Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > GAS LEAK DETECTORS
Choose a sub category:
BRASS COMPRESSION SLEEVES BRASS COMPRESSION UNIONS BRASS COMPRESSION INSERTS
BRASS COMPRESSION CAPS BRASS COMPRESSION NUTS BRASS COMPRESSION ADAPTERS
BRASS COMP MALE CONNECTORS BRASS COMP FEMALE CONNECTORS BRASS COMPRESSION TEES
BRASS COMPRESSION ELBOWS
Sort By:
1
Anderson Metal 730561-05 Brass Compression Fitting Anderson Metal 730561-08 Brass Compression Fitting Anderson Metal 730561-04 Brass Compression Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Elkhart Products 32700 Copper Fittings Genova Products 80415 ABS-DWV Male Adapter Genova Products 83615 ABS-DWV 45 Degree Sanitary Elbow
EPC Pipe Tee, 1/2 in Nominal Size, Copper, Wrot Copper Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82815 ABS-DWV 90 Degree Sanitary Elbow Genova Products 82715 ABS-DWV 45 Degree Street Elbow Genova Products 80715 ABS-DWV90 Degree Vent Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 83620 ABS-DWV 45 Degree Sanitary Elbow Genova Products 80315 ABS-DWV Female Adapter Genova Products 82720 ABS-DWV 45 Degree Street Elbow Sched 40
Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82820 ABS-DWV 90 Degree Sanitary Elbow Genova 82311 Abs-DWV Fitting Flair-It 16841 Flair-It Pex Polybutylene Adapter
Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Anderson Metal 730561-10 Brass Compression Fitting Danco 80787 Round Hose Washer Genova Products 82315 ABS-DWV Trap Adapter
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. 5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick. Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82916 ABS-DWV 90 Degree Street Elbow Flair-It 16842 Flair-It Anderson 756116-02 Street Pipe Elbow
Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Genova 80915 ABS-DWV Fitting Danco 80070 Hose Washer With Screen Genova Products 82215 ABS-DWV Female Trap Adapter
Used to change direction in piping in drain-waste-vent applications. Sometimes called an sixth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. 5/8" hose size: 9/16"ID x 1"OD. Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Flair-It 16860 Tube Cap Anderson 03610 Pipe Reducing Hex Bushing Genova Products 82211 ABS-DWV Female Trap Adapter
Used for capping off PEX fittings. Bar coded. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/2 X 1-1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 80820 ABS-DWV 22-1/2 Degree Elbow Genova 80320 Abs-DWV Fitting Genova 80420 Abs-DWV Fitting
Used to change direction in piping in drain-waste-vent applications. Sometimes called a sixteenth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 82926 ABS-DWV 90 Degree Street Elbow Anderson Metal 730561-06 Brass Compression Adapter Insert Flair-It 16859 Tube Cap
Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Used for capping off PEX fittings. Bar coded.
Anderson Metals 50868-0402 Tube Adapter Genova Products 83815 ABS-DWV 90 Deg Long Sweep Elbow Flair-It 16855 Flair-It Pex Polybutylene Coupling
UPC individually bagged. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Elkhart Products 32768 Copper Fittings Genova Products 80720 ABS-DWV 90 Degree Vent Elbow Flair-It 16872 Flair-It Pex Polybutylene Adapter 3/4Comp x 3/4 MPT BSP
EPC Pipe Tee, 3/4 in Nominal Size, Copper, Wrot Copper Used to change direction in the dry portion of vent piping where water flow is not a consideration. Sometimes called a short turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16870 Flair-It Flair-It 16812 Flair-It Flair-It 16800 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Anderson Metal 750068-0602 Brass Fitting Worldwide Sourcing PMB-455-3L Lint Traps ADAPTER SWIVEL 1/2F1960X1/2FEM
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. 2--piece.
Flair-It 26790 Flair-It Pex Polybutylene Adapter Flair-It 16799 Flair-It Flair-It 16840 Flair-It
For hot and cold water. Inserts into Polybutylene tubing allowing you to use PEX fittings with Polybutylene tubing.  3 Per Bag. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Plumb Pak PP850-15 Filter Hose Washer With Screen Anderson 756116-04 Street Pipe Elbow Elkhart Products 32774 Copper Fittings
Plumb Pak Filter Hose Washer, 3-3/4 in Height X 1-7/8 in Width One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. EPC Pipe Reducing Tee, 3/4 x 3/4 x 1/2 in Nominal Size, Copper, Wrot Copper
Harvey's 039300 Gas Leak Detectors Genova Products 83820 ABS-DWV 90 Degree Long Sweep Elbow Plumb Pak PP820-46 Lint Trap With Twist Tie
Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to +160 degrees Fahrenheit. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin. Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Plumb Pak Lint Trap, 10 in Height X 7 in Width, Nylon, Plastic Mesh
Elkhart 32794 Copper Fitting Flair-It 16862 Tube Plug Flair-It 16810 Flair-It
EPC Pipe Reducing Tee, 3/4 x 1/2 x 1/2 in Nominal Size, Copper, Wrot Copper Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16852 Flair-It Flair-It 16868 Flair-It Pex Polybutylene Adapter Flair-It 16815 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Elkhart 32668 Copper Fitting Flair-It 16853 Flair-It Flair-It 16847 Flair-It
EPC Pipe Tee, 3/8 in Nominal Size, Copper, Wrot Copper For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16863 Tube Plug Flair-It 16803 Flair-It Pex Polybutylene 90 Degree Elbow Flair-It 16858 Flair-It Pex Polybutylene Adapter
Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Anderson Metal 750068-0406 Brass Fittings Flair-It 16850 Flair-It Flair-It 16848 Flair-It Pex Polybutylene Adapter
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16873 Swivel Nut Coupling Elkhart 32790 Copper Fitting Flair-It 16802 Flair-It
For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. EPC Pipe Reducing Tee, 3/4 x 1/2 x 3/4 in Nominal Size, Copper, Wrot Copper For hot and cold water. 1/2" fits PEX or Polybutylene tubing only. Bar coded.
ADAPTER 3/4 F1960 X1/2IN MALE Danco 36333B Round Hose Washer Flair-It 16820 Flair-It
5/8" washer size, 3/4" I.D., 1" O.D., 1/8" thick. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16874 Swivel Nut Coupling Flair-It 16861 Tube Cap Genova Products 80330 ABS-DWV Female Adapter
For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. Used for capping off PEX fittings. Bar coded. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Flair-It 16845 Flair-It Pex Polybutylene Coupling Flair-It 16816 Flair-It Pex Polybutylene 90 Degree Swivel Elbow Genova Products 82830 ABS-DWV 90 Degree Sanitary Elbow
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
ADAPTER REDUCE 1/2F1960X3/4SWT Anderson 53622-08 Hex Pipe Nipple Elkhart 32640 Copper Fitting
Anderson Hex Pipe Nipple, Series: 53622-08, 1/2 in Nominal, MPT End, Nylon, For Plastic Tubing or Rubber Hose EPC Pipe Tee, 1/4 in Nominal Size, Copper, Wrot Copper
Flair-It 16846 Flair-It Pex Polybutylene Coupling Plumb Pak PP2082044 Lint Trap With Twist Tie Genova Products 82936 ABS-DWV 90 Degree Sanitary Straight Elbow
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. With twist tie. Used to change direction in piping in drain-waste-vent applications. Sometimes called a street quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
ELBOW REDUCE 1/2X3/4          Plumb Pak PP820-44 Lint Trap With Twist Tie ADAPTER 1/2 F1960 X3/4IN MALE
With twist tie.
Flair-It 16831 Flair-It Pex Polybutylene Tee 3/8 x 3/8 x 3/8 Comp ELBOW DROPEAR 1/2F1960 X1/2FIP Anderson Metal 750068-0408 Brass Fittings
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines.
Flair-It 16864 Tube Plug Flair-It 16844 Transition Coupling Flair-It 16809 Flair-It
Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
TEE REDUCE 3/4X1/2X1/2 F1960  TEE REDUCE 1/2X1/2X3/4 F1960  Flair-It 16817 Flair-It Pex Polybutylene 90 Degree Swivel Elbow
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16865 Swivel Tube Adapter Anderson Metal 53778-1212 Nylon Pipe Fitting Anderson Metal 53778-1208 Nylon Pipe Fitting
Toilet connection to PEX connection. Bar coded. AMC Hose Adapter, 3/4 X 3/4 in Nominal, GHT X MPT End, 150 psi Working, Nylon, Used to join Vinyl or Rubber Tubing AMC Hose Adapter, 3/4 X 1/2 in Nominal, GHT X MPT End, 150 psi Working, Nylon, Used to join Vinyl or Rubber Tubing
ADAPTER REDUCE 1/2F1960X3/4SWT Flair-It 16806 Flair-It Pex Polybutylene 90 Degree Elbow Flair-It? 16871 Tube to Pipe Adapter
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used for connecting icemaker fittings to PEX or Polybutylene tubing. Bar coded.
Genova 80430 Abs-DWV Fitting Anderson 738116-04 Street Pipe Elbow Anderson 738116-02 Street Pipe Elbow
Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
Anderson 738116-06 Street Pipe Elbow Anderson Metal 750065-05 Brass Compression Elbow ADAPTER REDUCE 3/4F1960 X1SWT
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. UPC individually bagged.
ELBOW SWIVEL 1/2F1960 X1/2FEM ADAPTER 1IN F1960 X3/4IN MIP  Anderson 53621-08 Hexagonal Pipe Plug
Bagged.
Genova Products 80630 ABS-DWV 45 Degree Elbow COUPLING 1IN F1960            Flair-It 16826 Flair-It Pex Polybutylene Tee3/4 x 3/4 x 1/2 Comp
Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
COUPLER REDUCE 1X3/4IN F1960  ADAPTER 3/4IN F1960 X 1IN MIP ADAPTER REDUCE 3/4F1960 X1 SWT
ELBOW DROPEAR 3/4F1960 X1/2FIP Worldwide Sourcing HG-1 Washing Machine Hose Connectors Flair-It 16805 Flair-It
Ensures a secure connection between clothes washer drain hoses and standpipes. Fit both 1-1/2" and 2" standpipes and most washing machine hoses 1" - 1-7/16" For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Anderson 756116-06 Street Pipe Elbow Anderson 50869-0402 Tube Elbow TEE REDUCE 3/4X1/2X3/4 F1960
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. UPC individually bagged.
SLEEVE 1/2IN F1960            ADAPTER SWIVEL 3/4F1960X3/4FEM Anderson 53621-16 Hexagonal Pipe Plug
Bagged.
Brass Craft PSC1094L Gas Leak Detectors ADAPTER 1F1960 X 1IN FEM SWT  Flair-It 16869 Swivel Tube Adapter
Used for natural, LP gas, mixed, manufactured, and LP gas-air mixtures. Toilet connection to PEX connection. Bar coded.
Genova Products 83830 ABS-DWV 90 Degree Long Sweep Elbow ADAPTER 1IN F1960 X 1IN MIP   Danco 36335B Hose Washer
Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. 5/8" hose size: 9/16"ID x 1"OD.
Flair-It 16834 Flair-It Pex Polybutylene 1/2 x 1/2 x 1/8 In Genova Products 80340 ABS-DWV Female Adapter Flair-It 16343 Transition Coupling
Used to connect icemaker fittings to PEX or Polybutylene tubing. Bar coded. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Couplings fit copper, PEX, Polybutylene or CPVC.
Anderson 738116-08 Street Pipe Elbow Flair-It 16827 Flair-It Pex Polybutylene Tee 3/4 x 3/4 x 3/4 Comp Flair-It 16825 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 3/4 Comp
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Anderson 53621-12 Hexagonal Pipe Plug Fernco PHG-1 Hose Grip Washing Machine Hose Connectors ADAPTER 1IN F1960 X1IN FIP
Bagged. Securely connects washer's drain hose to any standard laundry standpipe and holds it firmly in place. Fits both 2" and 1-1/2" standpipes and most washing machine hoses from 1" to 1-7/16" diameters. Built from strong, flexible PVC. Carded.
Anderson Metal 750068-0812 Brass Fittings Plumb Pak PP850-3 Utility Hoses STUBOUT 1/2IN F1960 X4X8 W/EAR
Three piece construction - nut, sleeve, and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. 3/4" Hose Female Connection one end, 1 end plain (no fitting). For use filling wringer-type washing machines, or wherever an extension is needed. Includes washer.
Flair-It 16824 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 1/2 Comp Genova Products 80640 ABS-DWV 45 Degree Elbow Anderson 03610 Pipe Reducing Hex Bushing
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used to change direction in piping in drain-waste-vent applications. Sometimes called an eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1/2 X 1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose
Flair-It 16830 Flair-It Elkhart 32704 Copper Fitting Anderson 53622-16 Hex Pipe Nipple
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. EPC Pipe Reducing Tee, 1/2 x 1/2 x 3/4 in Nominal Size, Copper, Wrot Copper Anderson Hex Pipe Nipple, Series: 53622-16, 1 in Nominal, MPT End, Nylon, For Plastic Tubing or Rubber Hose
ADAPTER REDUCE 3/4F1960 X1FIP Genova 82740 ABS-DWV Fitting Genova Products 82840 ABS-DWV 90 Degree Sanitary Elbow
Used to change direction from a fitting hub to a pipe in drain-waste-vent applications. Sometimes called a street eighth bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to change direction in piping in drain-waste-vent applications. Sometimes called a quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Elkhart 80009 Copper Fitting Plumb Pak PP850-8 Washing Machine Inlet Hose Anderson 03610 Pipe Reducing Hex Bushing
EPC Pipe Tee, 1/2 in Nominal Size, Copper, Wrot Copper Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling. Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/4 X 1/2 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose
Anderson 03610 Pipe Reducing Hex Bushing PLUG 1/2IN F1960 POLYALLOY    Plumb Pak PP850-2 Washing Machine Inlet Hose
Anderson Pipe Reducing Hex Bushing, Series: 03610, 1/2 X 3/8 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling.
Anderson 03610 Pipe Reducing Hex Bushing Anderson 53784-1212 Hose Adapter Danco 36334B Oval Hose Washer
Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/4 X 1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Anderson Hose Adapter, 3/4 in Nominal, Female Garden Hose X Male Garden Hose End, 3/4 in Inside Diameter, Nylon 5/8" hose size: 13/16"ID x 1-3/16"OD x 1/8" thick. Bagged.
Anderson 53780-1212 Hose Adapter TEE REDUCE 1INX1INX1/2IN F1960 Anderson 53622-06 Hex Pipe Nipple
Anderson Hose Adapter, 3/4 in Nominal, Male Garden Hose X Female Garden Hose End, 3/4 in Inside Diameter, Nylon Anderson Hex Pipe Nipple, Series: 53622-06, 3/8 in Nominal, MPT End, Nylon, For Plastic Tubing or Rubber Hose
ELBOW DROPEAR 3/4F1960 X3/4FIP Quarter Master 102-209 Replacement Washing Machine Valve Quarter Master 102-210 Replacement Washing Machine Valve
125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged. 125 PSI, chrome-plated, ball valve design, 3/4" hose thread, Hose threads comply with ANSI B1.20.7, threaded ends comply with ANSIS B1.20.1. Bagged.
Elkhart 32818 Copper Fitting Anderson 53774-12 Garden Hose Cap Genova 80440 Abs-DWV Fitting
EPC Pipe Tee, 1 in Nominal Size, Copper, Wrot Copper Anderson Garden Hose Cap, 3/4 in Nominal, FGHT End, Nylon Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Anderson 03610 Pipe Reducing Hex Bushing ELBOW 1IN F1960               Plumb Pak PP850-5 Mixer Hoses
Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/4 X 3/8 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Water mixer. 3/4" female connections. Ideal for use on outdoors and basement showers, basement floors, washing cars, laundry, lawns, etc. With two hose washers. "Y" fitting for high pressure.
Anderson 738116-12 Street Pipe Elbow Elkhart 32824 Copper Fitting Elkhart 32828 Copper Fitting
One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight. EPC Pipe Reducing Tee, 1 x 1 x 3/4 in Nominal Size, Copper, Wrot Copper EPC Pipe Reducing Tee, 1 x 1 x 1/2 in Nominal Size, Copper, Wrot Copper
Plumb Pak PP850-7 Washing Machine Inlet Hose SLEEVE 3/4IN F1960            Anderson 03610 Pipe Reducing Hex Bushing
Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1 X 1/2 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F
Genova Products 83840 ABS-DWV 90 Degree Long Sweep Elbow Anderson 53621-04 Hexagonal Pipe Plug TEE 1IN X 1IN X 1IN F1960
Used to change direction in piping in drain-waste-vent applications. Sometimes called a long turn quarter bend. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Bagged.
Plumb Pak PP850-4 Washing Machine Drain Hoses Flair-It 16347 Transition Coupling TEE REDUCE 1INX1INX3/4IN F1960
Washing machine drain hose with gooseneck tapered to fit 3/4", 7/8" or 1" washing machine drain. Couplings fit copper, PEX, Polybutylene or CPVC.
Anderson 53621-06 Hexagonal Pipe Plug Plumb Pak PP850-6 Washing Machine Hoses COUPLER 1/2POLY X1/2IN F1960
Bagged. One 90 degree elbow end fitting.
COUPLER 3/4IN X 1/2IN F1960   Anderson 03610 Pipe Reducing Hex Bushing Plumb Pak PP23821 Washing Machine Hoses
Anderson Pipe Reducing Hex Bushing, Series: 03610, 1 X 3/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose 3/4" FHT x 3/4" FHT. Bulk with flag label
Elkhart 32838 Copper Fitting Anderson 03610 Pipe Reducing Hex Bushing Anderson Metal 730081-04 Brass Compression Cap
EPC Pipe Reducing Tee, 1 x 3/4 x 3/4 in Nominal Size, Copper, Wrot Copper Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/4 X 1 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose UPC individually bagged.
Harvey's 093200 Washing Machine Fill Hoses Plumb Pak PP850-14 Washing Machine Hoses Anderson 03610 Pipe Reducing Hex Bushing
Featuring new red for hot/blue for cold, high burst pressure, braided, reinforced EPDM rubber hose. 3/4" female fittings on both ends connect to washer and water supply. Fitting washers included. Plumb Pak Washing Machine Hose, 3/4 in Nominal Size, 8 ft Length, Female Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/4 X 3/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F
PLUG 3/4IN F1960 POLYALLOY    Anderson Metal 730081-06 Brass Compression Fitting PEX VALVE WASH 1/2X3/4INMGH
UPC individually bagged. Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending
PEX VALVE WASH 1/2X3/4INMGH   Elkhart 32866 Copper Fitting Anderson 03610 Pipe Reducing Hex Bushing
Made of PPSU (polysulfone). Works on all Brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14,?cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 Deg. F at 100 P.S.I. Patent Pending EPC Pipe Tee, 1-1/4 in Nominal Size, Copper, Wrot Copper Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/2 X 1 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose
Worldwide Sourcing PMB-449 Washing Machine Drain Hoses Elkhart 32920 Copper Fitting COUPLER 1/2 F1960 POLYALLOY
Fits 3/4", 7/8", or 1" washing machine drain. EPC Pipe Reducing Tee, 1-1/2 x 1-1/2 x 1/2 in Nominal Size, Copper, Wrot Copper
Elkhart 32874 Copper Fitting Elkhart 32872 Copper Fitting Plumb Pak PP850-12 Dishwasher Discharge Hose
EPC Pipe Reducing Tee, 1-1/4 x 1-1/4 x 3/4 in Nominal Size, Copper, Wrot Copper EPC Pipe Reducing Tee, 1-1/4 x 1-1/4 x 1 in Nominal Size, Copper, Wrot Copper 5/8" I.D. x 6'.  With 2 clamps.
HSE DRAIN WSHG MACH CRGTD 10FT Elkhart 32918 Copper Fitting Fluidmaster 9WM48 No-Burst
EPC Pipe Reducing Tee, 1-1/2 x 1-1/2 x 3/4 in Nominal Size, Copper, Wrot Copper Both ends have 3/4" hose fitting. Each foot of No-Burst contains 250 feet of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel-plated brass hex nuts. 3/4" female hose connectors at both ends. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10-year warranty.
Plumb Pak PP23832 Washing Machine Hoses STUBOUT 3/4IN F1960 X4X8 W/EAR Anderson 738116-16 Street Pipe Elbow
3/4" FHT x 3/4" FHT. Bulk with flag label One piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads." Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2 1/2 turns past finger tight.
COUPLING 1/2IN F1960          ADAPTER 3/4IN F1960 X1/2IN FIP Anderson 53621-02 Hexagonal Pipe Plug
Bagged.
Anderson 03610 Pipe Reducing Hex Bushing Elkhart 32910 Copper Fitting ELBOW 1/2IN F1960 X1/2IN MIP
Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/8 X 1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose EPC Pipe Tee, 1-1/2 in Nominal Size, Copper, Wrot Copper
ADAPTER 1/2IN F1960 X1/2IN MIP Plumb Pak PP855-74 Dishwasher Discharge Hose Fluidmaster 9WM60 No-Burst
With 2 clamps. Both ends have 3/4" hose fitting. Each foot of No-Burst contains 250 feet of stainless steel wire. Non-toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel-plated brass hex nuts. 3/4" female hose connectors at both ends. Exceeds all pluming code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10-year warranty.
COUPLER 3/4POLY X3/4IN F1960  SLEEVE 1IN F1960