Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > THREAD SEALANT COMPOUNDS
Sort By:
1
Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve Anderson Metals P60P Tube Sleeve
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
Genova Products 80120 ABS-DWV Coupling Genova Products 80115 ABS-DWV Coupling Anderson Metals PLL 760 Compression Sleeve
Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Anderson Metals PLL 760 Compression Sleeve Genova Products 80415 ABS-DWV Male Adapter Genova 81815 Abs-DWV Fitting
Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 81820 ABS-DWV Plub Genova 81614 Abs-DWV Fitting Hancor FCE0B030000 External Single Wall Drain End Cap 3 in W
Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Conventional threaded cleanout fitting solvent welds into fitting hub and adapts to male threaded plug. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved.
FITTING DRAIN FLEX COUPLER 4IN FITTING PIPE CONNECTOR UNIVERS Genova Products 80130 ABS-DWV Coupling
For joining 2 cut pieces of flex-Drain (not included), Use to adapt FLEX-Drain to wyes and tees to help provide good fit and function, Adapts FLEX-Drain to end caps and pop-up emitters (caps and emitters not included), Female connections, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit, Maximum working pressure of 70 psi, Polypropylene construction, Rated for soil drain and underground use. Features inner dimensions that connects to 3 in. pipe and an outer dimension that connects to 4 in. pipe. The most economical solution for connecting Flex-Drain 3 in. and 4 in. Corrugated pipe and 4 in. PVC. Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova Products 80315 ABS-DWV Female Adapter Elkhart 32048 Copper Fitting Genova 82311 Abs-DWV Fitting
Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. EPC Pipe Reducer, 1/2 x 3/8 in Nominal Size, FTG x Copper, Copper Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova 81619 Abs-DWV Fitting Flair-It 16841 Flair-It Pex Polybutylene Adapter Elkhart 32044 Copper Fitting
Conventional threaded cleanout fitting solvent welds into fitting hub and adapts to male threaded plug. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. EPC Pipe Reducer, 3/8 x 1/4 in Nominal Size, FTG x Copper, Copper
Genova Products 81830 ABS-DWV Plub Elkhart 32050 Copper Fitting Genova Products 82315 ABS-DWV Trap Adapter
Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. EPC Pipe Reducer, 1/2 x 1/4 in Nominal Size, FTG x Copper, Copper Utilized to adapt ABS fitting hub to tubular traps at wall or floor. Solvent welds into an 1-1/2" DWV fitting hub. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Hancor 0412AA Single Wall Corrugated External Snap Coupler Flair-It 16842 Flair-It Genova Products 82215 ABS-DWV Female Trap Adapter
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Elkhart 32064 Copper Fitting Flair-It 16860 Tube Cap Anderson 03610 Pipe Reducing Hex Bushing
EPC Pipe Reducer, 3/4 x 1/2 in Nominal Size, FTG x Copper, Copper Used for capping off PEX fittings. Bar coded. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/2 X 1-1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F
Harvey's 023015-48 Pipe Joint Compound Genova Products 82211 ABS-DWV Female Trap Adapter Genova Products 80121 ABS-DWV Reducing Coupling
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Utilized to adapt ABS pipe to tubular traps at wall or floor. Solvent welds over 1-1/2" DWV pipe. Sometimes called a Marvel. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Genova 80320 Abs-DWV Fitting Harvey 030005-144 Pipe Thread Compound Genova 80420 Abs-DWV Fitting
Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Flair-It 16859 Tube Cap Hancor 0432AA Single Wall Solid Snap End Cap Genova 88615 Abs-DWV Fitting
Used for capping off PEX fittings. Bar coded. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Spigot x FIP
BrassCraft 294F Half Union Adapter Flair-It 16855 Flair-It Pex Polybutylene Coupling Genova Products 81840 ABS-DWV Plub
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Used to form a removable closure. These threaded plugs offer a corrosion proof alternative to metal plugs. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Oatey 31229 Great White Anderson Metal 750097-0604 Brass Flare  Adapter Flair-It 16872 Flair-It Pex Polybutylene Adapter 3/4Comp x 3/4 MPT BSP
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included. Anderson Tube Adapter, 1/4 x 3/8 in Nominal Size, Compression, Brass For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16870 Flair-It Hancor 0433AA Single Wall Solid Internal Snap Plug Anderson 750066-0606 3-Piece Tubing Coupling
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For horizontal applications only. CSA approved. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Flair-It 16812 Flair-It Anderson 750066-0302 3-Piece Reducing Tubing Coupling Flair-It 16800 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
BrassCraft 293M Half Union Adapter BrassCraft MAU1-10-8 Gas Adapter Flair-It 26790 Flair-It Pex Polybutylene Adapter
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. For hot and cold water. Inserts into Polybutylene tubing allowing you to use PEX fittings with Polybutylene tubing.  3 Per Bag.
Flair-It 16799 Flair-It FITTING DWNSPT ADPT 3X4IN BLK FITTING DOWNSPOUT ADPT 2INX3IN
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Polypropylene construction, Adapts to fit 3 in. or 4 in. corrugated pipe and 4 in. PVC pipe (not included), DWV applications, Maximum working pressure of 70 psi, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit, Flexible to fit most angles and provide easy connections. Polypropylene construction provides durability, Flexible design is ideal for tight spots and curved spaces, Provides easy and versatile connections, Fits 4 inch pipe. Compatible with 2 in. x 3 in. downspouts, 70 psi maximum pressure rating, Exceeds ASTM standards.
Elkhart 32072 Copper Fitting BrassCraft MAU2-10-8 Gas Adapter Flair-It 16840 Flair-It
EPC Pipe Reducer, 1 x 3/4 in Nominal Size, FTG x Copper, Copper Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Anderson Metal 754046-0502 Brass Flare Coupling Flair-It 16862 Tube Plug Flair-It 16810 Flair-It
UPC individually bagged. Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16852 Flair-It Flair-It 16868 Flair-It Pex Polybutylene Adapter Flair-It 16815 Flair-It
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Flair-It 16853 Flair-It Flair-It 16847 Flair-It Flair-It 16863 Tube Plug
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used for inserting a plug into the end of a pipe. Bar coded.
Flair-It 16803 Flair-It Pex Polybutylene 90 Degree Elbow Anderson Metals 730061-10 Compression Nut Flair-It 16858 Flair-It Pex Polybutylene Adapter
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
BrassCraft PSSL-14 Gas Dryer Adapter Harvey's 029035 Pipe Thread Compound Genova 88620 ABS-DWV Fitting
For 1/4" ID (3/8" OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8" female pipe thread. 5.5"L x 3.8"W x .6"D Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Spigot x FIP
Hancor 0462AA Single Wall Clay Snap Adapter FITTING ELBOW/CONNECT FLEX 4IN Flair-It 16850 Flair-It
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Polypropylene construction, Expands up to 21 in. to reach pipes that have been cut short and to help repair damaged sections of pipe, Flexible to create angles or turns, Maximum working pressure of 70 psi, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit,  Adapts to fit 3 in. or 4 in. corrugated pipe and 4 in. PVC pipe (not included), DWV applications For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16848 Flair-It Pex Polybutylene Adapter Flair-It 16873 Swivel Nut Coupling Genova Products 80140 ABS-DWV Coupling
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. Used to join straight lengths of pipe in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
BrassCraft PSSC-62 Gas Supply Adapter FITTING ADAPTER GAS 3/8IN MIP Rectorseal 23710 T-Plus 2 Pipe Thread Sealant
For corrugated tube. Recommended for gas range connections. 3/8" OD Flare x 3/8" MIP tapped 1/8 FIP. For use with gas appliances. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
NDS 248 Corrugated Drain Fitting BrassCraft PSSC-66 Gas Supply Adapter Plumb Pak PP854-2 Pipe Joint Compound
Extra wide, provides more area for channel connections. Use with 400 SPEE-D Series For corrugated tube. Recommended for gas range connections. Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing
BrassCraft PSSL-16 Gas Supply Union Brass-Craft FU3-6 Pipe Union Flair-It 16802 Flair-It
For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8'' female pipe thread. For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For hot and cold water. 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16820 Flair-It Flair-It 16874 Swivel Nut Coupling Flair-It 16861 Tube Cap
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded. Used for capping off PEX fittings. Bar coded.
Brass-Craft PSSC-63 Male Half Union Genova Products 80330 ABS-DWV Female Adapter BrassCraft MAU1-10-12 Gas Adapter
For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified.
Hancor 0364AA Corrugated Drain Downspout Adapter BrassCraft MAU2-10-12 Gas Adapter Flair-It 16845 Flair-It Pex Polybutylene Coupling
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Fitting for  5/8" O.D. tube (brass).  New style 15/16"-16 thread. A.G.A. design certified. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded.
Flair-It 16816 Flair-It Pex Polybutylene 90 Degree Swivel Elbow Rectorseal 25790 Pipe Thread Sealant Brass-Craft PSSL-15 Female Pipe Union
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. For 1/4'' ID (3/8'' OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors.
Anderson 53622-08 Hex Pipe Nipple Hancor 0417AA Single Wall Corrugated Internal Snap Coupler NDS 249 Offset Drain End Cap Adapter
Anderson Hex Pipe Nipple, Series: 53622-08, 1/2 in Nominal, MPT End, Nylon, For Plastic Tubing or Rubber Hose Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC or metal. CSA approved. Fits #TTABO040750 bottom outlet adapter. No channel cutting required. Usewith 400 SPEE-D series.
BrassCraft 2294M Half Union Adapter Flair-It 16846 Flair-It Pex Polybutylene Coupling Brass-Craft PSSC-64 Male Half Union
For use with F0-6 (9/16-24) Flare Nut - IBM # 9166414. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. For 1/2'' I.D. (5/8'' OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2'' MIP end tapped 3/8'' FIP thread; 3/4'' MIP tapped 1/2'' FIP.
Brass-Craft PSSD-43 Male Half Union Elkhart 32076 Copper Fitting Genova Products 81629 ABS-DWV Cleanout Body
For 3/8'' ID (1/2'' OD) corrugated tube. Recommended for fixed air heater, gas range, furnace, and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8'' FIP thread. EPC Pipe Reducer, 1 x 1/2 in Nominal Size, FTG x Copper, Copper Conventional threaded cleanout fitting solvent welds into fitting hub and adapts to male threaded plug. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Flair-It 16831 Flair-It Pex Polybutylene Tee 3/8 x 3/8 x 3/8 Comp Flair-It 16864 Tube Plug Flair-It 16844 Transition Coupling
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used for inserting a plug into the end of a pipe. Bar coded. For hot and cold water. Transition from 3/4" PEX to 3/4" Polybutylene. Bar coded.
Flair-It 16809 Flair-It BrassCraft PSSD-42 Gas Supply Union Oatey 31230 Great White
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For 3/8'' I.D. (1/2'' OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces, and water heater connections. Use with PlumbShop SD or RSD Series connectors. Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Brush included.
Hancor 0464AA Corrugated Drain Downspout Adapter BrassCraft M40-10 Gas Tube Cap Genova 80132 Abs-DWV Fitting
Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. For use with natural, manufactured, mixed, liquefied petroleum gases and LP gas-air mixtures. Up to 1/2 psi maximum. Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Flair-It 16817 Flair-It Pex Polybutylene 90 Degree Swivel Elbow Flair-It 16865 Swivel Tube Adapter Anderson Metal 53778-1212 Nylon Pipe Fitting
For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. Bar coded. Toilet connection to PEX connection. Bar coded. AMC Hose Adapter, 3/4 X 3/4 in Nominal, GHT X MPT End, 150 psi Working, Nylon, Used to join Vinyl or Rubber Tubing
Anderson Metal 53778-1208 Nylon Pipe Fitting Anderson Metal 750097-0806 Brass Adapter Hancor 0465AA Corrugated Large Downspout Adapter
AMC Hose Adapter, 3/4 X 1/2 in Nominal, GHT X MPT End, 150 psi Working, Nylon, Used to join Vinyl or Rubber Tubing Anderson Tube Adapter, 1/2 x 3/8 in Nominal Size, Compression, Brass Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved.
FITTING DRAIN FLEXIBLE 4IN T/Y Flair-It 16806 Flair-It Pex Polybutylene 90 Degree Elbow Flair-It? 16871 Tube to Pipe Adapter
Polypropylene construction, Adapts to fit 3 in. or 4 in. corrugated pipe and 4 in. PVC pipe (not included), Flexes to become a wye or tee, For DWV applications, Maximum working pressure of 70 psi, Minimum working temperature of -50 degrees Fahrenheit and a maximum working temperature of 150 degrees Fahrenheit, Bends to fit most angles. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Used for connecting icemaker fittings to PEX or Polybutylene tubing. Bar coded.
Genova 80430 Abs-DWV Fitting Brass Craft PS1087 Seal 'N Check Kit Anderson 750066-0406 3-Piece Tubing Coupling
Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Three piece construction - nut, sleeve, and body. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F. to +250 degrees F. temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil, and vacuum lines. UPC individually bagged.
Elkhart 32084 Copper Fitting Anderson Metals P60P Tube Sleeve Anderson 53621-08 Hexagonal Pipe Plug
EPC Pipe Reducer, 1-1/4 x 3/4 in Nominal Size, FTG x Copper, Copper Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Bagged.
Plumb Pak PP854-1 Pipe Thread Sealant Flair-It 16826 Flair-It Pex Polybutylene Tee3/4 x 3/4 x 1/2 Comp Harvey's 023030 Pipe Joint Compound
Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Harvey's 025020 Pipe Thread Compound Anderson Metal 738105-0604 Brass Pipe Fitting Anderson Metal 738105-0602 Brass Pipe Fitting
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Anderson Reducing Elbow, 3/8 x 1/4 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications Anderson Reducing Elbow, 3/8 x 1/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Elkhart 32082 Copper Fitting Worldwide Sourcing HG-1 Washing Machine Hose Connectors Flair-It 16805 Flair-It
EPC Pipe Reducer, 1-1/4 x 1 in Nominal Size, FTG x Copper, Copper Ensures a secure connection between clothes washer drain hoses and standpipes. Fit both 1-1/2" and 2" standpipes and most washing machine hoses 1" - 1-7/16" For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Genova 80131 ABS-DWV Fitting Anderson 54840-06 Space Heater Tube Cap Anderson Metal 738105-0806 Brass Pipe Fitting
Used to reduce or increase pipe sizes in drain-waste-vent applications. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA. 9/16''-24 fine thread flare end for space heaters. Bagged with flag tag. Anderson Reducing Elbow, 1/2 x 3/8 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Anderson 53621-16 Hexagonal Pipe Plug Flair-It 16869 Swivel Tube Adapter Hancor 0490AA Single Wall Snap Elbow
Bagged. Toilet connection to PEX connection. Bar coded. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved.
Flair-It 16834 Flair-It Pex Polybutylene 1/2 x 1/2 x 1/8 In Hancor 0421AA Single Wall Snap Tee Genova Products 80340 ABS-DWV Female Adapter
Used to connect icemaker fittings to PEX or Polybutylene tubing. Bar coded. Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Adapts to standard male pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Flair-It 16343 Transition Coupling Flair-It 16827 Flair-It Pex Polybutylene Tee 3/4 x 3/4 x 3/4 Comp Flair-It 16825 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 3/4 Comp
Couplings fit copper, PEX, Polybutylene or CPVC. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Anderson 53621-12 Hexagonal Pipe Plug Fernco PHG-1 Hose Grip Washing Machine Hose Connectors Plumb Pak PP850-3 Utility Hoses
Bagged. Securely connects washer's drain hose to any standard laundry standpipe and holds it firmly in place. Fits both 2" and 1-1/2" standpipes and most washing machine hoses from 1" to 1-7/16" diameters. Built from strong, flexible PVC. Carded. 3/4" Hose Female Connection one end, 1 end plain (no fitting). For use filling wringer-type washing machines, or wherever an extension is needed. Includes washer.
Rectorseal 31631 Tru-Blu Rectorseal 23631 T-Plus 2 Flair-It 16824 Flair-It Pex Polybutylene Tee 3/4 x 1/2 x 1/2 Comp
Fast drying, adhesive thread sealant especially suited for high vibration environments such as refrigeration or compressor applications. Stays flexible - designed for areas of high vibration and thermal expansion/contraction. Can also be used as a positive lock and seal on threaded fasteners. Lead free and contains no metal. For use with water (hot or cold). Brushable from 20 degree F to 140 degree F. Excellent as a gasket adhesive on flanges. Low odor, non-separating. Lubricates and protects threads. Easy application - brush top applicator. Meets Federal Specification TT-S-1732. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded.
Harvey's 029048 Pipe Thread Compound Anderson 54806-0606 Tube To Pipe Coupling Anderson 03610 Pipe Reducing Hex Bushing
Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Brushtop bottle. Two piece construction - nut and body. Use with copper, brass, aluminum or steel tubing. -65 degrees F. to +250 degrees F. temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration, and vacuum. UPC individually bagged. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1/2 X 1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose
Elkhart 32094 Copper Fitting Anderson Metals 60P Tube Sleeve Anderson Metals 60P Tube Sleeve
EPC Pipe Reducer, 1-1/2 x 3/4 in Nominal Size, FTG x Copper, Copper Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required.
Oatey 15420 Pro Dope Flair-It 16830 Flair-It Anderson Metal 738105-1208 Brass Pipe Fitting
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. For hot and cold water. 3/8" and 1/2" fits PEX or Polybutylene tubing only. 3/4" fits PEX tubing only, to use on Polybutylene use a PEX to Polybutylene transition fitting. Bar coded. Anderson Reducing Elbow, 3/4 x 1/2 in Nominal, FIP End, 90 deg, 200 psi Working, Brass, Red, 150 deg F, For Potable Water Applications
Anderson 53622-16 Hex Pipe Nipple Rectorseal 25631 Pipe Thread Sealant Genova 81639 Abs-DWV Fitting
Anderson Hex Pipe Nipple, Series: 53622-16, 1 in Nominal, MPT End, Nylon, For Plastic Tubing or Rubber Hose Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Conventional threaded cleanout fitting solvent welds into fitting hub and adapts to male threaded plug. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Oatey 15804 Hercules Pipe Thread Sealant Plumb Pak PP850-8 Washing Machine Inlet Hose Anderson 03610 Pipe Reducing Hex Bushing
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling. Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/4 X 1/2 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose
Anderson 03610 Pipe Reducing Hex Bushing Hancor 0422AA Single Wall Pipe Wye Plumb Pak PP850-2 Washing Machine Inlet Hose
Anderson Pipe Reducing Hex Bushing, Series: 03610, 1/2 X 3/8 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F Structurally designed for heavy-duty demanding field drainage applications and needs in place of concrete, PVC, or metal. CSA approved. Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling.
Anderson 03610 Pipe Reducing Hex Bushing Anderson 53784-1212 Hose Adapter Genova 88630 Abs-DWV Fitting
Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/4 X 1/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Anderson Hose Adapter, 3/4 in Nominal, Female Garden Hose X Male Garden Hose End, 3/4 in Inside Diameter, Nylon Spigot x FIP
Anderson 53780-1212 Hose Adapter Anderson Metals PLF 760 Compression Sleeve Anderson 53622-06 Hex Pipe Nipple
Anderson Hose Adapter, 3/4 in Nominal, Male Garden Hose X Female Garden Hose End, 3/4 in Inside Diameter, Nylon Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Anderson Hex Pipe Nipple, Series: 53622-06, 3/8 in Nominal, MPT End, Nylon, For Plastic Tubing or Rubber Hose
Harvey's 023045 Pipe Joint Compound Anderson 53774-12 Garden Hose Cap Genova 80440 Abs-DWV Fitting
White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape. Anderson Garden Hose Cap, 3/4 in Nominal, FGHT End, Nylon Adapts to standard female pipe threads in drain-waste-vent applications. Teflon thread tape is recommended for threaded joints. Conforms to ASTM D2661 and NSF-DWV. Accepted by FHA.
Anderson 03610 Pipe Reducing Hex Bushing Harvey's 025050 Pipe Thread Compound Plumb Pak PP850-5 Mixer Hoses
Anderson Pipe Reducing Hex Bushing, Series: 03610, 3/4 X 3/8 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 F to +400 degrees Fahrenheit; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines.  Brushtop bottle. Water mixer. 3/4" female connections. Ideal for use on outdoors and basement showers, basement floors, washing cars, laundry, lawns, etc. With two hose washers. "Y" fitting for high pressure.
Plumb Pak PP850-7 Washing Machine Inlet Hose Anderson 54800-06 Space Heater Tube Nut Anderson 03610 Pipe Reducing Hex Bushing
Rubber washing machine hose. For both hot or cold water. I.O. couplings on straight end for positive seal. Specially compounded to resist hot water softening action. Burst pressure, 800 pounds. Highest quality. Identical to original equipment hose. Female and female coupling. 9/16-24 thread. Bagged with flag tag. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1 X 1/2 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F
Oatey 34055 Plumbing Access Panel Anderson 53621-04 Hexagonal Pipe Plug Oatey 15427 Pro Dope
Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. Bagged. Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray.
Plumb Pak PP850-4 Washing Machine Drain Hoses Flair-It 16347 Transition Coupling Anderson 53621-06 Hexagonal Pipe Plug
Washing machine drain hose with gooseneck tapered to fit 3/4", 7/8" or 1" washing machine drain. Couplings fit copper, PEX, Polybutylene or CPVC. Bagged.
Plumb Pak PP850-6 Washing Machine Hoses Oatey 34045 Plumbing Access Panel Anderson Metals PLF 760 Compression Sleeve
One 90 degree elbow end fitting. Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
Oatey 15806 Hercules Pipe Thread Sealant Anderson 03610 Pipe Reducing Hex Bushing Rectorseal 25551 Pipe Thread Sealant
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulic resistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Anderson Pipe Reducing Hex Bushing, Series: 03610, 1 X 3/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932.
Plumb Pak PP23821 Washing Machine Hoses Anderson 03610 Pipe Reducing Hex Bushing Rectorseal 23551 T-Plus 2 Pipe Thread Sealant
3/4" FHT x 3/4" FHT. Bulk with flag label Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/4 X 1 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Anderson Metals 60P Tube Sleeve Harvey's 093200 Washing Machine Fill Hoses Plumb Pak PP850-14 Washing Machine Hoses
Use with copper, brass, aluminum, or plastic tubing. -65 degrees F to +250 degrees F temperature range.  For ID copper tube size, reduce O.D. size by 1/8". Easy to disassemble - no flaring tool required. Featuring new red for hot/blue for cold, high burst pressure, braided, reinforced EPDM rubber hose. 3/4" female fittings on both ends connect to washer and water supply. Fitting washers included. Plumb Pak Washing Machine Hose, 3/4 in Nominal Size, 8 ft Length, Female
Anderson 03610 Pipe Reducing Hex Bushing Genova 88640 Abs-DWV Fitting Fluidmaster AP0808 Access Panels
Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/4 X 3/4 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F Spigot x FIP Easy to install, no framing required, works in walls and ceilings up to 3/4" thick, pops in and out of position, no visible clamps or screws. Great for spa pumps, security systems, computer-audio-tv cables.
Anderson 03610 Pipe Reducing Hex Bushing Anderson Metals 750060-14 Compression Sleeve Worldwide Sourcing PMB-449 Washing Machine Drain Hoses
Anderson Pipe Reducing Hex Bushing, Series: 03610, 1-1/2 X 1 in Nominal, Male X Female End, 150 psi Working, Nylon, 120 deg F, For Plastic Tubing or Rubber Hose Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines. Fits 3/4", 7/8", or 1" washing machine drain.
Oatey 34056 Plumbing Access Panel Plumb Pak PP850-12 Dishwasher Discharge Hose Anderson Metals BG3 Compression Sleeve
Provides a service area for plumbing, electrical, security systems, telephone, TV, computer cables and sprinkler system applications. Reversible - can be flush mounted and surface mounted, no framing required. Made from high-impact ABS. UV-stabilized for outdoor use. Textured surface can be painted, wallpapered or tiled. 5/8" I.D. x 6'.  With 2 clamps. Use with copper, brass, aluminum, or plastic tubing. Primary use: water, gasoline, oil, and vacuum lines.
HSE DRAIN WSHG MACH CRGTD 10FT Fluidmaster 9WM48 No-Burst Plumb Pak PP23832 Washing Machine Hoses