec
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified.
Wayne SWS50-8.5FX Pump And Precharged Tank System Franklin Electric RL12G07-2W2V Red Lion Franklin Electric RL12G07-3W2V Red Lion
1/2 HP cast iron shallow well jet pump precharged tank system (includes SWS50). Assembled in the US with foreign and domestic parts. 3/4 in NPT discharge with 1 1/4 in. suction. Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V). Max flow rate is 420 GPH at 0 ft. (50 PSI). Durable cast iron volute with dedicated priming port. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 4" submersible deep well pump. Powered by a 3-wire, 230 volt industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion. 1/2, 3/4 and 1 hp models come with a control box.
Water Worker HT-86B Vertical Pre-charged Well Tank Sta-Rite SLE-1 Sta-Rite Pro Jet Franklin Electric RL12G10-2W2V Red Lion
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty. The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 - 1 HP models. The ProJet SL convertible jets utilize easier priming and better range of performance from a complete line of shallow well, 4" double pipe, 2" and 3" single pipe jet packages. Close-grained cast iron construction. Reinforced polypropylene diffuser with brass wear ring. One-piece threaded stainless steel shaft. High quality pressure switch with adjustable cut-in pressure settings. CSA certified. 4" submersible deep well pump. Powered by a 2-wire,  industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4" NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow performance without the risk of corrosion.
Sta-Rite Industries FP2232 Flotec Sta-Rite Industries FP2222 Flotec Sta-Rite Industries MSE Sta-Rite
For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. For residential water systems, or agricultural applications. For 4" or larger inside diameter wells. High performance pumps - proven floating stack impeller design for sand resistance and reduced sand locking. Durable construction - stainless steel pump and motor housing. CSA certified. The MS series vertical jet pumps are the industry standard deep well jet pumps for over-the-well "bolt-on" installations. The MS series jet pumps include the pre-plumbed external automatic regulator, pressure gauge, pressure switch, and a complete line of casing adapters to drive the 4" double pipe or 2" and 3" single pipe jet packages. Rugged cast iron body, stainless steel pump and motor shaft, and close-grained cast iron diffuser.
Water Worker HT-119B Vertical Pre-charged Well Tank
Maximum 100 psi pressure rating for residential use, heavy diaphragm designed for extended life, locking ring, high-grade polypropylene liner, durable steel base. NSF Standard 61 listed meets FDA requirements for potable water. Maximum operating temperature: 200?F.  Factory pre-charged to 38psi.  Made in the USA.  5 year limited warranty.
   
 
1